Efficient and reversible separation of NH_(3) by deep eutectic solvents with multiple active sites and low viscosities

The efficient separation and collection of ammonia(NH_(3))during NH_(3) synthesis process is essential to improve the economic efficiency and protect the environment.In this work,ethanolammonium hydrochloride(EtOHACl)and phenol(PhOH)were used to prepare a novel class of deep eutectic solvents(DESs)with multiple active sites and low viscosities.The NH_(3) separation performance of EtOHACl+PhOH DESs was analyzed completely.It is figured out that the NH_(3) absorption rates in EtOHACl+PhOH DESs are very fast.The NH_(3) absorption capacities are very high and reach up to 5.52 and 10.74 mol·kg1 at 11.2 and 100.4 kPa under 298.2 K,respectively.In addition,the EtOHACl+PhOH DESs present highly selective absorption of NH_(3) over N_(2) and H_(2) and good regenerative properties after seven cycles of absorption/desorption.The intrinsic separation mechanism of NH_(3) by EtOHACl+PhOH DESs was further revealed by spectroscopic analysis and quantum chemistry calculations.

Insight into the experiment and extraction mechanism for separating carbazole from anthracene oil with quaternary ammonium-based deep eutectic solvents

Carbazole is an irreplaceable basic organic chemical raw material and intermediate in industry.The separation of carbazole from anthracene oil by environmental benign solvents is important but still a challenge in chemical engineering.Deep eutectic solvents (DESs) as a sustainable green separation solvent have been proposed for the separation of carbazole from model anthracene oil.In this research,three quaternary ammonium-based DESs were prepared using ethylene glycol (EG) as hydrogen bond donor and tetrabutylammonium chloride (TBAC),tetrabutylammonium bromide or choline chloride as hydrogen bond acceptors.To explore their extraction performance of carbazole,the conductor-like screening model for real solvents (COSMO-RS) model was used to predict the activity coefficient at infinite dilution (γ^(∞)) of carbazole in DESs,and the result indicated TBAC:EG (1:2) had the stronger extraction ability for carbazole due to the higher capacity at infinite dilution (C^(∞)) value.Then,the separation performance of these three DESs was evaluated by experiments,and the experimental results were in good agreement with the COSMO-RS prediction results.The TBAC:EG (1:2) was determined as the most promising solvent.Additionally,the extraction conditions of TBAC:EG (1:2) were optimized,and the extraction efficiency,distribution coefficient and selectivity of carbazole could reach up to 85.74%,30.18 and 66.10%,respectively.Moreover,the TBAC:EG (1:2) could be recycled by using environmentally friendly water as antisolvent.In addition,the separation performance of TBAC:EG (1:2) was also evaluated by real crude anthracene,the carbazole was obtained with purity and yield of 85.32%,60.27%,respectively.Lastly,the extraction mechanism was elucidated byσ-profiles and interaction energy analysis.Theoretical calculation results showed that the main driving force for the extraction process was the hydrogen bonding ((N–H...Cl) and van der Waals interactions (C–H...O and C–H...π),which corresponding to the blue and green isosurfaces in IGMH analysis.This work presented a novel method for separating carbazole from crude anthracene oil,and will provide an important reference for the separation of other high value-added products from coal tar.

Machine-Learning-Assisted Design of Deep Eutectic Solvents Based on Uncovered Hydrogen Bond Patterns

