Experimental Study on Electrostatically Actuated Micro-Gripper Based on Silica Process

The characteristics of a kind of comb-drive electrostatic actuated micro-gripper are tested. The test platform using a microscope-CCD-computer, the state information of the micro-gripper obtained by data acquisition and image processing, voltage-displacement characteristic curve is obtained and the mathematical equation is established. The analysis of the characteristic equation has shown the consistency and rationality of the theoretical design and the experimental results. The main factors that cause the difference between the theoretical design and the actual test performance are analyzed, and the design method and experimental results is obtained for the micro-gripper in the field of micro-assembly.

Experimental studies of focal mechanism based on the dynamic process of energy release

ＥｘｐｅｒｉｍｅｎｔａｌｓｔｕｄｉｅｓｏｆｆｏｃａｌｍｅｃｈａｎｉｓｍｂａｓｅｄｏｎｔｈｅｄｙｎａｍｉｃｐｒｏｃｅｓｏｆｅｎｅｒｇｙｒｅｌｅａｓｅＸＩＭＩＮＧＺＨＥＮＧ１）（郑熙铭）ＨＯＵＸＩＵＧＡＯ２）（高后秀）ＹＵＱＩＮＹＡＮＧ２）（杨渝...

Simulation Experimental Study on Hydrodynamics Process of Erosion and Sediment by Runoff in Grassland

[Objective]The aim was to study the simulation test of hydrodynamics process of erosion.[Method]Through the runoff scouring experiment,the property of soil erosion in Damaoqi grassland in Inner Mongolia was studied.The process and mechanism of soil erosion were studied.[Result]The results of runoff scouring experiment on inner Damaoqi steppe showed that the mean flow velocity of change slope increased with the discharge of flow and slope gradient.The mean silt content rate,the mean sediment transport rate and the mean sheer stress all increased when the discharge of flow increased,which changed in parabolic form with the increase of slope gradient and the critical gradient is 25°.The relationship between the mean sediment transport rate and the mean sheer stress was linear.[Conclusion]The study provided theoretic basis for the report of soil erosion in grassland in China.

Research on the Application of Intelligence Teaching Mode of Superstar Platform in the Teaching of Experimental Design and Data Processing

Experimental Design and Data Processing is an important core professional basic course for food science majors.This course is theoretical and practical,and there are many formulas,abstract contents and difficult to understand,and there are some problems in the teaching process,such as students1 poor interest in learning,insufficient mastery of what they have learned,and inability to combine theory with practice organically.Through analyzing the existing problems,this paper puts forward some reform measures for the teaching mode of experimental design and data processing by using the intelligent teaching of Superstar platform.

Experimental Study of Monitoring and Controlling of Composite Cure Process in Autoclave Featured with Fiber Optic Sensor

With the aid of the latest fiber optic sensing technology parameters in the cure process of ther- mosetting resin-matrix composite, such as temperature, viscosity,void and residual stress, can be monitored entirely and efficiently.In this paper, experiment results of viscosity measurement in composite cure process in autoclave using fiber optic sensors are presented. Based on the sensed information, a computer program is utilized to control the cure process. With this technology, the cure process becomes more apparent and controllable, which will greatly improve the cured products and reduce the cost.

Selection of Leading Industry in Anshun Experimental District Based on Analytic Hierarchy Process

Analytic Hierarchy Process is selected according to the selection method of leading industries by both domestic and foreign scholars. Leading industries which can accelerate the overall economic development of Anshun Experimental District is taken as the target layer; and market demand, efficiency standards and local conditions are taken as the criterion layers, so as to construct the select model of leading industry and to choose the leading industry in Anshun Experimental District. Result shows that the priority order of the leading industry selection in Anshun Experimental District is as follows: tourism > pharmacy > transportation > energy > food processing > characteristic agriculture > package and printing > automobile industry > mining > electric engineering.

