期刊文献+
共找到2,635篇文章
< 1 2 132 >
每页显示 20 50 100
Synthesis and Luminescence Improvement of CaAlSiN_(3) Phosphors Doped with Eu^(2+) and Mn^(2+) for White LEDs
1
作者 WEI Dong SU Wenxia 《发光学报》 EI CAS CSCD 北大核心 2024年第10期1656-1666,共11页
Eu^(2+) and Mn^(2+) co-activated CaAlSiN_(3) red phosphors were produced using the solid-state reaction tech⁃nique in a N2 environment.Excitation spectra,emission spectra,and diffuse reflection spectra were used to st... Eu^(2+) and Mn^(2+) co-activated CaAlSiN_(3) red phosphors were produced using the solid-state reaction tech⁃nique in a N2 environment.Excitation spectra,emission spectra,and diffuse reflection spectra were used to study the luminescence characteristics,energy gap,and thermal stability in detail.CaAlSiN_(3)∶Eu^(2+) exhibits an extended emission band when stimulated with 450 nm blue light,which is caused by the 4f65d to 4f7 transition of Eu^(2+).Similar⁃ly,CaAlSiN_(3)∶Mn^(2+) displays a wide emission band centered at 628 nm,which results from Mn^(2+)’s transition from 4T1(4G) to 6A1(6S).When the ions of Mn^(2+)were combined into CaAlSiN_(3)∶Eu^(2+),the photoluminescence intensity of Eu^(2+ )was greatly boosted because there was energy transfer and co-emission between Mn^(2+) and Eu^(2+).Beyond that,CaAlSiN_(3)∶Eu^(2+),Mn^(2+) emerges with splendid thermostability and high quantum efficiency,the quenching temperature surpasses 300℃,and the internal quantum efficiency is determined to be around 84.9%.The white LED was pack⁃aged with a combination of CaAlSiN_(3)∶Eu^(2+),Mn^(2+),LuAG∶Ce3+ and a blue chip.At a warm white-light corresponding color temperature(3009 K) with CIE coordinates(0.4223,0.3748),the color rendering index Ra has reached 93.2.CaAlSiN_(3)∶Eu^(2+),Mn^(2+) would have great application potential as a red-emitting phosphor for white LEDs. 展开更多
关键词 energy transfer silicon nitrides CaAlSiN_(3)∶Eu^(2+) Mn^(2+) red phosphor
下载PDF
高压水蒸气对β-Li_(2)TiO_(3:)Eu^(3+)荧光粉的全谱发光性能影响
2
作者 于成龙 刘冠华 +6 位作者 刘子航 金党波 程航 齐勇 王志齐 李海 王秀峰 《陕西科技大学学报》 北大核心 2024年第2期138-145,共8页
采用水热法制备荧光粉前驱体后通过高温煅烧的方法,合成了由电偶极跃迁主导的高色纯度的β-Li_(2)TiO_(3):Eu^(3+)红色荧光粉.设计了适用于DHT11的拓扑电路,对荧光粉体湿度和温度进行测试.研究发现,高压腔体中加水量为5 mL,β-Li_(2)TiO... 采用水热法制备荧光粉前驱体后通过高温煅烧的方法,合成了由电偶极跃迁主导的高色纯度的β-Li_(2)TiO_(3):Eu^(3+)红色荧光粉.设计了适用于DHT11的拓扑电路,对荧光粉体湿度和温度进行测试.研究发现,高压腔体中加水量为5 mL,β-Li_(2)TiO_(3):0.5 mol%Eu^(3+)的相对湿度可达81%RH.在波长为396 nm的近紫外光激发下,β-Li_(2)TiO_(3):0.5 mol%Eu^(3+)发射由电偶极跃迁主导的613 nm的红光,荧光寿命为773.36μs,高压水蒸气处理对β-Li_(2)TiO_(3):0.5 mol%Eu^(3+)的电偶极跃迁发射峰和磁偶极跃迁发射峰位置没有变化,但发射峰强度增强并且荧光寿命降至386.81μs.高压水蒸气高压处理后的荧光粉色坐标x=0.47,y=0.51,色温为3300 K,红光色纯度为96.6%,比高压处理前显示出更优异的显色性能.高压水蒸气处理后的β-Li_(2)TiO_(3):0.5 mol%Eu^(3+)电偶极跃迁谱线强度参数Ω_(2)增加至4.21×10^(-19)cm^(2),^(5)D_(0)→^(7)F_(2)跃迁的荧光分支比β2也增加至96.9%,而量子效率η减小至57%,证实了湿度对荧光粉的发光效率具有极大的影响. 展开更多
