Differential Genotoxicity of the Crude Leaf Extract of a Medicinal Plant, Casearia tomentosa

The genotoxic potentiality of the crude leaf extract of Casearia tomentosa, a medicinal preparation, has been evaluated in Swiss albino mice. The extract significantly induced the division_disruptive chromosomal changes in bone marrow cells as well as in primary spermatocytes; the latter also exhibited marked increase in synaptic disruptions. A significant decrease in sperm count was noted. The incidence of structural damages in chromosomes, however, remained within the range of control level frequency. This herbal preparation, therefore, appears to be primarily spindle_poisoning in its action, but not clastogenic. The probable mechanism of this differential genotoxicity is discussed.

Evaluation of the intracellular lipid-lowering effect of polyphenols extract from highland barley in HepG2 cells

Active ingredients from highland barley have received considerable attention as natural products for developing treatments and dietary supplements against obesity.In practical application,the research of food combinations is more significant than a specific food component.This study investigated the lipid-lowering effect of highland barley polyphenols via lipase assay in vitro and HepG2 cells induced by oleic acid(OA).Five indexes,triglyceride(TG),total cholesterol(T-CHO),low density lipoprotein-cholesterol(LDL-C),aspartate aminotransferase(AST),and alanine aminotransferase(ALT),were used to evaluate the lipidlowering effect of highland barley extract.We also preliminary studied the lipid-lowering mechanism by Realtime fluorescent quantitative polymerase chain reaction(q PCR).The results indicated that highland barley extract contains many components with lipid-lowering effects,such as hyperoside and scoparone.In vitro,the lipase assay showed an 18.4%lipase inhibition rate when the additive contents of highland barley extract were 100μg/m L.The intracellular lipid-lowering effect of highland barley extract was examined using 0.25 mmol/L OA-induced HepG2 cells.The results showed that intracellular TG,LDL-C,and T-CHO content decreased by 34.4%,51.2%,and 18.4%,respectively.ALT and AST decreased by 51.6%and 20.7%compared with the untreated hyperlipidemic HepG2 cells.q PCR results showed that highland barley polyphenols could up-regulation the expression of lipid metabolism-related genes such as PPARγand Fabp4.

A Review on Sources,Extractions and Analysis Methods of a Sustainable Biomaterial:Tannins

Condensed and hydrolysable tannins are non-toxic natural polyphenols that are a commercial commodity industrialized for tanning hides to obtain leather and for a growing number of other industrial applications mainly to substitute petroleum-based products.They are a definite class of sustainable materials of the forestry industry.They have been in operation for hundreds of years to manufacture leather and now for a growing number of applications in a variety of other industries,such as wood adhesives,metal coating,pharmaceutical/medical applications and several others.This review presents the main sources,either already or potentially commercial of this forestry by-materials,their industrial and laboratory extraction systems,their systems of analysis with their advantages and drawbacks,be these methods so simple to even appear primitive but nonetheless of proven effectiveness,or very modern and instrumental.It constitutes a basic but essential summary of what is necessary to know of these sustainable materials.In doing so,the review highlights some of the main challenges that remain to be addressed to deliver the quality and economics of tannin supply necessary to fulfill the industrial production requirements for some materials-based uses.

Preferentially selective extraction of lithium from spent LiCoO_(2)cathodes by medium-temperature carbon reduction roasting

Lithium recovery from spent lithium-ion batteries(LIBs)have attracted extensive attention due to the skyrocketing price of lithium.The medium-temperature carbon reduction roasting was proposed to preferential selective extraction of lithium from spent Li-CoO_(2)(LCO)cathodes to overcome the incomplete recovery and loss of lithium during the recycling process.The LCO layered structure was destroyed and lithium was completely converted into water-soluble Li2CO_(3)under a suitable temperature to control the reduced state of the cobalt oxide.The Co metal agglomerates generated during medium-temperature carbon reduction roasting were broken by wet grinding and ultrasonic crushing to release the entrained lithium.The results showed that 99.10%of the whole lithium could be recovered as Li2CO_(3)with a purity of 99.55%.This work provided a new perspective on the preferentially selective extraction of lithium from spent lithium batteries.

