Sepiolite （S9, B10, B20, B40） and boehmite have been added to an intumecent flame retardant （IFR） system to produce the halogen-free and fire-resistant ethylene-vinyl acetate copolymer （EVM） rubber. The rubber c...Sepiolite （S9, B10, B20, B40） and boehmite have been added to an intumecent flame retardant （IFR） system to produce the halogen-free and fire-resistant ethylene-vinyl acetate copolymer （EVM） rubber. The rubber contains ammonium polyphosphate （APP） as acid source, double pentaerythritol （D-PER） as carbon source and melamine （MN） as gas source. The effects of nano-filler sepiolite and boehmite on the fire-resistant property of EVM rubber based on IFR system were investigated. The test results show that the system with nano-filler of sepiolite B10 has the best fire-resistant property. The process of smoke emission and thermal decomposition, the element composition of char surface and the micro morphology of intumecent char layer of the EVM IFR system with nano-filler were also studied by NBS chamber, thermogravimetric （TG） analysis, X- ray photoelectron spectroscopy （XPS） and scanning electron microscope （SEM）.展开更多
The effect of the different geometrical dimensionality of two dimensional graphene nanosheets （2D GNSs） and one dimensional carbon nanotubes （1D CNTs） on the non-isothermal crystallization of an ethylene-vinyl ace...The effect of the different geometrical dimensionality of two dimensional graphene nanosheets （2D GNSs） and one dimensional carbon nanotubes （1D CNTs） on the non-isothermal crystallization of an ethylene-vinyl acetate （EVA） copolymer at high loading （5 wt%） was studied. Transmission electron microscopy indicated a homogeneous dispersion of GNSs and CNTs in EVA obtained by a solution dispersion process. Fourier-transform infrared spectroscopy and differential scanning calorimetry measurements showed that 1D CNTs and 2D GNSs acted as effective nucleating agents, with a noticeably increased onset crystallization temperature of EVA. A high weight fraction of nano-fillers slowed the overall crystallization rate of composites. At the same crystallization temperatute, the crystallization behavior of GNS/EVA composites was slowed compared to that of the CNT/EVA ones owing to larger nucleus barrier and activation energy of diffusion. Dynamic mechanical relaxation and rheology behavior of CNT/EVA and GNS/EVA composites demonstrated that the planar structure of the GNSs had an intensively negative effect on EVA chain mobility due to interactions between nano- fillers and polymer chains, as well as spatial restriction.展开更多
The goal is to develop a hybrid IPN network of polyvinyl acetate (PVAc) and ethylene-vinyl acetate (VAE). In this research work, the vinyl acetate (VAc)/ VAE hybrid emulsion and polyvinyl acetate emulsion (PVAc) were ...The goal is to develop a hybrid IPN network of polyvinyl acetate (PVAc) and ethylene-vinyl acetate (VAE). In this research work, the vinyl acetate (VAc)/ VAE hybrid emulsion and polyvinyl acetate emulsion (PVAc) were effectively synthesized. Emulsions with various characteristics have been developed by adjusting the weight ratios between the vinyl acetate monomer and the VAE component. The impacts on the mechanical, thermal, and physical properties of the films were investigated using tests for pencil hardness, tensile shear strength, pH, contact angle measurement, differential scanning calorimetry (DSC), and viscosity. When 5.0 weight percent VAE was added, the tensile shear strength in dry conditions decreased by 18.75% after a 24-hour bonding period, the heat resistance decreased by 26.29% (as per WATT 91) and the tensile shear strength decreased by approximately 36.52% in wet conditions (per EN 204). The pristine sample’s results were also confirmed by the contact angle test. The interpenetrating network (IPN) formation in hybrid PVAc emulsion as primary bonds does not directly attach to PVAc and VAE chains. The addition of VAE reduced the mechanical properties (at dry conditions) and heat resistance as per WATT 91. Contact angle analysis demonstrated that PVAc adhesives containing VAE had increased water resistance when compared to conventional PVA stabilised PVAc homopolymer-based adhesives. When compared to virgin PVAc Homo, the water resistance of the PVAc emulsion polymerization was enhanced by the addition of VAE.展开更多
The discarded feathers / ethylene vinyl acetate copolymer( EVA) thermoplastic composite materials was obtained with discarded feathers as reinforced material and EVA powders as matrix material by hot pressing method. ...The discarded feathers / ethylene vinyl acetate copolymer( EVA) thermoplastic composite materials was obtained with discarded feathers as reinforced material and EVA powders as matrix material by hot pressing method. Sound absorption properties were studied by changing mass ratio of discarded feathers and EVA,thickness of composite materials,hot pressing pressure and hot pressing temperature. It was found that the sound absorption properties of composite materials were good when the mass ratio of discarded feathers and EVA was 1: 1,thickness of composite materials was 30 mm,hot pressing pressure was 8 MPa,and hot pressing temperature was 80 ℃. Under the optimum conditions,the effect of composite density on sound absorption property was analyzed. In a certain range,the sound absorption property was enhanced with the decrease of the composite density.When the composite density was 0. 1g /cm^3, the maximum absorption coefficient was 0.96. Finally,the capillary theory was used to calculate the maximum sound absorption coefficient of discarded feathers / EVA thermoplastic composite materials. The good agreements of experimental results and calculated results proved the validity of the theoretical models.展开更多
