Lithium Salt Combining Fluoroethylene Carbonate Initiates Methyl Methacrylate Polymerization Enabling Dendrite-Free Solid-State Lithium Metal Battery

This work demonstrates a novel polymerization-derived polymer electrolyte consisting of methyl methacrylate,lithium bis(trifluoromethanesulfonyl)imide and fluoroethylene carbonate.The polymerization of MMA was initiated by the amino compounds following an anionic catalytic mechanism.LiTFSI plays both roles including the initiator and Li ion source in the polymer electrolyte.Normally,lithium bis(trifluoromethanesulfonyl)imide has difficulty in initiating the polymerization reaction of methyl methacrylate monomer,a very high concentration of lithium bis(trifluoromethanesulfonyl)imide is needed for initiating the polymerization.However,the fluoroethylene carbonate additive can work as a supporter to facilitate the degree of dissociation of lithium bis(trifluoromethanesulfonyl)imide and increase its initiator capacity due to the high dielectric constant.The as-prepared poly-methyl methacrylate-based polymer electrolyte has a high ionic conductivity(1.19×10^(−3)S cm^(−1)),a wide electrochemical stability window(5 V vs Li^(+)/Li),and a high Li ion transference number(t_(Li^(+)))of 0.74 at room temperature(RT).Moreover,this polymerization-derived polymer electrolyte can effectively work as an artificial protective layer on Li metal anode,which enabled the Li symmetric cell to achieve a long-term cycling performance at 0.2 mAh cm^(−2)for 2800 h.The LiFePO_(4)battery with polymerization-derived polymer electrolyte-modified Li metal anode shows a capacity retention of 91.17%after 800 cycles at 0.5 C.This work provides a facile and accessible approach to manufacturing poly-methyl methacrylate-based polymerization-derived polymer electrolyte and shows great potential as an interphase in Li metal batteries.

Copolymerization of Ethylene with Dicyclopentadiene Using a Constrained Geometry Cyclopentadienyl-phenoxytitanium Catalyst

The copolymerization of ethylene with dieyclopentadiene （DCP） in the presence of a constrained geometry tetramethylcyclopentadi-enyl-phenoxytitanium catalyst [ 2,4-＇ Bu2-6-（ 2,3,4,5-Me4 -Cp ） -PhO ] TICl2, combined with AI（ iBu）3/Ph3C^＋ B（ CsF5 ）4^- cocatalyst system was studied. The copolymers that were formed were characterized by ＇ H and ,3 C NMR, differential scanning calorimetry （ DSC）, SEM, and X-ray diffraction （XRD） analyses. The re- suits of the analysis indicate that the copolymers of ethylene with dicyclopentadiene are amorphous and display two or more melting temperatures in their DSC diagrams. Moreover, the morphologies of the copolymers are quite different from that of polyethylenes.

2-AMINOMETHYLPYRIDINE NICKEL(Ⅱ) COMPLEXES—SYNTHESIS,MOLECULAR STRUCTURE AND CATALYSIS OF ETHYLENE POLYMERIZATION

A series of new nickel(Ⅱ)complexes with 2-aminomethylpyridine ligands,(2-PyCH_2NHAr)_2NiBr_2(Ar=2,6- dimethylphenyl 2a;2,6-diisopropylphenyl 2b,2,6-difluorophenyl 2c),have been synthesized and used as catalyst precursors for ethylene polymerization in the presence of methylaluminoxane(MAO).The catalysts containing ortho-alkyl-substituents afford high molecular weight branched polyethylenes as well as a certain amount of oligomers.Enhancing the steric bulk of the alkyl substituent of the catalyst resulted in...

