Recently, some new quadrilateral finite elements were successfully developed by the Quadrilateral Area Coordinate （QAC） method. Compared with those traditional models using isoparametric coordinates, these new model...Recently, some new quadrilateral finite elements were successfully developed by the Quadrilateral Area Coordinate （QAC） method. Compared with those traditional models using isoparametric coordinates, these new models are less sensitive to mesh distortion. In this paper, a new displacement-based, 4-node 20-DOF （5-DOF per node） quadrilateral bending element based on the first-order shear deformation theory for analysis of arbitrary laminated composite plates is presented. Its bending part is based on the element AC-MQ4, a recent-developed high-performance Mindlin-Reissner plate element formulated by QAC method and the generalized conforming condition method; and its in-plane displacement fields are interpolated by bilinear shape functions in isoparametric coordinates. Furthermore, the hybrid post-rocessing procedure, which was firstly proposed by the authors, is employed again to improve the stress solutions, especially for the transverse shear stresses. The resulting element, denoted as AC-MQ4-LC, exhibits excellent performance in all linear static and dynamic numerical examples. It demonstrates again that the QAC method, the generalized conforming condition method, and the hybrid post-processing procedure are efficient tools for developing simple, effective and reliable finite element models.展开更多
The aim of this study is to investigate the dynamic response of axially moving two-layer laminated plates on the Winkler and Pasternak foundations. The upper and lower layers are formed from a bidirectional functional...The aim of this study is to investigate the dynamic response of axially moving two-layer laminated plates on the Winkler and Pasternak foundations. The upper and lower layers are formed from a bidirectional functionally graded(FG) layer and a graphene platelet(GPL) reinforced porous layer, respectively. Henceforth, the combined layers will be referred to as a two-dimensional(2D) FG/GPL plate. Two types of porosity and three graphene dispersion patterns, each of which is distributed through the plate thickness,are investigated. The mechanical properties of the closed-cell layers are used to define the variation of Poisson’s ratio and the relationship between the porosity coefficients and the mass density. For the GPL reinforced layer, the effective Young’s modulus is derived with the Halpin-Tsai micro-system model, and the rule of mixtures is used to calculate the effective mass density and Poisson’s ratio. The material of the upper 2D-FG layer is graded in two directions, and its effective mechanical properties are also derived with the rule of mixtures. The dynamic governing equations are derived with a first-order shear deformation theory(FSDT) and the von Kármán nonlinear theory. A combination of the dynamic relaxation(DR) and Newmark’s direct integration methods is used to solve the governing equations in both time and space. A parametric study is carried out to explore the effects of the porosity coefficients, porosity and GPL distributions, material gradients, damping ratios, boundary conditions, and elastic foundation stiffnesses on the plate response. It is shown that both the distributions of the porosity and graphene nanofillers significantly affect the dynamic behaviors of the plates. It is also shown that the reduction in the dynamic deflection of the bilayer composite plates is maximized when the porosity and GPL distributions are symmetric.展开更多
The generalized differential quadrature method （GDQM） is employed to con- sider the free vibration and critical speed of moderately thick rotating laminated compos- ite conical shells with different boundary conditi...The generalized differential quadrature method （GDQM） is employed to con- sider the free vibration and critical speed of moderately thick rotating laminated compos- ite conical shells with different boundary conditions developed from the first-order shear deformation theory （FSDT）. The equations of motion are obtained applying Hamilton＇s concept, which contain the influence of the centrifugal force, the Coriolis acceleration, and the preliminary hoop stress. In addition, the axial load is applied to the conical shell as a ratio of the global critical buckling load. The governing partial differential equations are given in the expressions of five components of displacement related to the points ly- ing on the reference surface of the shell. Afterward, the governing differential equations are converted into a group of algebraic equations by using the GDQM. The outcomes are achieved considering the effects of stacking sequences, thickness of the shell, rotating velocities, half-vertex cone angle, and boundary conditions. Furthermore, the outcomes indicate that the rate of the convergence of frequencies is swift, and the numerical tech- nique is superior stable. Three comparisons between the selected outcomes and those of other research are accomplished, and excellent agreement is achieved.展开更多
