Screening and flocculating properties of bioflocculant-producing microorganisms

Screening of bioflocculant-producing microorganisms was carded out. A strain that secreted excellent bioflocculant was isolated from municipal sewage using the spread plate technique, identified as Klebsiella sp. by the analytical profile index （API） identification system, and named A9. Several important factors that had an effect on A9＇s bioflocculant-producing and flocculating activity were studied. A total of 4 g/L Kaolin suspension was used to measure the flocculating activity of the bioflocculant from A9. It was found that maltose and urea were Ag＇s best carbon and nitrogen sources, respectively, and the flocculating activity of the flocculating agent from A9 was markedly increased by the addition of trivalent cations such as Fe^3＋ and Al^3＋; furthermore, the bioflocculant produced by A9 was most effective when the pH value was 6.0.

Screening of flocculant-producing microorganisms and flocculating activity

A strain saccharomycete STSM-1 with high flocculanting activity was isolated from activated sludge with conventional methods. The high production rate and the low cost STSM-1 medium was obtained by selecting different kinds of media, carbon source, nitrogen source and inorganic salt ion. The best flocculant-producing conditions were found by changing medium initial pH, culture temperature and ventilation flow. The best flocculating effect was obtained by changing positive ion types, density and concentration of flocculant.

Screening of Bioflocculant-Producing Strain by Ion Implantation and Flocculating Characteristics of Bioflocculants

A bioflocculant-producing mutator strain, NIM-192, was screened out through nitrogen ion implanting into F J-7 strain. The results showed that NIM-192 had good genetic stability and high flocculating activity, and the flocculating rate increased by 34.26% than that of the original. Sucrose, complex nitrogen source contained yeast extract, urea and pH 7.0～ 9.0 were chosen as the best carbon source, nitrogen source and initial solution pH for bioflocculant production, respectively. The bioflocculant kept high and stable flocculating activity at alkalinous reaction mixture with a pH beyond 7.0, while the flocculating activity was remarkably reduced when the reaction pH was lower than 7.0. Addition of many cations could obviously increase the flocculating rate, among which Ca^2＋ demonstrated the best effect. The bioflocculant had very strong acid-base stability and thermo-stability.The flocculating rate kept over 86% when pH of the bioflocculant was in a range of 3.0 ～ 12.0, and the change of flocculating activity was not great when heated at 100℃ for 60 rain.

Flocculating Properties and Production of the Compound Bioflocculant by Rhizobium Radiobacter F2 and Bacillus Sphaeicus F6

A compound bioflocculant CBF,produced by mixed culture of Rhizobium radiobacter F2 and Bacillus sphaeicus F6, was investigated with regard to its production and flocculating properties. The optimization of the culture medium constituents including carbon source,nitrogen source and C / N ratio,metal ions and ionic strength on CBF production were studied. Flocculating properties of CBF were examined by a series of experiments and CBF had good flocculating activities in kaolin suspension with divalent cations and stable over wide range of p H. Studies of the flocculating properties revealed that the flocculation could be stimulated by cations Ca2+,Mg2+,Fe2+,Al3+and Fe3+. In addition,it was stable at 4-30 ℃ in the presence of Ca Cl2. It was found to be effective for flocculation of a kaolin suspension under neutral and weak alkaline conditions( p H 7. 0- 9. 0),and flocculating activities of higher than 95% were obtained when the CBF concentrations among 6- 14 mg / L at p H 8. 0. The results of this study indicate that CBF is a potential replacement of conventional synthetic flocculants and is widely applied in water treatment and downstream processing of food and fermentation industries.

Flocculating Properties of Water-Soluble Polymer-Colloid Complexes of Aluminoxane Particles with Weakly Charged Cationic Polyelectrolytes

The flocculating properties of polymer-colloid complexes (PCCs) formed via noncovalent interactions of positively charged aluminoxane particles (APs) with macromolecules of weakly charged cationic acrylamide copolymers from the Praestol and Organopol series have been studied. The PCCs that spontaneously formed during mixing of sols of a high-basicity aluminum polyhydroxochloride (APHC) with aqueous solutions of the copolymers exhibit high flocculating ability under the conditions of gravity sedimentation of the model kaolin dispersion with Сd = 8 g/dm3, and their efficiency exceeds both that of the copolymers and the earlier obtained PCCs with nonionogenic polyacrylamide (PAA). In contrast to weakly charged polycationites, the fully charged KF-99 polyelectrolyte does not form PCCs and the products of its mixing with APHC do not reveal an increased flocculating effect.

