Synthesis and Characterization of Naphthalenesulfonic Formaldehyde Condensates for Improving the Solubility of C.I. Reactive Blue 19 in Alkali Liquor

The solubility of C.I. reactive blue 19 in aqueous alkali is poor, so it isn't used to dye cellulosic fiber in cold pad-batch dyeing. In order to improve the solubility of this dyestuff in alkali liquor, the right dispersants will be needed. A series of condensates are synthesized by changing the synthesis conditions such as the ratio of naphthalenesulfonic (N) to formaldehyde (F), acidity, and their compositions are confirmed by MS spectrum. It is found that in acidity scope of 20%-24% and the ratio of N to F 1∶0.33, the synthesized condensates can efficiently improve the solubility of C.I. reactive blue 19 in alkali liquor. In addition, the influences of the condensates on the exhaust dyeing and the cold pad-batch dyeing are tested.

Flame Retardant Finishing of Poly(ethylene terephthalate) Fabric with a Carbon Source Containing DOPO Derivative

9, 10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide( DOPO)-based flame retardant( DOPO-DOPC) which contains carbon source was used to improve the flame retardancy of poly( ethylene terephthalate)( PET) fabrics. The prepared DOPODOPC dispersion was applied onto PET fabrics via two kinds of processes,thermosol process and exhaustion process,and in the later using it alone or together with disperse dyes. The flame retardancy of PET fabrics was determined by limiting oxygen index( LOI) and vertical burning test. The results showed that DOPODOPC could obviously improve the flame retardancy of PET fabrics.The PET fabric treated by 60 g/L DOPO-DOPC dispersion via exhaustion process achieved an LOI value of 32. 3%,for example.The flame retardancy and dyeing performances showed that DOPODOPC dispersion could be used together with a part of disperse dyes in one bath. The thermal stability of DOPO-DOPC and the treated PET fabrics were investigated by thermogravimetric analysis( TGA). And the flame retardant mechanism of DOPO-DOPC treated PET fabrics was further investigated by pyrolysis-gas chromatography/mass spectrometry( Py-GC/MS), Fourier transform infrared spectroscopy( FTIR) and scanning electron microscopy( SEM).

Simplified creation of polyester fabric supported Fe-based MOFs by an industrialized dyeing process: Conditions optimization, photocatalytics activity and polyvinyl alcohol removal

MIL-53(Fe) was successfully prepared and deposited on the surface carboxylated polyester(PET) fiber by an optimized conventional solvothermal or industrialized high temperature pressure exhaustion(HTPE) process to develop a PET fiber supported MIL-53(Fe) photocatalyst(MIL-Fe@PET) for the degradation of polyvinyl alcohol(PVA) in water under light emitting diode(LED) visible irradiation. On the basis of several characterizations, MIL-Fe@PET was tested for the photocalytic ability and degradation mechanism. It was found that temperature elevation significantly enhanced the formation and deposition of MIL-53(Fe) with better photocatalytic activity. However, higher temperature than 130℃ was not in favor of its photocatalytic activity. Increasing the number of surface carboxyl groups of the modified PET fiber could cause a liner improvement in MIL-53(Fe) loading content and photocatalytic ability. High visible irradiation intensity also dramatically increased photocatalytic ability and PVA degradation efficiency of MIL-Fe@PET. Na_(2)S_(2)O_(8) was used to replace H_(2)O_(2) as electron acceptor for further promoting PVA degradation in this system. MIL-Fe@PET prepared by HTPE process showed higher MIL-53(Fe) loading content and slightly lower PVA degradation efficiency than that prepared by solvothermal process at the same conditions. These findings provided a practical strategy for the large-scale production of the supported MIL-53(Fe) as a photocatalyst in the future.