Automatic Extraction Method of 3D Feature Guidelines for Complex Cultural Relic Surfaces Based on Point Cloud

Cultural relics line graphic serves as a crucial form of traditional artifact information documentation,which is a simple and intuitive product with low cost of displaying compared with 3D models.Dimensionality reduction is undoubtedly necessary for line drawings.However,most existing methods for artifact drawing rely on the principles of orthographic projection that always cannot avoid angle occlusion and data overlapping while the surface of cultural relics is complex.Therefore,conformal mapping was introduced as a dimensionality reduction way to compensate for the limitation of orthographic projection.Based on the given criteria for assessing surface complexity,this paper proposed a three-dimensional feature guideline extraction method for complex cultural relic surfaces.A 2D and 3D combined factor that measured the importance of points on describing surface features,vertex weight,was designed.Then the selection threshold for feature guideline extraction was determined based on the differences between vertex weight and shape index distributions.The feasibility and stability were verified through experiments conducted on real cultural relic surface data.Results demonstrated the ability of the method to address the challenges associated with the automatic generation of line drawings for complex surfaces.The extraction method and the obtained results will be useful for line graphic drawing,displaying and propaganda of cultural relics.

Effects of conductive agent type on lithium extraction from salt lake brine with LiFePO_(4) electrodes

Electrochemical lithium extraction from salt lakes is an effective strategy for obtaining lithium at a low cost.Nevertheless,the elevated Mg:Li ratio and the presence of numerous coexisting ions in salt lake brines give rise to challenges,such as prolonged lithium extraction periods,diminished lithium extraction efficiency,and considerable environmental pollution.In this work,Li FePO4(LFP)served as the electrode material for electrochemical lithium extraction.The conductive network in the LFP electrode was optimized by adjusting the type of conductive agent.This approach resulted in high lithium extraction efficiency and extended cycle life.When the single conductive agent of acetylene black(AB)or multiwalled carbon nanotubes(MWCNTs)was replaced with the mixed conductive agent of AB/MWCNTs,the average diffusion coefficient of Li+in the electrode increased from 2.35×10^(-9)or 1.77×10^(-9)to 4.21×10^(-9)cm^(2)·s^(-1).At the current density of 20 mA·g^(-1),the average lithium extraction capacity per gram of LFP electrode increased from 30.36 mg with the single conductive agent(AB)to 35.62 mg with the mixed conductive agent(AB/MWCNTs).When the mixed conductive agent was used,the capacity retention of the electrode after 30 cycles reached 82.9%,which was considerably higher than the capacity retention of 65.8%obtained when the single AB was utilized.Meanwhile,the electrode with mixed conductive agent of AB/MWCNTs provided good cycling performance.When the conductive agent content decreased or the loading capacity increased,the electrode containing the mixed conductive agent continued to show excellent electrochemical performance.Furthermore,a self-designed,highly efficient,continuous lithium extraction device was constructed.The electrode utilizing the AB/MWCNT mixed conductive agent maintained excellent adsorption capacity and cycling performance in this device.This work provides a new perspective for the electrochemical extraction of lithium using LFP electrodes.

Influence of ion species on extraction characteristicsof mixed ion beams

The spatial distributions of different kinds of ions are usually not completely the same in the process of extracting.In order to study the reason for the different characteristics of ion extraction, a simplified simulation model of Cu+ andCr+ ions extraction process was established by 2D3V (two-dimensional in space and three- dimensional in velocity space)particle-in-cell (PIC) method. The effects of different extraction voltages from 0 V to 500 V on the density distribution ofCu+ and Cr+ ions and the change of plasma emission surface were analyzed. On the basis of this model, the ion densitydistribution characteristics of Cu+ ions mixed with Li+, Mg+, K+, Fe+, Y+, Ag+, Xe+, Au+, and Pb+ ions respectivelyunder 200-V extraction voltage are further simulated, and it is revealed that the atomic mass of the ions is the key reason fordifferent ion density distributions when different kinds of ions are mixed and extracted, which provides support for furtherunderstanding of ion extraction characteristics.

