Synthesis and Characterization of Chitosan-g-poly- (D, L-lactic acid) Copolymer

Biodegradable chitosan-g-poly (D, L-lactic acid) copolymers were prepared via two methods. (1) The lactide was grafted onto hydroxyl groups of chitosan by using macromolecular initiator sodium of trimethylsilyl-chitosan, (2) poly (D,L-lactic acid)(PLA) with low molecular weight can be linked to the amino group by coupling activated PLA to trimethylsilyl-chitosan. Two graft copolymers had hydrophilic-hydrophobic character and can be applied as carriers for drug delivery.

PHOTO-INDUCED DOPED POLYANILINE BY THE VINYLIDENE CHLORIDE AND METHYL ACRYLATE COPOLYMER AS PHOTO ACID GENERATOR

The emeraldine base form of polyaniline (PANI) can be doped by a photo-induced doping method. In this method a. copolymer of vinylidene chloride and methyl acrylate (VCMAC) was used as photo acid generator which can release proton when it is exposed to ultraviolet light (lambda = 254 nm). The structure of PANI-VCMAC system before and after irradiation was characterized by elemental analysis, IR, XTP, anti SEM images. Results obtained indicate that the photo-induced doping characteristics, such as doping position and type of charge carriers, are similar to that of PANI doped with HCl. The poor room-temperature conductivity (similar to 10-S-5/cm) of PANI-VCMAC system after irradiation may be due to low doping degree (similar to pH=3) and the difference in morphology as compared with PANI-HCl film.

SYNTHESIS AND THERMAL PROPERTIES OF A NEW CHOLIC ACIDCONTAINING COPOLYMER

A new copolymer was synthesized by free radical polymerization in solution from methyl 3α-methylacryloyl-7α, 12α-dihydroxy-5β-cholan-24-oate (MACAME) and maleic anhydride (MAN). The copolymer was characterized by FT-IR and functional group analysis. The reactivity ratios of the two monomers were estimated [r_1 = 11.6 (MACAME), r_2 = 0.01(MAN)] by conducting a series of copolymerizations with a variety of monomer feed compositions and analyzing thecopolymer composition. Thermogravimetric and differential scanning calorimetric analyses of the samples indicate that thecopolymer possesses good thermal stability. The temperature at which the copolymer samples experienced a 10% weight loss(T_(WL)) is over 287℃, and the T_g ranged from 174 to 185℃ for the copolymers.

SELECTIVE SEPARATION OF WATER-ETHANOL MIXTURES THROUGH COPOLYMERIC MEMBRANES: Ⅰ. ACRYLIC ACID AND ACRYLONITRILE COPOLYMER AND ITS IONIZED MEMBRANES

The copolymer of acrylic acid and acrylonitrile has been synthesized and pervaporation properties of the copolymeric membranes have been investigated. In order to elucidate the influence of membrane-permeate interaction on the pervaporation of water-ethanol mixtures and to prepare much improved membranes, the membranes have been treated with alkali metal, alkali earth metal and transition metal salt aqueous solutions. The treated membranes (ionized membranes) exhibited higher separation factors than the untreated membranes. The separation factors of various alkali metal cation membranes decreased in the following order : Li^+>Na^+>K^+, and the permeation rates showed an opposite tendency. The dependence of pervaporation behavior on the copolymer composition ,feed concentration and operating temperature have been studied with both ionized and non-ionized membranes. The apparent activation energies of water and ethanol permeation were calculated.

Influence of Block Copolymer on Formation and Acid Resistant Properties of Hybrid CaCO_3 Particles

Block copolymer polystyrene-b-poly（acrylic acid）（PS-b-PAA） was used as structural template for the synthesis of CaCO3 microparticles. Through this procedure, acid resistant hybrid CaCO3 micro- spheres were obtained. Acid resistant properties of this type of hybrid CaCO3 were studied. Size measurement shows that the acid resistant properties of the hybrid particles are different in different solutions, such as HCl, EDTA, and H2SO4 solutions.

SYNTHESIS OF NOVEL BLOCK COPOLYMERS OF POLY(3-HYDROXYBUTYRIC ACID)WITH POLY(ETHYLENE GLYCOL)THROUGH ANIONIC POLYMERISATION

A novel kind of copolymer with ABA-type block structure was synthesized by anionic ring-opening polymerization of beta-butyrolactone (beta-BL) in the presence of a PEG-based dicarboxylates as macroinitiators which were prepared by the esterification of aliphatic cyclic anhydride and poly(ethylene glycol) (PEG) oligomers (M-n = 2000, 4000 and 6000) and conversion of potassium dicarboxylates. The resultant copolymers as well as the intermediates were characterized by IR, H-1-NMR and GPC.