An efficient and accurate analytical model for piezoelectric bimorph based on the improved first-order shear defor- mation theory (FSDT) is developed in this work. The model combines the equivalent single-layer approa...An efficient and accurate analytical model for piezoelectric bimorph based on the improved first-order shear defor- mation theory (FSDT) is developed in this work. The model combines the equivalent single-layer approach for mechanical dis- placements and a layerwise-type modelling of the electric potential. Particular attention is devoted to the boundary conditions on the outside faces and to the interface continuity conditions of the bimorphs for the electromechanical variables. Shear correction factor (k) is introduced to modify both the shear stress and the electric displacement of each layer. And the detailed mathematical derivations are presented. Free vibration problem of simply supported piezoelectric bimorphs with series or parallel arrangement is investigated for the closed circuit condition, and the results for different length-to-thickness ratios are compared with those ob- tained from the exact 2D solution. Excellent agreements between the present model prediction with k=8/9 and the exact solutions are observed for the resonant frequencies.展开更多
Use of composite structures is exponentially growing in different fields due to their higher strength-to-weight ratio. This application trend requires that accurate theoretical explanations and their finite element mo...Use of composite structures is exponentially growing in different fields due to their higher strength-to-weight ratio. This application trend requires that accurate theoretical explanations and their finite element models be developed for analyzing sandwich plates before finalizing the designs. This paper reviews the recent research trends of finite element formulations developed for analyzing sandwich plates. This paper reviews the finite element models developed after the year 2000. Initially, the finite element formulations based on first order shear deformation theory, higher order shear deformation theories, mixed solid-shell elements, zig-zag theories and global–local theories are presented. Then, some finite element formulations developed to analyze a very new class of structures called piezoelectric structures are presented. At the end, some formulations to analyze a very critical phenomenon called buckling are presented.展开更多
It is well known that smart thermostats (STs) have become key devices in the implementation of smart homes;thus, they are considered as primary elements for the control of electrical energy consumption in households. ...It is well known that smart thermostats (STs) have become key devices in the implementation of smart homes;thus, they are considered as primary elements for the control of electrical energy consumption in households. Moreover, energy consumption is drastically affected when the end users select unsuitable STs or when they do not use the STs correctly. Furthermore, in future, Mexico will face serious electrical energy challenges that can be considerably resolved if the end users operate the STs in a correct manner. Hence, it is important to carry out an in-depth study and analysis on thermostats, by focusing on social aspects that influence the technological use and performance of the thermostats. This paper proposes the use of a signal detection theory (SDT), fuzzy detection theory (FDT), and chi-square (CS) test in order to understand the perceptions and beliefs of end users about the use of STs in Mexico. This paper extensively shows the perceptions and beliefs about the selected thermostats in Mexico. Besides, it presents an in-depth discussion on the cognitive perceptions and beliefs of end users. Moreover, it shows why the expectations of the end users about STs are not met. It also promotes the technological and social development of STs such that they are relatively more accepted in complex electrical grids such as smart grids.展开更多
基金The project is supported by the National Natural Science Foundation of China(10502028)the Special Foundation for the Authors of the Nationwide(China)Excellent Doctoral Dissertation(200242)the Science Research Foundation of China Agricultural University(2004016).
文摘Recently, some new quadrilateral finite elements were successfully developed by the Quadrilateral Area Coordinate （QAC） method. Compared with those traditional models using isoparametric coordinates, these new models are less sensitive to mesh distortion. In this paper, a new displacement-based, 4-node 20-DOF （5-DOF per node） quadrilateral bending element based on the first-order shear deformation theory for analysis of arbitrary laminated composite plates is presented. Its bending part is based on the element AC-MQ4, a recent-developed high-performance Mindlin-Reissner plate element formulated by QAC method and the generalized conforming condition method; and its in-plane displacement fields are interpolated by bilinear shape functions in isoparametric coordinates. Furthermore, the hybrid post-rocessing procedure, which was firstly proposed by the authors, is employed again to improve the stress solutions, especially for the transverse shear stresses. The resulting element, denoted as AC-MQ4-LC, exhibits excellent performance in all linear static and dynamic numerical examples. It demonstrates again that the QAC method, the generalized conforming condition method, and the hybrid post-processing procedure are efficient tools for developing simple, effective and reliable finite element models.