关键词 高压水蒸气 β-Li_(2)TiO_(3:)Eu^(3+)荧光粉 湿度
下载PDF
Bi^(3+)、Eu^(3+)共掺杂La_(4)GeO_(8)荧光粉的制备及可调发光 被引量:1
3
作者 张文娜 黎仲寅 +3 位作者 马纪涛 陈娅鹏 杨菲 郭海 《发光学报》 EI CAS CSCD 北大核心 2024年第3期450-457,共8页
为了开发出高效稳定的单一基质白光发射荧光材料,本工作通过高温固相法成功合成了一系列La_(4)GeO_(8)∶Bi^(3+),Eu^(3+)荧光粉样品,并通过X射线衍射、室温光谱、变温光谱等手段研究了实验样品的结构与发光性能。研究发现,Bi^(3+)离子... 为了开发出高效稳定的单一基质白光发射荧光材料,本工作通过高温固相法成功合成了一系列La_(4)GeO_(8)∶Bi^(3+),Eu^(3+)荧光粉样品,并通过X射线衍射、室温光谱、变温光谱等手段研究了实验样品的结构与发光性能。研究发现,Bi^(3+)离子在该结构中占据两种不同的格位(Bi^(3+)(Ⅰ)和Bi^(3+)(Ⅱ)),且在紫外光激发下呈现两个峰值分别在475 nm和620 nm的宽带发射。对于Bi^(3+)、Eu^(3+)共掺样品,由于Bi^(3+)(Ⅰ)与Eu^(3+)之间的竞争吸收、Bi^(3+)(Ⅰ)至Bi^(3+)(Ⅱ)以及Bi^(3+)(Ⅱ)至Eu^(3+)的能量传递作用,可实现蓝色至红色、橙红色至红色的可调发光。特别地,样品La_(4)GeO_(8)∶0.07Bi^(3+),0.06Eu^(3+)在313 nm光激发下可获得CIE值为(0.335,0.319)的优异白色发光。此外,该白光发射材料具有较佳的发光热稳定性,当温度升高至380 K时,发光积分强度仍然为室温的59%,表明其在白光二极管上具有潜在的应用价值。 展开更多
关键词 La_(4)GeO_(8)∶Bi^(3+) Eu^(3+) 可调发光 发光热稳定性 白光二极管
下载PDF
基于Eu^(3+)-生物质碳量子点探针的比率型荧光传感体系检测盐酸四环素 被引量:1
4
作者 李春雨 赵卓君 +1 位作者 白万乔 高楼军 《分析测试学报》 CAS CSCD 北大核心 2024年第4期600-606,共7页
该文以橙皮为原料制备的碳量子点(CDs)与铕离子(Eu^(3+))构建双发射比率型荧光探针(Eu^(3+)-CDs)并用于抗生素盐酸四环素的检测。在370 nm激发波长下,Eu^(3+)-CDs荧光探针在425 nm处出现较强的蓝色荧光峰,在617 nm处出现较弱的红色荧光... 该文以橙皮为原料制备的碳量子点(CDs)与铕离子(Eu^(3+))构建双发射比率型荧光探针(Eu^(3+)-CDs)并用于抗生素盐酸四环素的检测。在370 nm激发波长下,Eu^(3+)-CDs荧光探针在425 nm处出现较强的蓝色荧光峰,在617 nm处出现较弱的红色荧光峰。随着盐酸四环素浓度的逐渐增大,Eu3+与盐酸四环素螯合形成的配合物增多,在425 nm处的CDs荧光(I_(F425))逐渐减弱,而617 nm处铕配合物的荧光(I_(F617))逐渐增强,可基于荧光强度比I_(F617)/I_(F425)的变化对盐酸四环素进行测定。考察了Eu^(3+)的浓度、pH值和反应时间对探针荧光强度的影响。在最佳条件下,该双发射比率型荧光探针对盐酸四环素具有特异性识别能力,荧光强度比(I_(F617)/I_(F425))与盐酸四环素浓度在10~100µmol/L范围内存在良好的线性关系,相关系数r^(2)=0.9926,检出限为5.09µmol/L。该方法成功用于猪肉中盐酸四环素含量的检测,加标回收率为102%~110%,相对标准偏差为0.20%~2.4%,具有较好的实用性。 展开更多
关键词 双发射比率型荧光探针 碳量子点(CDs) 铕离子(Eu^(3+)) 盐酸四环素
下载PDF
用于痕量监测Zr^(4+)、Cr_(2)O_(7)^(2-)、Fe^(3+)、HPO_(4)^(2-)和指纹识别的功能化Eu^(3+)/Tb^(3+)配位聚合物荧光探针的构筑
5
作者 王思璐 张凤凤 +5 位作者 张成 王潇 唐龙 岳二林 王记江 侯向阳 《无机化学学报》 SCIE CAS CSCD 北大核心 2024年第2期441-450,共10页
采用芳香族π共轭及含氮原子有机连接剂,合成同构铽、铕发光配位聚合物(CPs){[Eu(PLIA)_(1.5)(H_(2)O)_(2)]·H_(2)O}_(n)(1)和{[Tb(PLIA)_(1.5)(H_(2)O)_(2)]·H_(2)O}_(n)(2),其中H_(2)PLIA=5-((吡啶-4-基甲基)氧基)苯-1,3-... 采用芳香族π共轭及含氮原子有机连接剂,合成同构铽、铕发光配位聚合物(CPs){[Eu(PLIA)_(1.5)(H_(2)O)_(2)]·H_(2)O}_(n)(1)和{[Tb(PLIA)_(1.5)(H_(2)O)_(2)]·H_(2)O}_(n)(2),其中H_(2)PLIA=5-((吡啶-4-基甲基)氧基)苯-1,3-二甲酸。对合成的配合物进行了结构测定、表征和荧光痕量识别实验研究。2个同构配合物具有理想的三维框架结构,π…π堆积及氢键等弱相互作用增强了其化学稳定性;表征显示配位聚合物1和2具有良好的荧光性质、结晶性、热力学稳定性及结构完整性,可作为荧光传感的材料。1和2对水溶液中的Zr^(4+)、Cr_(2)O_(7)^(2-)和Fe^(3+)、HPO_(4)^(2-)具有选择性好、灵敏度高的荧光识别能力,其检出限分别为0.139μmol·L^(-1)(1,Zr^(4+))、0.626μmol·L^(-1)(1,Cr_(2)O_(7)^(2-))、0.430μmol·L^(-1)(2,Fe^(3+))、1.36μmol·L^(-1)(2,HPO_(4)^(2-))。探究了1和2作为探针的荧光猝灭机理。更有趣的是,1和2具有指纹识别性能,其荧光指纹纹路清晰连贯,细节明显,可被清晰观察。 展开更多
关键词 Eu^(3+)/Tb^(3+)配位聚合物 合成 表征 荧光探针 指纹识别
下载PDF
Sr_(2)InP_(3)O_(11):Eu^(3+)红色荧光粉的发光性能及占位影响
6
作者 梁力 赵淑娟 +3 位作者 李贵花 刘一佳 王荣荣 蔡格梅 《发光学报》 EI CAS CSCD 北大核心 2024年第6期913-922,共10页