合成孔径雷达高分辨率成像虚拟仿真实验平台设计

合成孔径雷达(synthetic aperture radar,SAR)系统组成复杂,搭载于飞机、卫星等运动平台上才可实现数据获取,难以开展基于SAR雷达实物的实验教学。为解决此问题,设计并搭建了SAR高分辨率成像虚拟仿真实验平台。该虚拟仿真实验平台将系统设计技术、实验设计技术、数据采集过程、信号处理技术、图像评估技术等SAR实验的完整流程进行了高展示度、高保真度、高交互性的计算机模拟。一方面,该虚拟仿真实验可以帮助学生理解SAR设计、工作和应用的流程,巩固相关课程基础知识,激发学习雷达信号处理知识的兴趣;另一方面,可以考查学生对相关知识的综合应用能力,增强学生解决实际问题的技能。该仿真平台已成功应用于虚拟仿真教学课程实践,教学效果良好,对培养新工科技术型人才具有重要意义。

Dynamic experimental study on rock meso-cracks growth by digital image processing technique

A new meso-mechanical testing scheme based on SEM was developed to carry out the experiment of microfracturing process of rocks. The microfracturing process of the pre-crack marble sample on surrounding rock in the immerged Long-big tunnel in Jinping Cascade II Hydropower Station under uniaxial compression was recorded by using the testing scheme. According to the stereology theory, the propagation and coalescent of cracks at meso-scale were quantitatively investigated with digital technology. Therefore, the basic geometric information of rock microcracks such as area, angle, length, width, perimeter, was obtained from binary images after segmentation. The failure mechanism of specimen under uniaxial compression with the quantitative information was studied from macro and microscopic point of view. The results show that the image of microfracturing process of the specimen can be observed and recorded digitally. During the damage of the specimen, the distribution of microcracks in the specimen is still subjected to exponential distribution with some microcracks concentrated in certain regions. Finally, the change law of the fractal dimension of the local element in marble sample under different external load conditions is obtained by means of the statistical calculation of the fractal dimension.

贯穿实验过程的电路实验考核评价方法

线上线下协同的多时间尺度实践教学是提高学生实践能动性和工程创新能力的有效措施。基于电路实验线上线下协同多维度、多时间尺度的实验教学内容和多空间、多时间尺度的教学模式,以学生实践能力和综合素质培养为目标,合理设计贯穿每个实验过程的多维度实验考核评价内容,提炼每个实验项目的课前-课中-课后的考核评价指标和量化各项指标的梯度权重,提出贯穿实验过程的电路实验考核评价方法,全面、科学地评价学生该门课程的综合成绩。该考核评价方法推动了电路实验教学的改革,提高了教与学的质量和效率,培养了学生的创新能力。

Effects of granulation process variables on the physical properties of dosage forms by combination of experimental design and principal component analysis

The current study was to understand how process variables of high shear wet granulations affect physical properties of granules and tablets. The knowledge gained was intended to be used for Quality-by-Design based process design and optimization. The variables were selected based on the risk assessment as impeller speed, liquid addition rate, and wet massing time. Formulation compositions were kept constant to minimize their influence on granules properties. Multiple linear regression models were built providing understanding of the impact of each variable on granule hardness, Carr’s index, tablet tensile strength, surface mean diameter of granules, and compression behavior. The experimental results showed that the impact of impeller speed was more dominant compared to wet massing time and water addition rate. The results also revealed that quality of granules and tablets could be optimized by adjusting specific process variables(impeller speed 1193 rpm, water spray rate 3.7 ml/min, and wet massing time 2.84 min). Overall desirability was 0.84 suggesting that the response values were closer to the target one. The SEM image of granules showed that spherical and smooth granules produced at higher impeller speed, whereas rough and irregular shape granules at lower speed. Moreover, multivariate data analysis demonstrated that impeller speed and massing time had strong correlation with the granule and tablet properties. In overall, the combined experimental design and principal component analysis approach allowed to better understand the correlation between process variables and granules and tablet attributes.

