Image segmentation is a key and fundamental problem in image processing,computer graphics,and computer vision.Level set based method for image segmentation is used widely for its topology flexibility and proper mathem...Image segmentation is a key and fundamental problem in image processing,computer graphics,and computer vision.Level set based method for image segmentation is used widely for its topology flexibility and proper mathematical formulation.However,poor performance of existing level set models on noisy images and weak boundary limit its application in image segmentation.In this paper,we present a region consistency constraint term to measure the regional consistency on both sides of the boundary,this term defines the boundary of the image within a range,and hence increases the stability of the level set model.The term can make existing level set models significantly improve the efficiency of the algorithms on segmenting images with noise and weak boundary.Furthermore,this constraint term can make edge-based level set model overcome the defect of sensitivity to the initial contour.The experimental results show that our algorithm is efficient for image segmentation and outperform the existing state-of-art methods regarding images with noise and weak boundary.展开更多
Taking the 13-point smoothed monthly sunspot number,Ri, and the deviation of the 13 associated monthly sunspot numbers from the smoothed one, Di, as a number-pair describing the global level of sunspot activity, the e...Taking the 13-point smoothed monthly sunspot number,Ri, and the deviation of the 13 associated monthly sunspot numbers from the smoothed one, Di, as a number-pair describing the global level of sunspot activity, the evolution of the level is statistically studied for the period from the month which is just 48 months before the minimum to the minimum in the descending phase, using the observed data of Solar Cycles 10 to 22. Our results show (1) for 46 months (94%) of the studied 49 months it is found that for a given month, the distribution of the 13 pairs which come from the 13 solar cycles on a log Ri - Di plane may be fitted by a straight line with a correlation coefficient larger than the critical one at confidence level a = 5%, and for 36 months (73%) the fitting is even better, for a = 1%; (2) time variations of these two parameters and their correlations in the studied period can be described respectively by functions of time, whose main trends may be expressed by a linear or simple curvilinear function; (3) the evolutionary path of the level of sunspot activity may be represented by a logarithmic function as log/~ = 0.704 lnDi - 0.291.展开更多
According to the special requirements of secondary mining of resources in gateway-and-pillar goal in extra-thick seams of Shanxi, this paper presents a technical proposal of back stoping from level floors. Numerical s...According to the special requirements of secondary mining of resources in gateway-and-pillar goal in extra-thick seams of Shanxi, this paper presents a technical proposal of back stoping from level floors. Numerical simulation and theoretical analysis are ccsed to investigate the compaction characteristics of cavities under stress as well as an appropriate mining height of the primary-mining layer based on dif- ferent mining widths and pillar widths. For Yangjian coal mine, the mining thickness of the first seam during back stoping from level floor is determined to be 3 m, which meets the relevant requirements. Gateway-and-pillar goaf of a single layer has a range of influence of 9 m vertically. If gateway-and-pillar goaf occurs both in 9-1 and 9-5 layers, the range is extended to within 11.2 m. When the mining width of a gateway is less than 2 m or larger than 5 m, the gateway-and-pillar goal in the upper layer of the primary-mining seam can be filled in and compacted after stoping. When the working face is 2 m away from the gateway and pillar before entering into it and after passing through it, the coal body under the gateway and pillar is subjected to relatively high stress. During mining of the upper layer, moreover, the working face should interlock the goaf in primary-mining layer for 20 m.展开更多
Liver segmentation in CT images is an important step for liver volumetry and vascular evaluation in liver pre-surgical planning. In this paper, a segmentation method based on distance regularized level set evolution(D...Liver segmentation in CT images is an important step for liver volumetry and vascular evaluation in liver pre-surgical planning. In this paper, a segmentation method based on distance regularized level set evolution(DRLSE) model was proposed, which incorporated a distance regularization term into the conventional Chan-Vese (C-V) model. In addition, the region growing method was utilized to generate the initial liver mask for each slice, which could decrease the computation time for level-set propagation. The experimental results show that the method can dramatically decrease the evolving time and keep the accuracy of segmentation. The new method is averagely 15 times faster than the method based on conventional C-V model in segmenting a slice.展开更多
Crustal deformation shows different patterns at different depths due to changes in the physical properties of rock.Tectonic levels can be defined based on the geometry and deformation mechanisms of crustal deformation...Crustal deformation shows different patterns at different depths due to changes in the physical properties of rock.Tectonic levels can be defined based on the geometry and deformation mechanisms of crustal deformation patterns. Nujiang Gorge, with a high riverbed drop, great erosion depth, and strong deformation, has rock exposures at different tectonic levels and thus provides an ideal lab for deformation study. This paper takes the Nujiang Gorge from Chawalong to Fugong as the object to identify structural deformation patterns at different depths through field study and deformation analysis. At depth, the primary form of deformation is flow deformation, as shown on the outcrops at Maji. Ductile shear deformation can be found in many outcrops within the study region, e.g., the Gaoligong dextral shear zone and Puladi-Songta sinistral shear zone that lie to the south and north of Maji, respectively. Further to the north of Puladi, the dominated deformation pattern is similar fold and dense sub-vertical foliation. In addition, brittle faults, as evidence of shallow deformation, can be seen overprinting on the deeper deformation features all over the region. Based on those observations, this paper identifies four tectonic levels from depth to the surface: flow deformation, ductile shear deformation, similar fold, and brittle fault deformation, all of which result from the NEE-SWW compressive stress field. Further evidence from studies on the region′s thermal evolution and regional tectonics suggests that the development of different tectonic levels is closely linked to the discrepant uplift or denudation since the Miocene(~21 Ma).展开更多
基金supported in part by the NSFC-Zhejiang Joint Fund of the Integration of Informatization and Industrialization(U1609218)NSFC(61772312,61373078,61772253)+1 种基金the Key Research and Development Project of Shandong Province(2017GGX10110)NSF of Shandong Province(ZR2016FM21,ZR2016FM13)
文摘Image segmentation is a key and fundamental problem in image processing,computer graphics,and computer vision.Level set based method for image segmentation is used widely for its topology flexibility and proper mathematical formulation.However,poor performance of existing level set models on noisy images and weak boundary limit its application in image segmentation.In this paper,we present a region consistency constraint term to measure the regional consistency on both sides of the boundary,this term defines the boundary of the image within a range,and hence increases the stability of the level set model.The term can make existing level set models significantly improve the efficiency of the algorithms on segmenting images with noise and weak boundary.Furthermore,this constraint term can make edge-based level set model overcome the defect of sensitivity to the initial contour.The experimental results show that our algorithm is efficient for image segmentation and outperform the existing state-of-art methods regarding images with noise and weak boundary.
