Comparative microsporogenesis and flower development in Eucalyptus urophylla×E.grandis

Microsporogenesis and flower development in Eucalyptus urophylla × E. grandis were examined using chromosome tableting to provide a method to predict the meiotic stages in this species. Although microsporogenesis was normal, cytokinesis during meiosis of pollen mother cells occurred simultaneously, with strong asynchronism observed in the two different lengths of stamens in a flower bud. In a single flower, the developmental period of microsporogenesis in anthers on the longer stamens was always ahead of those on the shorter stamens. Flower development was also asynchronous at different locations on a branch. Flower buds on the upper side of the branch were larger in diameter than those on the lower side. In addition, a correlation was observed between microsporogenesis development and flower bud diameter growth. The pachy- tene stage was first observed when the diameter of the flower buds increased to 3.0 mm, and the majority of the meiotic stages were observed when bud diameters ranged from 3.5 to 5.0 mm. This study showed that the developmental stages of microsporogenesis in Eucalyptus urophylla × E. grandis could be distinguished readily, which may be applicable to future breeding studies.

Growth Process of Eucalyptus urophylla × E.grandis Stand Based on Logistic Equation

Eucalyptus is the most valuable cultivated forest genus in the tropical and subtropical areas nowadays. It has been a challenge for foresters to model growth due to the genetic variations, management regimes, and multiple products generated from the plantations. In this paper, Logistic equation was used to study the stock growth process of E. urophylla × E. grandis plantation at age of 14 with 6 spacing treatments. And the biological interpretation of the parameters of Logistic equation was analyzed. The results show that it is flexible, precise and accurate to fit the growth process.

Soil microorganisms alleviate the allelopathic effect of Eucalyptus grandis × E. urophylla leachates on Brassica chinensis

Soil microbes may be critical players in determining the allelopathic potential of some plants. Low levels of plant community biodiversity in Eucalyptus plantations have been attributed to the allelopathic potential of these tree species. The role of soil microbes in the allelopathic effect of leaf leachates of the hybrid tree Eucalyptus grandis x E. urophylla, was tested in Petri dish assays with Brassica chinensis as a receiver plant. Soils were collected from either a local garden (soil A) or a Eucalyptus plantation (soil B) and half of each soil was sterilized to remove microbes. These soils were then treated with E. grandis x E. urophylla leachates for 0-72 h. Seed germination of B. chinensis was significantly inhibited in soils treated with leaf leachates relative to untreated soils. The inhibitory effect of the leaf leachates was more pronounced in sterilized soils. Total phenolic content was obvious lower in nonsterile leachate-treated soils than in sterile soils. Biomass of B. chinensis was negatively correlated with the total phenolic content in soils. Our findings suggest that soil microbes can alleviate the allelopathic potential of Eucalyptus and thereby its negative impact on plant growth.

Density effect and self-thinning in Eucalyptus urophylla stands

Density effects on the growth and self-thinning of Eucalyptus urophylla stands were examined for 7 years.The reciprocal equation of the competition-density(C–D)effect was used to describe the C–D effect in even-aged pure stands of E. urophylla during course of self-thinning and showed a good fit to the data. The time trajectories of mean stem volume-density nearly paralleled the y-axis during early growth stages of stands, and then began to curve left. Finally, the mean stem volume-density trajectories of the low-, middle-and high-density stands tended to follow the self-thinning lines with slopes of-2.01,-1.90 and-1.99, respectively. With increasing physical time t, the biological time s increased rapidly during early growth stages and became slow gradually during later growth stages. Realized density-initial density curves tended to become more or less flat with increasing initial density, indicating the existence of an asymptotic value for density at a given time. The coefficient e, the reciprocal of which represents the asymptotic density at a given time,increased with increasing biological time s, indicating that the asymptotic density decreased with increasing stand age.Final yield Y(t) increased gradually with increasing stand age.

Axial variations in anatomical properties and basic density of Eucalypt urograndis hybrid(Eucalyptus grandis × E. urophylla)clones

We studied two clones of Eucalypt urograndis hybrid （Eucalyptus grandis × E. urophylla）, GR283 and GR330, grown in Tumkur district of Kamataka （India）, and felled 5-6 years old three trees of each clone. We recorded axial variations in heartwood content, bark properties, wood density and anatomical characteristics of wood in- cluding fibre length, fibre diameter, fibre wall thickness, lumen diameter, vessel frequency, vessel diameter and vessel element length. Clone GR283 had about 10 % heartwood, significantly lower than for clone GR330 （37 %）. Basic wood density along the tree height varied significantly within and between the clones. We observed significant variations in fibre length, fibre diameter and wall thickness within and between the two clones. Vessel frequency and vessel element length did not vary but vessel diameter differed significantly between the clones. With a greater proportion of sapwood, clone GR283 can be uti- lized for paper and pulp applications. Clone GR330 had a higher proportion of heartwood and lower wood density and, hence, is more suitable for light-weight material applications.

