External Optical Feedback Induced Noise in DFB Fiber Laser Sensor System

External optical feedback effects due to reflection, Rayleigh backscattering and coherent Rayleigh backseattering in fiber distributed feedback （DFB） fiber laser sensor system have been investigated. If the feedback intensity exceeds critical amount, excess noise would be induced in the demodulator. The maximum tolerable intensity back-reflection coefficient Rc and backscattering coefficient Sc into a fiber DFB laser with lead fiber length from I m to 37.5 km before the onset of instabilities are shown. Rc is found to decrease with increasing lead fiber length while Sc was relatively invariable with varying fiber length. The coherent Rayleigh backscattering （CRBS） would induce neglectable noise with a lead fiber exceeding 13.5 kin. To eliminate these noises, one or two isolators should be incorporated in the system.

Cavity-Mode Properties of Semiconductor Lasers Operating in Strong-Feedback Regime

This paper investigates the modal properties of semiconductor lasers operating in the strong-feedback regime. Analytical expressions are developed based on an iterative travelling-wave model, which enable a complete and quantitative description of a compound cavity mode in its steady state. Additional information is provided about the physical inside into a compound laser system, such as a bifurcation diagram of the compound cavity modes for full variation range （from 0 to 1） of the external reflection coefficient and a more general shape for the diagram of photon density versus mode phase - this latter will reduce to the classical ＂ellipse＂ in the weak-feedback regime. It is shown that in the strong-feedback regime, a feedback laser is characterized by a small mode number and a high density of photons. This behavior confirms previous experimental observations, showing that beyond the coherence-collapse regime, the compound laser system could be re-stabilized, and that as a result power-enhanced low-noise stable laser operation with quasi-uniform pulsation is possible with external-mirror reflectivity close to 1. Moreover, it is also shown that for a compound system operating in the strong-feedback regime, an anti-reflection treatment of a laser can significantly reduce its current threshold, and that in the absence of this treatment excitation of a minimum-linewidth mode with higher output power would be possible inside such a system. Finally, it is shown that in the weak-feedback regime except for a phase shift the iterative travelling-wave model will reduce to the Lang-Kobayashi model in cases where the product of the feedback rate and the internal round-trip time is much less than unity （that would mean in situations of as-cleaved lasers）.

Polarization full feedback external cavity of open loop spectral beam combining based on multi-single emitters laser diode

In this paper,a spectral beam combining(SBC)structure of multi-single emitters laser diode based on a polarization full feedback(PFF)external cavity is proposed and demonstrated.The maximum combining efficiency is 75.6%,which leads to an output power of 38.48 W,a degree of polarization(DOP)of 99.42%,and electro-optical conversion efficiency of 35.63%under continuous wave operation at a current of 8 A.Compared to the conventional SBC,the output power,the combining efficiency,the electro-optical conversion efficiency,and the DOP of the PFF-SBC structure present improvements of 5.73 W,11.26 percentage points,5.3 percentage points,and 7.26 percentage points,respectively.The results show that this SBC method can achieve a high efficiency and linearly polarized laser output of SBC,thereby making the subsequent polarization beam-combining efficiency approach the limit.

High-power narrow-linewidth diode laser pump source based on high-efficiency external cavity feedback technology

In this research,the highly efficient external cavity feedback technology based on volume Bragg grating(VBG)is studied.By using the structure of a fast axis collimating lens,the beam transformation system,a slow axis collimating lens,and VBG,the divergence angle of the fast and slow axes of the diode laser incident on the VBG is reduced effectively,and the feedback efficiency of the external cavity is improved.Combined with beam combining technology,fiber coupling technology,and precision temperature control technology,a high-power and narrow-linewidth diode laser pump source of kilowatt class is realized for alkali metal vapor laser pumping.The core diameter of the optical fiber is 1000μm,the numerical aperture is 0.22,the output power from the fiber is 1013 W,the fiber coupling efficiency exceeds 89%,and the external cavity efficiency exceeds 91%.The central wavelength is 852.052 nm(in air),which is tunable from 851.956 nm to 852.152 nm,and the spectral linewidth is 0.167 nm.Research results can be used for cesium alkali metal vapor laser pumping.