The copolymer of vinyl acetic ester and acrylonitrile is used to react with [Rh（CO）<sub>2</sub>Cl]<sub>2</sub>to form a complex which can be used in the carbonylation of methyl acetate to ace...The copolymer of vinyl acetic ester and acrylonitrile is used to react with [Rh（CO）<sub>2</sub>Cl]<sub>2</sub>to form a complex which can be used in the carbonylation of methyl acetate to acetic anhydride. Many factors affecting the reaction rate, catalytic activity and selectivity have been investigated. The reaction rate depends on rhodium complex and methyl iodide, and is differant from that of homogenous small molecular rhodium complex catalyst. It is revealed thatthe reaction rate is zero order in CO, first order in Rh and LiOAc, but the order in CH<sub>3</sub>I is complicated. The causes of these phenomena are discussed based on the mechanism of carbonylation of methyl acetate.展开更多
A series of porous microspheres of linear and ethylene diacrylate (M') cross-linked copolymers of 2-vinylpyridine (V) and methyl acrylate (M) reacted with tetracarbonyldichlorodirhodium to form a series of cis-dic...A series of porous microspheres of linear and ethylene diacrylate (M') cross-linked copolymers of 2-vinylpyridine (V) and methyl acrylate (M) reacted with tetracarbonyldichlorodirhodium to form a series of cis-dicarbonylrhodium chelate complex (MVRh and MVM 'Rh). They are thermally stable yet very reactive in the carbonylation of methanol to acetic acid, and of methanol-acetic acid mixture to acetic acid and acetic anhydride with a selectivity of 100% under relatively mild and anhydrous conditions.展开更多
Poly(methyl acrylate)-b-poly(5,6-benzo-2-methylene-1,3-dioxepane) (PMA-b-PBMDO) was synthesized by two-step atom transfer radical polymerization (ATRP). Firstly, ATRP of methyl acrylate (MA) was realized using ethyl a...Poly(methyl acrylate)-b-poly(5,6-benzo-2-methylene-1,3-dioxepane) (PMA-b-PBMDO) was synthesized by two-step atom transfer radical polymerization (ATRP). Firstly, ATRP of methyl acrylate (MA) was realized using ethyl alpha-bromobutyrate (EBrB) as initiator in the presence of CuBr/2,2'-bipyridine. After isolation, poly(methyl acrylate) with terminal bromine (PMA-Br) was synthesized. Secondly, the resulting PMA-Br was used as a macromolecular initiator in the ATRP of BMDO. The structure of block copolymer was characterized by H-1-NMR spectroscopy. Molecular weight and molecular weight distribution were determined on a gel permeation chromatograph (GPC).展开更多
基金Sponsored by Project in National Key Technology R&D Program(2006BAE03B05-2)
文摘Sepiolite （S9, B10, B20, B40） and boehmite have been added to an intumecent flame retardant （IFR） system to produce the halogen-free and fire-resistant ethylene-vinyl acetate copolymer （EVM） rubber. The rubber contains ammonium polyphosphate （APP） as acid source, double pentaerythritol （D-PER） as carbon source and melamine （MN） as gas source. The effects of nano-filler sepiolite and boehmite on the fire-resistant property of EVM rubber based on IFR system were investigated. The test results show that the system with nano-filler of sepiolite B10 has the best fire-resistant property. The process of smoke emission and thermal decomposition, the element composition of char surface and the micro morphology of intumecent char layer of the EVM IFR system with nano-filler were also studied by NBS chamber, thermogravimetric （TG） analysis, X- ray photoelectron spectroscopy （XPS） and scanning electron microscope （SEM）.
基金supported by the National Science Fund for Distinguished Young Scholars(No.50925311)the National Natural Science Foundation of China(Nos.20976112,51033004)
文摘The effect of the different geometrical dimensionality of two dimensional graphene nanosheets （2D GNSs） and one dimensional carbon nanotubes （1D CNTs） on the non-isothermal crystallization of an ethylene-vinyl acetate （EVA） copolymer at high loading （5 wt%） was studied. Transmission electron microscopy indicated a homogeneous dispersion of GNSs and CNTs in EVA obtained by a solution dispersion process. Fourier-transform infrared spectroscopy and differential scanning calorimetry measurements showed that 1D CNTs and 2D GNSs acted as effective nucleating agents, with a noticeably increased onset crystallization temperature of EVA. A high weight fraction of nano-fillers slowed the overall crystallization rate of composites. At the same crystallization temperatute, the crystallization behavior of GNS/EVA composites was slowed compared to that of the CNT/EVA ones owing to larger nucleus barrier and activation energy of diffusion. Dynamic mechanical relaxation and rheology behavior of CNT/EVA and GNS/EVA composites demonstrated that the planar structure of the GNSs had an intensively negative effect on EVA chain mobility due to interactions between nano- fillers and polymer chains, as well as spatial restriction.