Non-ionic deep eutectic solvents(DESs)are non-ionic designer solvents with various applications in catalysis,extraction,carbon capture,and pharmaceuticals.However,discovering new DES candidates is challenging due to a lack of efficient tools that accurately predict DES formation.The search for DES relies heavily on intuition or trial-and-error processes,leading to low success rates or missed opportunities.Recognizing that hydrogen bonds(HBs)play a central role in DES formation,we aim to identify HB features that distinguish DES from non-DES systems and use them to develop machine learning(ML)models to discover new DES systems.We first analyze the HB properties of 38 known DES and 111 known non-DES systems using their molecular dynamics(MD)simulation trajectories.The analysis reveals that DES systems have two unique features compared to non-DES systems:The DESs have①more imbalance between the numbers of the two intra-component HBs and②more and stronger inter-component HBs.Based on these results,we develop 30 ML models using ten algorithms and three types of HB-based descriptors.The model performance is first benchmarked using the average and minimal receiver operating characteristic(ROC)-area under the curve(AUC)values.We also analyze the importance of individual features in the models,and the results are consistent with the simulation-based statistical analysis.Finally,we validate the models using the experimental data of 34 systems.The extra trees forest model outperforms the other models in the validation,with an ROC-AUC of 0.88.Our work illustrates the importance of HBs in DES formation and shows the potential of ML in discovering new DESs.

Sodium Nitrate/Formamide Deep Eutectic Solvent as Flame-Retardant and Anticorrosive Electrolyte Enabling 2.6 V Safe Supercapacitors with Long Cyclic Stability

Safe operation of electrochemical capacitors(supercapacitors)is hindered by the flammability of commercial organic electrolytes.Non-flammable Water-in-Salt(WIS)electrolytes are promising alternatives;however,they are plagued by the limited operation voltage window(typically≤2.3 V)and inherent corrosion of current collectors.Herein,a novel deep eutectic solvent(DES)-based electrolyte which uses formamide(FMD)as hydrogen-bond donor and sodium nitrate(NaNO_(3))as hydrogen-bond acceptor is demonstrated.The electrolyte exhibits the wide electrochemical stability window(3.14 V),high electrical conductivity(14.01 mScm^(-1)),good flame-retardance,anticorrosive property,and ultralow cost(7%of the commercial electrolyte and 2%of WIS).Raman spectroscopy and Density Functional Theory calculations reveal that the hydrogen bonds between the FMD molecules and NO_(3)^(-)ions are primarily responsible for the superior stability and conductivity.The developed NaNO_(3)/FMD-based coin cell supercapacitor is among the best-performing state-of-art DES and WIS devices,evidenced by the high voltage window(2.6 V),outstanding energy and power densities(22.77 Wh kg^(-1)at 630 W kg^(-1)and 17.37 kW kg^(-1)at 12.55 Wh kg^(-1)),ultralong cyclic stability(86%after 30000 cycles),and negligible current collector corrosion.The NaNO_(3)/FMD industry adoption potential is demonstrated by fabricating 100 F pouch cell supercapacitors using commercial aluminum current collectors.

Oxidative Desulfurization of Fuel Oil with H_(3)PO_(4)-based Deep Eutectic Solvents

A series of Lewis-acid deep eutectic solvents (DESs) were synthesized by stirring phosphoric acid and zincchloride as raw materials at 80℃ to form H_(3)PO_(4)/nZnCl_(2) (n = 0.1, 0.25, 0.5, 0.75, 1). The DESs were characterized byFourier transform infrared spectrophotometry (FT-IR), thermogravimetry/differential thermogravimetry (TG/DTG), andelectron spray ionization mass spectrometry (ESI-MS). The DESs were used as both extractants and catalysts to removedibenzothiophene from fuels via oxidative desulfurization (ODS). Experiments were performed to investigated the influenceof factors such as composition of DES, temperature, oxidant dosage (molar ratio of O:S), DES dosage (volume ratio ofDES:oil), and number of cycles on desulfurization rate. The results indicated that the removal rate of dibenzothiophene (DBT)was affected by the Lewis acidic DESs, with that of H_(3)PO_(4)/0.25∙ZnCl_(2) reaching 96.4% under optimal conditions (Voil=5 mL,VDES=1 mL, an oxidant dosage of 6, T=50 ℃). After six cycles, the desulfurization rate of H_(3)PO_(4)/0.25∙ZnCl_(2) remained above94.1%. The apparent activation energy of dibenzothiophene (DBT) removal reaction was determined by a pseudo-first orderkinetic equation according to the Arrhenius equation to be 32.34 kJ/mol, as estimated. A reaction mechanism is proposedbased on the experimental data and characterization results.