文摘The aim of this study is to investigate the dynamic response of axially moving two-layer laminated plates on the Winkler and Pasternak foundations. The upper and lower layers are formed from a bidirectional functionally graded(FG) layer and a graphene platelet(GPL) reinforced porous layer, respectively. Henceforth, the combined layers will be referred to as a two-dimensional(2D) FG/GPL plate. Two types of porosity and three graphene dispersion patterns, each of which is distributed through the plate thickness,are investigated. The mechanical properties of the closed-cell layers are used to define the variation of Poisson’s ratio and the relationship between the porosity coefficients and the mass density. For the GPL reinforced layer, the effective Young’s modulus is derived with the Halpin-Tsai micro-system model, and the rule of mixtures is used to calculate the effective mass density and Poisson’s ratio. The material of the upper 2D-FG layer is graded in two directions, and its effective mechanical properties are also derived with the rule of mixtures. The dynamic governing equations are derived with a first-order shear deformation theory(FSDT) and the von Kármán nonlinear theory. A combination of the dynamic relaxation(DR) and Newmark’s direct integration methods is used to solve the governing equations in both time and space. A parametric study is carried out to explore the effects of the porosity coefficients, porosity and GPL distributions, material gradients, damping ratios, boundary conditions, and elastic foundation stiffnesses on the plate response. It is shown that both the distributions of the porosity and graphene nanofillers significantly affect the dynamic behaviors of the plates. It is also shown that the reduction in the dynamic deflection of the bilayer composite plates is maximized when the porosity and GPL distributions are symmetric.
文摘The generalized differential quadrature method （GDQM） is employed to con- sider the free vibration and critical speed of moderately thick rotating laminated compos- ite conical shells with different boundary conditions developed from the first-order shear deformation theory （FSDT）. The equations of motion are obtained applying Hamilton＇s concept, which contain the influence of the centrifugal force, the Coriolis acceleration, and the preliminary hoop stress. In addition, the axial load is applied to the conical shell as a ratio of the global critical buckling load. The governing partial differential equations are given in the expressions of five components of displacement related to the points ly- ing on the reference surface of the shell. Afterward, the governing differential equations are converted into a group of algebraic equations by using the GDQM. The outcomes are achieved considering the effects of stacking sequences, thickness of the shell, rotating velocities, half-vertex cone angle, and boundary conditions. Furthermore, the outcomes indicate that the rate of the convergence of frequencies is swift, and the numerical tech- nique is superior stable. Three comparisons between the selected outcomes and those of other research are accomplished, and excellent agreement is achieved.
基金Project (Nos. 10472102 and 10372089) supported by the NationalNatural Science Foundation of China
文摘An efficient and accurate analytical model for piezoelectric bimorph based on the improved first-order shear defor- mation theory (FSDT) is developed in this work. The model combines the equivalent single-layer approach for mechanical dis- placements and a layerwise-type modelling of the electric potential. Particular attention is devoted to the boundary conditions on the outside faces and to the interface continuity conditions of the bimorphs for the electromechanical variables. Shear correction factor (k) is introduced to modify both the shear stress and the electric displacement of each layer. And the detailed mathematical derivations are presented. Free vibration problem of simply supported piezoelectric bimorphs with series or parallel arrangement is investigated for the closed circuit condition, and the results for different length-to-thickness ratios are compared with those ob- tained from the exact 2D solution. Excellent agreements between the present model prediction with k=8/9 and the exact solutions are observed for the resonant frequencies.
文摘Use of composite structures is exponentially growing in different fields due to their higher strength-to-weight ratio. This application trend requires that accurate theoretical explanations and their finite element models be developed for analyzing sandwich plates before finalizing the designs. This paper reviews the recent research trends of finite element formulations developed for analyzing sandwich plates. This paper reviews the finite element models developed after the year 2000. Initially, the finite element formulations based on first order shear deformation theory, higher order shear deformation theories, mixed solid-shell elements, zig-zag theories and global–local theories are presented. Then, some finite element formulations developed to analyze a very new class of structures called piezoelectric structures are presented. At the end, some formulations to analyze a very critical phenomenon called buckling are presented.
文摘It is well known that smart thermostats (STs) have become key devices in the implementation of smart homes;thus, they are considered as primary elements for the control of electrical energy consumption in households. Moreover, energy consumption is drastically affected when the end users select unsuitable STs or when they do not use the STs correctly. Furthermore, in future, Mexico will face serious electrical energy challenges that can be considerably resolved if the end users operate the STs in a correct manner. Hence, it is important to carry out an in-depth study and analysis on thermostats, by focusing on social aspects that influence the technological use and performance of the thermostats. This paper proposes the use of a signal detection theory (SDT), fuzzy detection theory (FDT), and chi-square (CS) test in order to understand the perceptions and beliefs of end users about the use of STs in Mexico. This paper extensively shows the perceptions and beliefs about the selected thermostats in Mexico. Besides, it presents an in-depth discussion on the cognitive perceptions and beliefs of end users. Moreover, it shows why the expectations of the end users about STs are not met. It also promotes the technological and social development of STs such that they are relatively more accepted in complex electrical grids such as smart grids.
