The precondition of realizing feedback controlling DC DC converter to avoid chaotic state is to judge the behavior of the converter and take corresponding measures. In this paper, the output signals under different ci...The precondition of realizing feedback controlling DC DC converter to avoid chaotic state is to judge the behavior of the converter and take corresponding measures. In this paper, the output signals under different circuit parameters of the PWM buck converter have been analyzed. The method of using Fourier descriptor to extract output signals characteristics is put forward and proved to be a gist of identifying and classifying the behavior of DC DC converter. This method can establish a good foundation fo...展开更多
A mine-used multi-function serial signal converter is introduced.This converter is based on Ethernet.The core of this design is embedded microprocessor STM32F107VCT6.Embedded operation system μC/OS-Ⅱ is transplanted...A mine-used multi-function serial signal converter is introduced.This converter is based on Ethernet.The core of this design is embedded microprocessor STM32F107VCT6.Embedded operation system μC/OS-Ⅱ is transplanted into this converter,and light-weight Internet protocal （LwIP） stack is also embedded to realize mutual conversion of serial signals such as meter bus （M-Bus） signal,RS485 signal,RS232 signal and Ethernet signal.Interconnection between all kinds of monitoring system interfaces under coal mine can be formed easily,which can solve compatibility problem between monitoring system and communication system and improve overall performance of safety monitoring system.The designed multi-function serial signal converter is of great value for application,which is worthy to be popularized in coal mine safety production.展开更多
Microelectronic power converters such as buck and boost converter are required to be tolerant to radiations including electron radiation. This paper examines electron radiation effects on the Ⅰ-Ⅴ characteristics of ...Microelectronic power converters such as buck and boost converter are required to be tolerant to radiations including electron radiation. This paper examines electron radiation effects on the Ⅰ-Ⅴ characteristics of VDMOSFET and its corresponding effects in buck converter. Analysis of the electrical characteristics shows that after irradiation the threshold voltage and drain current for all VDMOSFETs degraded more than two orders of magnitude. The impact of this electrical degradation has been investigated in an application of typical buck converter circuit. The buck converter with n-channel switching transistor shows that after irradiation its output voltage increased with the drain current in the n-channel ZVN4424 A VDMOSFET, while the buck converter with p-channel switching transistor shows its output voltage decreased with the drain current in the p-channel ZVP4424 A VDMOSFET after irradiation.展开更多
This paper describes the development of a timer based voltage to frequency converter(V FC).Timer LM555is used in astable multivibrator mode with two OPTO-LDRs(light dependent resistors)in the circuitry.The frequency o...This paper describes the development of a timer based voltage to frequency converter(V FC).Timer LM555is used in astable multivibrator mode with two OPTO-LDRs(light dependent resistors)in the circuitry.The frequency of timer output waveform which is measured using a digital storage oscillator(DSO)is almost linearly proportional to the applied input voltage.Hence we obtain a linear relationship between the frequency of timer output waveform and the input voltage.Because of its quasi-digital output,the main advantages of this developed converter are linear input-output relationship,small size,easy portabilityand high cost performance.In addition,the timer output waveform can be directly interfaced with personal computer or microprocessor/microcontroller for further processing of the input voltage signal without intervening any analog-to-digital converter(ADC).展开更多
A discrete iterative map model of V^2C control boost converter was established to study the dynamical behaviors of the converter. By using parameter space map and bifurcation diagram, the effects of circuit parameters...A discrete iterative map model of V^2C control boost converter was established to study the dynamical behaviors of the converter. By using parameter space map and bifurcation diagram, the effects of circuit parameters on the bifurcation behaviors of V^2C control and current-mode control boost converters were analyzed. The phase portraits and time-domain waveforms of the V^2C control boost converter were obtained by Runge-Kutta algorithm through piecewise smooth switching model. The research results indicate that V^2C control boost converters can evolve into periodic and chaotic behaviors, and show weaker nonlinear behaviors than current-mode control boost converters.展开更多
基于模块化多电平换流器的高压柔性直流输电系统(modular multilevel converter-based high voltage direct current,MMC-HVDC)常采用双极接线方式以提高系统功率输送能力和可靠性。然而目前对于风电场经柔直外送系统的稳定性研究集中...基于模块化多电平换流器的高压柔性直流输电系统(modular multilevel converter-based high voltage direct current,MMC-HVDC)常采用双极接线方式以提高系统功率输送能力和可靠性。然而目前对于风电场经柔直外送系统的稳定性研究集中于单极接线方式,孤岛直驱风电场与采用不同双极协调控制的双极MMC-HVDC互联系统小信号稳定性问题还有待进一步探究。该文首先考虑频率耦合特性、参考系初相位和直流侧耦合特性的影响,分别建立了采用双U/f下垂控制和定U/f-P/Q控制的双极MMC-HVDC系统交流侧等效SISO阻抗模型,并详细分析了金属回线阻抗和双极间功率均分度对交流阻抗特性的影响。接着对比研究了两种协调控制中共有控制环路和特有控制环路对交流侧负电阻特性及互联系统稳定性的影响规律。最后,孤岛直驱风电场经两种双极协调控制下双极MMC-HVDC外送系统Matlab/Simulink时域仿真结果和硬件在环半实物实时仿真实验结果验证了所提出的小信号阻抗模型的精确性和稳定性分析结论的有效性。展开更多
文摘The precondition of realizing feedback controlling DC DC converter to avoid chaotic state is to judge the behavior of the converter and take corresponding measures. In this paper, the output signals under different circuit parameters of the PWM buck converter have been analyzed. The method of using Fourier descriptor to extract output signals characteristics is put forward and proved to be a gist of identifying and classifying the behavior of DC DC converter. This method can establish a good foundation fo...