红色荧光粉是提高发光二极管(LED)显色指数、降低色温的重要组分。本文选择具有红色特征发射的Eu^(3+)作为激活剂离子,以新型磷酸盐Sr_(2)InP_(3)O_(11)为荧光粉基质,通过高温固相反应合成了系列Sr_(2-x)InP_(3)O_(11):xEu^(3+)(简化为S... 红色荧光粉是提高发光二极管(LED)显色指数、降低色温的重要组分。本文选择具有红色特征发射的Eu^(3+)作为激活剂离子,以新型磷酸盐Sr_(2)InP_(3)O_(11)为荧光粉基质,通过高温固相反应合成了系列Sr_(2-x)InP_(3)O_(11):xEu^(3+)(简化为S_(2-x)IP_(3):xEu^(3+))和Sr_(2)In_(1-x)P_(3)O_(11):xEu^(3+)(简化为S_(2)I_(1-x)P_(3):xEu^(3+))荧光粉。利用XRD、室温及变温PL光谱、量子效率和荧光寿命,详细研究了所制备荧光粉的光致发光性能及其受阳离子位点(Sr位和In位)的影响规律。研究结果表明,这两类荧光粉在254nm和393nm激发下均可发出明亮的橘红光(593nm和612nm主导)。此外,所合成的荧光粉具有较好的色稳定性和热稳定性,表明其在荧光粉转换型白光LED照明和显示领域具有一定的发展潜力。 展开更多
关键词 荧光粉 Eu^(3+)掺杂 占位 发光性能
下载PDF
红色荧光粉CaWO_(4)∶Eu^(3+),Bi^(3+)的制备和光学性能的研究
7
作者 蔡小勇 姜洪喜 《人工晶体学报》 CAS 北大核心 2024年第5期833-840,共8页
本文采用高温固相法合成了一系列红色荧光粉CaWO_(4)∶Eu^(3+),Bi^(3+)。通过X射线衍射仪、扫描电子显微镜和荧光分光光度计等手段,对样品的晶体结构、微观形貌、光学性能、能量传递方式、荧光寿命和热稳定性进行了表征。结果表明,当Eu^... 本文采用高温固相法合成了一系列红色荧光粉CaWO_(4)∶Eu^(3+),Bi^(3+)。通过X射线衍射仪、扫描电子显微镜和荧光分光光度计等手段,对样品的晶体结构、微观形貌、光学性能、能量传递方式、荧光寿命和热稳定性进行了表征。结果表明,当Eu^(3+)和Bi^(3+)的掺杂浓度分别为7%和2%时(摩尔分数),荧光粉红色发光(615 nm)最强,理论计算得到荧光粉的平均颗粒尺寸为50.27 nm,这与电子显微镜观察结果相符合。能量传递方式以电偶极-电四极相互作用为主,对CaWO_(4)∶7%Eu^(3+),yBi^(3+)(y=0~6%)系列荧光粉进行了荧光寿命测量,发现它们荧光寿命基本相同,都在0.56 ms左右。对CaWO_(4)∶7%Eu^(3+),2%Bi^(3+)荧光粉在不同温度下的光谱进行比较,并且计算相应的色度坐标,当温度升高时,色度坐标整体左移,发光强度有所变弱,但整体来说热稳定性较好。较好的热稳定性和明亮红光发射表明该荧光粉可以作为潜在商用红光荧光粉。 展开更多
关键词 CaWO_(4) 掺Eu^(3+) 掺Bi^(3+) 高温固相法 荧光粉 敏化剂 荧光寿命 热稳定性
下载PDF
Dy^(3+)/Eu^(3+)双掺杂CaLaGa_(3)O_(7)颜色可调荧光粉的制备与发光性能
8
作者 刘云云 黄传鑫 +1 位作者 王猛 王燕 《人工晶体学报》 CAS 北大核心 2024年第9期1560-1567,共8页
本文采用高温固相法成功制备了一系列Eu^(3+)单掺和Dy^(3+)/Eu^(3+)双掺CaLaGa_(3)O_(7)单基质荧光粉。通过X射线衍射和发射光谱对荧光粉的物相及发光性能进行了表征。结果表明,所制备的样品均为四方结构,与基质晶体一致,表明成功合成了... 本文采用高温固相法成功制备了一系列Eu^(3+)单掺和Dy^(3+)/Eu^(3+)双掺CaLaGa_(3)O_(7)单基质荧光粉。通过X射线衍射和发射光谱对荧光粉的物相及发光性能进行了表征。结果表明,所制备的样品均为四方结构,与基质晶体一致,表明成功合成了Eu^(3+)单掺和Dy^(3+)/Eu^(3+)双掺杂的CaLaGa_(3)O_(7)荧光粉。在波长393 nm近紫外光激发下,Eu^(3+)∶CaLaGa_(3)O_(7)表现出Eu^(3+)的特征红光发射(5 D0→7 F2),并且发光纯度高达100%。共掺Dy^(3+)之后,Dy^(3+)/Eu^(3+)双掺CaLaGa_(3)O_(7)荧光粉不仅可以被波长393 nm的光激发还可以被波长348 nm的光激发。不管是哪个波长的光激发,Dy^(3+)/Eu^(3+)∶CaLaGa_(3)O_(7)发射光谱同时包含了Eu^(3+)的特征红光发射和Dy^(3+)的特征黄光发射(4 F_(9/2)→6 H_(13/2))。通过对发射谱和荧光寿命分析得出,双掺荧光粉中Dy^(3+)和Eu^(3+)之间存在有效的能量传递过程。进一步计算了各个样品对应的色坐标,结果表明当激发波长由348 nm改变为393 nm时,色坐标整体上从黄绿色区域移动到黄橙光区域。因此,Dy^(3+)/Eu^(3+)∶CaLaGa_(3)O_(7)是一种光色可调发光材料,在显示和固态照明方面具有良好的应用前景。 展开更多
关键词 CaLaGa_(3)O_(7) Dy^(3+)/Eu^(3+)双掺杂 荧光粉 发光性能 颜色可调 高温固相法
下载PDF
Preparation and characterization of Eu^(3+)-doped CaCO_3 phosphor by microwave synthesis 被引量:14
9
作者 KANG Ming LIU Jun +1 位作者 YIN Guangfu SUN Rong 《Rare Metals》 SCIE EI CAS CSCD 2009年第5期439-444,共6页
