Tetrahedral framework nucleic acids/hyaluronic acidmethacrylic anhydride hybrid hydrogel with antimicrobial and anti-inflammatory properties for infected wound healing

Bacterial resistance and excessive inflammation are common issues that hinder wound healing.Antimicrobial peptides(AMPs)offer a promising and versatile antibacterial option compared to traditional antibiotics,with additional anti-inflammatory properties.However,the applications of AMPs are limited by their antimicrobial effects and stability against bacterial degradation.TFNAs are regarded as a promising drug delivery platform that could enhance the antibacterial properties and stability of nanodrugs.Therefore,in this study,a composite hydrogel(HAMA/t-GL13K)was prepared via the photocross-linking method,in which tFNAs carry GL13K.The hydrogel was injectable,biocompatible,and could be instantly photocured.It exhibited broad-spectrum antibacterial and anti-inflammatory properties by inhibiting the expression of inflammatory factors and scavenging ROS.Thereby,the hydrogel inhibited bacterial infection,shortened the wound healing time of skin defects in infected skin full-thickness defect wound models and reduced scarring.The constructed HAMA/tFNA-AMPs hydrogels exhibit the potential for clinical use in treating microbial infections and promoting wound healing.

Effect of Hyperbranched Polyester on Modification of Epoxy Resins Cured with Anhydride

The synthesis and characterization of hyperbranched polyester （HBP） with different molecular weight are studied. The effect of HBP on the modification of epoxy resins cured with anhydride is mainly discussed. The characteristics of HBP and the morphologies of cured system are determined by nuclear magnetic resonance spectroscopy （NMR）, gel permeation chromatography （GPC） and scanning electron microscope （SEM）. The impact strength of cured system is detected and Fourier transform infrared （FTIR） measurements were used to pursue the curing process. The investigation shows that HBP can improve the toughness by forming copolymer networks between epoxy resins, HBP and anhydride. Moreover, when the molecular weight of HBP is 1342g/mol the toughening effect is the best, and the changes of toughness are small with the increase of molecular weight of HBP to 3500 g/mol.

Cure reaction and phase behavior of liquid crystalline epoxides-anhydride systems

A series of novel liquid crystalline epoxides with lateral substituents were cured with anhydrides and the cure kinetics was investigated by non-isothermal DSC technique. The results showed that the lengths of lateral substituents have great effect on the value of Ea. The curing reaction became less active, when the liquid crystalline epoxides have long lateral substituents and were controlled by diffusion at the late stage of cure. A nematic structure was observed by POM and XRD.

MECHANICAL RELAXATION AND INTERMOLECULAR INTERACTION IN EPOXY RESINS/POLY (ETHYLENE OXIDE) BLENDS CURED WITH PHTHALIC ANHYDRIDE

The miscibility of the blend,composed of a bisphenol A epoxy resins (Diglycidyl ether of bisphenol A) (DGEBA) and poly(ethylene oxide) (PEG) and crosslinked by phthalic anhydride (PA) was studied using dynamic mechanical method. Single glass transition temperatures intermediate between the two pure components were observed for all blend levels. The secondary relaxation mechanism should relate to not only diester linkage, but also hydroxyether structural unit in the system. Fourier transform infrared spectroscopy (FTIR) is applied to study the curing reaction and intermolecular specific interaction of the system. The results indicate the PEO participates the crosslinking reaction, accelerates the curing reaction and make the reaction more perfect. The shifts of the hydroxyl band and carbonyl band demonstrate the presence of the intermolecular interaction in the cured blend. Moreover, the molecular interaction between the side hydroxyl in the hydroxyether units and the ether bond in PEO macromolecules is stronger.

ULTRASONIC BEHAVIOR OF EPOXY RESINS/POLY (ETHYLENE OXIDE) BLENDS CURED WITH PHTHALIC ANHYDRIDE

By means of ultrasonic attenuation apparatus, the ultrasonic velocity and attenuation ofanhydride-cured epoxy resins (EP)/poly (ethylene oxide) (PEO) blends were measured on thebasis of pulse-echo method. It was found that the sonic velocity of the blends decreased as thetemperature increased, but attenuation coefficient increased and possessed a peak value. Largervelocity and smaller attenuation coefficient(α)can be obtained from perfect crosslinking networkstructures of pure DGEBA cured with phthalic anhydride(PA). As for cured DGEBA/PEO blendsystems,sonic velocity decreased as a function of PEO concentration,but attenuation coefficient(α) increased.

