Simulation Experimental Study on Hydrodynamics Process of Erosion and Sediment by Runoff in Grassland

[Objective]The aim was to study the simulation test of hydrodynamics process of erosion.[Method]Through the runoff scouring experiment,the property of soil erosion in Damaoqi grassland in Inner Mongolia was studied.The process and mechanism of soil erosion were studied.[Result]The results of runoff scouring experiment on inner Damaoqi steppe showed that the mean flow velocity of change slope increased with the discharge of flow and slope gradient.The mean silt content rate,the mean sediment transport rate and the mean sheer stress all increased when the discharge of flow increased,which changed in parabolic form with the increase of slope gradient and the critical gradient is 25°.The relationship between the mean sediment transport rate and the mean sheer stress was linear.[Conclusion]The study provided theoretic basis for the report of soil erosion in grassland in China.

Research on the Application of Intelligence Teaching Mode of Superstar Platform in the Teaching of Experimental Design and Data Processing

Experimental Design and Data Processing is an important core professional basic course for food science majors.This course is theoretical and practical,and there are many formulas,abstract contents and difficult to understand,and there are some problems in the teaching process,such as students1 poor interest in learning,insufficient mastery of what they have learned,and inability to combine theory with practice organically.Through analyzing the existing problems,this paper puts forward some reform measures for the teaching mode of experimental design and data processing by using the intelligent teaching of Superstar platform.

Experimental Study of Monitoring and Controlling of Composite Cure Process in Autoclave Featured with Fiber Optic Sensor

With the aid of the latest fiber optic sensing technology parameters in the cure process of ther- mosetting resin-matrix composite, such as temperature, viscosity,void and residual stress, can be monitored entirely and efficiently.In this paper, experiment results of viscosity measurement in composite cure process in autoclave using fiber optic sensors are presented. Based on the sensed information, a computer program is utilized to control the cure process. With this technology, the cure process becomes more apparent and controllable, which will greatly improve the cured products and reduce the cost.

Computer Management of Quantitative Analysis Chemistry Experiment

The application of computer in the quantitative analysis chemistry experiment is a chemistry experiment teaching applications software, developed by Visual Basic （6.0）, based on the content of quantitative analysis chemistry experiment of chemistry major in higher institute. This software has the function of the automatic processing the experimental data, the automatic generation of test report copies, and the automatic evaluation of students＇ experimental results, which solve the reliability, objectivity and accuracy problems of the students＇ experiment data processing and evaluation, and avoid interference with human factors. The software has the characteristic of the easy installation, the easy operation, the strong practicability, pertinence, the systematicness and the running stability, so it provides a platform in the quantitative analysis chemistry experiment for the students＇ assessment system of automatic processing, and it has a high popularization value. The project＇s technical route design is reasonable, the research method is correct, and the experimental data processing results are reliable, which has reached the leading domestic level in the quantitative analysis chemistry experiment teaching field of computer data processing. And this project has been through the achievements appraisal of Gansu Provincial Sci. ＆ Tech. Department.

Evaluation of diagnostic ratios of medium and serious weathered oils from five different oil sources

Laboratory experiments were conducted to simulate oil weathering process, a medium to long term weathering process for 210-d, using samples collected from five different oil resources. Based on relative deviation and repeatability limit analysis about indexes of these samples, the results show there had been significant changes in diagnostic ratios among the initial and weathered samples of different oils during this process. Changes of selected n-alkane diagnostic ratios of all oil samples displayed more obviously than diagnostic ratios of terpanes,steranes and PAHs in this process. Almost all selected diagnostic ratios of terpanes, steranes and PAHs can be efficiently used in tracking sources of hydrocarbon pollution, differentiating from the n-alkane diagnostic ratios.In these efficient diagnostic ratios, only four ratios maintained good stability in the weathering processes and are more suitable because their relative deviation（RSD） are lower than 5%.

NUMERICAL EXPERIMENT WITH PROCESSES FOR EFFECT OF AUSTRALIAN COLD AIR ACTIVITY ON EAST-ASIAN SUMMER MONSOON

Based on diagnostic results,a numerical study is made of the processes of Australian cold air activity affecting East Asian summer monsoon by using Kuo-Qian P-σ incorporated coordinate five-layer primitive equation spherical band model.Analysis is done of the response to the Southern Hemisphere circulation with and without cold air activity in Australia of the flow,rainfall and diabatic heating fields in the monsoon area of Asia,especially,East Asia,with special attention to the intensification and northward march of the monsoon due to the activity.It is found that the processes for the effect transmission are very analogous to the meridional propagation of quasi-40-day oscillation,together with the meridional wind disturbance showing south-north travel and the flow/rainfall fields exhibitirg corresponding movement in this direction,only with a 12-day lag.

Simulation of construction shape-forming process of cable domes

A cable dome has no stiffness or load carrying capacity unless it has been prestressed.Analyses of cable domes are based on successful prestressing designs,making force finding analysis very important.A new force finding method named the imbal-ance force iterative method is proposed,which can overcome some limitations of the integrity feasible prestressing method.For instance,even if groups are assigned by mistake,the pretension distribution that satisfies the known geometry form can also be found.This method possess good stability and calculation efficiency,and a case study indicates that it is applicable to the force finding of large and complicated cable domes.On the other hand,form finding analysis of cable domes is also a key engineering problem.However,rigid displacement occurs in this process,which makes the analysis more complex.In this pa-per,the dynamic relaxation method was selected,and the problem of rigid displacement was therefore effectively solved.The method includes two steps:first,the stretching cables are released,and secondly,an axial force is imposed on the two ends of each released cable.This method is convenient in its calculation and clear in its conception.A case study indicates that the method is suitable for the simulation of the construction process of various cable domes and cable-strut tension structures.Moreover,a form finding experiment was conducted on a model of a cable dome with a diameter of 4.8 m by tensing diagonal cables.The behavior of the model in the form finding process was investigated.The experimental results indicate that the ini-tial lengths of members and prestress loss are key issues in cable domes design.The results also prove that the methods of form finding and force finding proposed in this paper are reliable and effective.