Single-layer reticulated dome structure are commonly high-profile building in the public and can be attractive targets for terrorist bombings,so the public can benefit from enhanced safety with a stronger understandin...Single-layer reticulated dome structure are commonly high-profile building in the public and can be attractive targets for terrorist bombings,so the public can benefit from enhanced safety with a stronger understanding of the behavior of single-layer reticulated dome structure under explosion.This paper investigates the fluid-structure interaction process and the dynamic response performance of the singlelayer reticulated dome under external blast load.Both experimental and numerical results shown that structural deformation is remarkably delayed compared with the velocity of blast wave,which advises the dynamic response of large-span reticulated dome structure has a negligible effect on the blast wave propagation under explosion.Four failure modes are identified by comparing the plastic development of each ring and the residual spatial geometric of the structure,i.e.,minor vibration,local depression,severe damage,and overall collapse.The plastic deformation energy and the displacement potential energy of the structure are the main consumers of the blast energy.In addition,the stress performance of the vertex member and the deep plastic ratio of the whole structure can serve as qualitative indicators to distinguish different failure modes.展开更多
Taking the chock shield supports as the object of study, methods formeasuring and calculating the external load of powered supports were discussed. Selecting the angleparameters as variables, the simple formulae of in...Taking the chock shield supports as the object of study, methods formeasuring and calculating the external load of powered supports were discussed. Selecting the angleparameters as variables, the simple formulae of interactive computation with respect to the workangles of a powered support were deduced and verified by an example. Furthermore, the formulaedetermining the magnitude, direction and action point of the external load were put forward. Theinvestigation results have provided a sound basis for the software design of the intelligentinstrument for load measuring of powered supports.展开更多
In this study,a micro in-plane p-type thermoelectric generator(TEG),which consists of thin-film Si_(1-x-y)Ge_(x)Sn_(y) ternary alloy semiconductor on insulator,is developed to make efficient use of waste heat such as ...In this study,a micro in-plane p-type thermoelectric generator(TEG),which consists of thin-film Si_(1-x-y)Ge_(x)Sn_(y) ternary alloy semiconductor on insulator,is developed to make efficient use of waste heat such as human body.A power factor value as high as 1095 mWm^(-1) K^(-2) had been achieved using Bion implanted and short-term rapid thermal annealing(RTA)process.In addition,a measuring scheme for micro TEG without external load resistance was designed.In one measuring session,multiple parameters can be measured.The micro single-arm TEG prepared by semiconductor process can output 0.29 nW power at a temperature difference of 15 K,and a cross-sectional power density has reached up to 0.58 mW/cm^(2),which is a superior value for wearable device.The findings of this study have important reference value for wearable device performance improvement and output power measuring of micro TEG.展开更多
Owing to their inherent great flexibility, good compliance, excellent adaptability, and safe interactivity, soft robots have shown great application potential. The advantages of light weight, high efficiency, non-poll...Owing to their inherent great flexibility, good compliance, excellent adaptability, and safe interactivity, soft robots have shown great application potential. The advantages of light weight, high efficiency, non-polluting characteristic, and environmental adaptability provide pneumatic soft robots an important position in the field of soft robots. In this paper, a soft robot with 10 soft modules, comprising three uniformly distributed endoskeleton pneumatic artificial muscles, was developed. The robot can achieve flexible motion in 3D space. A novel kinematic modeling method for variable-curvature soft robots based on the minimum energy method was investigated, which can accurately and efficiently analyze forward and inverse kinematics. Experiments show that the robot can be controlled to move to the desired position based on the proposed model. The prototype and modeling method can provide a new perspective for soft robot design, modeling, and control.展开更多
基金financial support from the China Postdoctora Science Foundation(project No.2021M690406)financial supports from the National Natural Science Foundation of China(project No.51708521,51778183)。
文摘Single-layer reticulated dome structure are commonly high-profile building in the public and can be attractive targets for terrorist bombings,so the public can benefit from enhanced safety with a stronger understanding of the behavior of single-layer reticulated dome structure under explosion.This paper investigates the fluid-structure interaction process and the dynamic response performance of the singlelayer reticulated dome under external blast load.Both experimental and numerical results shown that structural deformation is remarkably delayed compared with the velocity of blast wave,which advises the dynamic response of large-span reticulated dome structure has a negligible effect on the blast wave propagation under explosion.Four failure modes are identified by comparing the plastic development of each ring and the residual spatial geometric of the structure,i.e.,minor vibration,local depression,severe damage,and overall collapse.The plastic deformation energy and the displacement potential energy of the structure are the main consumers of the blast energy.In addition,the stress performance of the vertex member and the deep plastic ratio of the whole structure can serve as qualitative indicators to distinguish different failure modes.
文摘Taking the chock shield supports as the object of study, methods formeasuring and calculating the external load of powered supports were discussed. Selecting the angleparameters as variables, the simple formulae of interactive computation with respect to the workangles of a powered support were deduced and verified by an example. Furthermore, the formulaedetermining the magnitude, direction and action point of the external load were put forward. Theinvestigation results have provided a sound basis for the software design of the intelligentinstrument for load measuring of powered supports.
基金supported by PRESTO(Grant No.JPMJPR15R2)and CREST(Grant No.JPMJCR19Q5)from the JST in Japan,a research grant(Creation of Life Innovation Materials for Interdisciplinary and International Researcher Development)from the MEXT in Japan,the National Natural Science Foundation of China(Grant Nos.51772056,51961011,52061009)+2 种基金National Key Research and Development Program of China(No.2017YFE0198000)Guangxi Natural Science Foundation of China(Grant No.2019GXNSFAA245039,2017 GXNSFFA198015)the open foundation of Guangxi Key laboratory of Processing for Nonferrous Metals and Featured Materials,Guangxi University(Grant No.2020GXYSOF11).
文摘In this study,a micro in-plane p-type thermoelectric generator(TEG),which consists of thin-film Si_(1-x-y)Ge_(x)Sn_(y) ternary alloy semiconductor on insulator,is developed to make efficient use of waste heat such as human body.A power factor value as high as 1095 mWm^(-1) K^(-2) had been achieved using Bion implanted and short-term rapid thermal annealing(RTA)process.In addition,a measuring scheme for micro TEG without external load resistance was designed.In one measuring session,multiple parameters can be measured.The micro single-arm TEG prepared by semiconductor process can output 0.29 nW power at a temperature difference of 15 K,and a cross-sectional power density has reached up to 0.58 mW/cm^(2),which is a superior value for wearable device.The findings of this study have important reference value for wearable device performance improvement and output power measuring of micro TEG.
基金the National Natural Science Foundation of China(Grant Nos.51975566,61821005,and U1908214)the Key Research Program of Frontier Sciences,CAS,China(Grant No.ZDBS-LY-JSC011).
文摘Owing to their inherent great flexibility, good compliance, excellent adaptability, and safe interactivity, soft robots have shown great application potential. The advantages of light weight, high efficiency, non-polluting characteristic, and environmental adaptability provide pneumatic soft robots an important position in the field of soft robots. In this paper, a soft robot with 10 soft modules, comprising three uniformly distributed endoskeleton pneumatic artificial muscles, was developed. The robot can achieve flexible motion in 3D space. A novel kinematic modeling method for variable-curvature soft robots based on the minimum energy method was investigated, which can accurately and efficiently analyze forward and inverse kinematics. Experiments show that the robot can be controlled to move to the desired position based on the proposed model. The prototype and modeling method can provide a new perspective for soft robot design, modeling, and control.