Impact of Natural Selection on Lignin and Cellulose Candidate Genes in a Natural Population of <i>Eucalyptus urophylla</i>

Wood plays a major role in land ecosystems and in human activity. Better understanding the genetic basis and evolutionary implication of wood variability are thus key issues with both ecological and economical implications. The present paper addresses the question of the extending and the nature of natural selection on wood related genes in Eucalyptus urophylla, a tropical tree species with key economical importance. We conducted a genetic study on an E. urophylla population from Timor Island using a set of 17 SSR characterized on a main sample of 43 individuals and six candidate genes sequenced on a subset of 18 individuals. The candidate genes include three cellulose synthase genes (EuCesA1, EuCesA2 and EuCesA3), and three genes involved in lignin synthesis (EuCAD2, EuC4H1 and EuC4H2). Based on SSR data, the investigated population appeared to have no structure and have undergone past population expansion. Accounting for this demographic history, we were able to draw neutral expectation for polymorphism distribution on candidate genes and to determine their potential selective status. We hence identified two gene portions exhibiting unexpected polymorphism pattern, consistent with natural selection imprint.

Acacia mangium and Eucalyptus urophylla in Northern Vietnam： The Relationship between Silvicultural Activity and Quality of Stand

This paper sets out to determine the link between socio-economic attributes of smallholders, silvicultural activity and the stand quality of Acacia mangium and Eucalyptus urophylla plantations in two unrelated communes in Phu Tho province, Vietnam. The necessary data was collected by interviewing the smallholders and conducting inventory of the stands. The data was analyzed with descriptive statistics, Mann-Whitney tests and Spearman correlations. More silvicultural practices were conducted by A. mangium planters with larger areas. Most of the smallholders practiced the suggested silvicultural activities. Productivity was affected by pruning in medium quality sites. This research recommends that smallholders were supported with incentives for the plantation establishment, education for smallholders in silvicultural techniques, organization and development activities for the wider market.

Heterosis Estimation for Growth Traits and Wood Properties of Eucalyptus urophylla under Two Sites in Southern China

Heterosis is a quicker,cheaper and easier method for increasing plantation production,and heterosis studies can provide the basis for exploitation of valuable hybrid combinations in breeding programs.Growth traits,wood properties,and bark percentage were assessed for 6×6 full diallel progenies of E.urophylla in southern China measured at age 4 years.Analysis of variance showed that there were significant differences on all studied traits except dynamic modulus of elasticity among combinations.The mean diameter at breast height,wood basic density,and dynamic modulus of elasticity were 9.40 to 12.20 cm,0.45 to 0.47 g cm-3,and 5.04 to 5.72 GPa,respectively.The coefficients of variation ranged from 18.18%to 50.43%for growth traits,9.07%to 55.24%for wood properties and 22.26%to 23.93%for bark percentage.The heterosis estimation on diameter at breast height,wood basic density,and dynamic modulus of elasticity were-24.07%to 18.74%,-14.23%to 9.17%and-25.53%to 16.28%.U22×U56 generally had higher heterosis of growth traits and wood properties through three sites.Same combinations had different original and reciprocal heterosis estimation at two sites even on same traits.The combinations of same parents always had similar original and reciprocal heterosis estimation.

Leaf Area Calculation Model of E.urophylla and E.grandis×E.urophylla

[Objective] The aim was to build an optimal leaf area measurement model of E. urophylla and E. grandis×E.urophylla. [Method] The correlation between leaf area and leaf＇s eigenvalue of E. urophylla and E. grandis×E.urophylla were studied. [Result] There was certain difference in leaf characteristics values between the 2 species. The leaf areas of E. urophylla and E. grandis×E.urophylla both had significant correlation with leaf length,leaf width,leaf perimeter,leaf length × leaf width,the ratio of leaf length to leaf width,shape factor,etc.,so the factors could be constructed into a regression model with leaf area. Among them,the best 2 models for leaf area calculation which were built by leaf length × leaf width of E. urophylla and E. grandis×E.urophylla both had relatively high accuracy and practical applications. [Conclusion] The research provides a simple and effective leaf area measurement method for studies on the 2 tree species.

Note on Glycaspis brimblecombei Moore (Hemiptera Psyllidae): A new pest of Eucalyptus in Greece

Leaves of eucalyptus infested by Glycaspis brim-blecombei Moore were found on river red gum (E. camaldulensis) and blue gum (E. globulus) trees in Attiki and Chania region, Greece. The psyllid is recorded for the first time in Greece. Brief information about this psyllid is provided.

