Comprehensive assessment on dynamic roof instability under fractured rock mass conditions in the excavation disturbed zone

The damage process of fractured rock mass showed that the fracture in rocks induced roof collapse in Yangchangwan Coal Mine, China. The rock mass was particularly weak and fractured. There occurred 6 large-scale dynamical roof falls in the excavation disturbed zone （EDZ） with the collapsing volume of 216 m^3. First, the field detailed geological environment, regional seismic dynamics, and dynamic instability of roadways were generally investigated. Second, the field multiple-index monitoring measurements for detecting the deep delamination of the roof, convergence deformation, bolt-cable load, acoustic emission （AE） characteristic parameters, total AE events, AE energy-releasing rate, rock mass fracture, and damage were arranged. Finally, according to the time-space-strength relations, a quantitative assessment of the influence of rock-mass damage on the dynamic roof instability was accomplished.

Dynamic destabilization analysis based on AE experiment of deep-seated,steep-inclined and extra-thick coal seam

No. 5 coal seam in Huating Coal Mine is a deep-seated, steep-inclined extra-thick coal seam where excavation disturbance is quite frequent. The maximum and minimum principal stresses differ widely. During mining, dynamical destabilization happens frequently and induce tragedies. Based on the comparison between the acoustic emission （AE） experiment on dynamical destabilization of coal rock and the related in situ testing results, this article provides comprehensive analysis on the regular quantificational AE patterns （energy rate, total events） of coal rock destabilization in complex-variable environment. The comparison parameters include dynamic tension energy rate, deformation resistance to compression, and shear stress.

Comprehensive analysis of safe mining to heavy and steep coal seam under complex geophysics environment

In virtue of effect of N-S intensive ground stress and mining disturbance to +579E2EB_(1+2) mining site at Weihuliang Mine,the dip angle and section height is 65° and 52 m,respectively,the collapses happed frequently during mining.Firstly,mining condi- tions,spatial structure and parameters were investigated.Then physical simulation and dynamic numerical tracing and elaborate simulation relating roof and top-coal were ap- plied based on 2D-Block Program and quantitative regularity of stress at variable depths had been estimated.Furthermore,it was manifested that effective measures,i.e.,fast mining,control symmetrical top-coal-caving at dip and strike directions,optimizing ventila- tion system,active-stereo preventing gas were performed successfully in mining practice. Ultimately,the derived dynamic hazard were prevented so as to safety mining.

Numerical modeling for the coupled thermo-mechanical processes and spalling phenomena in sp Pillar Stability Experiment (APSE)

In this paper, the coupled thermo-mechanical （TM） processes in the AEspoe Pillar Stability Experiment （APSE） carried out by the Swedish Nuclear Fuel and Waste Management Company （SKB） were simulated using both continuum and discontinuum based numerical methods. Two-dimensional （2D） and three- dimensional （3D） finite element method （FEM） and 2D distinct element method （DEM） with particles were used. The main objective for the large scale in situ experiment is to investigate the yielding strength of crystalline rock and the formation of the excavation disturbed/damaged zone （EDZ） during excavation of two boreholes, pressurizing of one of the boreholes and heating. For the DEM simulations, the heat flow algorithm was newly introduced into the original code. The calculated stress, displacement and temperature distributions were compared with the ones obtained from in situ measurements and FEM simulations. A parametric study for initial microcracks was also performed to reproduce the spalling phenomena observed in the APSE.

Pellet mixtures in isolation barriers

Granular mixtures made of high-density pellets of bentonite are being evaluated as an alternative buffer material for waste isolation. Ease of handling is an often-mentioned advantage. The paper describes the experimental program performed to characterize the hydro-mechanical （HM） behaviour of compacted pellet mixtures. Grain size distribution was adjusted to a maximum pellet size compatible with the specimen＇s dimensions. Dry densities of statically compacted specimens varied in most of the cases in the range from 1.3 to 1.5 Mg/m^3. Pellets had a very high dry density, close to 2 Mg/m^3. The outstanding characteristic of these mixtures is their discontinuous porosity. Pore sizes of the compacted pellets varied around 10 nm. However, the inter-pellet size of the pores was four to five orders of magnitude higher. This double porosity and the highly expansive nature of the pellets controlled all the hydraulic and mechanical properties of the mixture. Performed tests include infiltration tests using different water injection rates and mechanisms of water transfer （in liquid and vapour phases）, suction-controlled oedometer tests and swelling pressure tests. The interpretation of some performed tests required back analysis procedures using a hydro-mechanical （HM） computer code. Material response was studied within the framework of the elastoplastic constitutive model proposed by Alonso et al. （1990） （Barcelona basic model, BBM）. Parameters for the model were identified and also a set of hydraulic laws are necessary to perform coupled HM analysis. A large scale in-situ test （the ＂EB＂ test in Mont Terri, Switzerland） was described and analyzed. Rock barrier parameters were adjusted on the basis of available tests. The test excavation, barrier emplacement and forced hydration were simulated by means of the CODEBRIGHT program. The comparison between measurements and computed results include data on relative humidity in the rock and the buffer, swelling pressures and displacements.