RING OPENING COPOLYMERIZATION OF SUCCINIC ANHYDRIDE-ETHYLENE OXIDE BY Al(Ⅲ) ORGANOMETALLIC CATALYSTS

Ring opening copolymerization of succinic anhydride (SA) with ethylene oxide (EO)was successfully carried out by using a series of aluminum-based catalyst in 1,4-dioxane at62±2℃. The results showed that in-situ AlR_3-H_2O (R=ethyl, iso-butyl) catalysts gavehigher molecular weight (M_w～10~4), while Al(OR)_3 catalysts gave the higher alternatingcopolymer structure with slightly lower molecular weight. The in-situ AlR_3-H_2O systemshave been evaluated in more detail for the reaction which showed the optimum H_2O/Almolar ratio to be 0.5. The copolymers with different composition (F_(SA)/F_(EO)= 36/64to 45/55 mol/mol) were synthesized by using different monomer feed ratio. The melt-ing point (T_m), glass transition temperature (T_g) and enthalpy of fusion (ΔH_f) of thesecopolymers are depended on the copolymer composition and in the range of 87～102℃,-12～-18℃, and 37～66J/g, respectively. The second heating scan of DSC also in-dicated that the higher alternating copolymer was more easily recrystallized. The onsetdecomposition temperature was more than 300℃ under nitrogen and influenced by thecopolymer composition.

CATALYTIC COPOLYMERIZATION OF STYRENE AND ETHYLENE BY NEUTRAL NICKEL(Ⅱ) COMPLEXES IN EMULSION

Emulsion copolymerization of styrene and ethylene catalyzed by a series of neutral nickel(Ⅱ) complexes was carried out in an aqueous system to give high-molecular-weight copolymers.The copolymers and emulsions were characterized by an array of techniques including NMR,GPC,TEM,WAXD and DSC.The results indicate that the copolymers obtained are mostly block copolymers of polyethylene with random insertion of styrene units,and their M_W is in the range of 10~5-10~6.By enhancing the electron withdrawing of the s...

i-PP/EPR REACTOR ALLOY PREPARED THROUGH ETHYLENE/PROPYLENE SLURRY COPOLYMERIZATION CATALYZED BY METALLOCENE SUPPORTED iPP PARTICLES

i-PP/m-EPR reactor alloy were prepared through ethylene/propylene slurry copolymerization catalyzed by metallocene(rac-Et(Ind)_2ZrCl_2)supported on porous iPP particles.Polar monomer(dihydromyrcene alcohol)treated with triethyaluminum was added in the preparation of porous iPP particles to introduce hydroxyl groups and thus enhance the ability for chemically supporting the metallocene catalyst.The effects of MAO/Zr ratio and monomer composition in feed on the reaction activity and property of polymer were i...

Oligomerization and Polymerization of Ethylene Initiated by a Novel Ni(Ⅱ)-Based Acetyliminopyridine Complexes as Single-Site Catalysts

Novel Ni（II）-based acetyliminopyridine complexes 1b, 2b, 3b （1-3b）, which are synthesized from ligands 1a, 2a, 3a （1-3a） and [NiCl2（DME）], are suitable precursors for the catalysts that are necessary for ethylene oligomerization and polymerization reactions, activated by methylaluminoxane （MAO）. The MAO-treated 1-3b presents an active catalytic center, which may oligomerize and polymerize ethylene to produce linear α-olefins and polyethylene, respectively. The molecular weight distributions of oligomers that are obtained are in good agreement with the Schulz-Flory rules for oligomers〉C4. The activity of 3b-MAO complex is 6.3×10^7 g/（molNi.h） at 50 ℃. The activities and molecular weight distributions of oligomers show significant reliance on the structures of catalyst precursors.

RING-OPENING POLYMERIZATION OF TRIMETHYLENE CARBONATE CATALYZED BY NOVEL SINGLE COMPONENT RARE EARTH CALIXARENE COMPLEXES

In this paper,ring-opening polymerization of trimethylene carbonate(TMC)with rare earth(Nd,Y,La)ρ-tert- butylcalix[n]arene(n=4,6,and 8)complexes as catalysts has been studied.Poly(trimethylene carbonate)(PTMC)with M_v of 21,400 was produced by bulk polymerization under the conditions as follows:[TMC]_0/[Nd](molar ratio)=1000,80℃, 8 h.Mechanism study reveals that the polymerization proceeds via a coordination mechanism.