Study on the green extraction of corncob xylan by deep eutectic solvent

Corn as one of the world's major food crops,its by-product corn cob is also rich in resources.However,the unreasonable utilization of corn cob often causes the environmental pollution,waste of resources and other problems.As one of the most abundant polymers in nature,xylan is widely used in food,medicine,materials and other fields.Corn cob is rich in xylan,which is an ideal raw material for extracting xylan.However,the intractable lignin is covalently linked to xylan,which increases the difficulty of xylan extraction.It has been reported that the deep eutectic solvent(DES)could preferentially dissolve lignin in biomass,thereby dissolving the xylan.Then,the xylan in the extract was separated by ethanol precipitation method.The xylan precipitate was obtained after centrifugation,while the supernatant was retained.The components of the supernatant after ethanol precipitation were separated by the rotary evaporator.The ethanol,water and DES were collected for the subsequent extraction of corn cob xylan.In this study,a novel way was provided for the green production of corn cob xylan.The DES was used to extract xylan from corn cob which was used as the raw material.The effects of solid-liquid ratio,reaction time,reaction temperature and water content of DES on the extraction rate of corn cob xylan were investigated by the single factor test.Furthermore,the orthogonal test was designed to optimize the xylan extraction process.The structure of corn cob xylan was analyzed and verified.The results showed that the optimum extraction conditions of corn cob xylan were as follows:the ratio of corn cob to DES was 1:15(g:mL),the extraction time was 3 h,the extraction temperature was 60℃,and the water content of DES was 70%.Under these conditions,the extraction rate of xylan was 16.46%.The extracted corn cob xylan was distinctive triple helix of polysaccharide,which was similar to the structure of commercially available xylan.Xylan was effectively and workably extracted from corn cob by the DES method.This study provided a new approach for high value conversion of corn cob and the clean production of xylan.

Research Progress of Deep Eutectic Solvents in Extraction of Plant Flavonoids

As a new type of green solvents,deep eutectic solvents(DESs)have the advantages of strong extraction ability,designability,simple preparation,low price,recoverability and biodegradation,and show great application potential in the field of plant flavonoid extraction.In this paper,the definition,classification and preparation methods of DESs were introduced.The effects of DES composition,molar ratio of DES components,water content of DES systems,liquid-material ratio,extraction temperature,extraction time and extraction auxiliary techniques on the extraction yield of plant flavonoids were expounded.The recycling methods of DESs were summarized.Existing problems of DESs in the field of plant flavonoids extraction were pointed out,and further research direction and trend were analyzed and prospected.

Stoichiometry and Stability Constant Values for Copper (II) Chelates with Ethylene Diamine in Deep Eutectic Solvents (DES) (Ethaline) Solutions

In this study we used the deep eutectic solvents (ionic liquids) to investigate the reaction between copper (II) with ethylene diamine (en). Two of the existing methods for analyzing spectrophotometric measurements have been applied for establishing, the stoichiometry and whenever possible, the stability constants of the chelates formed. The method of continuous variations was necessary to determine first whether, the metal ion and the ligand ethylene diamine form one or more than one chelate, when more than one chelate formed, the results obtained depend on the wavelength and for meaningful conclusions the wavelengths were carefully selected. The empirical formulae of the chelates were further substantiated by the molar ratio method. The effect of time and temperature on the formation and stability of these chelates in solution is also studied. The stability constants, K1 and K2 for the copper (II) chelates were calculated, though reliable, and are comparable to literature values.