Innovative dispersion techniques of graphene nanoplatelets(GNPs)through mechanical stirring and ultrasonication:Impact on morphological,mechanical,and thermal properties of epoxy nanocomposites

Graphene nanoplatelets(GNPs)have attracted tremendous interest due to their unique properties and bonding capabilities.This study focuses on the effect of GNP dispersion on the mechanical,thermal,and morphological behavior of GNP/epoxy nanocomposites.This study aims to understand how the dispersion of GNPs affects the properties of epoxy nanocomposite and to identify the best dispersion approach for improving mechanical performance.A solvent mixing technique that includes mechanical stirring and ultrasonication was used for producing the nanocomposites.Fourier transform infrared spectroscopy was used to investigate the interaction between GNPs and the epoxy matrix.The measurements of density and moisture content were used to confirm that GNPs were successfully incorporated into the nanocomposite.The findings showed that GNPs are successfully dispersed in the epoxy matrix by combining mechanical stirring and ultrasonication in a single step,producing well-dispersed nanocomposites with improved mechanical properties.Particularly,the nanocomposites at a low GNP loading of 0.1 wt%,demonstrate superior mechanical strength,as shown by increased tensile properties,including improved Young's modulus(1.86 GPa),strength(57.31 MPa),and elongation at break(4.98).The nanocomposite with 0.25 wt%GNP loading performs better,according to the viscoelastic analysis and flexural properties(113.18 MPa).Except for the nanocomposite with a 0.5 wt%GNP loading,which has a higher thermal breakdown temperature,the thermal characteristics do not significantly alter.The effective dispersion of GNPs in the epoxy matrix and low agglomeration is confirmed by the morphological characterization.The findings help with filler selection and identifying the best dispersion approach,which improves mechanical performance.The effective integration of GNPs and their interaction with the epoxy matrix provides the doorway for additional investigation and the development of sophisticated nanocomposites.In fields like aerospace,automotive,and electronics where higher mechanical performance and functionality are required,GNPs'improved mechanical properties and successful dispersion present exciting potential.

Thermal and Mechanical Properties of Epoxy Resin Modified with N-(4-hydroxyphenyl)terahydrophthalic Anhydrideimide

A novel epoxy-imide resin based on diglycidyl ether of bisphenol-A and N-（4-hydroxyphenyl）terahydrophthalic anhydrideimide（HTAM） was synthesized. The structural characterization of the epoxy-imide resin was conducted by FT-IR spectra. 4,4＇-diaminodiphneylmethane（DDM） was used as a curing agent for the epoxy-imide resin. The thermal properties of the cured resin were evaluated with dynamic mechanical analyses（DMA） and thermogravimetric analysis（TGA）. The results showed that the cured resin exhibited a high glass transition temperature（Tg） of 186 ℃ when the molar amount of HTAM was 0.04 mol in the resin. The yields of the cured resin at 800 ℃ raised from 16.45% to 19.41%. The flexural properties were also measured, the flexural strength raised from 79.4 to 95.7 MPa, and the flexural modulus exhibited from 2.6 to 3.0 GPa.

Ni/Al_2O_3 catalysts derived from spinel NiAl_2O_4 for low-temperature hydrogenation of maleic anhydride to succinic anhydride

Ni/Al2O3 catalysts were derived from spinel NiAl2O4 with different Ni content ((2.5, 5 and 7.5) wt%). The catalysts were obtained by H-2 reduction and were investigated for the low-temperature hydrogenation of maleic anhydride (MA) to produce succinic anhydride (SA). The characterization results showed that Ni-0 active sites were mainly derived during the H2 reduction from spinel NiAl2O4 Among the catalysts studied, employing the optimum preparation and reaction conditions with Ni(5%)/Al2O3 yielded the highest catalytic performance. A near-100% conversion of MA and similar to 90% selectivity to SA were achieved at 120 degrees C and 0.5 MPa of H-2 with a weighted hourly space velocity (MA) of 2 h(-1). (C) 2017, Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

SYNTHESIS OF MESOPOROUS POLY(STYRENE-co-MALEIC ANHYDRIDE)/SILICA HYBRID MATERIALS VIA A NONSURFACTANT-TEMPLATED SOL-GEL PROCESS

Mesoporous poly(styrene-co-maleic anhydride)/silica hybrid materials have been prepared. The synthesis was achieved by the HCl-catalyzed sol-gel reactions of tetraethyl orthosilicate (TEOS) and styrene-maleic anhydride copolymer in the presence of 3-aminopropyl triethoxysilane (APTES) as a coupling agent and citric acid as a nonsurfactant template or pore-forming agent, followed by ethanol extraction. Characterization results from nitrogen sorption isotherms and powder X-ray diffraction indicate that polymer-modified mesoporous materials with large specific surface areas (e.g. 900 m(2)/g) and pore volumes (e.g. 0.6 cm(3)/g) could be prepared. As the citric acid concentration is increased, the specific surface areas, pore volumes and pore diameters of the hybrid materials increase.