A Eu^3+-doped CaCO3 phosphor with red emission was prepared by microwave synthesis. The scanning electron microscopy (SEM) image and laser particle size analysis show that the CaCO3:Eu^3+ particles are needle-lik... A Eu^3+-doped CaCO3 phosphor with red emission was prepared by microwave synthesis. The scanning electron microscopy (SEM) image and laser particle size analysis show that the CaCO3:Eu^3+ particles are needle-like in the length range of 5.0-10.0 μm. The results of X-ray diffraction (XRD) analysis, Fourier transform infrared spectroscopy (FT-IR), and Raman spectroscopy indicate that pure aragonite CaCO3:Eu^3+ is prepared using microwave irradiation and the Eu^3+ ion as a luminescence center inhabits the site of Ca^2+. The photoluminescence excitation (PLE) spectrum shows that the strong broad band at around 270 nm and weak sharp lines in 300-550 nm are assigned to the charge transfer band of Eu^3+-O^2- and intra-configurational 4f-4f transitions of Eu^3+, respectively. The photoluminescence (PL) spectrum implies that the red luminescence can be attributed to the transitions from the ^5D0 excited level to the ^7FJ (J = 0, 1, 2, 3, 4) levels of Eu^3+ ions with the mainly electric dipole transition ^5D0 → ^7F2 (614 and 620 nm), and the Eu^3+ ions prefer to occupy the low symmetric site in the crystal lattice. 展开更多
关键词 PHOSPHORS calcium carbonate Eu^3+-doped microwave synthesis PHOTOLUMINESCENCE
下载PDF
SrLaLiTeO_(6):Dy^(3+),Eu^(3+)荧光粉的制备及发光性能研究
10
作者 龚劲松 朱齐 +4 位作者 郑小州 夏鹏举 刘凯 徐慢 戴武斌 《武汉工程大学学报》 CAS 2024年第3期274-279,共6页
白光发光二极管(LED)的商业合成方案缺少红光成分,导致合成的白光色温较高、显色性差,因此开发性能优异的单相暖白光荧光粉成为白光LED领域研究的重要课题。以Dy^(3+)和Eu^(3+)为掺杂剂,SrLaLiTeO_(6)(SLLT)为基质,采用固相反应法制备了... 白光发光二极管(LED)的商业合成方案缺少红光成分,导致合成的白光色温较高、显色性差,因此开发性能优异的单相暖白光荧光粉成为白光LED领域研究的重要课题。以Dy^(3+)和Eu^(3+)为掺杂剂,SrLaLiTeO_(6)(SLLT)为基质,采用固相反应法制备了SrLaLiTeO6:Dy^(3+),Eu^(3+)无机荧光粉,并通过X射线衍射仪、荧光分光光度计和色度坐标分析荧光粉的晶体结构及光学性能。结果表明:Dy^(3+)和Eu^(3+)成功进入SLLT晶体,无杂质产生;SLLT:0.07Dy^(3+),yEu^(3+)荧光粉在351 nm激发下能够同时发射蓝、黄、红光,证明了Dy^(3+)和Eu^(3+)之间存在能量传递,弥补了单掺Dy^(3+)荧光粉缺乏红色发射的缺陷;Eu^(3+)离子最佳掺杂浓度为0.05,此时的色度坐标为(0.391 9,0.380 9),色温为3 733 K,接近暖白光区域。因此,SrLaLiTeO_(6):Dy^(3+),Eu^(3+)荧光粉是一种性能优异的暖白光LED荧光粉。 展开更多
关键词 荧光粉 发光性能 SrLaLiTeO_(6):Dy^(3+) Eu^(3+) 暖白光 固相反应
下载PDF
Tb^(3+)、Eu^(3+)离子共掺杂的MgAl_(2)O_(4)发光性能研究
11
作者 钱珂旭 史忠祥 王晶 《大连交通大学学报》 CAS 2024年第4期95-100,共6页
采用水热辅助固相法,以Al(NO_(3))_(3)·9H_(2)O和Mg(NO_(3))_(2)·6H_(2)O为原料,尿素为沉淀剂,制备了Tb^(3+)、Eu^(3+)共掺杂镁铝尖晶石荧光粉。用X射线衍射、扫描电子显微镜对所得产物的相结构和形貌予以表征,结合荧光激发... 采用水热辅助固相法,以Al(NO_(3))_(3)·9H_(2)O和Mg(NO_(3))_(2)·6H_(2)O为原料,尿素为沉淀剂,制备了Tb^(3+)、Eu^(3+)共掺杂镁铝尖晶石荧光粉。用X射线衍射、扫描电子显微镜对所得产物的相结构和形貌予以表征,结合荧光激发、发射光谱和CIE色度图分析了荧光粉的光致发光性能。结果表明:在一定浓度范围内,掺杂Tb3+和Eu^(3+)离子后基质MgAl_(2)O_(4)的晶体结构并未发生改变,而当引入沉淀剂后,获得了具有良好分散性的棒状颗粒,且Tb^(3+)与Eu^(3+)间的浓度变化对样品形貌的影响甚微。在此基础上,以377 nm近紫外光作为激发光源实现了可见光区由粉至红的多色可调谐发射。 展开更多
关键词 水热辅助固相法 MgAl_(2)O_(4) Tb^(3+)/Eu^(3+) 发光性能
下载PDF
NaCa_(2)Mg_(2)(VO_(4))_(3)∶Eu^(3+)颜色可调荧光粉的熔盐法合成及其发光性能研究
12
作者 陈金润 陈梦玉 +4 位作者 李子璇 李微 楚楚 曹秀哲 翟永清 《人工晶体学报》 北大核心 2024年第1期90-96,共7页