基金Supported by the National Natural Science Foundation of China.
文摘Taking the 13-point smoothed monthly sunspot number,Ri, and the deviation of the 13 associated monthly sunspot numbers from the smoothed one, Di, as a number-pair describing the global level of sunspot activity, the evolution of the level is statistically studied for the period from the month which is just 48 months before the minimum to the minimum in the descending phase, using the observed data of Solar Cycles 10 to 22. Our results show (1) for 46 months (94%) of the studied 49 months it is found that for a given month, the distribution of the 13 pairs which come from the 13 solar cycles on a log Ri - Di plane may be fitted by a straight line with a correlation coefficient larger than the critical one at confidence level a = 5%, and for 36 months (73%) the fitting is even better, for a = 1%; (2) time variations of these two parameters and their correlations in the studied period can be described respectively by functions of time, whose main trends may be expressed by a linear or simple curvilinear function; (3) the evolutionary path of the level of sunspot activity may be represented by a logarithmic function as log/~ = 0.704 lnDi - 0.291.
基金Financial support for this work was provided by the National High-Tech Research and Development Program of China (No. 2012AA062101)the Priority Academic Development Program of Jiangsu Higher Education Institutions (No. SZBF2011-6-B35)the Graduate Students Innovation Fund of Colleges and Universities in Jiangsu Province (No. CXZZ12_0950)
文摘According to the special requirements of secondary mining of resources in gateway-and-pillar goal in extra-thick seams of Shanxi, this paper presents a technical proposal of back stoping from level floors. Numerical simulation and theoretical analysis are ccsed to investigate the compaction characteristics of cavities under stress as well as an appropriate mining height of the primary-mining layer based on dif- ferent mining widths and pillar widths. For Yangjian coal mine, the mining thickness of the first seam during back stoping from level floor is determined to be 3 m, which meets the relevant requirements. Gateway-and-pillar goaf of a single layer has a range of influence of 9 m vertically. If gateway-and-pillar goaf occurs both in 9-1 and 9-5 layers, the range is extended to within 11.2 m. When the mining width of a gateway is less than 2 m or larger than 5 m, the gateway-and-pillar goal in the upper layer of the primary-mining seam can be filled in and compacted after stoping. When the working face is 2 m away from the gateway and pillar before entering into it and after passing through it, the coal body under the gateway and pillar is subjected to relatively high stress. During mining of the upper layer, moreover, the working face should interlock the goaf in primary-mining layer for 20 m.
文摘Liver segmentation in CT images is an important step for liver volumetry and vascular evaluation in liver pre-surgical planning. In this paper, a segmentation method based on distance regularized level set evolution(DRLSE) model was proposed, which incorporated a distance regularization term into the conventional Chan-Vese (C-V) model. In addition, the region growing method was utilized to generate the initial liver mask for each slice, which could decrease the computation time for level-set propagation. The experimental results show that the method can dramatically decrease the evolving time and keep the accuracy of segmentation. The new method is averagely 15 times faster than the method based on conventional C-V model in segmenting a slice.
基金supported by the Project of the China Geological Survey (Grant No. 12120113013700)the Director Fund project of China Earthquake Disaster Prevention Center (Grant No. 201604)
文摘Crustal deformation shows different patterns at different depths due to changes in the physical properties of rock.Tectonic levels can be defined based on the geometry and deformation mechanisms of crustal deformation patterns. Nujiang Gorge, with a high riverbed drop, great erosion depth, and strong deformation, has rock exposures at different tectonic levels and thus provides an ideal lab for deformation study. This paper takes the Nujiang Gorge from Chawalong to Fugong as the object to identify structural deformation patterns at different depths through field study and deformation analysis. At depth, the primary form of deformation is flow deformation, as shown on the outcrops at Maji. Ductile shear deformation can be found in many outcrops within the study region, e.g., the Gaoligong dextral shear zone and Puladi-Songta sinistral shear zone that lie to the south and north of Maji, respectively. Further to the north of Puladi, the dominated deformation pattern is similar fold and dense sub-vertical foliation. In addition, brittle faults, as evidence of shallow deformation, can be seen overprinting on the deeper deformation features all over the region. Based on those observations, this paper identifies four tectonic levels from depth to the surface: flow deformation, ductile shear deformation, similar fold, and brittle fault deformation, all of which result from the NEE-SWW compressive stress field. Further evidence from studies on the region′s thermal evolution and regional tectonics suggests that the development of different tectonic levels is closely linked to the discrepant uplift or denudation since the Miocene(~21 Ma).