Recycling and depolymerization of waste polyethylene terephthalate bottles by alcohol alkali hydrolysis

In this work,a novel alcohol alkali hydrolysis method was explored for the preparation of terephthalic acid(TPA)from waste polyethylene terephthalate(PET).First,a series of single factor experiments on the depolymerization rate of waste PET bottles and the yield of TPA were conducted to determine the optimized experimental conditions,in terms of reaction time,reaction temperature,dosage of ethylene glycol and sodium bicarbonate,amount of distilled water and stirring rate.Then IR spectra and elemental analysis were carried out for the characterization of obtained product.Under optimal experimental conditions,over 98%PET can be depolymerized into the target product(TPA)and the purity and yield of TPA are over 97%and 94%,respectively.Both the experimental and analytical results support a feasible process for the preparation of TPA from waste PET.It is expected that this alcohol alkali hydrolysis method can promise an effective way for the sustainable recycling of waste PET.

Strong influences of polymerization temperature on ethylene/1-hexene copolymerization catalyzed by (2-PhInd)_2ZrCl_2/methyl aluminoxane

Ethylene/1-hexene was copolymerized by an unbridged zirconocene, (2-PhInd)2ZrCl2/MAO (methyl aluminoxane) at 0 °C and 50 °C respectively. High copolymerization activity and 1-hexene incorporation were observed at 0 °C, with the co- polymer formed having random sequence distribution and narrow molecular weight distribution. Ethylene polymerization at 50 °C showed high activity, but copolymerization at 50 °C showed much lower activity, which decreased sharply with increasing 1-hexene concentration in the monomer feed. Copolymer formed at 50 °C showed blocky sequence distribution and broad mo- lecular weight distribution. A mechanism model based on ligand rotation hindered by the propagation chain has been proposed to qualitatively explain the observed phenomena.

Novel sandwich structured glass fiber Cloth/Poly(ethylene oxide)-MXene composite electrolyte

Recently,poly(ethylene oxide)(PEO)-based solid polymer electrolytes have been attracting great attention,and efforts are currently underway to develop PEO-based composite electrolytes for next generation high performance all-solid-state lithium metal batteries.In this article,a novel sandwich structured solid-state PEO composite electrolyte is developed for high performance all-solid-state lithium metal batteries.The PEO-based composite electrolyte is fabricated by hot-pressing PEO,LiTFSI and Ti_(3)C_(2)T_(x) MXene nanosheets into glass fiber cloth(GFC).The as-prepared GFC@PEO-MXene electrolyte shows high mechanical properties,good electrochemical stability,and high lithium-ion migration number,which indicates an obvious synergistic effect from the microscale GFC and the nanoscale MXene.Such as,the GFC@PEO-1 wt%MXene electrolyte shows a high tensile strength of 43.43 MPa and an impressive Young's modulus of 496 MPa,which are increased by 1205%and 6048%over those of PEO.Meanwhile,the ionic conductivity of GFC@PEO-1 wt%MXene at 60℃ reaches 5.01×10^(-2) S m^(-1),which is increased by around 200%compared with that of GFC@PEO electrolyte.In addition,the Li/Li symmetric battery based on GFC@PEO-1 wt%MXene electrolyte shows an excellent cycling stability over 800 h(0.3 mA cm^(-2),0.3 mAh cm^(-2)),which is obviously longer than that based on PEO and GFC@PEO electrolytes due to the better compatibility of GFC@PEO-1 wt%MXene electrolyte with Li anode.Furthermore,the solid-state Li/LiFePO_(4) battery with GFC@PEO-1 wt%MXene as electrolyte demonstrates a high capacity of 110.2–166.1 mAh g^(-1) in a wide temperature range of 25–60C,and an excellent capacity retention rate.The developed sandwich structured GFC@PEO-1 wt%MXene electrolyte with the excellent overall performance is promising for next generation high performance all-solid-state lithium metal batteries.