以廉价的NaCl为熔盐,采用熔盐法合成了NaCa_(2-x)Mg_(2)(VO_(4))_(3)∶xEu^(3+)(0≤x≤0.10)系列颜色可调荧光粉,系统研究了合成条件、Eu^(3+)掺杂对样品结构及发光性能的影响。结果表明,反应温度为800℃、反应时间为0.5 h、原料与熔盐... 以廉价的NaCl为熔盐,采用熔盐法合成了NaCa_(2-x)Mg_(2)(VO_(4))_(3)∶xEu^(3+)(0≤x≤0.10)系列颜色可调荧光粉,系统研究了合成条件、Eu^(3+)掺杂对样品结构及发光性能的影响。结果表明,反应温度为800℃、反应时间为0.5 h、原料与熔盐的质量比为1∶3是合成NaCa_(2)Mg_(2)(VO4)_(3)的适宜反应条件,所得样品为NaCa_(2)Mg_(2)(VO_(4))_(3)纯相,且结晶度高。样品微观形貌随着反应温度的升高由珊瑚状演变为表面光滑的不规则多面体。Eu^(3+)掺杂对NaCa_(2)Mg_(2)(VO_(4))_(3)的晶体结构影响较小,但对其发光性能影响较大。随着Eu^(3+)浓度(x)的增加,VO_(4)^(3-)的特征发射带强度逐渐减弱;而Eu^(3+)的特征发射峰强度先增大后减小,当x=0.06时,达到最大。故通过改变Eu^(3+)浓度,可对样品的发光颜色进行调制,从绿色可调制为黄绿色、黄色、黄白色、橙红色。荧光光谱与荧光寿命分析表明,NaCa_(2)Mg_(2)(VO_(4))_(3)∶Eu^(3+)体系中存在VO43-到Eu^(3+)的能量转移过程,能量转移效率约为23%;热稳定性分析结果表明,当温度从室温(298.15 K)升高到398.15 K时,NaCa_(1.94)Mg_(2)(VO_(4))_(3)∶0.06Eu^(3+)荧光粉在614 nm处的主发射峰强度可保留起始值的68.4%,表现出良好的热稳定性。 展开更多
关键词 钒酸盐 熔盐法 发光性能 白光LED 颜色可调荧光粉 铕离子掺杂
下载PDF
红色超敏LaAlO_(3)∶Eu^(3+)纳米荧光粉的X射线激发光谱及其CIE色度特性
13
作者 伏振兴 《宁夏师范学院学报》 2024年第4期47-54,共8页
采用溶液燃烧合成法制备新型红色超敏La AOl_(3)∶Eu^(3+)纳米荧光粉,合成的La AOl_(3)∶Eu^(3+)材料具备纯R3c(No.167)结构.采用光谱学方法,研究La AOl_(3)∶Eu^(3+)纳米荧光粉的X射线激发光谱性质.结果显示,在X射线激发下,La AOl_(3)... 采用溶液燃烧合成法制备新型红色超敏La AOl_(3)∶Eu^(3+)纳米荧光粉,合成的La AOl_(3)∶Eu^(3+)材料具备纯R3c(No.167)结构.采用光谱学方法,研究La AOl_(3)∶Eu^(3+)纳米荧光粉的X射线激发光谱性质.结果显示,在X射线激发下,La AOl_(3)∶Eu^(3+)纳米荧光粉发射出很强的红色荧光,谱带中心波长位于620nm处,发光的淬灭浓度是6.0mol%.CIE色度研究表明,样品具有优良的红色荧光发射特性且浓度效应对色调和色纯度影响较小.说明合成的荧光粉可作为高效闪烁体,在超紫外LEDs和辐射探测等领域有重要的应用价值. 展开更多
关键词 纳米荧光粉 LaAlO_(3)∶Eu^(3+) 溶液燃烧合成法 X射线激发发光
下载PDF
Interpretation of the 4f-5d Excitation Spectra of Eu^(3+) and Tb^(3+) Doped in Crystals 被引量:8
14
作者 夏上达 陈涛 段昌奎 《Journal of Rare Earths》 SCIE EI CAS CSCD 2006年第4期400-407,共8页
The structure of the low-temperature 4f^N→4f^N-15d excitation spectra of Eu^3+ and Tb^3+ doped in crystals LiYF4, YPO4 and CaF2 measured by van Pieterson et al. in 2002 was analyzed and assigned based on the simple... The structure of the low-temperature 4f^N→4f^N-15d excitation spectra of Eu^3+ and Tb^3+ doped in crystals LiYF4, YPO4 and CaF2 measured by van Pieterson et al. in 2002 was analyzed and assigned based on the simple model proposed by Duan and co-workers in the last few years. Some complemental discussion on effects of J-mixing on the f-d transition intensities for Eu^3+ due to the f-electron crystal-field interaction Hcf(f), which was ignored in the simple mod- el, was presented. Some previously unexplained peaks for Tb^3 + were interpreted to be spin-forbidden transitions to higher 5d crystal-field levels, or assigned to be f→d excitations with the core 4f7 excited from ^8S to ^6P, ^6I and ^6D, respectively. It is shown that the main structure of 4f-Sd excitation spectra of Eu^3+ and Tb^3+ can be well interpreted with the simple model. 展开更多
关键词 f-d transition the simple model energy levels transition intensities Eu^3 Tb^3 rare earths
下载PDF
Structure and Luminescence Properties of Eu^(3+) Doped SiO_2 Glass Synthesized by Sol-Gel Process 被引量:2
15
