Lil.03Co0.10MnL90FxO4-x （z=0, 0.05, 0.10, 0.15 and 0.20） cathode materials were synthesized by solid-state reaction using Mn203, Li2CO3, C0203 and LiF as raw materials. The chemical compositions of Lil.03COo.lMnl.9F...Lil.03Co0.10MnL90FxO4-x （z=0, 0.05, 0.10, 0.15 and 0.20） cathode materials were synthesized by solid-state reaction using Mn203, Li2CO3, C0203 and LiF as raw materials. The chemical compositions of Lil.03COo.lMnl.9FzO4-z were examined by inductively coupled plasma （ICP） and potentiometric analysis, the effects of F-substitution contents on structure, morphology and electrochemical performance of spinel Lil.03Coo.loMnl.9004 were studied by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and electrochemical measurements. It is found that the Lix.03 Co0.10Mnl.9oFzOa_z samples display a single phase of cubic spinel structure. The lattice parameters increase with the increase of F content when z〈_0.10. However, the lattice parameters begin to decrease when F content continues to increase. The results show that an appropriate amount ofF substitution for O element with Li＋, Co3＋ improves discharge capacity and structure stability of the materials. The Lil.03Co0.10Mnl.90FoAsO3.s5 sample shows an initial discharge capacity of 111.0 mA.h/g and has capacity retention of 97.0% after 30 cycles at 0.2C.展开更多
The layered LiNi0.6Co0.2Mn0.2-yMgyO2-zFz（0≤y≤0.12, 0≤z≤0.08） cathode materials were synthesized by combining co-precipitation method and high temperature solid-state reaction, with the help of the ball milling, ...The layered LiNi0.6Co0.2Mn0.2-yMgyO2-zFz（0≤y≤0.12, 0≤z≤0.08） cathode materials were synthesized by combining co-precipitation method and high temperature solid-state reaction, with the help of the ball milling, to investigate the effects of F-Mg doping on LiNi0.6Co0.2Mn0.2O）2. Compared with previous studies, this doping treatment provides substantially improved electrochemical performance in terms of initial coulombic efficiency and cycle performance. The LiNi0.6Co0.2Mn0.11Mg0.09O1.96F0.04 electrode delivers an high capacity retention of 98.6% during the first cycle and a discharge capacity of 189.7 m A·h/g（2.8-4.4 V at 0.2 C）, with the capacity retention of 96.3% after 100 cycles. And electrochemical impedance spectroscopy（EIS） results show that Mg-F co-doping decreases the charge-transfer resistance and enhances the reaction kinetics, which is considered to be the major factor for higher rate performance. It is demonstrated that LiNi0.6Co0.2Mn0.11Mg0.09O1.96F0.04 is a promising cathode material for lithium-ion batteries for excellent electrochemical properties.展开更多
Fluorine doped tin oxide SnO2：F thin films were prepared by the spray pyrolysis （SP） technique on glass substrates by using SnC12.2H2O as a precursor and NH4F and HF as doping compounds. A comparison between the pr...Fluorine doped tin oxide SnO2：F thin films were prepared by the spray pyrolysis （SP） technique on glass substrates by using SnC12.2H2O as a precursor and NH4F and HF as doping compounds. A comparison between the properties of the films obtained by using the two doping compounds was performed by using I-V characteristics in the dark at room temperature, AC measurements, and transmittance. It is found that the films prepared by using HF have smaller resistivity, lower impedance and they are less capacitive than films prepared by using NH4F. In addition, these films have higher transmittance, higher optical bandgap energy and narrower Urbach tail width. These results are interesting for the use of SnO2：F as forecontact in CdS/CdTe solar cells.展开更多
基金Project(2011GZ0131) supported by the Sichuan Province Key Technology Support Program,China
文摘Lil.03Co0.10MnL90FxO4-x （z=0, 0.05, 0.10, 0.15 and 0.20） cathode materials were synthesized by solid-state reaction using Mn203, Li2CO3, C0203 and LiF as raw materials. The chemical compositions of Lil.03COo.lMnl.9FzO4-z were examined by inductively coupled plasma （ICP） and potentiometric analysis, the effects of F-substitution contents on structure, morphology and electrochemical performance of spinel Lil.03Coo.loMnl.9004 were studied by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and electrochemical measurements. It is found that the Lix.03 Co0.10Mnl.9oFzOa_z samples display a single phase of cubic spinel structure. The lattice parameters increase with the increase of F content when z〈_0.10. However, the lattice parameters begin to decrease when F content continues to increase. The results show that an appropriate amount ofF substitution for O element with Li＋, Co3＋ improves discharge capacity and structure stability of the materials. The Lil.03Co0.10Mnl.90FoAsO3.s5 sample shows an initial discharge capacity of 111.0 mA.h/g and has capacity retention of 97.0% after 30 cycles at 0.2C.
基金Project(1114022-15) supported by the Major Science and Technology Research Projects of Guangxi Province,China
文摘The layered LiNi0.6Co0.2Mn0.2-yMgyO2-zFz（0≤y≤0.12, 0≤z≤0.08） cathode materials were synthesized by combining co-precipitation method and high temperature solid-state reaction, with the help of the ball milling, to investigate the effects of F-Mg doping on LiNi0.6Co0.2Mn0.2O）2. Compared with previous studies, this doping treatment provides substantially improved electrochemical performance in terms of initial coulombic efficiency and cycle performance. The LiNi0.6Co0.2Mn0.11Mg0.09O1.96F0.04 electrode delivers an high capacity retention of 98.6% during the first cycle and a discharge capacity of 189.7 m A·h/g（2.8-4.4 V at 0.2 C）, with the capacity retention of 96.3% after 100 cycles. And electrochemical impedance spectroscopy（EIS） results show that Mg-F co-doping decreases the charge-transfer resistance and enhances the reaction kinetics, which is considered to be the major factor for higher rate performance. It is demonstrated that LiNi0.6Co0.2Mn0.11Mg0.09O1.96F0.04 is a promising cathode material for lithium-ion batteries for excellent electrochemical properties.
文摘Fluorine doped tin oxide SnO2：F thin films were prepared by the spray pyrolysis （SP） technique on glass substrates by using SnC12.2H2O as a precursor and NH4F and HF as doping compounds. A comparison between the properties of the films obtained by using the two doping compounds was performed by using I-V characteristics in the dark at room temperature, AC measurements, and transmittance. It is found that the films prepared by using HF have smaller resistivity, lower impedance and they are less capacitive than films prepared by using NH4F. In addition, these films have higher transmittance, higher optical bandgap energy and narrower Urbach tail width. These results are interesting for the use of SnO2：F as forecontact in CdS/CdTe solar cells.