Recycling of Alum from Water Treatment Residue and Reuse It as a Flocculating Agent for Raw Water Treatment

The chemical coagulation-flocculation technology is touted as one of the valuable techniques and widely used for wastewater treatment because of its simplicity and effectiveness. So far, a number of flocculants have been fabricated to ameliorate the flocculation process in water treatment such as alum, polyaluminium chloride. Despite its broad application in water treatment, accumulation of alum in sludge has been reported as the main source of a disposal problem. Furthermore, recent studies suggested that the presence of alum in sludge may lead to human health problems. Here in, we have used alkalization method to recover alum present in sludge collected from Kimisagara water treatment plant located in Kigali capital city of Rwanda. The recovered alum was used more than one time and showed excellent flocculation efficiency. Some physical parameters such as pH, Total Suspended Solids (TSS), Total Dissolved Solids (TDS), Conductivity and Turbidity were systematically tested and compared with those of World Health Organization (WHO) and Rwanda Standards Board (RSB) standards for drinking water. The results showed that alum present in sludge can be recovered and reused for multiple times.

Synthesis and formation mechanism of HfB_(2) ultrafine powders with low oxygen via flocculating settling assisted process and carbo/borothermal reduction

In this study,ultrafine HfB_(2) powders with low oxygen were synthesized by a flocculating settling process which yielded ceramic precursors and subsequent carbo/borothermal reduction of the precursors.The liquid phase precursor method can achieve uniform mixing of components at the molecular level through multiple complexation reactions,and then realize the carbo/borothermal reduction reaction at a lower temperature to obtain ultrapure HfB2 powders.The as-resulted quasi-spherical HfB2 powders under the optimum conditions(atomic molar ratio M:B:C=1:2.8:10)calcined at 1500°C for 1 h have an average particle size of 205 nm and an oxygen content of 0.097 wt.%.Detailed analysis of the phase evolution of precursors shows that the formation of HfB2 particles is a mass diffusion mode from the external to internal HfO_(2)cores.We reveal that below 1300°C,HfC is not an intermediate product of HfB2 powder during the transition of precursors.Instead,HfC was formed as a by-product at high temperatures in the carbo/borothermal reduction process.The proposed formation mechanism of HfB_(2) is completely different from the traditional two-step transformation method.After the sintering of the ultrafine powders,the HfB_(2) ceramics show a relative density of 96.1%and superior mechanical properties compared to other works.Furthermore,by simply replacing the initial metal source,chlorinated group IV and V transitional metals(Ti,Zr,Ta,Nb)can also convert into high-purity and ultrafine diborides.This work shows that flocculating settling assisted carbo/borothermal reduction has potential in lot size production of various high-purity and ultrafine boride powders.

Experimental investigation of the inhibition of deep-sea mining sediment plumes by polyaluminum chloride

Deep-sea sediment disturbance may occur when collecting polymetallic nodules,resulting in the creation of plumes that could have a negative impact on the ecological environment.This study aims to investigate the potential solution of using polyaluminum chloride(PAC)in the water jet.The effects of PAC are examined through a self-designed simulation system for deep-sea polymetallic nodule collection and sediment samples from a potential deep-sea mining area.The experimental results showed that the optimal PAC dose was found to be 0.75 g/L.Compared with the test conditions without the addition of PAC,the presence of PAC leads to a reduction in volume,lower characteristic turbidity,smaller diffusion velocity,and shorter settling time of the plume.This indicates that PAC inhibits the entire development process of the plume.The addition of PAC leads to the flocculation of mm-sized particles,resulting in the formation of cm-sized flocs.The flocculation of particles decreases the rate of erosion on the seabed by around 30%.This reduction in erosion helps to decrease the formation of plumes.Additionally,when the size of suspended particles increases,it reduces the scale at which they diffuse.Furthermore,the settling velocity of flocs(around 10^(-2) m/s)is much higher that of compared to sediment particles(around 10^(-5) m/s),which effectively reduces the amount of time the plume remains in suspension.

