The objective of this study was to prepare tamsulosin hydrochloride-sustained release(TSH-SR)pellets which showed good release stability with frame-controlled method.TSH was added to Eudragit~?NE30D and Eudragit~?L30D...The objective of this study was to prepare tamsulosin hydrochloride-sustained release(TSH-SR)pellets which showed good release stability with frame-controlled method.TSH was added to Eudragit~?NE30D and Eudragit~?L30D-55 polymers to form drug-loaded inner core.Afterwards,enteric Eudragit~?L30D-55 polymer was modified on the surface of it to the final product.Dissolution studies showed that TSH-SR pellets were more stable during the coating process,different curing temperatures and storage conditions compared with TSH pellets produced by film-controlled technique.Appearances and glass transition temperatures(Tgs)of free films and surface morphologies observed by scanning electron microscopy(SEM)of blank sustained release pellets prepared by different ratios of Eudragit~?NE30D and Eudragit~?L30D-55 further indicated that temperature and relative humidity(RH)were the key factors when Eudragit~?NE30D blended with Eudragit~?L30D-55 were applied to sustained/controlled release preparations.In addition,SEM identified the surface morphologies of TSH-SR pellets before and after dissolution,which showed intact surface structure and great correlation with release curve respectively.展开更多
文摘The objective of this study was to prepare tamsulosin hydrochloride-sustained release(TSH-SR)pellets which showed good release stability with frame-controlled method.TSH was added to Eudragit~?NE30D and Eudragit~?L30D-55 polymers to form drug-loaded inner core.Afterwards,enteric Eudragit~?L30D-55 polymer was modified on the surface of it to the final product.Dissolution studies showed that TSH-SR pellets were more stable during the coating process,different curing temperatures and storage conditions compared with TSH pellets produced by film-controlled technique.Appearances and glass transition temperatures(Tgs)of free films and surface morphologies observed by scanning electron microscopy(SEM)of blank sustained release pellets prepared by different ratios of Eudragit~?NE30D and Eudragit~?L30D-55 further indicated that temperature and relative humidity(RH)were the key factors when Eudragit~?NE30D blended with Eudragit~?L30D-55 were applied to sustained/controlled release preparations.In addition,SEM identified the surface morphologies of TSH-SR pellets before and after dissolution,which showed intact surface structure and great correlation with release curve respectively.
文摘目的制备肠溶性包衣膜,考察混合膜材以及添加剂对膜材性质的影响。方法采用平面铸膜法制备Eudragit NE30D/L 30D-55及Eudragit FS 30D/L 30D-55游离膜,并以膜的透湿性、机械性能为指标,考察膜材比例及添加剂[增塑剂柠檬酸三乙酯(TEC)、抗黏剂单硬脂酸甘油酯(GMS)、乳化剂吐温80(Tween-80)]对游离膜的影响。结果 Eudragit NE 30D及Eudragit FS 30D的加入能够增加Eudragit L 30D-55膜材的延展性、弹性和耐撞击负载的能力,同时也会减小膜材的强度、增加其透湿性。Eudragit L 30D-55与Eudragit NE 30D的混合膜材透湿性较大,对于湿度敏感性药物,应尽量避免选择透湿性大的包衣膜材。TEC和Tween-80的加入可改善膜材的柔韧性和弹性,降低膜材的强度,同时,TEC的加入可以增加膜材的透湿性,而GMS对膜材各项机械性质和透湿性影响不大。结论通过简单的调节混合膜材的种类、比例、添加剂的用量可以制得符合要求的肠溶游离膜。
