In this study, a three dimensional(3D) numerical model of six-degrees-of-freedom(6DOF) is applied to simulate the water entries of twin spheres side-by-side at different lateral distances and time intervals.The turbul...In this study, a three dimensional(3D) numerical model of six-degrees-of-freedom(6DOF) is applied to simulate the water entries of twin spheres side-by-side at different lateral distances and time intervals.The turbulence structure is described using the shear-stress transport k-ω(SST k-ω) model, and the volume of fluid(VOF) method is used to track the complex air-liquid interface. The motion of spheres during water entry is simulated using an independent overset grid. The numerical model is verified by comparing the cavity evolution results from simulations and experiments. Numerical results reveal that the time interval between the twin water entries evidently affects cavity expansion and contraction behaviors in the radial direction. However, this influence is significantly weakened by increasing the lateral distance between the two spheres. In synchronous water entries, pressure is reduced on the midline of two cavities during surface closure, which is directly related to the cavity volume. The evolution of vortexes inside the two cavities is analyzed using a velocity vector field, which is affected by the lateral distance and time interval of water entries.展开更多
This contribution describes development and application of a user-friendly finite element program,UT3PC, to address three important problems in underground coal mine design:(1) safety of main entries,(2) barrier pilla...This contribution describes development and application of a user-friendly finite element program,UT3PC, to address three important problems in underground coal mine design:(1) safety of main entries,(2) barrier pillar size needed for entry protection, and(3) safety of bleeder entries during the advance of an adjacent longwall panel.While the finite element method is by far the most popular engineering design tool of the digital age, widespread use by the mining community has been impeded by the relatively high cost of and the need for lengthy specialized training in numerical methods.Implementation of UT3PC overcomes these impediments in three easy steps.First, a material properties file is prepared for the considered site.Next, mesh generation is automatic through an interactive process.A third and last step is simply execution of the program.Examples using data from several western coal mines illustrate the ease of using the application for analysis of main entries, barrier pillars, and bleeder entry safety.展开更多
Evaluation for blast resistances of rice entries of 20th to 23rd International Rice Blast Nursery (IRBN) was conducted at CNRRI during 1990-1993. The resistance to seedling blast (SB) was evaluated in a greenhouse at ...Evaluation for blast resistances of rice entries of 20th to 23rd International Rice Blast Nursery (IRBN) was conducted at CNRRI during 1990-1993. The resistance to seedling blast (SB) was evaluated in a greenhouse at 3-4 leaf stage with artificial inoculation while resistance to leaf blast (LB) and neck blast (NB) were evaluated in the natural field as instructed by the International Network of Genetic Evaluation for Rice (INGER). Materials with high level of blast resistance and good agronomic traits were selected and展开更多
Let(g_(n))_(n≥1) be a sequence of independent and identically distributed positive random d×d matrices and consider the matrix product G_(n)=g_(n)…g_1.Under suitable conditions,we establish the Berry-Esseen bou...Let(g_(n))_(n≥1) be a sequence of independent and identically distributed positive random d×d matrices and consider the matrix product G_(n)=g_(n)…g_1.Under suitable conditions,we establish the Berry-Esseen bounds on the rate of convergence in the central limit theorem and Cramer-type moderate deviation expansions,for any matrix norm ‖G_(n)‖ of G_(n),its entries G_(n)^(i,j) and its spectral radius ρ(G_(n)).Extended versions of their joint law with the direction of the random walk G_(n)x are also established,where x is a starting point in the unit sphere of R~d.展开更多
The spike protein(S)of SARS-CoV-2 is responsible for viral attachment and entry,thus a major factor for host suscep-tibility,tissue tropism,virulence and pathogenicity.The S is divided with S1 and S2 region,and the S1...The spike protein(S)of SARS-CoV-2 is responsible for viral attachment and entry,thus a major factor for host suscep-tibility,tissue tropism,virulence and pathogenicity.The S is divided with S1 and S2 region,and the S1 contains the receptor-binding domain(RBD),while the S2 contains the hydrophobic fusion domain for the entry into the host cell.Numerous host proteases have been implicated in the activation of SARS-CoV-2 S through various c leavage sites.In this article,we review host proteases including furin,trypsin,transmembrane protease serine 2(TMPRSS2)and cathepsins in the activation of SARS-CoV-2 S.Many betacoronaviruses including SARS-CoV-2 have polybasic residues at the S1/S2 site which is subjected to the cleavage by furin.The