Ammonium Metavanadate Fabricated by Selective Precipitation of Impurity Chemicals on Inorganic Flocculants

High purity ammonium metavanadate(NH_(4)VO_(3))is the most vital chemical to produce V2O5,VO2,VN alloy,VFe alloy and VOSO4,which have some prospective applications for high strength steel,smart window,infrared detector and imaging,large scale energy storage system.NH_(4)VO_(3)is usually produced by spontaneous crystallization from the aqueous solution due to its sharp dependence of solubility on the temperature.However,hazardous chemicals in industrial effluent,include phosphorate,silicate and arsenate,causing severe damage to the environment.In this work,these impurities are selectively precipitated onto inorganic flocculants,while the vanadate dissolved in an aqueous solution keeps almost undisturbed.Therefore,high purity NH_(4)VO_(3)is produced by the crystallization from the purified solution.By screening various flocculants and precipitating parameters,polyaluminum sulfate with an optimal amount of 50 g/L,is demonstrated to selectively remove phosphorate,silicate and arsenate,corresponding to the removing efficiency of 93.39%,97.11%and 88.31%,respectively.NH_(4)VO_(3)from the purified solution holds a purity of 99.21%,in comparison with 98.33%in the product from the crude solution.This purifying technology cannot only produce NH_(4)VO_(3)with high added value,but also reduce the environmental pollution of waste liquid.

In situ kinetics and flocs conformation studies of kaolinite flocculated by Chi-g-CPAM

This study presents a comparative study of the flocculation behavior of kaolinite induced by chitosan-graft-poly(acrylamide-dimethyl diallyl ammonium chloride)(Chi-g-CPAM) and a commercial cationic polyacrylamide(CPAM).The flocculation behaviour was characterised in terms of both flocculation kinetics and the corresponding morphology changes during flocculation.Both Chi-g-CPAM and CPAM were grafted from silica wafers by means of atom transfer radical polymerization(ATRP).The quartz crystal microbalance with dissipation(QCM-D) tests were conducted.The equilibrium time flocculated by Chi-g-CPAM was found to be 0.46 times as that of CPAM,together with a larger total mass of kaolinite layer.The flocculation behaviour by Chi-g-CPAM can be well captured by a pseudo-first-order model.In contrast,the presence of CPAM leads to a more complex kinetics.A relatively larger fitting slope(0.4663) was obtained at the initial stage but the fitting slope droped to 0.2026 after 800 min,indicating a densification process caused by CPAM.The flocculation kinetics of CPAM can be captured by the Elovich model for the inital stage but the combination of pseudo-first-order and pseudo-second-order models for the latter stages,which can be attributed to the long chain of CPAM.With a dosage of 75 g/t,the settling test with Chi-g-CPAM exhibits the same turbidity in the supernatant but a smaller layer thickness of the settlement compared to CPAM.The study enables a better understanding of the flocculation behavior and contributes to the development of efficient flocculants in mineral processing and tailings treatment.

Synthesis and Flocculation of Polyacrylamide with Low Water Absorption for Non-dispersible Underwater Concrete

The polyacrylamide which is directly added into concrete shows strong water absorption property.Thus the construction of underwater constructure would demand high amount of water,resulting in poor workability of concrete and strength shrinkage after hardening.Herein,a kind of anionic polyacrylamide(APAM)grafted with water reducing functional group(-COOH)was synthesized at low temperatures by partial factor design and response surface design.The structure and morphology of APAM were characterized by UV,FTIR and SEM methods.The experimental results show that the molecular weight of the synthesized APAM could reach 11 million,under the condition that the temperature was 35℃,the pH value was 8,the monomer concentration was 27wt%,the initiator dosage was 0.6wt%,and the monomer ratio(n(AM):n(AA))was 3.When the APAM was applied into the underwater slurry,it presented good flocculation and low water demand.When the dosage was 1%of the mass of the cement,the water demand increased by 12%,which could meet the self-leveling and anti-dispersity of the underwater slurry at the same time.This technology provides technical guidance for the large-scale industrial production of polyacrylamide for underwater concrete construction while achieving environmental protection during production.