Reaction pathways and selectivity in the chemo-catalytic conversion of cellulose and its derivatives to ethylene glycol:A review

Biomass-to-ethylene glycol is an effective means to achieve high-value utilisation of cellulose but is hindered by low conversion efficiency and poor catalyst activity and stability.Glucose and cellobiose are derivatives of cellulose conversion to ethylene glycol,and it is found that studying the reaction process of both can help to understand the reaction mechanism of cellulose.It is desirable to develop a reusable,highly active catalyst to convert cellulose into ethylene glycol.This ideal catalyst might have one or more active sites described the conversion steps above.Here,we discuss the catalyst development of celluloseto-ethylene glycol,including tungsten,tin,lanthanide,and other transition metal catalysts,and special attention is given to the reaction mechanism and kinetics for preparing ethylene glycol from cellulose,and the economic advantages of biomass-to-ethylene glycol are briefly introduced.The insights given in this review will facilitate further development of efficient catalysts,for addressing the global energy crisis and climate change related to the use of fossil fuels.

COPOLYMERIZATION OF ETHYLENE AND PROPYLENE WITH (CpCH_2CH_2CH=CH_2)_2MCl_2(M=Zr,Hf)AND Cp_2ZrCl_2 CATALYSTS

(CpCH_2CH_2CH = CH_2)_2MCl_2(M=Zr, Hf)/MAO and Cp_2ZrCl_2/MAO (Cp=cyclopentadienyl; MAO=methylaluminoxane) catalyst systems have been compared for ethylene copolymerization to investigate the influence of theligand and transition metal on the polymerization activity and copolymer properties. For both CH_2CH_2CH=CH_2 substitutedcatalysts the catalytic activity decreased with increasing propene concentration in the feed. The activity of the hafnocenecatalyst was 6～8 times lower than that of the analogous zirconocene catalyst, ^(13)C NMR analysis showed that the copolymerobtained using the unsubstituted catalyst Cp_2ZrCl_2 has greater incorporatien of propene than those produced byCH_2CH_2CH=CH_2 substituted Zr and Hf catalysts. The melting point, crystallinity and the viscosity-average molecularweight of the copolymer decreased with an increase of propenc concentration in the feed. Both CH_2CH_2CH= CH_2 substitutedZr and Hf catalysts exhibit little or no difference in the melting point and crystallinity of the produced copolymers. However,there are significant differences between the two zirconocene catalysts. The copolymer produced by Cp_2ZrCl_2 catalyst havemuch lower T_m and X_c than those obtained with the (CpCH_2CH_2CH=CH_2)_2ZrCl_2 catalyst. The density and molecular weightof the copolymer decreased in the order: (CpCH_2CH_2CH=CH_2)_2HfCl_2>(CpCH_2CH_2CH=CH_2)_2ZrCl_2>Cp_2ZrCl_2. The kineticbehavior of copolymerizaton with Hf catalyst was found to be different from that with Zr catalyst.

Sn nucleation and growth from Sn(II)dissolved in ethylene glycol:Electrochemical behavior and temperature effect

Thermodynamic and kinetic aspects of Sn nucleation and growth processes onto a glassy carbon electrode from SnCl2·2H2O dissolved in ethylene glycol solutions were studied.Typical reduction and oxidation peaks observed in voltammograms have demonstrated the capability of ethylene glycol solutions to electrodeposit Sn.The temperature-dependence of diffusion coefficient values derived from potentiodynamic and potentiostatic studies helped to determine and validate estimations of the activation energy for Sn(II)bulk diffusion.Chronoamperometric results have identified that,the suitable model to describe the early stage of Sn electrodeposition could be composed of Sn three-dimensional nucleation and diffusion-controlled growth and water reduction contributions,which was duly validated by theoretical and experimental approaches.From the model,typical kinetic parameters such as the nucleation frequency of Sn(A),number density of Sn nuclei(N_(0)),and diffusion coefficient of Sn(II)ions(D),were determined.The presence of Sn nuclei with excellent quality and their structures were verified using SEM,EDX,and XRD techniques.

