To increase the limit of ethernet over coax （EoC） technology in the bidirectional reform of the hybrid fiber coaxial （HFC） network, an ethernet passive electronic network （EPEN） system based on Coax is proposed ...To increase the limit of ethernet over coax （EoC） technology in the bidirectional reform of the hybrid fiber coaxial （HFC） network, an ethernet passive electronic network （EPEN） system based on Coax is proposed and experimentally demonstrated in this paper. The proposed EPEN exploits the existing capabilities of the MAC layer in the ethernet passive optical network （EPON） for reduction of cost of the HFC network. As the MPCP （multi-point control protocol） is introduced in the EPEN, bandwidth control and higher efficiency can be achieved. The experimental results exhibit the throughput of system up to 100Mbps, which meet the requirements of HFC network. To improve the performance of EPEN, frequency division multiplexing （FDM） can be used for further increase of the throughput and more hardware processing modules in the future. can be implemented to enhance the capacity展开更多
The authors propose a new persistent transmission based real time Ethernet MAC protocol that provides a predictable upper bound for the delivery delay of real time frames. Moreover, it is compatible with the protocol ...The authors propose a new persistent transmission based real time Ethernet MAC protocol that provides a predictable upper bound for the delivery delay of real time frames. Moreover, it is compatible with the protocol used by the existing Ethernet controllers for conventional datagram traffic and thus standard Ethernet stations can be used in the system without any modification. The paper describes the protocol in detail and analyses the maximum delivery delay for real time traffic and the efficiency of the channel.展开更多
With the current development trend of Ethernet gradually towards the control network of plant-floor layer and devices layer, much management information on Intelligent Circuit Breaker Controller (ICBC) is becoming dis...With the current development trend of Ethernet gradually towards the control network of plant-floor layer and devices layer, much management information on Intelligent Circuit Breaker Controller (ICBC) is becoming distributed and networked. This paper describes a mixing structure of complex industrial field control network based on Ethernet frame, then mainly discusses three network management methods of ICBC, such as the interconnection method based on PCI, embedded gateway and em- bedded Web server. At the same time, it also gives the basic hardware framework of implementing interconnection, the type of main components, and the real-time operation system supporting the embedded TCP/IP protocols and Web server.展开更多
基金Supported by the National High Technology Research and Development Program of China(No.2007AA01Z229)
文摘To increase the limit of ethernet over coax （EoC） technology in the bidirectional reform of the hybrid fiber coaxial （HFC） network, an ethernet passive electronic network （EPEN） system based on Coax is proposed and experimentally demonstrated in this paper. The proposed EPEN exploits the existing capabilities of the MAC layer in the ethernet passive optical network （EPON） for reduction of cost of the HFC network. As the MPCP （multi-point control protocol） is introduced in the EPEN, bandwidth control and higher efficiency can be achieved. The experimental results exhibit the throughput of system up to 100Mbps, which meet the requirements of HFC network. To improve the performance of EPEN, frequency division multiplexing （FDM） can be used for further increase of the throughput and more hardware processing modules in the future. can be implemented to enhance the capacity
基金TheNationalNaturalScienceFoundationofChina (No .6 9984 0 0 3)
文摘The authors propose a new persistent transmission based real time Ethernet MAC protocol that provides a predictable upper bound for the delivery delay of real time frames. Moreover, it is compatible with the protocol used by the existing Ethernet controllers for conventional datagram traffic and thus standard Ethernet stations can be used in the system without any modification. The paper describes the protocol in detail and analyses the maximum delivery delay for real time traffic and the efficiency of the channel.
基金Project (No. F2005000077) supported by the Natural ScienceFoundation of Hebei Province, China
文摘With the current development trend of Ethernet gradually towards the control network of plant-floor layer and devices layer, much management information on Intelligent Circuit Breaker Controller (ICBC) is becoming distributed and networked. This paper describes a mixing structure of complex industrial field control network based on Ethernet frame, then mainly discusses three network management methods of ICBC, such as the interconnection method based on PCI, embedded gateway and em- bedded Web server. At the same time, it also gives the basic hardware framework of implementing interconnection, the type of main components, and the real-time operation system supporting the embedded TCP/IP protocols and Web server.
