Catalytic cracking is the main method to lighten heavy crude oil,this process can produce high quality oil products such as gasoline and diesel,but also produces a large amount of fluid catalytic cracking slurry(FCCS)...Catalytic cracking is the main method to lighten heavy crude oil,this process can produce high quality oil products such as gasoline and diesel,but also produces a large amount of fluid catalytic cracking slurry(FCCS).The catalyst particles in FCCS seriously restrict the secondary processing of FCCS and need to be removed,and the properties of Fccs is an important factor that affects the removal efficiency of the catalyst particles.Based on the"effective contact point"model proposed by the research group,this study further proposed the"electrostatic separation efficiency calculation"model.In this model,since Fccs has a uniform distribution of catalyst particles,the ratio of the number of catalyst particles can be expressed as the ratio of area to achieve the calculation of separation efficiency.Then the catalyst removal efficiency under different viscosity was analyzed,thus verifying the feasibility of this model.The effects of temperature and mass ratio of four components on the viscosity of FccS were investigated respectively,then the effects of temperature and four components'mass ratio on the electrostatic sep-aration can be directly converted into the effect of viscosity on the electrostatic separation efficiency.All the results show the electrostatic separation efficiency decreases with increasing viscosity,and the best separationtemperatureis120℃.展开更多
To explore the effect of temperature on the phase transformation of HCP→FCC during compression, the uniaxial compression process of AZ31 magnesium alloy was simulated by the molecular dynamics method, and the changes...To explore the effect of temperature on the phase transformation of HCP→FCC during compression, the uniaxial compression process of AZ31 magnesium alloy was simulated by the molecular dynamics method, and the changes of crystal structure and dislocation evolution were observed. The effects of temperature on mechanical properties, crystal structure, and dislocation evolution of magnesium alloy during compression were analyzed. It is concluded that some of the Shockley partial dislocation is related to FCC stacking faults. With the help of TEM characterization, the correctness of the correlation between some of the dislocations and FCC stacking faults is verified. Through the combination of simulation and experiment, this paper provides an idea for the in-depth study of the solid-phase transformation of magnesium alloys and provides reference and guidance for the design of magnesium alloys with good plasticity and formability at room temperature.展开更多
The selective hydrogenation of polycyclic aromatic hydrocarbons(PAHs)from fluid catalytic cracking(FCC)slurry extract was conducted in a batch reactor over aγ-Al_(2)O_(3)-supported bimetallic Ni-W catalyst.For the Ni...The selective hydrogenation of polycyclic aromatic hydrocarbons(PAHs)from fluid catalytic cracking(FCC)slurry extract was conducted in a batch reactor over aγ-Al_(2)O_(3)-supported bimetallic Ni-W catalyst.For the Ni-W/γ-Al_(2)O_(3) catalyst,the experiment run was divided into three processes according to the reaction conditions used:(1)the absence of hydrogenation as both temperature and pressure increased;(2)the desulfurization of FCC slurry extract under a fixed pressure as the temperature increased;and(3)the selective hydrogenation of PAHs when both pressure and temperature remained constant.The hydrogen consumption could be accurately calculated from the Redlich–Kwong equation of state.The results for the removal of PAHs with hydrogenation displayed an excellent fit to the first-order kinetics.The apparent activation energy was determined to be 20.80 kJ/mol.展开更多
基金supported by the[Natural Science Foundation Project of Shandong Province#1]under Grant[ZR2019MEE033][Fundamental Research Funds for the central Universities#2]under Grant[19CX02035A].
文摘Catalytic cracking is the main method to lighten heavy crude oil,this process can produce high quality oil products such as gasoline and diesel,but also produces a large amount of fluid catalytic cracking slurry(FCCS).The catalyst particles in FCCS seriously restrict the secondary processing of FCCS and need to be removed,and the properties of Fccs is an important factor that affects the removal efficiency of the catalyst particles.Based on the"effective contact point"model proposed by the research group,this study further proposed the"electrostatic separation efficiency calculation"model.In this model,since Fccs has a uniform distribution of catalyst particles,the ratio of the number of catalyst particles can be expressed as the ratio of area to achieve the calculation of separation efficiency.Then the catalyst removal efficiency under different viscosity was analyzed,thus verifying the feasibility of this model.The effects of temperature and mass ratio of four components on the viscosity of FccS were investigated respectively,then the effects of temperature and four components'mass ratio on the electrostatic sep-aration can be directly converted into the effect of viscosity on the electrostatic separation efficiency.All the results show the electrostatic separation efficiency decreases with increasing viscosity,and the best separationtemperatureis120℃.
基金supported by the National Key Research and Development Project (2018YFB1307902)Shanxi Province Joint Student Training Base Talent Training Project(No.2018JD33)+5 种基金Shanxi young top talent projectShanxi Province Science Foundation for Youths (201901D211312)Excellent young academic leaders in Shanxi colleges and universities(No.2019045)Excellent Achievements Cultivation Project of Shanxi Higher Education Institutions(No.2019KJ028)Shanxi Province emerging industry leader talent projectShanxi Graduate Education Innovation Project(No.2019SY482)。
文摘To explore the effect of temperature on the phase transformation of HCP→FCC during compression, the uniaxial compression process of AZ31 magnesium alloy was simulated by the molecular dynamics method, and the changes of crystal structure and dislocation evolution were observed. The effects of temperature on mechanical properties, crystal structure, and dislocation evolution of magnesium alloy during compression were analyzed. It is concluded that some of the Shockley partial dislocation is related to FCC stacking faults. With the help of TEM characterization, the correctness of the correlation between some of the dislocations and FCC stacking faults is verified. Through the combination of simulation and experiment, this paper provides an idea for the in-depth study of the solid-phase transformation of magnesium alloys and provides reference and guidance for the design of magnesium alloys with good plasticity and formability at room temperature.
基金financially supported by the Natural Science Foundation of Jiangsu Province (Grant number:BK20140260)the Joint Project of Industry-UniversityResearch of Jiangsu Province (Grant number:BY2018158 and BY2021590)+1 种基金the CNPC-CZU Innovation Alliance,the Jiangsu Province Key Laboratory of Fine Petrochemical Engineering (Grant number:KF2302)the State Key Laboratory of Heavy Oil Processing。
文摘The selective hydrogenation of polycyclic aromatic hydrocarbons(PAHs)from fluid catalytic cracking(FCC)slurry extract was conducted in a batch reactor over aγ-Al_(2)O_(3)-supported bimetallic Ni-W catalyst.For the Ni-W/γ-Al_(2)O_(3) catalyst,the experiment run was divided into three processes according to the reaction conditions used:(1)the absence of hydrogenation as both temperature and pressure increased;(2)the desulfurization of FCC slurry extract under a fixed pressure as the temperature increased;and(3)the selective hydrogenation of PAHs when both pressure and temperature remained constant.The hydrogen consumption could be accurately calculated from the Redlich–Kwong equation of state.The results for the removal of PAHs with hydrogenation displayed an excellent fit to the first-order kinetics.The apparent activation energy was determined to be 20.80 kJ/mol.