A NOVEL COPOLYMER-BOUND CIS-DICARBONYLRHODIUM COMPLEX FOR THE CARBONYLATION OF METHANOL TO ACETIC ACID AND ACETIC ANHYDRIDE

A series of porous microspheres of linear and ethylene diacrylate (M') cross-linked copolymers of 2-vinylpyridine (V) and methyl acrylate (M) reacted with tetracarbonyldichlorodirhodium to form a series of cis-dicarbonylrhodium chelate complex (MVRh and MVM 'Rh). They are thermally stable yet very reactive in the carbonylation of methanol to acetic acid, and of methanol-acetic acid mixture to acetic acid and acetic anhydride with a selectivity of 100% under relatively mild and anhydrous conditions.

Preparation of Poly ( L-lactic acid ) / Vermiculites Composites by in situ Copolymerization of Lactic Acid and Hydroxylic Vermiculites

L-lactic acid (L-LA) based copolymer/hydroxylation vermiculites composites (PLLA-co-bis A/HVMTs) were prepared by in situ reaction among L-LA, adipic acid, and hydroxylation lamellar vermiculites (HVMTs) using bisphenol-A epoxy resin as chain extending agent. HVMTs were obtained by sulfuric acid-leaching of lamellar vermiculites (VMTs). The effects of sulfuric acid leaching on the VMTs structure were characterized by X-ray diffraction (XRD), 29Si magic-angle spinning nuclear magnetic resonance(29Si NMR), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FE-SEM), and thermogravimetric analysis (TGA). FTIR, FE-SEM, and TGA were used to characterize the reaction activity of HVMTs. The results indicated that VMTs with increased hydroxyl groups had been successfully obtained and could react with -COOH of the reaction system. The amount of L-LA based copolymer grafted on the surface of HVMTs was more than 22%. The onset decomposition temperature of L-LA based copolymer grafted on the surface of HVMTs was 30℃ higher than that of free L-LA based copolymer.

The Optimized Synthesis of Starch-g-Lactic Acid Copolymer with High Grafting Degree Catalyzed by Sulfuric Acid

The starch-g-lactic acid copolymer was synthesized with catalysis of sulfuric acid by onestep process, and the structure of starch-g-lactic acid copolymer was characterized by means of IR, 13C-NMR, HMBC, XRD, and SEM. The experimental results show that the maximum grafting degree of starch can reach 75% when the starch-g-lactic acid copolymer is activated at 80 ℃ for 2 h and reacted with lactic acid at 90 ℃ for 4 h in vacuum.

Synthesis and application of lignin-based copolymer LSAA on controlling non-point source pollution resulted from surface runoff

In this article,alkali lignin separated from paper pulp waste was grafted into a novel copolymer LSAA (a copolymer of lignin,starch, acrylamide,and acrylic acid).Its practical application effect and environmental safety were studied.The results of field simulation experiment indicated that the application of LSAA significantly affected the output of the runoff and pollutants.The runoff quantity was decreased by 16.67%-47.00%and the loads of total suspended solids (TSS),chemical oxygen demand (COD),total nit...

Comparison of selective flocculation of low grade goethitic iron ore fines using natural and synthetic polymers and a graft copolymer

This study aims to beneficiate low grade goethitic iron ore fines using a selective flocculation process. Selective flocculation studies were conducted using different polymers such as starch amylopectin(AP), poly acrylic acid(PAA), and a graft copolymer(AP-g-PAA). The obtained results were analyzed; they indicate the enhancement of the iron ore grade from 58.49% to 67.52% using AP-g-PAA with a recovery of 95.08%. In addition, 64.45% Fe with a recovery of 88.79% was obtained using AP. Similarly, using PAA, the grade increased to 63.46% Fe with a recovery of 82.10%. The findings are also supported by characterizing concentrates using X-ray diffraction(XRD) and electron probe microanalysis(EPMA) techniques.