An overview of deep eutectic solvents:Alternative for organic electrolytes,aqueous systems&ionic liquids for electrochemical energy storage

As the demand for sustainable energy sources continues to rise,the need for efficient and reliable energy storage systems becomes crucial.In order to effectively store and distribute renewable energy,new and innovative solutions must be explored.This review examines the deep eutectic solvents(DESs)as a green,safe,and affordable solution for the electrochemical energy storage and conversion field,offering tremendous opportunities and a promising future.DESs are a class of environment-friendly solvents known for their low toxicity and unique properties,such as their good conductivity,high thermal stability,and nonflammability.This review explores the fundamentals,preparations,and various interactions that often predominate in the formation of DESs,the properties of DESs,and how DESs are better than traditional solvents involving cost-ineffective and unsafe organic electrolytes and ionic liquids as well as inefficient aqueous systems due to low energy density for electrochemical energy storage applications.Then,a particular focus is placed on the various electrochemical applications of DESs,including their role in the electrolytes in batteries/supercapacitors,electropolishing and electrodeposition of metals,synthesis of electrode materials,recycling of electrodes,and their potential for use in CO_(2)capture.The review concludes by exploring the challenges,research gaps,and future potential of DESs in electrochemical applications,providing a comprehensive overview,and highlighting key considerations for their design and use.

Liquid–liquid extraction of levulinic acid from aqueous solutions using hydrophobic tri-n-octylamine/alcohol-based deep eutectic solvent

Levulinic acid(LA)is one of the top-12 most promising biomass-based platform chemicals,which has a wide range of applications in a variety of fields.However,separation and purification of LA from aqueous solution or actual hydrolysate continues to be a challenge.Among various downstream separation technologies,liquid-liquid extraction is a low-cost,effective,and simple process to separate LA.The key breakthrough lies in the development of extractants with high extraction efficiency,good hydrophobicity,and low cost.In this work,three hydrophobic deep eutectic solvents(DESs)based on tri-n-octylamine(TOA)as hydrogen bond acceptor(HBA)and alcohols(butanol,2-octanol,and menthol)as hydrogen bond donors(HBDs)were developed to extract LA from aqueous solution.The molar ratios of HBD and HBA,extraction temperature,contact time,solution pH,and initial LA concentration,DES/water volume ratios were systematically investigated.Compared with 2-octanol-TOA and menthol-TOA DES,the butanol-TOA DES exhibited the superior extraction performance for LA,with a maximum extraction efficiency of 95.79±1.4%.Moreover,the solution pH had a great impact on the LA extraction efficiency of butanol-TOA(molar ratio=3:1).It is worth noting that the extraction equilibrium time was less than 0.5 h.More importantly,the butanol-TOA(3:1)DES possesses good extraction abilities for low,medium,and high concentrations of LA.

Efficient and selective extraction of sinomenine by deep eutectic solvents

Sinomenine is the main bio-active ingredient of Sinomenii Caulis and usually produced by solventextraction techniques. However, the extraction of sinomenine suffers from the lack of highly efficient and environmentally-benign solvents. In this work, deep eutectic solvents(DESs) based on fragrances were synthesized, hydrogen-bond donors(HBDs) and hydrogen-bond acceptors(HBAs) components of DESs were identified and their extraction ability for sinomenine was evaluated and the extraction conditions were optimized by single-factor and orthogonal design experiments. It was found that the hydrogen-bonding interaction between sinomenine and DESs was the main extraction driving force and there was no explicit relationship between the extraction ability and the hydrophobicity of the DESs. The DESs could be recycled and sinomenine could be recovered quantitatively via backextraction. High-purity sinomenine((95.0 ± 2.3)%) could be produced. These findings suggest that DESs are highly-effective solvents for the isolation of sinomenine and exhibit great potential for the extraction of other bio-active compounds.