作者 王喜贵 吴红英 +2 位作者 谢大弢 翁诗甫 吴瑾光 《Journal of Rare Earths》 SCIE EI CAS CSCD 2002年第3期172-176,共5页
Under different annealing temperatures, Eu 3+ doped SiO 2 gel and glass were prepared by sol gel method, and the structure and luminescent properties were studied with excitation spectra, emission spectra, IR ... Under different annealing temperatures, Eu 3+ doped SiO 2 gel and glass were prepared by sol gel method, and the structure and luminescent properties were studied with excitation spectra, emission spectra, IR and DTA TG. The results show that the fluorescent intensity tends to get stable when concentration of Eu 3+ doped is above 1 86 % (mass fraction) most water absorbed by the gel was removed at 300 ℃, and that the emission spectrum of Eu 3+ , with peaks at 614, 588, 577 nm, is due to 5D 0→ 7F 2, 5D 0→ 7F 1, 5D 0→ 7F 0 transitions, and the excitation peaks at 318, 362, 380, 393, 412 and 462 nm were observed. These results illustrate that the temperature range of 300~500 ℃ is critical for the structure conversion from gel to glass, and the fluorescence is strongly quenched by water. 展开更多
关键词 rare earths sol gel method Eu 3+ doped silica glass
下载PDF
Defect engineering on BiFeO_(3) through Na and V codoping for aqueous Na-ion capacitors
16
作者 Wenyun Wang Chao Yang +4 位作者 Shangjing Yu Daotong Han Wentao Qi Rui Ling Guangqiang Liu 《Journal of Energy Chemistry》 SCIE EI CAS CSCD 2024年第3期453-463,I0011,共12页
Sodium with low cost and high abundance is considered as a substitute element of lithium for batteries and supercapacitors,which need the appropriate host materials to accommodate the relatively large Na^(+) ions.Comp... Sodium with low cost and high abundance is considered as a substitute element of lithium for batteries and supercapacitors,which need the appropriate host materials to accommodate the relatively large Na^(+) ions.Compared to Li^(+) storage,Na^(+) storage makes higher demands on the structural optimization of perovskite bismuth ferrite(BiFeO_(3)).We propose a novel strategy of defect engineering on BiFeO_(3) through Na and V codoping for high-efficiency Na^(+) storage,to reveal the roles of oxygen vacancies and V ions played in the enhanced electrochemical energy storage performances of Na-ion capacitors.The formation of the oxygen vacancies in the Na and V codoped BiFeO_(3)(denoted as NV-BFO),is promoted by Na doping and suppressed by V doping,which can be demonstrated by XPS and EPR spectra.By the first-principles calculations,the oxygen vacancies and V ions in NV-BFO are confirmed to substantially lower the Na^(+)migration energy barriers through the space and electric field effects,to effectively promote the Na^(+) transport in the crystals.Electrochemical kinetic analysis of the NV-BFO//NV-BFO capacitors indicates the dominant capacitive-controlled capacity,which depends on fast Na^(+) deintercalation-intercalation process in the NV-BFO electrode.The NV-BFO//NV-BFO capacitors open up a new avenue for developing highperformance Na-ion capacitors. 展开更多