文摘A mine-used multi-function serial signal converter is introduced.This converter is based on Ethernet.The core of this design is embedded microprocessor STM32F107VCT6.Embedded operation system μC/OS-Ⅱ is transplanted into this converter,and light-weight Internet protocal （LwIP） stack is also embedded to realize mutual conversion of serial signals such as meter bus （M-Bus） signal,RS485 signal,RS232 signal and Ethernet signal.Interconnection between all kinds of monitoring system interfaces under coal mine can be formed easily,which can solve compatibility problem between monitoring system and communication system and improve overall performance of safety monitoring system.The designed multi-function serial signal converter is of great value for application,which is worthy to be popularized in coal mine safety production.
基金funded by International Islamic University Malaysia(No.EDW B14-159-1044)
文摘Microelectronic power converters such as buck and boost converter are required to be tolerant to radiations including electron radiation. This paper examines electron radiation effects on the Ⅰ-Ⅴ characteristics of VDMOSFET and its corresponding effects in buck converter. Analysis of the electrical characteristics shows that after irradiation the threshold voltage and drain current for all VDMOSFETs degraded more than two orders of magnitude. The impact of this electrical degradation has been investigated in an application of typical buck converter circuit. The buck converter with n-channel switching transistor shows that after irradiation its output voltage increased with the drain current in the n-channel ZVN4424 A VDMOSFET, while the buck converter with p-channel switching transistor shows its output voltage decreased with the drain current in the p-channel ZVP4424 A VDMOSFET after irradiation.
文摘This paper describes the development of a timer based voltage to frequency converter(V FC).Timer LM555is used in astable multivibrator mode with two OPTO-LDRs(light dependent resistors)in the circuitry.The frequency of timer output waveform which is measured using a digital storage oscillator(DSO)is almost linearly proportional to the applied input voltage.Hence we obtain a linear relationship between the frequency of timer output waveform and the input voltage.Because of its quasi-digital output,the main advantages of this developed converter are linear input-output relationship,small size,easy portabilityand high cost performance.In addition,the timer output waveform can be directly interfaced with personal computer or microprocessor/microcontroller for further processing of the input voltage signal without intervening any analog-to-digital converter(ADC).
基金The National Natural Science Foundation of China (No.50677056)the Natural Science Foundations of Jiangsu Province (No.BK2009105)
文摘A discrete iterative map model of V^2C control boost converter was established to study the dynamical behaviors of the converter. By using parameter space map and bifurcation diagram, the effects of circuit parameters on the bifurcation behaviors of V^2C control and current-mode control boost converters were analyzed. The phase portraits and time-domain waveforms of the V^2C control boost converter were obtained by Runge-Kutta algorithm through piecewise smooth switching model. The research results indicate that V^2C control boost converters can evolve into periodic and chaotic behaviors, and show weaker nonlinear behaviors than current-mode control boost converters.
文摘基于模块化多电平换流器的高压柔性直流输电系统(modular multilevel converter-based high voltage direct current,MMC-HVDC)常采用双极接线方式以提高系统功率输送能力和可靠性。然而目前对于风电场经柔直外送系统的稳定性研究集中于单极接线方式,孤岛直驱风电场与采用不同双极协调控制的双极MMC-HVDC互联系统小信号稳定性问题还有待进一步探究。该文首先考虑频率耦合特性、参考系初相位和直流侧耦合特性的影响,分别建立了采用双U/f下垂控制和定U/f-P/Q控制的双极MMC-HVDC系统交流侧等效SISO阻抗模型,并详细分析了金属回线阻抗和双极间功率均分度对交流阻抗特性的影响。接着对比研究了两种协调控制中共有控制环路和特有控制环路对交流侧负电阻特性及互联系统稳定性的影响规律。最后,孤岛直驱风电场经两种双极协调控制下双极MMC-HVDC外送系统Matlab/Simulink时域仿真结果和硬件在环半实物实时仿真实验结果验证了所提出的小信号阻抗模型的精确性和稳定性分析结论的有效性。