Weavability of β-Hydroxybutyrate and β-Hydroxyvalerate Copolymers( PHBV ) /PLA Used in Artificial Blood Vessels

The β-hydroxybutyrate and β-hydroxyvalerate copolymers( PHBV) /polylactic acid( PLA) is a new biocompatible material,which is developed through bacterial fermentation in vivo systems.The PHBV / PLA material could be used to make continuous filaments.However,features of artificial blood vessels,especially small diameter vascular grafts made of PHVB / PLA materials are not known.This research are to evaluate and improve weavability of the PHBV / PLA material, and to explore feasibility of using it in artificial blood vessels.Preliminary results showed that weavability of PHBV / PLV was not good,but its weavability could be improved by using methods of weak chemical,such as sizing.In this research,scanning electron microscope( SEM) was adopted to evaluate weavability of PHBV / PLV after sizing and observe surfaces of yarns and fabrics.Also,in order to set proper parameters in heat settings,differential scanning calorimetry( DSC) was used to identify glass transition temperature.

Effect of Poly(ε-caprolactone-b-tetrahydrofuran)Triblock Copolymer Concentration on Morphological,Thermal and Mechanical Properties of Immiscible PLA/PCL Blends

In this study a low molecular weight triblock copolymer derived fromε-caprolactone and tetrahydrofuran was used as a non-reactive compatibilizer of immiscible PLA/PCL blends.Ternary blends with 0,1.5 wt%,3 wt%and 5 wt% copolymer and about 75 wt%PLA were prepared by single screw extrusion and characterized by scanning electron microscopy(SEM),differential scanning calorimetry(DSC),dynamic mechanical analysis(DMA),tensile and Izod impact testing.SEM micrographs showed that the size of the dispersed PCL domains was practically constant regardless of copolymer concentration.This result can be explained by the low shear rate employed during processing step and a decrease of PCL viscosity by presence of the triblock copolymer.However,when the copolymer concentration increased,strain at break of PLA/PCL blends also increased.PLA/PCL blend with 0 wt% copolymer presented 2%strain at break,whereas PLA/PCL blend with 5 wt%copolymer exhibited 90%.

Synthesis and Characterization of Degraded Gelatin Grafted Poly(ε-caprolactone) Copolymers

Hydrophilic degraded gelatin was modified with hydrophobic poly(ε-caprolactone) (PCL) via a chemical grafting route.Firstly,PCL with one hydroxyl end group was prepared by the ring-opening polymerization of εcaprolactone (ε-CL) with tin (Ⅱ) 2-ethylhexanoate as catalyst and n-butyl alcohol as initiator.Secondly,the PCL reacted with isophorone diisocyanate (IPDI) to prepare PCL with isocyanate functional group (PCL-NCO).Hydroxylamine was used to degrade gelatin by the cleavage between asparagine and glycine residues of gelatin.PCL-NCO reacted with the hydroxyl/amino groups of degraded gelatin in a homogeneous system and yielded the PCL modified gelatin copolymers.The gelatin grafted PCL copolymers were measured by means of XRD,FTIR,DSC and 1 H NMR.The results confirmed the conjugation of PCL onto gelatin chains.The PCL modified gelatin can be used as biomaterials owing to their biocompatibility and biodegradation.

Effect of the Side Chain Structure on Hydrolysis Degradation of Zinc Acrylate Copolymers

In this report,zinc acrylate copolymers were synthesized by used different organic acid as the side chain structure.These copolymers were further characterized by GPC,DSC and Water absorption analysis respectively,and then the effects of the chain structure of organic acid on hydrolysis degradation and copper release rate were also discussed.In the meantime,the result shows that the biocide release rate could be controlled by used different chain structure of organic acid.

Synthesis and Characterization of Novel Copolymers Based on 3(S)-Methyl-Morpholine-2,5-Dione

A series of novel copolymers were successfully synthesized by ring-opening polymerization(ROP) of 3(S)-methyl-morpholine-2,5-dione(MMD) and 5-methyl-5-benzyloxycarbonyl-1,3-dioxan-2-one(MBC) using stannous octoate as catalyst.The copolymers were characterized by means of 1 H-NMR and FT-IR spectroscopy.Gel permeation chromatography(GPC) test shows that the average-number relative molecular mass and average-weight relative molecular mass slightly increase with the increase of MBC content in feed.The results of differential scanning calorimetry(DSC) demonstrate that the glass transition temperature of copolymers increases with the increase of MBC content in copolymers.The copolymers of MMD and MBC are amorphous copolymers,as indicated by DSC results,while the homopolymer of MMD is semicrystalline.