新工科背景下“三层次一体化”冶金工程递进式仿真实验教学体系构建

为突破传统高温、高危、长时、复杂冶金过程的实验教学难题,满足新工科建设提出的“冶金+”学科交叉等要求,江西理工大学冶金工程专业根据“专业为基、计算赋能”的思路,利用模拟仿真数字化、智能化现代手段,构建新工科背景下“三层次一体化”冶金工程递进式仿真实验教学体系,实现学生知识获取—知识应用—知识创新的递进式培养和冶金-材料-环境-化学-信息多学科交叉融通,以满足现代特色金属产业对一体化人才的需求,有效服务于稀土、钨、铜、锂等特色资源冶金产业绿色高质量发展和高素质专业人才培养需求。

金属空心球复合材料重力铸造工艺研究

基于对金属空心球复合材料的结构分析,采用金属型重力铸造法制备金属空心球复合材料。介绍了金属空心球复合材料金属型重力铸造工艺流程,并设计了一种成本低廉、简易成型、且能多次使用的金属型模具,且对金属空心球复合材料进行了实验试制及材料验证。结果表明,采用金属型重力铸造法能够制备出孔壁结构完整且孔洞随机分布的金属空心球复合材料,能实现空心球单一设计与梯度设计;金属空心球复合材料基体与空心球壁组织较为致密,且形成了厚度为25~30μm的界面层;金属空心球复合材料的应力-应变曲线具有明显的弹性阶段、塑性平台阶段和致密化阶段,且采用空心球梯度设计的金属空心球复合材料相较于空心球单一设计的金属空心球复合材料,其基本力学性能有明显的提升。最后,与传统的闭孔泡沫铝材料进行了对比分析,金属空心球复合材料整体稳定性更高,吸能效果更强。

农业科研试验站建设实践与建议——以河北省农林科学院石家庄果树研究所科研试验站为例

文章回顾了河北省农林科学院石家庄果树研究所科研用地发展历程,介绍了河北省农林科学院石家庄果树研究所科研试验站建设历程和取得的成效,并从试验站建设要立足长远、要高标准、要科学规范、要实现多功能化等方面提出了加强农业科研试验站建设的建议,以期为农业科研院所科学管理科研用地,提高科研用地利用效率,加强农业试验站建设提供参考。

矿物加工虚拟仿真实验教学建设及实践——以中南大学矿业学科为例

针对新时代矿业行业对专业人才的要求,以培养学生全周期工程思维和提高其工程胜任力为目标,采用虚拟仿真的教学手段,突破矿产资源加工过程中高温、高危、高成本等限制,解决传统教学无法开展全流程实验及生产极端工况操作等难题,将科研成果融入实验教学,有机融合数据库技术、虚拟仿真、专家系统、智能算法,让学生通过自主选题、自主探究学习、自主流程设计、自主设备搭建、自主调试运行,设计与资源特性相适应的工艺流程、生产设备及操作参数,实景体验工业生产过程异常工况,使其成为具有实干担当、开拓创新、国际视野和竞争力的矿业卓越人才。

基于正余弦函数设计位移运动算法的研究与实现

为实现机床加工运动过程中算法规划能输出连续的运动指令,提高位置控制精度,文章基于正余弦函数值周期连续变化的特性,设计出位移运动指令随时间连续变化的算法模型并进行公式推导。结合Matlab对算法的规划细节进行仿真分析,得到算法规划的控制指令平稳且连续,证明了算法模型建立与公式推导过程的正确性。选择机床加工PCB覆铜板运动过程为试验研究对象,使用激光干涉仪对机床加工实际位移距离进行测量,测得采用所设计的位移运动算法进行运动过程规划,位置控制精度能达到1.788μm,验证了位移运动算法的正确性。