关键词 BiFeO_(3) Na^(+) storage V doping Oxygen vacancy CAPACITOR
下载PDF
Effects of Heat-treatment Temperature on Eu^(3+) and Li^+ Co-doped ZnO Photoluminescence by Sol-gel Process 被引量:1
17
作者 卢忠远 HE +5 位作者 Fangfang 许丕池 TENG Yuancheng WANG Bing 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2008年第1期20-23,共4页
The photoluminescence (PL) characteristics of Eu^3+ and Li^+ co-doped ZnO PL materials against heat-treatment temperature were discussed. The PL xerogel and powder samples were prepared by solgel process. The emis... The photoluminescence (PL) characteristics of Eu^3+ and Li^+ co-doped ZnO PL materials against heat-treatment temperature were discussed. The PL xerogel and powder samples were prepared by solgel process. The emission spectra of all samples showed two broad bands peaking at 590 nm and 620 nm under UV-Vis excitation. But the relative intensity of red PL (620 nm) was much greater than that of green PL (590 nm) of the same sample, that s to say, the red color was the main luminescence. With heat-treatment temperature increase, the two kinds of colors PL intensity decreased, and both the red and green PL intensity of the xerogel samples was much greater than those of powder samples respectively. The XRD patterns revealed that Eu^3+ ions were successfully incorporated in ZnO crystals in xerogel samples. When heat-treatment temperature reached 350 ℃, the Eu^3+ began to separate out of the ZnO crystals and Eu2O3 crystals came into being. When the powder sample was subjected to UV-Vis excitation, the energy transfered from the host ZnO emission to Eu^3+ became weaker than the xerogel sample. 展开更多
关键词 PHOTOLUMINESCENCE Eu^3 and Li^+ co-doped ZnO UV-Vis excitation xerogel powder
下载PDF
Luminescence properties of YAl_3(BO_3)_4 phosphors doped with Eu^(3+) ions 被引量:2
18
作者 李桂芳 曹全喜 +1 位作者 李智敏 黄云霞 《Journal of Rare Earths》 SCIE EI CAS CSCD 2008年第6期792-794,共3页
YAl3 (BO3)4: Eu^3+ phosphors were prepared by the conventional solid state reaction. The phase structure and morphology were investigated by X-ray diffraction (XRD) and scanning electron microscope (SEM). Dopi... YAl3 (BO3)4: Eu^3+ phosphors were prepared by the conventional solid state reaction. The phase structure and morphology were investigated by X-ray diffraction (XRD) and scanning electron microscope (SEM). Doping YAl3(BO3)4: Eu^3+ phosphors with concentration of Eu^3+ ions of 0, 2, 5, 8 and 10 mol% were studied and their luminescent properties at room temperature were discussed. The excitation spectrum of Y0.95Eu0.05Al3(BO3)4 was composed of a broad band centered at about 252 nm and a group of lines in the longer wavelength region. In the emission spectra, the peak wavelength was about 614 nm under a 252 nm UV excitation. The optimal doping concentration of Eu^3+ ions in YAl3(BO3)4: Eu^3+ phosphors was 8 mol%. 展开更多