Tetrahydrofuran Ring Opening with Acyl Chlorides or Anhydrides Catalyzed by Gallium Triiodides: A Novel and Facile Method for the Preparation of Iodo Esters

Tetrahydrofuran ring can be opened with acyl chlorides or anhydrides catalyzed by gallium triiodides to afford iodo esters under mild conditions in good yields.

Synthesis and Characterization of a Novel Biomaterial: Maleic Anhydride-modified Poly(dl-lactic acid)

A novel modified poly(dl-lactic acid) (PDLLA) was obtained by covalently grafting of maleic anhydride onto the backbone of PDLLA, attempting to improve PDLLA’s hydrophilicity and cell affinity and to provide reactive groups for further chemical modification. FTIR, 13C NMR and DSC were used to characterize the maleic anhydride-modified PDLLA.

Ni-loaded Catalyst Containing Activated Clay for Maleic Anhydride Hydrogenation to Succinic Anhydride

In this work, the hydrogenation of maleic anhydride to succinic anhydride in the presence of 5 m%Ni/clay catalysts was investigated. These catalysts were characterized by X-ray diffraction （XRD）, H2 temperature programmed reduction （TPR） and thermogravimetric analysis （TGA） techniques. The XRD and TPR studies showed that Ni was present as Ni2＋ on the support, which indicated that there were no elemental nickel （Ni^0） and Ni203 species in the unreduced samples. Increasing of calcination temperature to 650 ℃ leads to destruction of the support structure observed in TGA, while the catalyst sample calcined at 550 ℃ exhibits better performances than other samples. The ideal conversion of maleic anhydride （97.14%） and selectivity of succinic anhydride （99.55%） were realized at a reaction temperature of 180 ℃ and a weight hourly space velocity of 4 h^-1 under a reaction pressure of 1 MPa.

RING OPENING COPOLYMERIZATION OF SUCCINIC ANHYDRIDE-ETHYLENE OXIDE BY Al(Ⅲ) ORGANOMETALLIC CATALYSTS

Ring opening copolymerization of succinic anhydride (SA) with ethylene oxide (EO)was successfully carried out by using a series of aluminum-based catalyst in 1,4-dioxane at62±2℃. The results showed that in-situ AlR_3-H_2O (R=ethyl, iso-butyl) catalysts gavehigher molecular weight (M_w～10~4), while Al(OR)_3 catalysts gave the higher alternatingcopolymer structure with slightly lower molecular weight. The in-situ AlR_3-H_2O systemshave been evaluated in more detail for the reaction which showed the optimum H_2O/Almolar ratio to be 0.5. The copolymers with different composition (F_(SA)/F_(EO)= 36/64to 45/55 mol/mol) were synthesized by using different monomer feed ratio. The melt-ing point (T_m), glass transition temperature (T_g) and enthalpy of fusion (ΔH_f) of thesecopolymers are depended on the copolymer composition and in the range of 87～102℃,-12～-18℃, and 37～66J/g, respectively. The second heating scan of DSC also in-dicated that the higher alternating copolymer was more easily recrystallized. The onsetdecomposition temperature was more than 300℃ under nitrogen and influenced by thecopolymer composition.

Au/FeO_x-TiO_2 as an efficient catalyst for the selective hydrogenation of phthalic anhydride to phthalide

Au/FeOx-TiO2,prepared by deposition-precipitation method,is an efficient and stable catalyst for the liquid phase selective hydrogenation of phthalic anhydride to phthalide under mild reaction conditions.

Synthesis of a Poly(amide-imide)from 5,6-Diphenyl-1-chloroformyl3,4-benzenedicarboxylic Anhydride and Bis (4-aminophenyl)ether

A novel poly (amide-imide) was prepared from a novel monomer: 5,6-diphenyl-chloroformyl-3,4-benzenedicarboxylic anhydride and bis (4-aminophenyl) ether. The polymer was characterized by FTIR. (HNMR)-H-1. DSC and TGA.

Solid-Liquid Equilibria of Several Binary and Ternary Systems Containing Maleic Anhydride

Solid-liquid equilibria (SLE) of three binary systems and seventernary systems containing maleic an- hydride (MA) are measured byvisual method. The experimental data are compared with the calculatedones with modified universal quasichemical functional group activitycoefficient (UNIFAC) method in which the interaction parametersbetween groups come from two sources, dortmund data bank (DDB), ifthere's any, and correlations based on our former presentedexperimental SLE data of twenty binary systems.