Monoterpene hydrocarbons,major components of the dried leaves essential oils of five species of the genus Eucalyptus from Cote d’Ivoire

The chemical composition of the essential oils obtained from the dried leaves of five species of the genus Eucalyptus (E. camaldulensis, E. de-glupta, E. grandis, E. torelliana, E. urophylla) growing in C?te d’Ivoire, was analyzed by means of GC and GC/MS. The density and the refractive index were measured. The major components of all these oils are: α-pinene, β-pinene, α-phellandrene, limonene, γ-terpinene, p-cymene and β-caryo-phyllene. The particularity of these oils is their monoterpene hydrocarbons major components.

Purification of AS-CMP effluent by combined photosynthetic bacteria and coagulation treatment

The effluent from the pulping of E. urophylla by alkali sodium sulfite chemi mechanical process(AS-CMP) was characterized for its biodegradability by photosynthetic bacteria (PSB). Chemical coagulation post treatment of biotreated wastewater was also studied. One month continuous treatment in the laboratory indicated that the COD Cr , BOD 5 and SS removals in biotreatment stages reached 56%, 83% and 89% respectively, and the CH 2Cl 2 extractives decreased from 10.7 mg/L to 7.7 mg/L. In chemical coagulation post treatment stage, the effects of process conditions, such as coagulant dosage, pH value and the coordinated coagulation flocculation treatment of three kinds of coagulants on coagulation effectiveness were discussed. The optimum operating conditions were given.

Effect of three tree species on UV weathering of wood flour-HDPE composites

Eucalyptus urophylla, Acacia mangium, and Pinus caribaea are the primary species for the wood industry in Vietnam. Wood residues of these species were used to reinforce high-density polyethylene(HDPE) composites. The flexural or bending property, impact strength and surface color were evaluated after exposure to accelerated ultraviolet weathering up to 2000 h. The weathered surface was characterized by scanning electron microscopy(SEM) and Fourier transform infrared(FTIR) spectroscopy. The results indicate that A. mangium/HDPE composites had the lowest color change and least fading,and remained stable after 1500 h exposure. FTIR spectroscopy showed that the oxidation of the composites increased in parallel with duration of exposure by assessing the concentration of carbonyl groups on the surfaces. SEM showed that all three species reinforced composites exhibited similar severe cracks after 1000 h;however, at the end of the weathering test, E. urophylla and P. caribaea composites were more severely cracked than A. mangium composites. A. mangium also had the highest flexural strength, impact strength and crystallinity duringweathering. A. mangium is the most preferable among the three species to reinforce HDPE.

Leaf water potential and gas exchange of eucalypt clonal seedlings to leaf solar protectant

This experiment was carried out in acclimatized greenhouses with seedlings of two hybrid clones of Eucalyptus urophylla×Eucalyptus grandis. A sunscreen protector consisting of 62.5% calcium carbonate was sprayed on the seedlings at weekly intervals. Water stress was induced by suspending irrigation until the soil reached 30% available water and water was then replaced so that it returned to field capacity. Gas exchange and leaf water status were measured after 50 days. The experiment was set up in a 4×2 factorial randomized block design in four distinct environments:(1) temperatures less than 21.2℃ and vapor pressure deficit of 0.15 kPa;(2) intermediate temperatures of 24.2℃ and vapor pressure deficit of 0.69 kPa;(3) high temperatures of 27.0℃ and high vapor pressure deficit of 1.4 kPa; and,(4) high temperature of 27.0℃ and vapor pressure deficit below 1.10 kPa. Two leaf sun protector treatments were used, with five replications each. High atmospheric demand acted as a stress factor for the seedlings during the initial growth phase.Applications of leaf sunscreen protector provided beneficial effects in maintaining optimum water status and gas exchanges of the plants under water stress.

Diversity of mycorrhizal fungi and soil indicative species in coastal plantations of northeast Brazil

The aim of this work was to evaluate arbuscular mycorrhizal(AM)fungi as soil indicators and the mycorrhization of native and exotic tree species planted in the Acaraúbasin,a transition area from the coast to the Brazilian semiarid region.Plots with 6-year-old trees of four native and three non-native species as well as one non-forested area were evaluated in terms of the diversity of AM fungi in the mycorrhizosphere and the root colonization by AM and ectomycorrhizal(EcM)fungi.Twenty-four AM fungi were identified;Claroideoglomus etunicatum,Glomus sinuosum,Paraglomus albidum,Acaulospora laevis,and Acaulospora brasiliensis were abundant in the forest soil.Diversity,dominance,evenness and richness indices of AM fungi were higher in plots with native trees.All root samples were colonized by AM fungi and only A nadenanthera colubrina,Acacia mangium,Casuarina equisetifolia and Eucalyptus urophylla formed associations with EcM fungi.Acaulospora morphotypes served as soil indicators for coverings with the native species Astronium fraxinifolium and Colubrina glandulosa.Exotic species may favor the proliferation of rarer AM fungi.These fungi–plant relationships may be important in the management of forest systems,and the evidence with mycorrhizal associations allows the inclusion of Brazilian species in tropical reforestation.