B-COPNA resin formation from ethylene tar light fractions:Process development and mechanical exploration by molecular simulation

An efficient utilization strategy of ethylene tar(ET),the main by-product of the ethylene cracking unit,is urgently required to meet demands for modern petrochemical industry.On the other hand,condensed polynuclear aromatic resin of moderate condensation degree(B-COPNA)is a widely used carbon material due to its superb processability,the production of which is,however,seriously limited by the high cost of raw materials.Under such context,an interesting strategy was proposed in this study for producing B-COPNA resin using crosslinked light fractions of ethylene tar(ETLF,boiling point<260℃)facilitated by molecular simulation.1,4-Benzenedimethanol(PXG)was first selected as the crosslinking agent according to the findings of molecular simulation.The effects of operating conditions,including reactions temperature,crosslinking agent,and catalyst content on the softening point and yield of B-COPNA resin products were then investigated to optimize the process.The reaction mechanism of resin production was studied by analyzing the molecular structure and transition state of ETLF and crosslinking agents.It was shown that PXG exhibited a superior capacity of withdrawing electrons and a higher electrophilic reactivity than other crosslinking agents.In addition to the highest yield and greatest heat properties,PXG-prepared resin contained the most condensed aromatics.The corresponding optimized conditions of resin preparation were 180℃,1:1.9(PXG:ETLF),and 3%(mass)of catalyst content with a resin yield of 78.57%.It was the electrophilic substitution reaction that occurred between the ETLF and crosslinking agent molecules that were responsible for the resin formation,according to the experimental characterization and molecular simulation.Hence,it was confirmed that the proposed strategy and demonstrated process can achieve a clean and high value-added utilization of ETLF via B-COPNA resin preparation,bringing huge economic value to the current petrochemical industry.

RING-OPENING COPOLYMERIZATION OF DL-LACTIDE AND POLY(ETHYLENE GLYCOL) INITIATED BY LANTHANUM ACETATE AND APPLICATION OF THE COPOLYMER AS MATRIX OF MICROSPHERES CONTAINING VIBRIO CHOLERA ANTIGENS

Poly-dl-lactide-poly(ethylene glycol) (PELA) triblock copolymers were synthesized with lanthanum acetate as the initiator. PELA microspheres with entrapped Vibrio Cholera antigen and outer membrane protein (OMP) were prepared by a double emulsion W/O/W based on solvent extraction methods. The obtained microspheres showed smooth and spherical surface and their size varied between 0.5 and 5.0 mu m, which are suitable for oral targeting delivery system. The distribution tests in rabbits and mice through scanning electronic micrography and fluorescence microscope indicated that microspheres have successfully reached the immunization-related tissues, such as the liver, spleen and intestinal peyer's patches, following oral administration. The PELA microspheres were also evaluated as an efficient antigen delivery system by enhancing a higher protective ratio against live Vibrios Cholera.

Mn-doped SrCoO_(3-δ) Perovskite Oxides for Ethylene Production via Chemical Looping Oxidative Dehydrogenation of Ethane

Chemical looping oxidative dehydrogenation (CL-ODH) is an economically promising method for convertingethane into higher value-added ethylene utilizing lattice oxygen in redox catalysts, also known as oxygen carriers. Inthis study, perovskite-type oxide SrCoO_(3-δ) and B-site Mn ion-doped oxygen carriers (SrCo_(1-x)MnxO_(3-δ), x=0.1, 0.2, 0.3)were prepared and tested for the CL-ODH of ethane. The oxygen-deficient perovskite SrCoO_(3-δ) exhibited high ethyleneselectivity of up to 96.7% due to its unique oxygen vacancies and lattice oxygen migration rates. However, its low ethyleneyield limits its application in the CL-ODH of ethane. Mn doping promoted the reducibility of SrCoO_(3-δ) oxygen carriers,thereby improving ethane conversion and ethylene yield, as demonstrated by characterization and evaluation experiments.X-ray diffraction results confirmed the doping of Mn into the lattice of SrCoO_(3-δ), while X-ray photoelectron spectroscopy(XPS) indicated an increase in lattice oxygen ratio upon incorporation of Mn into the SrCoO_(3-δ) lattice. Additionally, H2temperature-programmed reduction (H2-TPR) tests revealed more peaks at lower temperature reduction zones and a declinein peak positions at higher temperatures. Among the four tested oxygen carriers, SrCo0.8Mn0.2O_(3-δ) exhibited satisfactoryperformance with an ethylene yield of 50% at 710 °C and good stability over 20 redox cycles. The synergistic effect of Mnplays a key role in increasing ethylene yields of SrCoO_(3-δ) oxygen carriers. Accordingly, SrCo0.8Mn0.2O_(3-δ) shows promisingpotential for the efficient production of ethylene from ethane via CL-ODH.