CONTROLLED RADICAL COPOLYMERIZATION OF STYRENE AND MALEIC ANHYDRIDE UNDER GAMMA RADIATION IN THE PRESENCE OF BENZYL DITHIOBENZOATE

The copolymerization of styrene (St) with maleic anhydride (MAh) under gamma radiation at room temperature in the presence of benzyl dithiobenzoate (BDTB) was found to display 'living' nature evidenced by constant concentration of chain radicals during the copolymerization, linear evolution of molecular weights with conversion and narrow molecular weight distribution (M-w/M-n = 1.23-1.35). The compositional analysis and the sequence structural information of the copolymers obtained from DEPT (Distortionless Enhancement by Polarization Transfer) experiments demonstrate that the copolymers obtained also possess strictly alternating structure.

Selective Hydrogenation of Maleic Anhydride to Succinic Anhydride over Nickel Catalyst Supported on Carbon Microspheres

The colloidal carbon microspheres(CMS)were prepared by the hydrothermal method.The nickel catalysts supported on carbon microspheres(Ni/CMS)were further prepared and were characterized by the Fourier transform infrared spectroscopy(FTIR),the X-ray diffraction(XRD),the scanning electron microscopy(SEM),the transmission electron microscopy(TEM),and the N_(2)adsorption technique.The selective hydrogenation of maleic anhydride(MA)to succinic anhydride(SA)over the Ni/CMS catalysts was investigated.The results indicated that the Ni/CMS catalyst,which was prepared with glucose as carbon source and calcined at 500℃,exhibited the best performance.The hydrogen pressure,reaction temperature,and reaction time could significantly affect the conversion of maleic anhydride during the hydrogenation reaction.A 98.4%conversion of MA and an 100%selectivity to SA were achieved over the Ni/CMS catalyst in acetic anhydride solvent under mild conditions covering a temperature of 90℃,a H2 pressure of 1.0 MPa,and a reaction time of 3 h.

Safety evaluation of long-term vas occlusion with styrene maleic anhydride and its non-invasive reversal on accessory reproductive organs in langurs

Aim:To evaluate the safety of the long term vas occlusion with styrene maleic anhydride (SMA) and its non-invasive reversal at the level of accessory reproductive glands (ARGs) in langurs.Methods:The morphology of seminal vesicle and ventral prostate was evaluated by light as well as transmission electron microscopy.Serum clinical chemistry and urine albumin were evaluated in an autoanalyzer using reagent kits.Fructose,acid phosphatase and zinc in the seminal plasma were evaluated spectrophotometrically according to the WHO manual.Serum testosterone, prostate specific antigen and sperm antibodies were evaluated by enzyme-linked immunosorbent assays (ELISA) using reagent kits and hematology was estimated according to standard procedures.Results:The morphological features and secretory activity of the seminal vesicle and prostate were normal as evidenced by the presence of well- developed mitochondria,rough endoplasmic reticulum,Golgi bodies,secretory granules and normal nuclear charac- teristics throughout the course of investigation.Serum testosterone and prostate specific antigen remained unaltered and serum antisperm antibodies level presented negative titres.Urine albumin was nil.Total red blood corpuscles (RBC),white blood corpuscles (WBC),hemoglobin (Hb) and red cell indices,serum protein,glucose,cholesterol, creatinine,creatine kinase (CK),serum glutamate oxalate transaminase (SGOT),serum glutamate pyruvate transami- nase (SGPT),lactate dehydrogenase (LDH),bilirubin,urea,triglycerides and high-density lipoprotein (HDL) did not show appreciable changes following vas occlusion and after its non-invasive reversal.Although fructose,acid phos- phatase (ACP) and zinc in the seminal plasma showed a significant reduction following vas occlusion,it could not be related to the morphology of seminal vesicle and prostate.Conclusion:SMA vas occlusion and its non-invasive reversal do not damage the accessory reproductive organs.

Surface Modification of Waste Tire by Grafting with Styrene and Maleic Anhydride

Waste tire powder, as waste rubber WR was subjected to grafting with styrene (St) and maleic anhydride (MA). Hydrogen peroxide H2O2 was used to initiate the free radical copolymerization of St onto WR. A thermal initiation was used in case of grafting of MA onto WR. Effect of initiator and monomer concentrations together with the influence of reaction temperature and reaction time were investigated. The grafting was estimated by weight, and the grafted copolymers were characterized by FT/IR, DSC and SEM to prove the grafting. It has found that the grafting increases with increase monomer and initiator concentrations. The increase in the reaction temperature and time also causes increasing levels of the grafted St and MA.