S1/S2 cleavage facilitates more assessable RBD to the receptor ACE2,and the binding triggers further conformational changes and exposure of the S2'site to proteases such as type Il transmembrane serine proteases(TTPRs)including TMPRSS2.In the presence of TMPRSS2 on the target cells,SARS-CoV-2 can utilize a direct entry route by fusion of the viral envelope to the cellular membrane.In the absence of TMPRSS2,SARS-CoV-2 enter target cells via endosomes where multiple cathepsins cleave the S for the successful entry.Additional host proteases involved in the cleavage of the S were discussed.This article also includes roles of 3C-like protease inhibitors which have inhibitory activity against cathepsin L in the entry of SARS-CoV-2,and discussed the dual roles of such inhibitors in virus replication.展开更多
Chronic hepatitis B virus(HBV)infection affects over 295 million people globally and an estimated 1.6 million people in the United States.It is associated with significant morbidity and mortality due to cirrhosis,live...Chronic hepatitis B virus(HBV)infection affects over 295 million people globally and an estimated 1.6 million people in the United States.It is associated with significant morbidity and mortality due to cirrhosis,liver failure,and liver cancer.Antiviral therapy with oral nucleos(t)ide analogues is associated with high rates of virologic suppression,which in turn has been associated with a decreased risk of liver complications.However,current antiviral regimens are limited by concerns with adverse effects,adherence,resistance,long-term treatment,and ongoing risk for liver events.Novel investigational agents are currently in development and are targeted at achieving functional cure with sustained hepatitis B surface antigen(HBsAg)loss and suppression of HBV DNA.Herein we review key evidence from phases II and III trials defining the efficacy and safety profiles for key investigational agents for functional cure of chronic hepatitis B,including core/capsid inhibitors,entry inhibitors,RNA interference(siRNA/ASO),HBsAg inhibitors,Toll-like receptor agonists,checkpoint inhibitors,and therapeutic vaccines.展开更多
The CALPHAD thermodynamic databases are very useful to analyze the complex chemical reactions happening in high temperature material process.The FactSage thermodynamic database can be used to calculate complex phase d...The CALPHAD thermodynamic databases are very useful to analyze the complex chemical reactions happening in high temperature material process.The FactSage thermodynamic database can be used to calculate complex phase diagrams and equilibrium phases involving refractories in industrial process.In this study,the FactSage thermodynamic database relevant to ZrO_(2)-based refractories was reviewed and the application of the database to understanding the corrosion of continuous casting nozzle refractories in steelmaking was presented.展开更多
The formation of axonal spheroid is a common feature following spinal cord injury.To further understand the source of Ca^(2+)that mediates axonal spheroid formation,we used our previously characterized ex vivo mouse s...The formation of axonal spheroid is a common feature following spinal cord injury.To further understand the source of Ca^(2+)that mediates axonal spheroid formation,we used our previously characterized ex vivo mouse spinal cord model that allows precise perturbation of extracellular Ca^(2+).We performed twophoton excitation imaging of spinal cords isolated from Thy1YFP+transgenic mice and applied the lipophilic dye,Nile red,to record dynamic changes in dorsal column axons and their myelin sheaths respectively.We selectively released Ca^(2+)from internal stores using the Ca^(2+)ionophore ionomycin in the presence or absence of external Ca^(2+).We reported that ionomycin dose-dependently induces pathological changes in myelin and pronounced axonal spheroid formation in the presence of normal 2 m M Ca^(2+)artificial cerebrospinal fluid.In contrast,removal of external Ca^(2+)significantly decreased ionomycin-induced myelin and axonal spheroid formation at 2 hours but not at 1 hour after treatment.Using mice that express a neuron-specific Ca^(2+)indicator in spinal cord axons,we confirmed that ionomycin induced significant increases in intra-axonal Ca^(2+),but not in the absence of external Ca^(2+).Periaxonal swelling and the resultant disruption in the axo-myelinic interface often precedes and is negatively correlated with axonal spheroid formation.Pretreatment with YM58483(500 n M),a well-established blocker of store-operated Ca^(2+)entry,significantly decreased myelin injury and axonal spheroid formation.Collectively,these data reveal that ionomycin-induced depletion of internal Ca^(2+)stores and subsequent external Ca^(2+)entry through store-operated Ca^(2+)entry contributes to pathological changes in myelin and axonal spheroid formation,providing new targets to protect central myelinated fibers.展开更多