文摘The goal is to develop a hybrid IPN network of polyvinyl acetate (PVAc) and ethylene-vinyl acetate (VAE). In this research work, the vinyl acetate (VAc)/ VAE hybrid emulsion and polyvinyl acetate emulsion (PVAc) were effectively synthesized. Emulsions with various characteristics have been developed by adjusting the weight ratios between the vinyl acetate monomer and the VAE component. The impacts on the mechanical, thermal, and physical properties of the films were investigated using tests for pencil hardness, tensile shear strength, pH, contact angle measurement, differential scanning calorimetry (DSC), and viscosity. When 5.0 weight percent VAE was added, the tensile shear strength in dry conditions decreased by 18.75% after a 24-hour bonding period, the heat resistance decreased by 26.29% (as per WATT 91) and the tensile shear strength decreased by approximately 36.52% in wet conditions (per EN 204). The pristine sample’s results were also confirmed by the contact angle test. The interpenetrating network (IPN) formation in hybrid PVAc emulsion as primary bonds does not directly attach to PVAc and VAE chains. The addition of VAE reduced the mechanical properties (at dry conditions) and heat resistance as per WATT 91. Contact angle analysis demonstrated that PVAc adhesives containing VAE had increased water resistance when compared to conventional PVA stabilised PVAc homopolymer-based adhesives. When compared to virgin PVAc Homo, the water resistance of the PVAc emulsion polymerization was enhanced by the addition of VAE.
文摘The discarded feathers / ethylene vinyl acetate copolymer( EVA) thermoplastic composite materials was obtained with discarded feathers as reinforced material and EVA powders as matrix material by hot pressing method. Sound absorption properties were studied by changing mass ratio of discarded feathers and EVA,thickness of composite materials,hot pressing pressure and hot pressing temperature. It was found that the sound absorption properties of composite materials were good when the mass ratio of discarded feathers and EVA was 1: 1,thickness of composite materials was 30 mm,hot pressing pressure was 8 MPa,and hot pressing temperature was 80 ℃. Under the optimum conditions,the effect of composite density on sound absorption property was analyzed. In a certain range,the sound absorption property was enhanced with the decrease of the composite density.When the composite density was 0. 1g /cm^3, the maximum absorption coefficient was 0.96. Finally,the capillary theory was used to calculate the maximum sound absorption coefficient of discarded feathers / EVA thermoplastic composite materials. The good agreements of experimental results and calculated results proved the validity of the theoretical models.
基金Supported by the National Natural Science Foundation of China
文摘The copolymer of vinyl acetic ester and acrylonitrile is used to react with [Rh（CO）<sub>2</sub>Cl]<sub>2</sub>to form a complex which can be used in the carbonylation of methyl acetate to acetic anhydride. Many factors affecting the reaction rate, catalytic activity and selectivity have been investigated. The reaction rate depends on rhodium complex and methyl iodide, and is differant from that of homogenous small molecular rhodium complex catalyst. It is revealed thatthe reaction rate is zero order in CO, first order in Rh and LiOAc, but the order in CH<sub>3</sub>I is complicated. The causes of these phenomena are discussed based on the mechanism of carbonylation of methyl acetate.
基金This work was supported by a Grant from the National Natural Science Foundation of China
文摘A series of porous microspheres of linear and ethylene diacrylate (M') cross-linked copolymers of 2-vinylpyridine (V) and methyl acrylate (M) reacted with tetracarbonyldichlorodirhodium to form a series of cis-dicarbonylrhodium chelate complex (MVRh and MVM 'Rh). They are thermally stable yet very reactive in the carbonylation of methanol to acetic acid, and of methanol-acetic acid mixture to acetic acid and acetic anhydride with a selectivity of 100% under relatively mild and anhydrous conditions.
基金This work was supported by the National Natural Science Foundation of China (No. 29774027).
文摘Poly(methyl acrylate)-b-poly(5,6-benzo-2-methylene-1,3-dioxepane) (PMA-b-PBMDO) was synthesized by two-step atom transfer radical polymerization (ATRP). Firstly, ATRP of methyl acrylate (MA) was realized using ethyl alpha-bromobutyrate (EBrB) as initiator in the presence of CuBr/2,2'-bipyridine. After isolation, poly(methyl acrylate) with terminal bromine (PMA-Br) was synthesized. Secondly, the resulting PMA-Br was used as a macromolecular initiator in the ATRP of BMDO. The structure of block copolymer was characterized by H-1-NMR spectroscopy. Molecular weight and molecular weight distribution were determined on a gel permeation chromatograph (GPC).