尾叶桉(Eucalyptus urophylla)杂种家系遗传测定及抗风选择

中国华南沿海地区台风影响频发,为选育桉树抗风和速生品种,本研究估算广东鹤山9年和11.5年生56个尾叶桉家系(含母本和对照)生长、抗风等性状的杂种优势、育种值及配合力。结果表明:两个不同年度各性状在杂种家系间存在极显著差异。以单株蓄积为指标筛选优良杂交组合,两个年度均排名前3的是37号和40号,分别是家系128号9年生平均0.207 9 m^3和11.5年生0.336 9 m^3的1.33和1.79倍以及1.28和1.52倍,11.5年生超过128号的家系共6个,6个家系平均超亲优势达到15.99%;两个年度单株蓄积育种值均超过0.05且抗风性育种值为正的仅4个家系;以11.5年生调查数据和最优56号家系为选择标准,超过其平均单株蓄积0.345 7 m^3和抗风等级值4.33的杂种单株有173株。本研究发现,2号、15号、21号、22号、和64号是具有较高母本一般配合力的亲本,而2号、21号、22号、29号和56号这5个父本的一般配合力较高,通过优化组合可获得具有优良性状的子代;生长结合抗风指标选择到的3个特殊配合力高的杂交家系和173株优株,是今后高世代育种重点利用对象,也可为台风区人工林建设提供更多资源产品。

尾叶桉(Eucalyptus urophylla)第一代育种群体的遗传多样性

本研究利用中性微卫星标记分析了尾叶桉第一代育种群体的遗传多样性水平和遗传结构。Hardy-Weinberg平衡检测表明尾叶桉第一代育种群体各天然种源内存在明显的杂合子缺失现象。标记和种源的遗传多样性参数统计都表明,尾叶桉育种群体各天然种源具有很高的遗传多样性。分子方差分析显示,尾叶桉育种群体的大部分遗传变异来自家系间,种源间的遗传变异分量很低,该结论被种源间很低的遗传分化水平再次佐证。尾叶桉育种群体内的亚群体分类（Structure分析）与各天然种源的地理分布不存在联系,但群体的内亚群体分类和基于Nei遗传距离的聚类比较吻合。本研究结论可为尾叶桉高世代的群体改良和优良杂交种亲本选配提供遗传基础信息。

Study on Machining Properties of Eucalyptus urophylla×E. grandis:I. Planing and Sanding Properties

The research method in this paper is based on the standard of American Society for Testing andMaterials (ASTM). Planing and sanding are selected to study the machining properties of E. urophylla × E.grandis plantation wood. Moreover, the reasons for machining defects are analyzed. The results show E.urophylla × E. grandis planted in south China is a good species with a great potential for solid woodutilization.

Influence of Planting Spacing on Mechanical Properties of Eucalyptus grandis × E. urophylla Planted in China

The objective of this study was to understand influence of planting spacing on mechanical properties of Eucalyptus grandis × E. urophylla planted as a potential species for solid wood products in China. Four trees at age of 13 were selected from each of 6 groups of planting spacing and a total of 24 sampling trees were selected from the Dongmen Forestry Center of Guangxi Province in China. Furthermore, a one-meter-long log from each tree was cut into small blocks for wood properties testing. MOE, MOR and compression strength parallel to wood grain were determined in accordance with Chinese standards. In addition, wood density and shrinkage properties were measured. Statistical analysis by SAS software indicated significant differences among the 6 groups of planting spacings on the air-dried density, radial shrinkage and bending MOR properties at the 0.05 level, and also on the compression strength at the 0.10 level. However, it was observed that there is no significant differences among shrinkages in tangential and volume, and MOE.

Study on Machining Properties of Eucalyptus urophylla× E.grandis:Ⅱ.Shaping,Boring,Mortising and Turning

The research method of this paper is based on the standards of American Society for Testing and Materials (ASTM). Four items that contain boring, mortising, shaping and turning are selected to study the machining properties of E. urophylla × E. grandis plantation wood. The reasons for machining defects are analyzed. The resultshows thatE. urophylla × E. grandis planted in South China isa good specieswith great potential for solid wood utilization.