Environmental,economic and exergy analysis of separation of ternary azeotrope by variable pressure extractive distillation based on multi-objective optimization

In this work,the ternary azeotrope of tert-butyl alcohol/ethyl acetate/water is separated by extractive distillation(ED)to recover the available constituents and protect the environment.Based on the conductor like shielding model and relative volatility method,ethylene glycol was selected as the extractant in the separation process.In addition,in view of the characteristic that the relative volatility between components changes with pressure,the multi-objective optimization method based on nondominated sorting genetic algorithm II optimizes the pressure and the amount of solvent cooperatively to avoid falling into the optimal local solution.Based on the optimal process parameters,the proposed heat-integrated process can reduce the gas emissions by 29.30%.The heat-integrated ED,further coupled with the pervaporation process,can reduce gas emission by 42.36%and has the highest exergy efficiency of 47.56%.In addition,based on the heat-integrated process,the proposed two heat pump assisted heat-integrated ED processes show good economic and environmental performance.The double heat pump assisted heat-integrated ED can reduce the total annual cost by 28.78%and the gas emissions by 55.83%compared with the basis process,which has a good application prospect.This work provides a feasible approach for the separation of ternary azeotropes.

Highly selective extraction of aromatics from aliphatics by using metal chloride-based ionic liquids

The separation of aromatics from aliphatics is essential for achieving maximum exploitation of oil resources in the petrochemical industry.In this study,a series of metal chloride-based ionic liquids were prepared and their performances in the separation of 1,2,3,4-tetrahydronaphthalene(tetralin)/dodecane and tetralin/decalin systems were studied.Among these ionic liquids,1-ethyl-3-methylimidazolium tetrachloroferrate([EMIM][FeCl_(4)])with the highest selectivity was used as the extractant.Density functional theory calculations showed that[EMIM][FeCl_(4)]interacted more strongly with tetralin than with dodecane and decalin.Energy decomposition analysis of[EMIM][FeCl_(4)]-tetralin indicated that electrostatics and dispersion played essential roles,and induction cannot be neglected.The van der Waals forces was a main effect in[EMIM][FeCl_(4)]-tetralin by independent gradient model analysis.The tetralin distribution coefficient and selectivity were 0.8 and 110,respectively,with 10%(mol)tetralin in the initial tetralin/dodecane system,and 0.67 and 19.5,respectively,with 10%(mol)tetralin in the initial tetralin/decalin system.The selectivity increased with decreasing alkyl chain length of the extractant.The influence of the extraction temperature,extractant dosage,and initial concentrations of the system components on the separation performance were studied.Recycling experiments showed that the regenerated[EMIM][FeCl_(4)]could be used repeatedly.

Influence of extraction voltage on electron and ion behavior characteristics

The characteristics of the extracted ion current have a significant impact on the design and testing of ion source performance.In this paper,a 2D in space and 3D in velocity space particle in cell(2D3V PIC)method is utilized to simulate plasma motion and ion extraction characteristics under various initial plasma velocity distributions and extraction voltages in a Cartesian coordinate system.The plasma density is of the order of 10^(15)m^(-3)-10^(16)m^(-3)and the extraction voltage is of the order of 100 V-1000 V.The study investigates the impact of various extraction voltages on the velocity and density distributions of electrons and positive ions,and analyzes the influence of different initial plasma velocity distributions on the extraction current.The simulation results reveal that the main reason for the variation of extraction current is the spacecharge force formed by the relative aggregation of positive and negative net charges.This lays the foundation for a deeper understanding of extraction beam characteristics.

