Liquefaction testing at a saturated loess site was performed under the simulated earthquake ground motion induced by artificial explosions with micro-time intervals.The time histories of ground acceleration,pore water...Liquefaction testing at a saturated loess site was performed under the simulated earthquake ground motion induced by artificial explosions with micro-time intervals.The time histories of ground acceleration,pore water pressure and the ultimate value of residual strain were recorded and measured.The modified FEQdrain computation software was used to analyze the liquefaction.Both the test and the analysis confirm the objective occurrence of loess liquefaction.Furthermore,the reliability of the method of the loess liquefaction analysis based on FEQdrain and the model of pore water pressure development of saturated loess are examined.展开更多
For qualifying the anti-shock performance of shipboard equipments and simulating actual underwater explosion environments, a novel dual-wave shock test machine is proposed to increase testing capability of shock test ...For qualifying the anti-shock performance of shipboard equipments and simulating actual underwater explosion environments, a novel dual-wave shock test machine is proposed to increase testing capability of shock test machines as well as to meet certain shock testing specification. The machine can generate a double-pulse acceleration shock for test articles according to specification defined in BV043/85. On the basis of the impact theory, a nonlinear dynamic model of the hydraulically-actuated test machine is established with thorough analysis on its mechanism which involves conversion of gas potential energy and dissipation of kinetic energy. Simulation results have demonstrated that the machine can produce a double-pulse acceleration shock in the time domain or a desired shock response spectrum in the frequency domain, which sets a theoretical base for the construction of the proposed machine.展开更多
The transmission ratio along the radian direction normal to the joints was studied in the Universal Distinct Element Code (UDEC). The variation of the transmission ratio with the ratio of joint spacing to wavelength...The transmission ratio along the radian direction normal to the joints was studied in the Universal Distinct Element Code (UDEC). The variation of the transmission ratio with the ratio of joint spacing to wavelength was generalized into a general curve, which was determined by two critical points. The relationship between the two critical points and the affecting factors, quantity of joints and the normalized normal stiffness of joints, were obtained. A prediction model of the transmission ratio in the radian direction normal to the joints was proposed. The proposed model was applied to a field explosion test. The estimated values of the peak particle velocity from the prediction model were compared with the field records. The comparisons showed that the prediction model of the transmission ratio in the direction normal to the joints in the process of 2-D compressional wave propagation through multiple parallel joints is reliable.展开更多
This paper pays attention to the analysis of overall macroscopic process of wavemaking induced by explosion. Based on establishing the simplified model and MAC method, the numerical simulations for formulating crater ...This paper pays attention to the analysis of overall macroscopic process of wavemaking induced by explosion. Based on establishing the simplified model and MAC method, the numerical simulations for formulating crater induced by touching water surface explosion, the bubble jumping out of the water surface induced by underwater explosion as well as hollow column formation for large equivalent explosion etc were carried out. In order to predict the wave field, the scheme simulated by falling and evoluting of an ″equivalent cylinder″ were proposed. In addition to researching the wavemaking response in a harbour, two joining methods in time domain were presented. The results indicate that the model and numerical methods are feasible.展开更多
基金China Ministry of Science and Technology (Granted No.2000-35)Registration No.for Publications of Lanzhou Institute of Seismology,CSB:LC2002-001.
文摘Liquefaction testing at a saturated loess site was performed under the simulated earthquake ground motion induced by artificial explosions with micro-time intervals.The time histories of ground acceleration,pore water pressure and the ultimate value of residual strain were recorded and measured.The modified FEQdrain computation software was used to analyze the liquefaction.Both the test and the analysis confirm the objective occurrence of loess liquefaction.Furthermore,the reliability of the method of the loess liquefaction analysis based on FEQdrain and the model of pore water pressure development of saturated loess are examined.
基金supported by China Naval Armament Department (No. 05131/1046).
文摘For qualifying the anti-shock performance of shipboard equipments and simulating actual underwater explosion environments, a novel dual-wave shock test machine is proposed to increase testing capability of shock test machines as well as to meet certain shock testing specification. The machine can generate a double-pulse acceleration shock for test articles according to specification defined in BV043/85. On the basis of the impact theory, a nonlinear dynamic model of the hydraulically-actuated test machine is established with thorough analysis on its mechanism which involves conversion of gas potential energy and dissipation of kinetic energy. Simulation results have demonstrated that the machine can produce a double-pulse acceleration shock in the time domain or a desired shock response spectrum in the frequency domain, which sets a theoretical base for the construction of the proposed machine.
基金The work was partially supported by the Major State Basic Research Development Program of China (No. 2002CB412703).
文摘The transmission ratio along the radian direction normal to the joints was studied in the Universal Distinct Element Code (UDEC). The variation of the transmission ratio with the ratio of joint spacing to wavelength was generalized into a general curve, which was determined by two critical points. The relationship between the two critical points and the affecting factors, quantity of joints and the normalized normal stiffness of joints, were obtained. A prediction model of the transmission ratio in the radian direction normal to the joints was proposed. The proposed model was applied to a field explosion test. The estimated values of the peak particle velocity from the prediction model were compared with the field records. The comparisons showed that the prediction model of the transmission ratio in the direction normal to the joints in the process of 2-D compressional wave propagation through multiple parallel joints is reliable.
文摘This paper pays attention to the analysis of overall macroscopic process of wavemaking induced by explosion. Based on establishing the simplified model and MAC method, the numerical simulations for formulating crater induced by touching water surface explosion, the bubble jumping out of the water surface induced by underwater explosion as well as hollow column formation for large equivalent explosion etc were carried out. In order to predict the wave field, the scheme simulated by falling and evoluting of an ″equivalent cylinder″ were proposed. In addition to researching the wavemaking response in a harbour, two joining methods in time domain were presented. The results indicate that the model and numerical methods are feasible.