STUDIES ON THE INTERACTION OF EPOXY POLYMERS WITH HOMOPOLYUREAS

INTRODUCTION Epoxy resins are reactive polymers which when cured with a variety of chemicals lead to a host of useful thermosets. Since the epoxide is a strained ring, it readily undergoes addition and homopolymerization. The homopolymerization is a process catalysed by acids, bases, Lewis acids, t-amines as well as by inorganic salts.

Experimental Study of Hygrothermal and Ultraviolet Aging on the Flexural Performance of Epoxy Polymer Mortar

This paper studies the effects of hygrothermal environment at different temperatures and ultraviolet(UV)radiation on the bending properties of epoxy polymer mortar(EPM).The microstructure changes of EPM during aging were studied by scanning electron microscopy,and the bending properties of EPM were predicted by the Arrhenius law.The results showed that the bending properties of EPM were greatly affected by the temperature in the hygrothermal aging,but not evidently affected by ultraviolet radiation in UV aging.The prediction of Arrhenius model shows that the EPM will steadily retain 92.8%,89.1%and 79.4%of the original flexural strength after long-term hygrothermal aging at 40∘C,60∘C and 80∘C,respectively.

Polymerization of Bisphenol A Epoxy Resin with Polyethylene glycol

The catalyst boron trifluoride etherate was used to catalyze the reaction of epoxy resin with polyethylene glycol (PEG), and the effect of the concentration of the catalyst on the reaction is studied. It is shown that there exist two competitive reactions : I, self polymerization of epoxy resin via chain growth and II, copolymerization of epoxy resin with PEG via step growth. At high concentration of the catalyst reaction I dominates and reaction II is negligible. On the contrary, at low concentration of the catalyst, reaction II dominates and block copolymers are formed In the intermediate case, the two reactions are comparable with the result that a gel structure is obtained.

Acrylate Copolymers as Impact Modifi er for Epoxy Resin

P（BA-GMA）（PBG）, having various molecular weights, was synthesized by in situ polymerization of butyl acrylate（BA） and glycidyl methacrylate（GMA）, and further used as a modifier to improve the comprehensive properties of the epoxy curing system. The copolymers were characterized by gel permeation chromatography（GPC）. The effects of various molecular weights of copolymers on the mechanical properties, thermal performance, and phase behavior of the curing system were carefully evaluated. The experimental results of differential scanning calorimetry（DSC） and dynamic mechanical analysis（DMA） showed that glass transition temperature decreased and the tan δ peak shifted to a lower temperature with decreasing molecular weight of copolymer. Mechanical properties analysis of curing films showed that the impact strength and fracture toughness increased significantly upon the addition of PBG, indicating good toughness of the modified epoxy resins. From scanning electron microscopy（SEM） studies of the fracture surfaces of ER/PBG systems, the fracture behavior of epoxy matrix was changed from brittleness to toughness.

Preparation of Poly(o-toluidine)/Nano ZrO2/Epoxy Composite Coating and Its Application for Corrosion Protection of Steel

The main objective was to study the anticorrosion performance of poly（o-toluidine）/nano ZrO2/epoxy composite coating.Poly（o-toluidine）/nano ZrO2 composite was prepared by in situ polymerization of o-toluidine monomer in the presence of nano ZrO2 particles.Fourier transformation infrared spectroscopy（FT-IR）,UV-visible spectroscopy（UV-vis）,X-ray diffraction（XRD）,Scanning electron microscopy（SEM）,and Thermogravimetric analysis（TGA） were used to characterize the composition and structure of the composite.Poly（o-toluidine）/nano ZrO2 composite was mixed with epoxy resin through a solution blending method and the three components poly（o-toluidine）/nano ZrO2/epoxy composite coating was coated onto the surface of steel sample by the brush coating method.The anticorrosion performance of poly（o-toluidine）/nano ZrO2/epoxy composite coating on steel sample was studied by polarization curve and electrochemical impendence spectroscopy in 3.5% Na Cl solution as corrosion environment and also compared with that of poly（o-toluidine）/epoxy composite coating and pure epoxy coating.It was observed that the composite coating containing poly（otoluidine）/nano ZrO2 composite has got higher corrosion protection ability than that of poly（o-toluidine）.The electrochemical measurement results demonstrated that poly（o-toluidine） fillers improve the electrochemical anticorrosion performance of epoxy coating and the addition of nano ZrO2 particles increases the tortuosity of the diffusion pathway of corrosive substances.

Constitutive model for epoxy shape memory polymer with regulable phase transition temperature

The epoxy shape memory polymer(SMP)with adjustable phase transition temperature is a kind of high-performance shape mem-ory polymer,which can change its phase transition temperature and improve its mechanical properties through the process of photo curing.An epoxy SMP constitutive model combining phase transition and viscoelasticity is established by discretizing the epoxy SMP into several glass phase units and rubbery phase units in this paper.The model includes the viscoelastic constitutive equa-tions of glass phase units and rubber phase units,the parameter expression during shape memory process,and material parameter equation during photocuring process.And the stress relaxation behavior of epoxy SMP at different temperatures and the change of material parameters during the photo-curing process are simu-lated numerically,and the simulation results perform consistency with the experimental data.The model can not only relate shape memory effect and phase transformation in physics but also better characterize the viscoelastic properties of SMP and predict the shape memory response of SMP.

A compact and high-power silicon-wafer solar strip-cells-array module integrated with an array concentrator

A compact, low-cost and high-output-power silicon-wafer solar strip-cells-array module （SCAM） wus experimentally demonstrated. The proposed SCAM consisted mainly of a silicon-wafer strip-cell sparse array and low-concentration- ratio array concentrator based on an epoxy resin polymer （ERP） cylindrical piano-convex lens. A polymer replication process based on a polydimethylsiloxane mold was used to fabricate the ERP lens array concentrator. The results show that 46.94% of the silicon-wafer cell was saved in the designed SCAM. Moreover, the output power of the SCAM with a low concentration ratio of 8 suns was improved by 8.6%, compared with a whole piece of a conventional silicon-wafer solar cell with the same area as the module. The proposed method encapsulating solar cells provides a means to reduce the usage of silicon cells in modules as well as improving the output power of modules.