Effect of Rosmarinus officinalis and Origanum majorana extracts on stability of sunflower oil during storage and repeated heating

Both rosemary(Rosmarinus officinalis)and marjoram(Origanum majorana)are abundant in phenolic compounds,exhibiting exceptional antioxidant activity.This study aims to assess the impact of rosemary and marjoram extracts on the stability of sunflower oil during storage and repeated heating.Sunflower oil supplemented with herbal extracts or butylated hydroxytoluene(BHA)at a concentration of 200 ppm was stored for six months under light and dark conditions at room temperature.Peroxide value(PV),p-anisidine value(An-V),and total oxidation(TOTOX)value were measured to monitor lipid oxidation progression.A significant difference(P<0.05)was observed between light and dark storage for all studied samples regarding oxidation parameters.The ethanolic extract of rosemary exhibited higher antioxidant activity compared to BHA and other extracts.Furthermore,sunflower oil supplemented with the ethanolic extract of rosemary underwent weekly treatment at 100℃for 30 min over four consecutive weeks.Although all oxidation indicators increased during repeated heating,the addition of rosemary and marjoram extracts as well as BHA significantly reduced these indicators.These findings demonstrate that both rosemary extracts and marjoram extracts can serve as natural antioxidants in edible oils.

Supplementation of vitamin E or a botanical extract as antioxidants to improve growth performance and health of growing pigs housed under thermoneutral or heat-stressed conditions

Background Heat stress has severe negative consequences on performance and health of pigs,leading to significant economic losses.The objective of this study was to investigate the effects of supplemental vitamin E and a botanical extract in feed or drinking water on growth performance,intestinal health,and oxidative and immune status in grow-ing pigs housed under heat stress conditions.Methods Duplicate experiments were conducted,each using 64 crossbred pigs with an initial body weight of 50.7±3.8 and 43.9±3.6 kg and age of 13-week and 12-week,respectively.Pigs(n=128)were housed individually and assigned within weight blocks and sex to a 2×4 factorial arrangement consisting of 2 environments(thermo-neutral(21.2℃)or heat-stressed(30.9℃))and 4 supplementation treatments(control diet;control+100 IU/L of D-α-tocopherol in water;control+200 IU/kg of DL-α-tocopheryl-acetate in feed;or control+400 mg/kg of a botanical extract in feed).Results Heat stress for 28 d reduced(P≤0.001)final body weight,average daily gain,and average daily feed intake(-7.4 kg,-26.7%,and-25.4%,respectively)but no effects of supplementation were detected(P>0.05).Serum vitamin E increased(P<0.001)with vitamin E supplementation in water and in feed(1.64 vs.3.59 and 1.64 vs.3.24),but not for the botanical extract(1.64 vs.1.67 mg/kg)and was greater when supplemented in water vs.feed(P=0.002).Liver vitamin E increased(P<0.001)with vitamin E supplementations in water(3.9 vs.31.8)and feed(3.9 vs.18.0),but not with the botanical extract(3.9 vs.4.9 mg/kg).Serum malondialdehyde was reduced with heat stress on d 2,but increased on d 28(interaction,P<0.001),and was greater(P<0.05)for antioxidant supplementation compared to control.Cellular proliferation was reduced(P=0.037)in the jejunum under heat stress,but increased in the ileum when vitamin E was supplemented in feed and water under heat stress(interaction,P=0.04).Tumor necrosis factor-αin jejunum and ileum mucosa decreased by heat stress(P<0.05)and was reduced by vitamin E sup-plementations under heat stress(interaction,P<0.001).Conclusions The addition of the antioxidants in feed or in drinking water did not alleviate the negative impact of heat stress on feed intake and growth rate of growing pigs.

Design method of extractant for liquid-liquid extraction based on elements and chemical bonds

In the petrochemical industry process, the relative volatility between the components to be separated is close to one or the azeotrope that systems are difficult to separate. Liquid-liquid extraction is a common and effective separation method, and selecting an extraction agent is the key to extraction technology research. In this paper, a design method of extractants based on elements and chemical bonds was proposed. A knowledge-based molecular design method was adopted to pre-select elements and chemical bond groups. The molecules were automatically synthesized according to specific combination rules to avoid the problem of “combination explosion” of molecules. The target properties of the extractant were set, and the extractant meeting the requirements was selected by predicting the correlation physical properties of the generated molecules. Based on the separation performance of the extractant in liquid-liquid extraction and the relative importance of each index, the fuzzy comprehensive evaluation membership function was established, the analytic hierarchy process determined the mass ratio of each index, and the consistency test results were passed. The results of case study based on quantum chemical analysis demonstrated that effective determination of extractants for the analysis of benzene-cyclohexane systems. The results unanimously prove that the method has important theoretical significance and application value.