Enhancing effect of choline chloride-based deep eutectic solvents with polyols on the aqueous solubility of curcumin–insight from experiment and theoretical calculation

The development of green solvents for enhancing aqueous solubility of drug curcumin remains a challenge. This study explores the enhancing effect of deep eutectic solvents(DESs) on the aqueous solubility of curcumin(CUR) via experiment and theoretical calculation. Choline chloride-based DESs with polyols 1,2-propanediol(1,2-PDO), 1,3-propanediol, ethylene glycol, and glycerol as hydrogen bond donors were prepared and used as co-solvents. The CUR aqueous solubility increased with increasing the DESs content at temperature of 303.15-318.15 K, especially in aqueous ChCl/1,2-PDO(mole ratio 1:4) solutions. The positive apparent molar volume values and reduced density gradient analysis confirmed the existence of strong interactions between CUR and solvent. The van der Waals interactions and hydrogen bonding coexisted in DESs monomer retained the stability of DESs structure after introducing CUR. Moreover,the lower interaction energy of DESs…CUR system than that of the counterpart DESs further proved the strong interaction between CUR and DESs. The lowest interaction energy of ChCl/1,2-PDO…CUR system indicated that this system was the most stable and ChCl/1,2-PDO was promising for CUR dissolution.This work provides efficient solvents for utilizing curcumin, contributing to a deep insight into the interactions between DES and CUR at the molecular level, and the role of DESs on enhancing drugs solubility.

Volumetric and ultrasonic properties of thiamine hydrochloride drug in aqueous solutions of choline-based deep eutectic solvents at different temperatures

Important efforts have been made over the past years to improve the drug acts,which leads to the discovery of novel drug preparations and delivery systems.The optimal design of such processes requires a molecular-level understanding of the interactions between drug molecules and biological membranes.The thermodynamic investigation provides deep and complete knowledge of interactions and the choice of appropriate and suitable production compounds in pharmaceutical fields.Particularly,the analysis of drugs+co-solvents in aqueous media is the central issue in many types of research because they exert their impact by interacting with biological membranes.This work is aimed to measure the density and speed of sound for the thiamine hydrochloride in water+deep eutectic solvents(DESs)mixtures(choline chloride/urea,choline chloride/ethylene glycol and choline chloride/glycerol)at temperature range(293.15-308.15)K.By correlation of the evaluated parameters in some standard relations,the partial molar parameters i.e.apparent molar volumes,Vφ,m,and apparent molar isentropic compression,κ_(s,φ,m),are calculated.In addition,apparent molar isobaric expansion,E^(0)_(φ,m),and Hepler’s constant are computed from the density and speed of sound data.For fitting the experimental Vφ,m andκ_(s,φ,m)the Redlich-Meyer equation was employed that the important quantities;standard partial molar volume,V^(0)_(m),and partial molar isentropic compression,κφ,m0,were obtained.The thermodynamic analysis of the studied system also plays a crucial role in the pharmaceutical industry.

Intermolecular interactions induced property improvement for clean fracturing fluid by deep eutectic solvents

Fracturing fluid property play a critical role in developing unconventional reservoirs.Deep eutectic solvents(DESs)show fascinating potential for property improvement of clean fracturing fluids(CFFs)due to their low-price,low-toxicity,chemical stability and flexible designability.In this work,DESs were synthesized by mixing hydrogen bond acceptors(HBAs)and a given hydrogen bond donor(HBD)to explore their underlying influence on CFF properties based on the intermolecular interactions.The hydrogen-bonding,van der Waals and electrostatic interactions between DES components and surfactants improved the CFF properties by promoting the arrangement of surfactants at interface and enhancing the micelle network strength.The HBD enhanced the resistance of CFF for Ca^(2+) due to coordination-bonding interaction.The DESs composed of choline chloride(ChCl)and malonic acid show great enhancement for surface,rheology,temperature resistance,salt tolerance,drag reduction,and gel-breaking performance of CFFs.The DESs also improved the gel-breaking CFF-oil interactions,increasing the imbibition efficiencies to 44.2%in 74 h.Adjusting HBAs can effectively strengthen the intermolecular interactions(e.g.,HBA-surfactant and HBD-surfactant interactions)to improve CFF properties.The DESs developed in this study provide a novel strategy to intensify CFF properties.