This paper presents a novel experiment to observe the whole water entry process of a free-falling sphere into a regular wave.A time-accurate synchronizing system modulates the moment elaborately to ensure the sphere i...This paper presents a novel experiment to observe the whole water entry process of a free-falling sphere into a regular wave.A time-accurate synchronizing system modulates the moment elaborately to ensure the sphere impacting onto the water surface at the desirable wave phase.Four high-speed cameras focus locally to measure the high-precision size of the cavity evolution.Meanwhile,the aggregated field view of the camera array covers both the splash above the free surface and the entire cavity in the wave.The detailed methodologies are described and verified for the hardware set-up and the image post-processing.The theoretical maximum deviation is 1.7%on the space scale.The integral morphology of the cavity is captured precisely in the coordinate system during the sphere penetrates through the water at four representative wave phases and the still water.The result shows that the horizontal velocity of the fluid particle in the wave impels the cavity and changes the shape distinctly.Notably,the wave motion causes the cavity to pinch offearlier at the wave trough phase and later at the wave crest phase than in the still water.The wave motion influences the falling process of the sphere slightly in the present parameters.展开更多
We propose an eye-shaped keyboard for high-speed text entry in virtual reality (VR), having the shape of dual eyes with characters arranged along the curved eyelids, which ensures low density and short spacing of the ...We propose an eye-shaped keyboard for high-speed text entry in virtual reality (VR), having the shape of dual eyes with characters arranged along the curved eyelids, which ensures low density and short spacing of the keys. The eye-shaped keyboard references the QWERTY key sequence, allowing the users to benefit from their experience using the QWERTY keyboard. The user interacts with an eye-shaped keyboard using rays controlled with both the hands. A character can be entered in one step by moving the rays from the inner eye regions to regions of the characters. A high-speed auto-complete system was designed for the eye-shaped keyboard. We conducted a pilot study to determine the optimal parameters, and a user study to compare our eye-shaped keyboard with the QWERTY and circular keyboards. For beginners, the eye-shaped keyboard performed significantly more efficiently and accurately with less task load and hand movement than the circular keyboard. Compared with the QWERTY keyboard, the eye-shaped keyboard is more accurate and significantly reduces hand translation while maintaining similar efficiency. Finally, to evaluate the potential of eye-shaped keyboards, we conducted another user study. In this study, the participants were asked to type continuously for three days using the proposed eye-shaped keyboard, with two sessions per day. In each session, participants were asked to type for 20min, and then their typing performance was tested. The eye-shaped keyboard was proven to be efficient and promising, with an average speed of 19.89 words per minute (WPM) and mean uncorrected error rate of 1.939%. The maximum speed reached 24.97 WPM after six sessions and continued to increase.展开更多
In view of the service failure and low continuous casting production efficiency due to the corrosion of refractories at the slag-line in submerged entry nozzles,a submerged entry nozzle for low-carbon aluminum killed ...In view of the service failure and low continuous casting production efficiency due to the corrosion of refractories at the slag-line in submerged entry nozzles,a submerged entry nozzle for low-carbon aluminum killed steel continuous casting in one steel plant was sampled and taken as the research object to analyze the causes and the mechanism of refractory corrosion at the slag-line.The results show that the core issue of the corrosion and necking of the slag-line materials is that the slag-line material are eroded,dissolved,and reacted by the mold flux gradually.Therefore,it is important to suppress or avoid the contact and reaction between the mold flux and slag-line materials.展开更多
Short hole investigations relevant to gas turbine (GT) hot walls cooling heat transfer techniques, were carried out using computational fluid dynamics (CFD) combined with conjugate heat transfer (CHT) code. The CFD so...Short hole investigations relevant to gas turbine (GT) hot walls cooling heat transfer techniques, were carried out using computational fluid dynamics (CFD) combined with conjugate heat transfer (CHT) code. The CFD software are commercial ones: ICEM for grid modelling and ANSYS Fluent for the numerical calculation, where symmetrical application prevails. The CFD CHT predictions were undertaken for Nimonic-75 metal walls with square (152.4 mm) arrays of 10 holes, whereby the lumped heat capacitance method was applied in order to determine the surface average heat transfer coefficient (HTC), h (W/m<sup>2</sup> K) and the dimensionless Nusselt number, Nu. The major parameters considered for the short hole geometries are the pitch to diameter, X/D and length to diameter, L/D ratios and both were varied with