A bulk extraction method to determine the stable isotope ratios of iron,nickel,copper,zinc,and cadmium in seawater using multi-collector inductively coupled plasma mass spectrometry

The oceanic trace metals iron(Fe),nickel(Ni),copper(Cu),zinc(Zn),and cadmium(Cd)are crucial to marine phytoplankton growth and global carbon cycle,and the analysis of their stable isotopes can provide valuable insights into their biogeochemical cycles within the ocean.However,the simultaneous isotopic analysis of multiple elements present in seawater is challenging because of their low concentrations,limited volumes of the test samples,and high salt matrix.In this study,we present the novel method developed for the simultaneous analysis of five isotope systems by 1 L seawater sample.In the developed method,the NOBIAS Chelate-PA1 resin was used to extract metals from seawater,the AG MP-1M anion-exchange resin to purify Cu,Fe,Zn,Cd,and the NOBIAS Chelate-PA1 resin to further extract Ni from the matrix elements.Finally,a multi-collector inductively coupled plasma mass spectroscope(MC-ICPMS)was employed for the isotopic measurements using a doublespike technique or sample-standard bracketing combined with internal normalization.This method exhibited low total procedural blanks(0.04 pg,0.04 pg,0.21 pg,0.15 pg,and 3 pg for Ni,Cu,Fe,Zn,and Cd,respectively)and high extraction efficiencies(100.5%±0.3%,100.2%±0.5%,97.8%±1.4%,99.9%±0.8%,and 100.1%±0.2%for Ni,Cu,Fe,Zn,and Cd,respectively).The external errors and external precisions of this method could be considered negligible.The proposed method was further tested on the seawater samples obtained from the whole vertical profile of a water column during the Chinese GEOTRACES GP09 cruise in the Northwest Pacific,and the results showed good agreement with previous related data.This innovative method will contribute to the advancement of isotope research and enhance our understanding of the marine biogeochemical cycling of Fe,Ni,Cu,Zn,and Cd.

Dietary Macleaya cordata extract supplementation improves the growth performance and gut health of broiler chickens with necrotic enteritis

Background The poultry industry needs effective antibiotic alternatives to control outbreaks of necrotic enteritis(NE)caused by Clostridium perfringens.Methods The aim of this study was to investigate the effects of dietary supplementation with Macleaya cordata extract(MCE)on the immune function and gut microbiota of broilers with NE.A total of 2881-day-old broiler chicks were randomly assigned to a 2×2 factorial arrangement with two concentrations of dietary MCE supplementation(0 or 350 mg/kg of diet)and two disease challenge statuses(control or NE).Results The results revealed that NE significantly increased the feed conversion rate(FCR),mortality,intestinal lesion score,the levels of IL-1β,IL-17 and IFN-γ/IL-4 in serum and IL-17/IL-10 in the jejunal mucosa,m RNA levels of TLR2,IFN-γand p Ig R in the jejunum,and Clostridium perfringens concentrations in the cecum.NE significantly decreased the body weight(BW),body weight gain(BWG),jejunal villus height,V/C,m RNA level of AMPK-α1 in jejunum,IL-4 level in the jejunal mucosa and lactic acid bacteria abundance in the cecum.MCE significantly increased BW,BWG,jejunal villus height,V/C,m RNA levels of occludin,ZO-1 and AMPK-α1 in the jejunum,the levels of Ig A and Ig G in serum and IL-10 in the jejunal mucosa and m RNA levels of NF-κB,IL-10 and MHC-II in the jejunum.Additionally,MCE significantly decreased the FCR,mortality,intestinal lesion score,jejunal crypt depth,the levels of IFN-γand IL-17 in serum and IL-17/IL-10 in the jejunal mucosa,Clostridium perfringens concentrations in the cecum,and m RNA levels of IL-17/IL-10 in the jejunum.Moreover,NE significantly increased the abundance of bacteria that are associated with inflammation,obesity and depression(Alistipes,Barnesiella,Intestinimonas,RF39 and UCG-005)and significantly decreased the abundance of short-chain fatty acid(SCFA)-producing bacteria(Anaerotruncus,Butyricicoccus and Bacteroides)in the cecum.MCE significantly increased the abundance of SCFA-producing bacteria(Streptococcus,Ruminococcus_torques_group and Lachnospiraceae_NK4A136_group)and significantly reduced the abundance of bacteria that are associated with inflammation and obesity(Alistipes,Barnesiella and UCG-010)in the cecum.In the cecum of broilers with NE,the relative abundance of Barnesiella and Alistipes was higher and that of Lachnoclostridium and Shuttleworthia was lower.Interestingly,these trends were reversed by the addition of MCE to the diet.Spearman correlation analysis showed that Barnesiella and Alistipes were associated with enhanced intestinal inflammation and inhibited growth performance,whereas Lachnoclostridium and Shuttleworthia were associated with anti-inflammatory effects.Conclusions MCE ameliorated the loss of growth performance in broiler chickens with NE,probably by regulating the intestinal barrier,immune function,and gut microbiota.