絮凝沉淀和人工湿地法治理化学实验室废水(英文)

The basic chemistry laboratories of three colleges and universities in Guizhou Province were investigated completely,especially the pollution situations of the basic chemistry projects were counted,and the discharge amounts of the poisonous and harmful pollutants in the waste liquid from laboratories were monitored and analyzed.On the basis of the summing-up and analysis of the current research findings,a simple and feasible treatment scheme through flocculating,precipitating and constructed wetlands was designed to control the three kinds of excessive pollutants.

Characteristics and Culture Conditions of a Bioflocculant Produced by Penicillium sp.

Objective To study the characteristics of a bioflocculant named MBF7 produced by Penicillum strain HHE-P7 and the effects of cultivation conditions on bioflocculant production. Methods The chemical group in the bioflocculant molecules was shown by Fourier transform infrared （FTIR） spectra, and the average molecular weight of MBF7 was estimated by gel permeation chromatography. The effects of medium components on bioflocculant production and flocculating activity were studied. Results Phospho-, amino-, hydroxyl, and carboxyl groups were the major fractions of MBF7, and the molecule weight was about 3.0 × 10^5 Da. In addition, the carbon and nitrogen sources favorable for the bioflocculant production were glucose and yeast extract respectively. When the initial pH of the medium was adjusted to 5.0, high flocculant efficiency could be achieved. Conclusion The bioflocculant MBF7 is a new macromolecule with high flocculating efficiency for Kaolin suspension, and could be produced under appropriate culture conditions.

Influence of coarse tailings on flocculation settlement

The composition of tailings particles in mines plays a key role in the flocculation settlement of slurries.To study the influence of coarse particle tailings(CPTs)on the flocculation settlement of tailings slurries(TSs),static flocculent settling tests,scanning electron microscopy observations,and laser particle size analyses were conducted using the tailings obtained from a copper mine.The results demonstrate that(i)in the accelerated and free settling process,CPTs did not directly settle at the bottom of graduated cylinders;instead,they were netted by the flocculent structures(FSs)and settled together more quickly.The CPTs accelerate the rapid settlement of TSs;the acceleration effect is more obvious when the CPTs content is greater than 50 wt%.(ii)The most appropriate flocculant unit consumption(FUC)is 20 g·t-1,and no substantial increase is observed in the flocculant settling velocity with an increase in the flocculant because the effective FSs did not substantially change and thus did not lead to a notable increase in the settling velocity of the solid–liquid interface(SLI).(iii)In the effective settling space of the thickening facility,free water quickly flowed from the pores of FSs,which is reflected in the period from 0 to 1 min.

Study on Production and Flocculation Conditions of Bio-Flocculant

One strain of bacteria which shows very high flocculation characteristics is found. It is identified as a Pseudomonas species. The influence of components of culture medium on the flocculant production by Pseudomonas sp. is studied.The results of our experiments show that the higbest level of bio-flocculant accumulation is obtained and the hioflocculant can efrectively flocculate kaolin clay on condition that this stralu is grown in the medium containing glucose as carbon source, aud (NH4)2SO4 as nitrogen source, with the yend extract being added. In addition, some kinds of cationic ions have some influences on the flocculation rate of kaolin clay with tbe Al3+ions in particular.

滇池疏浚底泥脱水试验研究(英文)

[Objective] The technological parameter suitable for the dewatering of dredged sediment from Dianchi Lake was studied.[Method] By means of the treatment method of sewage sludge in sewage treatment plant,flocculants including FeCl3,Al2(SO4)3 and PAM were taken as dewatering agents which were added in dredged sediment.[Result] The results showed that Al2(SO4)3 had better dewatering effect than FeCl3 and PAM,and the optimum dosing quantity of Al2(SO4)3 in dredged sediment was 170 mg/L,in addition,the water quality of supernatant met the first class B standard of GB18918-2002 and could be directly discharged to nature water without pollution.[Conclusion] The study could provide a simple and feasible way for the rapid dewatering of dredged sediment from Dianchi Lake,which would be convenient for the disposal and resource utilization of dredged sediment.