range of D values, but X of 15.24 mm and L of 6.35 mm kept constant. Also applied, are variable mass flux, G (kg/s∙m<sup>2</sup>) and were used in predicting the flow aerodynamics in the short holes. The predictions were for classic thermal entry length into a round hole, as vena contracta, flow separation and reattachment dominates the holes, hence the development of thermal profile through the depth of the GT hot walls. Additionally, the acceleration of the flow along the wall surfaces as it approaches the holes, was a significant part of the overall heat transfer. This was shown to be independent of the hole length, even though the L/D parameter is a critical component to enhanced heat transfer. The CFD CHT predictions showed that validation of the HTC h, Nu and pressure loss, ∆P are in better agreement with measured data and within reasonable acceptance. The ∆P agreement signifies that the aerodynamics were predicted correctly, which is also the reason why the HTC expressed per wall hole approach surface area and Nu were better predicted. This illustrates how effective and efficient the wall internal heat transfer cooling is for gas turbine hot wall heat transfer using airflow jets cooling.展开更多
CHINA formally an-nounced that all 74 vol-umes of the Chinese En-cyclopedia were published by Oc-tober 1993 after 15 years of re-search.President Jiang Zeminand Premier Li Peng conveyedtheir congratulations on the com...CHINA formally an-nounced that all 74 vol-umes of the Chinese En-cyclopedia were published by Oc-tober 1993 after 15 years of re-search.President Jiang Zeminand Premier Li Peng conveyedtheir congratulations on the com-pletion of this major work andreceived all the editors In a pri-vate audience.President Jiangsaid,“The Chinese Encyclopedia in-cludes both the ancient and mod-ern,both Chinese and foreignscholarship.It embodies thegreat Chinese tradition”展开更多
In order to investigate the frequent occurrences of rock burst in gob-side entry during the mining process of the mining zone No. 7, the mechanical model of main roof of fully-mechanized caving mining before breaking ...In order to investigate the frequent occurrences of rock burst in gob-side entry during the mining process of the mining zone No. 7, the mechanical model of main roof of fully-mechanized caving mining before breaking was established by the Winkler foundation beam theory, and the stress evolution law of surrounding rock with different dip angles of the seam during the mining process was analyzed by using FLAC3 D. The results show that: with the dip angle changing from 45° to 0°, the solid-coal side of gobside entry begins to form an L-shaped stress concentration zone at a dip angle of 30°, and the stress concentration degree goes to higher and higher levels. However, the stress concentration degree of the coalpillar side goes to lower and lower levels; the influence range and peak stress of the abutment at the lateral strata of adjacent gob increase with dip angle decreasing and reach a maximum value at a dip angle of 0°, but the tailgate is not affected; the abutment pressure superposition of two adjacent gobs leads to stress concentration further enhancing in both sides of gob-side entry. With the influence of strong mining disturbance, rock burst is easily induced by dynamic and static combined load in the advanced segment of gob-side entry. To achieve stability control similar to that in the roadway, the key control strategy is to reinforce surrounding rock and unload both sides. Accordingly, the large-diameter drilling and high-pressure water injection combined unloading and reinforced support cooperative control technology was proposed and applied in field test. The results of Electromagnetic Emission(EME) and field observation showed that unloading and surrounding rock control effect was obvious.展开更多
The nozzle clogging behavior of Ti-bearing IF steel was studied by metallographic analysis,scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS),and X-ray diffraction(XRD).According to the exper...The nozzle clogging behavior of Ti-bearing IF steel was studied by metallographic analysis,scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS),and X-ray diffraction(XRD).According to the experimental results,nozzle clogging primarily appears three layers.There are a lot of large-sized iron particles in the inner layer and mainly slag phase in the middle and outer layers.The principal clog constituents of the inner layer are loose alumina cluster inclusions and granular shaped alumina inclusions,containing iron particles. The clog constituents of the middle layer are mainly dendrite alumina inclusions.The primary phases existing in nozzle clogging are FeO·TiO2 and FeO·Al2O3 besidesα-Al2O3 and a-Fe.The FeO·TiO2 phases among the deposits adhere the deposits together firmly enough to lead to the inferior castability of Ti-bearing ultra low carbon steel compared with that of Ti-free low carbon Al-killed steel.展开更多
基金China Academy of Launch Vehicle Technology(Grant No.CALT-2022-03)Science and Technology on Underwater Information and Control Laboratory(Grant No.2021-JCJQ-LB-030-05).