Synthesis, Structure and Norbornene Polymerization Catalyzed by Palladium Complex Bearing the 1,3-Diphenyl-2-((quinolin-8-ylamino)-methylene)-propane-1,3-dione Ligand

The title complex 1,3-diphenyl-2-（（quinolin-8-ylamino）methylene）propane-l,3- dione-palladium was synthesized by the reaction of 1,3-diphenyl-2-（（quinolin-8-ylamino）-methylene）propane-1,3-dione with PdCl2, and characterized by IR spectrum and single-crystal X-ray diffraction analysis. The crystal belongs to the orthorhombic system, space group P21212 with a = 21.838（4）, b = 8.3952（17）, c = 11.497（2） A, V= 2107.9（7） A3, C25H17C1N2O2Pd, Mr = 519.26, Z= 4, Dc= 1.636 g/cm3, H = 1.032 mm-1, F （000） = 1040, the final R = 0.0307 and wR = 0.0778. This compound was investigated for the catalytic behavior towards norbornene （NB） vinyl addition polymerization. And the complex exhibits excellent catalytic activities up to 2.18×10^8g of PNB （tool of Pd）-1 h-1 with high monomer conversion using methylaluminoxane （MAO） as the cocatalyst.

Boosting kinetic separation of ethylene and ethane on microporous materials via crystal size control

The adsorptive separation of C_(2)H_(4)and C_(2)H_(6),as an alternative to distillation units consuming high energy,is a promising yet challenging research.The great similarity in the molecular size of C_(2)H_(4)and C_(2)H_(6)brings challenges to the regulation of adsorbents to realize efficient dynamic separation.Herein,we reported the enhancement of the kinetic separation of C_(2)H_(4)/C_(2)H_(6)by controlling the crystal size of ZnAtzPO_(4)(Atz=3-amino-1,2,4-triazole)to amplify the diffusion difference of C_(2)H_(4)and C_(2)H_(6).Through adjusting the synthesis temperature,reactant concentration,and ligands/metal ions molar ratio,ZnAtzPO4 crystals with different sizes were obtained.Both single-component kinetic adsorption tests and binary-component dynamic breakthrough experiments confirmed the enhancement of the dynamic separation of C_(2)H_(4)/C_(2)H_(6)with the increase in the crystal size of ZnAtzPO_(4).The separation selectivity of C_(2)H_(4)/C_(2)H_(6)increased from 1.3 to 98.5 with the increase in the crystal size of ZnAtzPO_(4).This work demonstrated the role of morphology and size control of adsorbent crystals in the improvement of the C_(2)H_(4)/C_(2)H_(6)kinetic separation performance.

Preparation of microsized crosslinked microspheres by dispersion copolymerization of polystyrene/polyethylene glycol 200-dimethacrylae

Dispersion copolymerization of styrene with polyethylene glycol 200-dimethacrylae as the cross-linking agent was completed by using poly（N-vinyl pyrrolidone） and 2,2-azo-bisisobutyronitrile as the steric stabilizer and initiator, respectively. Crosslinked copolymeric microspheres were prepared directly by the one-step method of dispersion copolymerization. The effects of the content of polyethylene glycol 200-dimethacrylae on the particle morphology and the copolymerization rate were investigated. It shows that the crosslinking agent plays an important role in the particle morphology and the system stability. When the content of crosslinking reached 2.5wt%, the floriated particles were obtained.