Upper-rim-modified thioether thiacalix[4]arene used for liquid-liquid extraction of Au(Ⅲ)and Pd(Ⅱ)in hydrochloric acid medium

Gold(Au)and palladium(Pd)play an increasing role in the production and human life;Therefore,it is of great significance to study their recovery.A 5,11,17,23-tetra-ethylthio-25,26,27,28-tetra-hydroxyl thiacalix[4]arene(TCAET)was synthesized specifically for the capture of Au(Ⅲ)and Pd(Ⅱ)from HCl medium by liquid-liquid extraction.In a 0.1 mol·L^(-1)HCl medium,the transfer of Au(Ⅲ)and Pd(Ⅱ)from the aqueous phase to the organic phase was highly efficient,with a transfer ratio of 100%for Au(Ⅲ)and 98%for Pd(Ⅱ).Furthermore,the extraction equilibrium time for Au(Ⅲ)was just 5 min.Job's method data demonstrated that TCAET formed complexes with Au(Ⅲ)and Pd(Ⅱ)in a ratio of 2:3 and 1:1,respectively,during the extraction process.TCAET showed high selectivity toward Pd(Ⅱ)and Au(Ⅲ)over other competing metal ions.Moreover,both Au(Ⅲ)and Pd(Ⅱ)could be successfully stripped from the loaded organic phases with a 1.0 mol·L^(-1)thiourea in 0.5 mol·L^(-1)HCl and 0.5 mol·L^(-1)thiourea in 0.5 mol·L^(-1)HCl,respectively.Results obtained from five consecutive extraction-stripping cycles showed good reusability of TCAET toward Au(Ⅲ)and Pd(Ⅱ)recovery.The conclusion can provide a certain reference for thiacalixarene in the recovery of precious metal species.

Characteristics and mechanism of Ni^(2+)and Cd^(2+)adsorption by recovered perlite from agar extraction residue

