Empirical Human Rights Studies Contribute to Building a Society Under the Rule of Law——Summary of the Fifth National Meeting for the Exchange of Work Experience Among Human Rights Research Institutions

From Nov. 5 to 6, 2013, the China Society for Human Rights Studies （CSHRS）held the Fifth National Meeting for the Exchange of Work Experience Among Human Rights Research Institutions at Wuhan University. More than 100 experts and scholars, focusing on empirical human rights studies and their contribution to building a society based on the rule of law, shared their work experience and discussed effective strategies. CSHRS President Luo Haocai, who served as vice chairman of the 10th National Committee of the Chinese People＇s Political Consultative Conference,

Excitation of chorus-like waves by temperature anisotropy in dipole research experiment (DREX): A numerical study

Due to their significant roles in the radiation belts dynamics, chorus waves are widely investigaled in observations, experiments, and simulations. In this paper, numerical studies for the generation of chorus-like waves in a launching device, dipole research experiment （DREX）, are carried out by a hybrid code. The DREX plasma is generated b} electron cyclotron resonance （ECR）, which leads to an intrinsic temperature anisotropy of energetic electrons. Thus the whistler instability can be excited in the device. We then investigate the effects of three parameters, i.e., the cold plasma density no, the hot plasma density nh, and the parallel thermal velocity of energetic electrons, on the generation of chorus-like waves under the DREX design parameters. It is obtained that a larger temperature anisotropy is needed to excite chorus-like waves with a high nc with other parameters fixed. Then we fix the plasma density and parallel thermal velocity, while varying the hot plasma density. It is found that with the increase of nh, the spectrum of the generated waves changes from no chorus elements, to that with several chorus elements, and then further to broad-band hiss-like waves. Besides, different structures of chorus- like waves, such as rising-tone and/or falling-tone structures, can be generated at different parallel thermal velocities in the DREX parameter range.

Development of plasma sources for Dipole Research EXperiment(DREX)

Dipole Research EXperiment（DREX） is a new terrella device as part of the Space Plasma Environment Research Facility（SPERF） for laboratory studies of space physics relevant to the inner magnetospheric plasmas. Adequate plasma sources are very important for DREX to achieve its scientific goals. According to different research requirements, there are two density regimes for DREX. The low density regime will be achieved by an electron cyclotron resonance（ECR） system for the ‘whistler/chorus＇ wave investigation, while the high density regime will be achieved by biased cold cathode discharge for the desired ‘Alfvén＇ wave study. The parameters of ‘whistler/chorus＇ waves and ‘Alfvén＇ waves are determined by the scaling law between space and laboratory plasmas in the current device. In this paper, the initial design of these two plasma sources for DREX is described. Focus is placed on the chosen frequency and operation mode of the ECR system which will produce relatively low density ‘artificial radiation belt＇ plasmas and the seed electrons, followed by the design of biased cold cathode discharge to generate plasma with high density.

Experimental and numerical studies of Ca(OH)_(2)/CaO dehydration process in a fixed-bed reactor for thermochemical energy storage

The Ca(OH)_(2)/CaO thermochemical energy storage(TCES)system based on calcium looping has received extensive attention owing to its high energy storage density,prolonged energy storage time,and environmental friendliness.The heat storage process of the Ca(OH)_(2)/CaO TCES system in a mixed heating reactor was evaluated in this study,by employing a combination of direct and indirect heating modes.The dehydration process was studied experimentally,and a numerical model was established and verified based on the experimental results.The dehydration behavior of 500 g of Ca(OH)_(2) powder was investigated in a fixed-bed reactor with mixed heating.The experimental and simulation results indicated that mixed heating causes combined centripetal and horizontal propulsion.Heat input is the main limiting factor in the heat storage process,because the radial advance of the reaction is hindered by the low thermal conductivity of the solid reactant particles.Heat transmission partitions were added to enhance the performance of the reactor.The performance of the modified reactor was compared with that of a conventional reactor.The radial heat transmission partitions in the modified reactor effectively enhance the energy storage rate and reduce the reaction time by 59.5%compared with the reactor without partitions.

Effect of Loading Condition and Temperature on Dynamic Properties of Asphalt Mixtures

In order to study the effects of loading condition and temperature on the dynamic properties of asphalt mixtures, the dynamic loading tests on different loading condition （various speeds and loads under a certain roughness） and temperature conditions were performed. The experimental result show that the dynamic properties of asphalt mixtures are influenced by vehicle load and speed, besides, the effects of temperature on dynamic properties of asphalt mixture are significant.

Experimental Research on Inlet Steady Swirl Distortion in an Axial Compressor with Non-Uniform Tip Clearance

The inlet swirl distortion and non-uniform tip clearance have great effects on aero-engine performance and stall margin.In this paper,the effects of paired swirl distortion on the aerodynamic stability and stall inception of a single stage axial compressor with non-uniform tip clearance are quantitatively analyzed by using the swirl distortion descriptors.The experimental results show that the paired swirl distortion dominated by co-rotating swirl improves the stability of the axial compressor.For a single-stage axial compressor with eccentricity of 100%,the stall inception starts at the maximum tip clearance with clean inlet.The initial position of the stall inception is determined by the maximum tip clearance when the small intensity paired swirl distortion exists at the compressor inlet.As the swirl intensity increases,it shifts towards the position of the counter rotating swirl vortex core.The inlet swirl will not change the type of stall inception.