文摘In this study, a three dimensional(3D) numerical model of six-degrees-of-freedom(6DOF) is applied to simulate the water entries of twin spheres side-by-side at different lateral distances and time intervals.The turbulence structure is described using the shear-stress transport k-ω(SST k-ω) model, and the volume of fluid(VOF) method is used to track the complex air-liquid interface. The motion of spheres during water entry is simulated using an independent overset grid. The numerical model is verified by comparing the cavity evolution results from simulations and experiments. Numerical results reveal that the time interval between the twin water entries evidently affects cavity expansion and contraction behaviors in the radial direction. However, this influence is significantly weakened by increasing the lateral distance between the two spheres. In synchronous water entries, pressure is reduced on the midline of two cavities during surface closure, which is directly related to the cavity volume. The evolution of vortexes inside the two cavities is analyzed using a velocity vector field, which is affected by the lateral distance and time interval of water entries.
文摘This contribution describes development and application of a user-friendly finite element program,UT3PC, to address three important problems in underground coal mine design:(1) safety of main entries,(2) barrier pillar size needed for entry protection, and(3) safety of bleeder entries during the advance of an adjacent longwall panel.While the finite element method is by far the most popular engineering design tool of the digital age, widespread use by the mining community has been impeded by the relatively high cost of and the need for lengthy specialized training in numerical methods.Implementation of UT3PC overcomes these impediments in three easy steps.First, a material properties file is prepared for the considered site.Next, mesh generation is automatic through an interactive process.A third and last step is simply execution of the program.Examples using data from several western coal mines illustrate the ease of using the application for analysis of main entries, barrier pillars, and bleeder entry safety.
文摘Evaluation for blast resistances of rice entries of 20th to 23rd International Rice Blast Nursery (IRBN) was conducted at CNRRI during 1990-1993. The resistance to seedling blast (SB) was evaluated in a greenhouse at 3-4 leaf stage with artificial inoculation while resistance to leaf blast (LB) and neck blast (NB) were evaluated in the natural field as instructed by the International Network of Genetic Evaluation for Rice (INGER). Materials with high level of blast resistance and good agronomic traits were selected and
基金supported by Deutsche Forschungsgemeinschaft (DFG) (Grant No. ME 4473/2-1)the Centre Henri Lebesgue (CHL) (Grant No. ANR-11-LABX-0020-01)National Natural Science Foundation of China (Grants Nos. 11971063, 11731012, 12271062 and 12288201)。
文摘Let(g_(n))_(n≥1) be a sequence of independent and identically distributed positive random d×d matrices and consider the matrix product G_(n)=g_(n)…g_1.Under suitable conditions,we establish the Berry-Esseen bounds on the rate of convergence in the central limit theorem and Cramer-type moderate deviation expansions,for any matrix norm ‖G_(n)‖ of G_(n),its entries G_(n)^(i,j) and its spectral radius ρ(G_(n)).Extended versions of their joint law with the direction of the random walk G_(n)x are also established,where x is a starting point in the unit sphere of R~d.
基金National Institutes of Health(NIH)(grants R01 A/130092 and Al161085).