Ni^(2+)and Cd^(2+)in wastewater accumulated through the ecological chain and could jeopardize human health.Adsorption of Ni^(2+)and Cd^(2+)from wastewater using recovered perlite was an important way to solve the problem of resource utilization of solid waste from agar production.Our previous study confirmed that recovered perlite from agar extraction residue had better pore size and specific surface area than commercial perlite.However,the adsorption efficiency and adsorption mechanism of recovered perlite were the main factors limiting its adsorption application.The adsorption process of Ni^(2+)and Cd^(2+)by recovered perlite in aqueous solution was described by the pseudo-second-order kinetic equation,and the relevant adsorption mechanism was mainly chemisorption.Compared with commercial perlite,the adsorption removal rate of Ni^(2+)and Cd^(2+)by enzymatic recovered perlite could reach 92.9%and 89.2%,respectively,and were improved by 12.63%and 13.03%.Langmuir isothermal adsorption model could better describe the isothermal adsorption process of recovered perlite on heavy metal Ni^(2+)and Cd^(2+),and the relevant adsorption mechanism was mainly monolayer adsorption.The X-ray photoelectron spectroscopy(XPS)results indicated that the decrease of Si—O Si^(2+)hydroxyl coordination bond and the increase of C—Si bond might make the binding effect of recovered perlite with heavy metals stronger.The competitive adsorption of Ni^(2+)and Cd^(2+)by recovered perlite was still dominated by chemisorption and monolayer adsorption.This study was expected to provide a theoretical basis and technical support for the removal of Ni^(2+)and Cd^(2+)from wastewater using recovered perlite from seaweed residue.

Ethanol extract of Abelmoschus manihot suppresses endoplasmic reticulum stress in contrast-induced nephropathy

Objective:To explore the efficacy and potential mechanisms of the ethanol extract of Abelmoschus manihot(L.)Medic in contrast-induced nephropathy(CIN).Methods:CIN rat models and human renal proximal tubular cells(HK-2)with iopromide-induced injury were employed to mimic CIN conditions.The effect of Abelmoschus manihot extract on the rat models and HK-2 cells was evaluated.In rat models,kidney function,histology,oxidative stress and apoptosis were determined.In HK-2 cells,cell viability,apoptosis,mitochondrial membrane potential,and endoplasmic reticulum stress were assessed.Results:Abelmoschus manihot extract significantly improved structural and functional impairments in the kidneys of CIN rats.Additionally,the extract effectively mitigated the decline in cellular viability and reduced iopromide-induced oxidative stress and lipid peroxidation.Mechanistic investigations revealed that Abelmoschus manihot extract prominently attenuated acute endoplasmic reticulum stress-mediated apoptosis by downregulating GRP78 and CHOP protein levels.Conclusions:Abelmoschus manihot extract can be used as a promising therapeutic and preventive agent in the treatment of CIN.

Extraction of Acoustic Normal Mode Depth Functions Using Range-Difference Method with Vertical Linear Array Data

Data-derived normal mode extraction is an effective method for extracting normal mode depth functions in the absence of marine environmental data.However,when the corresponding singular vectors become nonunique when two or more singular values obtained from the cross-spectral density matrix diagonalization are nearly equal,this results in unsatisfactory extraction outcomes for the normal mode depth functions.To address this issue,we introduced in this paper a range-difference singular value decomposition method for the extraction of normal mode depth functions.We performed the mode extraction by conducting singular value decomposition on the individual frequency components of the signal's cross-spectral density matrix.This was achieved by using pressure and its range-difference matrices constructed from vertical line array data.The proposed method was validated using simulated data.In addition,modes were successfully extracted from ambient noise.

Online identification and extraction method of regional large-scale adjustable load-aggregation characteristics

This article introduces the concept of load aggregation,which involves a comprehensive analysis of loads to acquire their external characteristics for the purpose of modeling and analyzing power systems.The online identification method is a computer-involved approach for data collection,processing,and system identification,commonly used for adaptive control and prediction.This paper proposes a method for dynamically aggregating large-scale adjustable loads to support high proportions of new energy integration,aiming to study the aggregation characteristics of regional large-scale adjustable loads using online identification techniques and feature extraction methods.The experiment selected 300 central air conditioners as the research subject and analyzed their regulation characteristics,economic efficiency,and comfort.The experimental results show that as the adjustment time of the air conditioner increases from 5 minutes to 35 minutes,the stable adjustment quantity during the adjustment period decreases from 28.46 to 3.57,indicating that air conditioning loads can be controlled over a long period and have better adjustment effects in the short term.Overall,the experimental results of this paper demonstrate that analyzing the aggregation characteristics of regional large-scale adjustable loads using online identification techniques and feature extraction algorithms is effective.