Deep eutectic solvent-induced synthesis of Ni-Fe catalyst with excellent mass activity and stability for water oxidation

Ni-Fe bimetallic electrodes are currently recognized as a kind of benchmark transition metal-based oxygen evolution reaction(OER)electrocatalysts.Facile synthesis of Ni-Fe bimetallic electrode materials with excellent catalytic activity and satisfied stability by a simple and low-cost route is still a big challenge.Herein,well-defined Ni-Fe nanoparticles in-situ developed on a planar Fe substrate(Ni-Fe NPs/Fe)is fabricated via a facile one-step galvanic replacement reaction(GRR)carried out in an Ethaline-based deep eutectic solvent(DES).The prepared Ni-Fe NPs/Fe exhibits outstanding OER performance,which needs an overpotential of only 319 mV to drive a current density of 10 mA cm^(-2),with a small Tafel slope of 41.2 mV dec^(-1) in 1.0 mol L^(-1) KOH,high mass activity(up to 319.78 A g^(-1) at an overpotential of 300 mV)and robust durability for 200 h.Impressively,the Ni-Fe bimetallic oxygen-evolution electrode obtained from the Ethaline-based DES is catalytically more active and durable than that of its counterpart derived from the 4.2 mol L^(-1) NaCl aqueous solution.The reason for this is mainly related to the different morphology and surface state of the Ni-Fe catalysts obtained from these different solvent environments,particularly for the differences in phy-chemical properties,active species formed and deposition kinetics,offered by the Ethaline-based DES.

Selective recovery of zinc from zinc oxide dust using choline chloride based deep eutectic solvents

Deep eutectic solvents(DESs) are a kind of potential lixiviant for selective metal processing due to their versatile complexation properties. In this study, we investigated the recovery of zinc from zinc oxide dust using choline chloride-ureaethylene glycol(ChCl-urea-EG) DESs. The zinc extraction efficiency can be up to 85.2% when the slurry concentration is 50 g/L, leaching temperature is 80 °C and stirring speed is 600 r/min. The leaching process is controlled by the diffusion and the corresponding activation energy is 32.1 k J/mol. The resultant solution was directly used for the electrodeposition of zinc. The pure zinc deposit is obtained with a current efficiency of 82.6%. Furthermore, the ChCl-urea-EG DESs can be recycled. This approach is shown to be promising for the recycling of zinc from the zinc-containing dust.

Overview of acidic deep eutectic solvents on synthesis,properties and applications

This review divides the acidic deep eutectic solvents(ADES) into Br?nsted and Lewis DES according to their diversity of acidic character.The hydrogen bond donors and halide salts for formulating an ADES are classified, the synthesis methods are described, and the physicochemical properties including freezing point, acidity, density, viscosity and conductivity are presented. Furthermore, the applications of Br?nsted acidic deep eutectic solvents(BADES) and Lewis acidic deep eutectic solvents(LADES) are overviewed, respectively, covering the fields in dissolution, extraction, organic reaction and metal electrodeposition. It is expected that the ADES has great potential to replace the pollutional mineral acid, expensive and unstable solid acid, and costly ionic liquid in many acid-employed chemical processes, thus meeting the demands of green chemistry.

Catalytic oxidative desulfurization of fuels in acidic deep eutectic solvents with [(C_6H_(13))_3P(C_(14)H_(29))]_3PMo_(12)O_(40) as a catalyst