文摘The spike protein(S)of SARS-CoV-2 is responsible for viral attachment and entry,thus a major factor for host suscep-tibility,tissue tropism,virulence and pathogenicity.The S is divided with S1 and S2 region,and the S1 contains the receptor-binding domain(RBD),while the S2 contains the hydrophobic fusion domain for the entry into the host cell.Numerous host proteases have been implicated in the activation of SARS-CoV-2 S through various c leavage sites.In this article,we review host proteases including furin,trypsin,transmembrane protease serine 2(TMPRSS2)and cathepsins in the activation of SARS-CoV-2 S.Many betacoronaviruses including SARS-CoV-2 have polybasic residues at the S1/S2 site which is subjected to the cleavage by furin.The S1/S2 cleavage facilitates more assessable RBD to the receptor ACE2,and the binding triggers further conformational changes and exposure of the S2'site to proteases such as type Il transmembrane serine proteases(TTPRs)including TMPRSS2.In the presence of TMPRSS2 on the target cells,SARS-CoV-2 can utilize a direct entry route by fusion of the viral envelope to the cellular membrane.In the absence of TMPRSS2,SARS-CoV-2 enter target cells via endosomes where multiple cathepsins cleave the S for the successful entry.Additional host proteases involved in the cleavage of the S were discussed.This article also includes roles of 3C-like protease inhibitors which have inhibitory activity against cathepsin L in the entry of SARS-CoV-2,and discussed the dual roles of such inhibitors in virus replication.
文摘Chronic hepatitis B virus(HBV)infection affects over 295 million people globally and an estimated 1.6 million people in the United States.It is associated with significant morbidity and mortality due to cirrhosis,liver failure,and liver cancer.Antiviral therapy with oral nucleos(t)ide analogues is associated with high rates of virologic suppression,which in turn has been associated with a decreased risk of liver complications.However,current antiviral regimens are limited by concerns with adverse effects,adherence,resistance,long-term treatment,and ongoing risk for liver events.Novel investigational agents are currently in development and are targeted at achieving functional cure with sustained hepatitis B surface antigen(HBsAg)loss and suppression of HBV DNA.Herein we review key evidence from phases II and III trials defining the efficacy and safety profiles for key investigational agents for functional cure of chronic hepatitis B,including core/capsid inhibitors,entry inhibitors,RNA interference(siRNA/ASO),HBsAg inhibitors,Toll-like receptor agonists,checkpoint inhibitors,and therapeutic vaccines.
基金Tata Steel Netherlands,Posco,Hyundai Steel,Nucor Steel,RioTinto,Nippon Steel Corp.,JFE Steel,Voestalpine,RHi-Magnesita,Doosan Enerbility,Seah Besteel,Umicore,Vesuvius and Schott AG are gratefully acknowledged.
文摘The CALPHAD thermodynamic databases are very useful to analyze the complex chemical reactions happening in high temperature material process.The FactSage thermodynamic database can be used to calculate complex phase diagrams and equilibrium phases involving refractories in industrial process.In this study,the FactSage thermodynamic database relevant to ZrO_(2)-based refractories was reviewed and the application of the database to understanding the corrosion of continuous casting nozzle refractories in steelmaking was presented.
文摘The formation of axonal spheroid is a common feature following spinal cord injury.To further understand the source of Ca^(2+)that mediates axonal spheroid formation,we used our previously characterized ex vivo mouse spinal cord model that allows precise perturbation of extracellular Ca^(2+).We performed twophoton excitation imaging of spinal cords isolated from Thy1YFP+transgenic mice and applied the lipophilic dye,Nile red,to record dynamic changes in dorsal column axons and their myelin sheaths respectively.We selectively released Ca^(2+)from internal stores using the Ca^(2+)ionophore ionomycin in the presence or absence of external Ca^(2+).We reported that ionomycin dose-dependently induces pathological changes in myelin and pronounced axonal spheroid formation in the presence of normal 2 m M Ca^(2+)artificial cerebrospinal fluid.In contrast,removal of external Ca^(2+)significantly decreased ionomycin-induced myelin and axonal spheroid formation at 2 hours but not at 1 hour after treatment.Using mice that express a neuron-specific Ca^(2+)indicator in spinal cord axons,we confirmed that ionomycin induced significant increases in intra-axonal Ca^(2+),but not in the absence of external Ca^(2+).Periaxonal swelling and the resultant disruption in the axo-myelinic interface often precedes and is negatively correlated with axonal spheroid formation.Pretreatment with YM58483(500 n M),a well-established blocker of store-operated Ca^(2+)entry,significantly decreased myelin injury and axonal spheroid formation.Collectively,these data reveal that ionomycin-induced depletion of internal Ca^(2+)stores and subsequent external Ca^(2+)entry through store-operated Ca^(2+)entry contributes to pathological changes in myelin and axonal spheroid formation,providing new targets to protect central myelinated fibers.