关键词 YAl3(BO3)4:Eu^3 solid state reaction LUMINESCENCE PHOSPHORS rare earths
下载PDF
Effect of Eu^3+-doping on morphology and fluorescent properties of neodymium vanadate nanorod-arrays 被引量:1
19
作者 Li TIAN Shan-min CHEN +4 位作者 Qiang LIU Jie-ling WU Rui-ni ZHAO Shan LI Li-juan CHEN 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2020年第4期1031-1037,共7页
Tetragonal structural(t-NdVO4)nanorod-arrays were fabricated by simple one-pot hydrothermal method.The phase,morphology and microstructure of NdVO4 were characterized by X-ray diffractometer,scanning electron microsco... Tetragonal structural(t-NdVO4)nanorod-arrays were fabricated by simple one-pot hydrothermal method.The phase,morphology and microstructure of NdVO4 were characterized by X-ray diffractometer,scanning electron microscope(SEM),transmission electron microscope(TEM),dispersive X-ray spectrometer(EDS)and selected area electron diffraction(SAED)techniques.t-NdVO4 nanorods are single-crystalline with a length of 100 nm and a diameter of 25 nm,which grow orientally along the direction of(112)crystalline plane and self-assemble to form nanorod-arrays.The results show that Eu^3+-doping interrupts the formation of NdVO4 nanorod-arrays,and then leads to the red-shift of the strongest luminescence emission of Nd3+transition from 4D3/2 state to 4I11/2 and decreases its intensity of the fluorescence emission at 400 nm sharply.The research results have some reference values to optimize the photoluminescence performance of rare earth vanadates. 展开更多
关键词 Eu^3+-doping MORPHOLOGY fluorescent properties neodymium vanadate nanorod-arrays hydrothermal method
下载PDF
Eu^(3+)掺杂Y_(2)MgTiO_(6)红色荧光粉的制备及发光性质研究
20
作者 蒋小康 高峰 周恒为 《人工晶体学报》 CAS 北大核心 2024年第7期1170-1176,共7页
采用溶胶-凝胶法制备出Y_(2-2 x)MgTiO_(6)∶2 x Eu^(3+)(YMT∶2 x Eu^(3+),0≤x≤0.11)新型红色荧光粉。通过X射线衍射仪(XRD)检测样品的纯度,结果显示YMT∶Eu^(3+)样品属于单斜晶系,空间群为P21/n,无其他杂相。扫描电子显微镜(SEM)照... 采用溶胶-凝胶法制备出Y_(2-2 x)MgTiO_(6)∶2 x Eu^(3+)(YMT∶2 x Eu^(3+),0≤x≤0.11)新型红色荧光粉。通过X射线衍射仪(XRD)检测样品的纯度,结果显示YMT∶Eu^(3+)样品属于单斜晶系,空间群为P21/n,无其他杂相。扫描电子显微镜(SEM)照片显示荧光粉为2μm的不规则颗粒。当激发波长为264 nm时,发射光谱出现四个尖锐的发射峰,分别位于591(^(5)D_(0)→^(7)F_(1))、619(^(5)D_(0)→^(7)F_(2))、657(^(5)D_(0)→^(7)F_(3))和693 nm(^(5)D_(0)→^(7)F_(4))。Eu^(3+)离子之间能量传递为电偶极子-电偶极子(d-d)相互作用。YMT∶0.14Eu^(3+)荧光粉的CIE色度坐标为(0.645,0.332),与红光标准色坐标(0.67,0.33)非常接近。变温PL光谱及热激活能计算结果显示荧光粉具有一定的热稳定性,因此YMT∶Eu^(3+)是一种具有潜在应用价值的LED红色荧光粉。 展开更多
关键词 Eu^(3+) 溶胶-凝胶法 Y_(2)MgTiO_(6) 红色荧光粉 热稳定性 LED
下载PDF
上一页 1 2 132 下一页 到第
使用帮助 返回顶部