Deep eutectic solvents(DESs) are a new class of green solvents analogous to ionic liquids due to their biodegradable capacity and low cost. However, the direct extractive desulfurization of diesel oil by DESs cannot meet the government’s standard. In this work, amphiphilic polyoxometalates were synthesized and characterized by FT-IR and mass spectrometry.The oxidative desulfurization results showed that benzothiophene(BT) could be completely removed by employing a [(CH)P(CH)]PMoO, DES(ChCl/2 Ac) and HOsystem. It was also found that the organic cation of catalysts played a positive role in oxidative desulfurization. The reaction conditions, such as reaction temperature and time, the amount of catalyst and DES and HO/S(O/S) molar ratio, were optimized. Different sulfides were tested to determine the desulfurization selectivity of the optimal reaction system, and it was found that 97.2% of dibenzothiophene(DBT) could be removed followed by 80.7% of 4-MDBT and 76.0% of 4,6-DMDBT. After reaction, the IR spectra showed that the catalyst [(CH)P(CH)]PMoOwas stable during the reaction process and the oxidative product was dibenzothiophene sulfone(DBTO). Furthermore, the catalyst can be regenerated and recycled for four runs with little loss of activity.

Green aerobic oxidative desulfurization of diesel by constructing an Fe-Anderson type polyoxometalate and benzene sulfonic acid-based deep eutectic solvent biomimetic cycle

A unique redox-coupled biomimetic system was developed, in which Fe-Anderson type polyoxometalates(POMs) were employed as electron transfer mediators(ETMs) and benzenesulfonic acid(BSA)-based deep eutectic solvents(DESs) were used as electron-donors for aerobic oxidative desulfurization(AODS) of diesel fuel. Different compositions of DESs were used and the polyethylene glycol 2000(PEG2000)/2.5 BSA system showed the highest desulfurization activity, with the removal of dibenzothiophene(DBT) at 60 ℃ reaching 95% in 60 min. The excellent desulfurization activity of the system is due to the in situ formation of peroxysulfonate via a biomimetic process. By constructing a coupled redox system, Fe-Anderson type POMs as ETMs reduce the activation energy of oxygen-activated sulfonate. The physical characteristics of four different DESs were tested. The results show that the conductivity of DESs is correlated with the composition of BSA-based DESs. However, there is no similar trend in viscosity testing at the same temperature, and the maximum viscosity value is obtained for the PEG2000/2.5 BSA system at 60 ℃, which may be associated with the stronger hydrogen bonds. It is worth noting that the PEG2000/2.5 BSA system also possesses the best desulfurization activity, which suggests that the activity of the desulfurization system is related to the strength of the hydrogen bond in DESs. Finally, the biomimetic desulfurization system exhibits excellent performance and good stability under mild reaction conditions(60 ℃, atmospheric pressure, oxygen as the oxidant).

Ionic liquids/deep eutectic solvents for CO_(2) capture:Reviewing and evaluating

The CO_(2)solubilities(including CO_(2)Henry’s constant)in physical-and chemical-based ILs/DESs and the COSMO-RS models describing these properties were comprehensively collected and summarized.The summarized results indicate that chemical-based ILs/DESs are superior to physical-based ILs/DESs for CO_(2)capture,especially those ILs have functionalized cation and anion,and superbase DESs;some of the superbase DESs have higher CO_(2)solubilities than those of ILs;the best physical-and chemical-based ILs,as well as physical-and chemicalbased DESs are[BMIM][BF4](4.20 mol kg^(-1)),[DETAH][Im](11.91 mol kg^(-1)),[L-Arg]-Gly 1:6(4.92 mol kg^(-1))and TBD-EG 1:4(12.90 mol kg^(-1)),respectively.Besides the original COSMO-RS mainly providing qualitative predictions,six corrected COSMO-RS models have been proposed to improve the prediction performance based on the experimental data,but only one model is with universal parameters.The newly determined experimental results were further used to verify the perditions of original and corrected COSMO-RS models.The comparison indicates that the original COSMO-RS qualitatively predicts CO_(2)solubility for some but not all ILs/DESs,while the quantitative prediction is incapable at all.The original COSMO-RS is capable to predict CO_(2)Henry’s constant qualitatively for both physical-based ILs and DESs,and quantitative prediction is only available for DESs.For the corrected COSMO-RS models,only the model with universal parameters provides quantitative predictions for CO_(2)solubility in physical-based DESs,while other corrected models always show large deviations(>83%)compared with the experimental CO_(2)Henry’s constants.