基金sponsored by the National Natural Sci-ence Foundation of China(Grant Nos.12102262,U22136010 and 11632012).
文摘This paper presents a novel experiment to observe the whole water entry process of a free-falling sphere into a regular wave.A time-accurate synchronizing system modulates the moment elaborately to ensure the sphere impacting onto the water surface at the desirable wave phase.Four high-speed cameras focus locally to measure the high-precision size of the cavity evolution.Meanwhile,the aggregated field view of the camera array covers both the splash above the free surface and the entire cavity in the wave.The detailed methodologies are described and verified for the hardware set-up and the image post-processing.The theoretical maximum deviation is 1.7%on the space scale.The integral morphology of the cavity is captured precisely in the coordinate system during the sphere penetrates through the water at four representative wave phases and the still water.The result shows that the horizontal velocity of the fluid particle in the wave impels the cavity and changes the shape distinctly.Notably,the wave motion causes the cavity to pinch offearlier at the wave trough phase and later at the wave crest phase than in the still water.The wave motion influences the falling process of the sphere slightly in the present parameters.
文摘We propose an eye-shaped keyboard for high-speed text entry in virtual reality (VR), having the shape of dual eyes with characters arranged along the curved eyelids, which ensures low density and short spacing of the keys. The eye-shaped keyboard references the QWERTY key sequence, allowing the users to benefit from their experience using the QWERTY keyboard. The user interacts with an eye-shaped keyboard using rays controlled with both the hands. A character can be entered in one step by moving the rays from the inner eye regions to regions of the characters. A high-speed auto-complete system was designed for the eye-shaped keyboard. We conducted a pilot study to determine the optimal parameters, and a user study to compare our eye-shaped keyboard with the QWERTY and circular keyboards. For beginners, the eye-shaped keyboard performed significantly more efficiently and accurately with less task load and hand movement than the circular keyboard. Compared with the QWERTY keyboard, the eye-shaped keyboard is more accurate and significantly reduces hand translation while maintaining similar efficiency. Finally, to evaluate the potential of eye-shaped keyboards, we conducted another user study. In this study, the participants were asked to type continuously for three days using the proposed eye-shaped keyboard, with two sessions per day. In each session, participants were asked to type for 20min, and then their typing performance was tested. The eye-shaped keyboard was proven to be efficient and promising, with an average speed of 19.89 words per minute (WPM) and mean uncorrected error rate of 1.939%. The maximum speed reached 24.97 WPM after six sessions and continued to increase.
基金the financial support from the National Natural Science Foundation of China(Grant No.52174302,No.51932008 and No.52304347)the Central China Thousand Talents Project(204200510011).
文摘In view of the service failure and low continuous casting production efficiency due to the corrosion of refractories at the slag-line in submerged entry nozzles,a submerged entry nozzle for low-carbon aluminum killed steel continuous casting in one steel plant was sampled and taken as the research object to analyze the causes and the mechanism of refractory corrosion at the slag-line.The results show that the core issue of the corrosion and necking of the slag-line materials is that the slag-line material are eroded,dissolved,and reacted by the mold flux gradually.Therefore,it is important to suppress or avoid the contact and reaction between the mold flux and slag-line materials.