3D打印工艺参数对PLA/PTW共混物力学性能影响的研究

采用3D打印中的熔融沉积成型(FDM)工艺制备了聚乳酸/乙烯-丙烯酸丁酯-甲基丙烯酸缩水甘油酯共聚物(PLA/PTW),通过单因素实验探究了3D打印工艺参数(喷头温度、打印平台温度和打印速度)对PLA/PTW共混物力学性能的影响,并在此基础上设计了三因素三水平正交实验,优化了3D打印的工艺参数。结果表明,共混物的冲击强度和拉伸强度均随喷头温度的增加呈现先上升后下降、均随打印平台温度的增加而增加、均随打印速度的增加出现下降的趋势。各工艺参数对PLA/PTW共混物综合力学性能的影响从大到小依次为:喷头温度、打印速度、打印平台温度,且当喷头温度为210℃、打印平台温度为80℃以及打印速度为40 mm/s时,打印出的PLA/PTW共混物的综合力学性能最佳。

眼用曲安奈德微球的制备工艺优化及体外释放研究

目的:研究眼用曲安奈德微球的制备工艺优化及体外释放方法。方法:采用超声乳化、减压蒸发、冷冻干燥法制备聚乳酸-羟基乙酸共聚物(PLGA)/曲安奈德(TA)微球,优化制备工艺并进行体外药物释放研究。结果:TA/PLGA投料比为30∶70,二氯甲烷/乙酸乙酯为50∶50,PLGA比例(分子量a∶b)为75∶25,PLGA投料量为1500 mg,乳化剂浓度为1%是最佳工艺参数。PLGA-TA微球释放的实时药物浓度和累积释放率低于TA原料药,差异有统计学意义(P<0.05)。结论:与TA原料药相比,PLGA-TA微球的药物释放速率较慢,表现出良好的缓释性能,为后续开展体内研究提供了体外数据支持。

成骨诱导因子缓释系统修饰国产多孔钽对MG63细胞功能的影响

背景:课题组前期研究发现,国产多孔钽有利于MG63细胞的早期黏附、增殖,可用作骨组织工程支架材料。目的:进一步探讨成骨诱导因子缓释系统修饰的国产多孔钽对MG63细胞黏附增殖及分化能力的影响。方法:在聚乳酸-羟基乙酸共聚化合物凝胶中加入体积分数为15%的成骨诱导因子溶液,构成成骨诱导因子缓释系统。取第3代MG63细胞,分别接种于单纯多孔钽表面(对照组)、聚乳酸-羟基乙酸共聚化合物凝胶涂覆的多孔钽表面(凝胶涂覆组)、成骨诱导因子缓释系统涂覆的多孔钽表面(缓释系统涂覆组),共培养5 d后,利用鬼笔环肽染色观察材料表面细胞骨架,流式细胞仪检测细胞增殖,Western blot、RT-qPCR检测材料表面细胞Ⅰ型胶原、骨桥蛋白、RUNX-2的蛋白和mRNA表达。结果与结论:①鬼笔环肽染色显示,MG63细胞在3组多孔钽表面及内部黏附生长,细胞分泌的基质覆盖在材料表面;②流式细胞仪检测显示,缓释系统涂覆组细胞增殖快于对照组、凝胶涂覆组(P<0.05);③Western blot、RT-qPCR检测显示,缓释系统涂覆组Ⅰ型胶原、骨桥蛋白、RUNX-2的蛋白和mRNA表达均高于对照组、凝胶涂覆组(P<0.05);④结果表明,经成骨诱导因子缓释系统修饰的国产多孔钽有利于MG63成骨细胞的黏附、增殖及分化。

MAM相对分子质量对PLA/PBAT/MAM共混物结构与性能的影响

通过熔融共混法制备聚乳酸/聚己二酸对苯二甲酸丁二酯/聚(甲基丙烯酸甲酯)-b-聚(丙烯酸丁酯)-b-聚(甲基丙烯酸甲酯)(PLA/PBAT/MAM)三元共混物,研究了MAM相对分子质量对PLA/PBAT/MAM三元共混物形态、结构和性能的影响。结果表明,添加MAM嵌段共聚物,能够有效改善PLA与PBAT的相容性,使共混物的玻璃化温度下降,结晶消失,使分散相粒子尺寸下降,分布更加均匀,提高共混物的冲击强度和断裂伸长率;MAM相对分子质量越大,共混物的冲击强度和断裂伸长率越大,分散相粒子尺寸越小,粒径分布越均匀。