基于便携式粗糙度仪的表面轮廓测量实验平台设计

该文基于便携式粗糙度仪设计了一种用于采集工件表面轮廓数据的测量实验平台,并同步开发轮廓分析软件。该测量实验平台由三轴移动装置、夹具、轮廓数据采集装置(粗糙度仪)及计算机组成,可采集水平方向上0.3~16.0 mm、垂直方向上–200~200μm复杂表面的轮廓数据,用于微结构或非球面等面型的测量实验。基于MATLAB软件设计模块开发了轮廓数据处理及分析软件,与金相显微镜及泰勒霍普森轮廓仪所测量的轮廓数据结果对比,该测量实验平台的测量误差低于5%,证明该平台及测量方法的可靠性和准确性。

环境工程专业学位硕士试验设计与数据处理课程教学优化——基于国内外三所高校案例

文章比较了清华大学试验设计与分析线上课程和昆士兰大学试验设计线下课程在教学内容和教学方法方面的差异,并分析了各自的特点;在此基础上,介绍了中国矿业大学环境工程专业学位硕士试验设计与数据处理课程结合人才培养目标,进行教学内容和教学方法优化,并实施线上线下混合式教学模式的实践。中国矿业大学的试验设计与数据处理课程教学达到了使学生“懂理论、会应用、能实践”的目标。

三极管共射放大实验电路频率特性的测试与分析

三极管共射放大电路实验是模拟电子技术基本实验之一,实验前基于Multisim波特图得到幅频特性及相频特性曲线。经与理论分析对照,有两个现象:一是上限截止频率远大于理论估算值;二是相频特性曲线在中频段某频率点发生-180°到180°相位跳变。针对第一个现象,实验后对测试数据利用Python进行处理,表明幅频特性下限频率点理论值、仿真值与测试值基本一致;上限频率点介于理论值与仿真值之间。针对第二个现象,经Python绘制了理论相频特性曲线,用示波器实测输入、输出信号的李莎如图形,表明没有相位的跳变。

多材料食品3D打印设备的工艺参数试验研究

为研制一种圆柱坐标式多材料食品3D打印设备,对其挤出、成型及多材料等工艺参数进行试验研究。以马铃薯泥混合材料为打印原材料,利用搭建的样机进行工艺参数试验。结果表明:打印喷嘴高度在1.1~1.6 mm,喷嘴直径大于0.8 mm,挤出速度与打印速度相匹配,具有良好的挤出特性;打印速度对产品成型尺寸偏差的影响最大,单层层厚对产品表面质量及成型效率的影响最大;快速、均衡及高精3种工况下,多材料的最佳回抽时间分别为12.5,14.5,15.0 s。研究为确定及优化圆柱坐标式多材料食品3D打印设备的工艺参数提供指导。

尾菜批式中温发酵和高温发酵过程对比试验研究

尾菜的快速无害化处理已成为高原夏菜产业发展的“瓶颈”。针对目前尾菜规模化处理厂普遍存在厌氧发酵过程不稳定,而国内外缺少尾菜恒温发酵过程研究的现状,在0.56 m^(3)的恒温发酵罐中开展了尾菜批式中温发酵和高温发酵过程的对比试验,对比了两个过程中沼气产气量、氨氮量、pH值和溶解性总固体的变化过程,并用修正的Gompertz方程分析了恒温厌氧发酵产甲烷过程,研究结果表明:在接种量30%、总固体含量(Total Solid,TS)2.2%的30天批式发酵过程中,中温发酵过程和高温发酵过程均可稳定进行,与修正的Gompertz方程拟合结果吻合度R^(2)均大于0.99。高温组累积产气量、产甲烷量分别为3939 L、2034.2 L,比中温组分别高出11.3%和15.5%,同时高温组甲烷体积分数达到50%的时间较中温组提前了3 d;中高温两试验组对应的最低pH值分别为6.66和6.52,后期均逐渐升高并稳定在7.30左右;两试验组氨氮浓度呈前期快速上升后持续上下浮动趋势,整体高温组大于中温组。试验研究为使用恒温厌氧发酵稳定快速无害化、规模化处理尾菜提供了借鉴和参考。