文摘Short hole investigations relevant to gas turbine (GT) hot walls cooling heat transfer techniques, were carried out using computational fluid dynamics (CFD) combined with conjugate heat transfer (CHT) code. The CFD software are commercial ones: ICEM for grid modelling and ANSYS Fluent for the numerical calculation, where symmetrical application prevails. The CFD CHT predictions were undertaken for Nimonic-75 metal walls with square (152.4 mm) arrays of 10 holes, whereby the lumped heat capacitance method was applied in order to determine the surface average heat transfer coefficient (HTC), h (W/m<sup>2</sup> K) and the dimensionless Nusselt number, Nu. The major parameters considered for the short hole geometries are the pitch to diameter, X/D and length to diameter, L/D ratios and both were varied with range of D values, but X of 15.24 mm and L of 6.35 mm kept constant. Also applied, are variable mass flux, G (kg/s∙m<sup>2</sup>) and were used in predicting the flow aerodynamics in the short holes. The predictions were for classic thermal entry length into a round hole, as vena contracta, flow separation and reattachment dominates the holes, hence the development of thermal profile through the depth of the GT hot walls. Additionally, the acceleration of the flow along the wall surfaces as it approaches the holes, was a significant part of the overall heat transfer. This was shown to be independent of the hole length, even though the L/D parameter is a critical component to enhanced heat transfer. The CFD CHT predictions showed that validation of the HTC h, Nu and pressure loss, ∆P are in better agreement with measured data and within reasonable acceptance. The ∆P agreement signifies that the aerodynamics were predicted correctly, which is also the reason why the HTC expressed per wall hole approach surface area and Nu were better predicted. This illustrates how effective and efficient the wall internal heat transfer cooling is for gas turbine hot wall heat transfer using airflow jets cooling.
文摘CHINA formally an-nounced that all 74 vol-umes of the Chinese En-cyclopedia were published by Oc-tober 1993 after 15 years of re-search.President Jiang Zeminand Premier Li Peng conveyedtheir congratulations on the com-pletion of this major work andreceived all the editors In a pri-vate audience.President Jiangsaid,“The Chinese Encyclopedia in-cludes both the ancient and mod-ern,both Chinese and foreignscholarship.It embodies thegreat Chinese tradition”
基金supported by the Key Project of National Natural Science Foundation of China (No.51634001)the National Natural Science Foundation of China (No.51404269 and 51674253)+1 种基金the State Key Research Development Program of China (No.2016YFC0801403)the Key Research Development Program of Jiangsu Province,China (No.BE2015040)
文摘In order to investigate the frequent occurrences of rock burst in gob-side entry during the mining process of the mining zone No. 7, the mechanical model of main roof of fully-mechanized caving mining before breaking was established by the Winkler foundation beam theory, and the stress evolution law of surrounding rock with different dip angles of the seam during the mining process was analyzed by using FLAC3 D. The results show that: with the dip angle changing from 45° to 0°, the solid-coal side of gobside entry begins to form an L-shaped stress concentration zone at a dip angle of 30°, and the stress concentration degree goes to higher and higher levels. However, the stress concentration degree of the coalpillar side goes to lower and lower levels; the influence range and peak stress of the abutment at the lateral strata of adjacent gob increase with dip angle decreasing and reach a maximum value at a dip angle of 0°, but the tailgate is not affected; the abutment pressure superposition of two adjacent gobs leads to stress concentration further enhancing in both sides of gob-side entry. With the influence of strong mining disturbance, rock burst is easily induced by dynamic and static combined load in the advanced segment of gob-side entry. To achieve stability control similar to that in the roadway, the key control strategy is to reinforce surrounding rock and unload both sides. Accordingly, the large-diameter drilling and high-pressure water injection combined unloading and reinforced support cooperative control technology was proposed and applied in field test. The results of Electromagnetic Emission(EME) and field observation showed that unloading and surrounding rock control effect was obvious.
基金supported by the National Key Technologies R&D Program of China(No.2006BAE03A06)
文摘The nozzle clogging behavior of Ti-bearing IF steel was studied by metallographic analysis,scanning electron microscopy(SEM), energy dispersive spectroscopy(EDS),and X-ray diffraction(XRD).According to the experimental results,nozzle clogging primarily appears three layers.There are a lot of large-sized iron particles in the inner layer and mainly slag phase in the middle and outer layers.The principal clog constituents of the inner layer are loose alumina cluster inclusions and granular shaped alumina inclusions,containing iron particles. The clog constituents of the middle layer are mainly dendrite alumina inclusions.The primary phases existing in nozzle clogging are FeO·TiO2 and FeO·Al2O3 besidesα-Al2O3 and a-Fe.The FeO·TiO2 phases among the deposits adhere the deposits together firmly enough to lead to the inferior castability of Ti-bearing ultra low carbon steel compared with that of Ti-free low carbon Al-killed steel.