RESEARCH ON CATIONIC POLYMER WATER BASE DRILLING FLUIDS

Cationic polymer drilling fluid (CPDF) is a new water base drilling fluid in which high molecular weight (HMW) cationic polymer (CPAM) is an encapsulating and flocculating agent and organic quaternary ammonium compound (NW-1) acts as shale inhibitor. This paper describes the experimental results of cuttings recovery, particle size distribution layer spacing and Zeta potential, and discusses the inhibition of CPDF system and its major additives. The advantages of CPDF will be proved by its application in well LX-2.

Studies on Bioflocculant Production by Pseudoalteromonas sp. NUM8, a Marine Bacteria Isolated from the Circulating Seawater

A bioflocculant producing potential bacteria was isolated from the circulating seawater of bio-filter using streak plate methods.The bacteria was identified through biochemical characteristics,partial 16S ribosomal ribonucleic acids(rRNA),nucleo-tide sequencing,and BLAST analysis of the gene sequence that showed the bacteria have 99%similarity to Pseudoalteromonas sp.and deposited in GenBank as Pseudoalteromonas sp.NUM8 with accession number JX435820.Influences of time course assay,carbon sources,nitrogen sources,inoculum size,as well as initial pH on the bacteria producing extracellular bioflocculant activity were investigated.The results showed that the strain optimal production period of microbial bioflocculant was at 72 h(flocculating activity of 94.5%),then dropped slowly.The bacteria optimally produced the bioflocculant when 1.0%sucrose and 0.5%sodium nitrate were used as sole sources of carbon and nitrogen with flocculating activities of 92.8%and 93.8%respectively.Also,the bacteria produced the bioflocculant optimally when initial pH of the medium was 5.0(flocculating activity 93.2%),and when Ca^(2+)was used as cation(flocculating activity 93.4%).The culture condition of inoculum size of 3%(v/v)was optimal flocculant pro-duction(flocculating activity 94.4%).Composition analyses indicated the bioflocculant to be principally a glycoprotein made up of about 34.3%protein and 63.4%total carbohydrate.

Two-step fermentation process and the corresponding study on its enzymology characteristics

Strain HIT-3,which has good performances in cellulose degradation,was isolated from the campus soil. Based on the identification of conservative sequences 16S rDNA and the analysis of physiological-biochemical characteristics,HIT-3 was identified as Achromobacter xylosoxidans. Denitrificans. A two-step fermentation process was conducted by adopting compound-bioflocculant-producing flora constructed by cellulose-degrading bacterium HIT-3 and flocculating bacterium F2. The cellulose degradation metabolites of HIT-3 was taken as substrates by flocculating bacterium F2,by which excellent compound bio-flocculant was obtained. In addition,the enzymology characteristics of HIT-3 were investigated when cultured in cellulose media,which utilized CMC-Na as its sole carbon. The results show that HIT-3 achieves a climax of 67.6 U/mL of enzyme production after incubation for 6 d,and the organic carbons produced are sufficient as the substrates required by the fermentation of flocculating bacterium F2(flocculating efficiency of 85.6%),which makes it feasible to reuse bioenergy.

Screening of Bioflocculant-Producing Strains and Characteristics of Microbial Flocculation

A high effective bioflocculant-producing strain named LB1 was isolated and screened from the leachate by routine micro- method. The strain was identified as genus Pseudomonas according to the morphologic and physiological-biochemical characteristics of the strain. The biological characteristics of the microbial flocculants produced by LB1 were investigated. The results show that the optimal production period of microbial flocculant using LB1 is 96 h; and the products, found in the fermentation liquor, comprise the extracellular organic matter （EOM） of LB1 generated during LB1 growth and the secondary metabolites in the anaphase of LB1. Meanwhile, the mycelia can improve the performance of the microbial flocculants. Because heat has a greater influence on the active substance in the microbial flocculants than other factors, the activity of the flocculants decreases with increasing temperature and the time of heating. The flocculants can flocculate mud-containing and melanin-containing wastewater effectively with a flocculation ratio of 85.1% and 92.2%, respectively. The optimal heating temperature varies from 20 to 45 ℃. When flocculating the two wastewater, the flocculating activity of the flocculants is above 57.7% and 70.9%, respectively, in a wide pH range from 3 to 11.