Feature Extraction of Fabric Defects Based on Complex Contourlet Transform and Principal Component Analysis

To extract features of fabric defects effectively and reduce dimension of feature space,a feature extraction method of fabric defects based on complex contourlet transform （CCT） and principal component analysis （PCA） is proposed.Firstly,training samples of fabric defect images are decomposed by CCT.Secondly,PCA is applied in the obtained low-frequency component and part of highfrequency components to get a lower dimensional feature space.Finally,components of testing samples obtained by CCT are projected onto the feature space where different types of fabric defects are distinguished by the minimum Euclidean distance method.A large number of experimental results show that,compared with PCA,the method combining wavdet low-frequency component with PCA （WLPCA）,the method combining contourlet transform with PCA （CPCA）,and the method combining wavelet low-frequency and highfrequency components with PCA （WPCA）,the proposed method can extract features of common fabric defect types effectively.The recognition rate is greatly improved while the dimension is reduced.

Automatic Fabric Defects Inspection Machine

The textile industry is one of the most important industries in Sri Lanka.In most of the textile garment factories the defects of the fabrics are detected manually.The manual textile quality control usually depends on eye inspection.Famously,human visual assessment is drawn-out,tiring,and an exhausting errand,including perception,consideration and experience to recognize the fault occurrence.The precision of human visual assessment declines with dull positions and vast schedules.Some of the time slow,costly,and sporadic review is the outcome.In this manner,the programmed automatic visual review safeguards both the fabric quality inspector and the quality.This examination has exhibited that Textile Defect Recognition System is fit for distinguishing fabrics’imperfections with endorsed exactness with viability.With some products 100%inspection is important to ensure the stipulated quality or standard.The classifications for the automated fabric inspection approaches are expanding as the work is vast and complex.According to the algorithm used,the texture analysis problem is classified into different approaches.They are Structural,spectral,model-based methods,Unfortunately,the optimal plan does not yet exist for these vast numbers of applied methods,as each of them has some advantages and disadvantages.

Detection of Fabric Defects with Fuzzy Label Co-occurrence Matrix Set

Co-occurrence matrices have been successfully applied in texture classification and segmentation.However,they have poor computation performance in real-time application.In this paper,the efficient co-occurrence matrix solution for defect detection is focused on,and a method of Fuzzy Label Co-occurrence Matrix (FLCM) set is proposed.In this method,all gray levels are supposed to subject to some fuzzy sets called fuzzy tonal sets and three defective features are defined.Features of FLCM set with various parameters are combined for the final judgment.Unlike many methods,image acquired for learning hasn't to be entirely free of defects.It is shown that the method produces high accuracy and can be a competent candidate for plain colour fabric defect detection.

Automatic Image Inspection of Fabric Defects Based on Optimal Gabor Filter

An effective method for automatic image inspection of fabric defects is presented. The proposed method relies on a tuned 2D-Gabor filter and quantum-behaved particle swarm optimization( QPSO) algorithm. The proposed method consists of two main steps:( 1) training and( 2) image inspection. In the image training process,the parameters of the 2D-Gabor filters can be tuned by QPSO algorithm to match with the texture features of a defect-free template. In the inspection process, each sample image under inspection is convoluted with the selected optimized Gabor filter.Then a simple thresholding scheme is applied to generating a binary segmented result. The performance of the proposed scheme is evaluated by using a standard fabric defects database from Cotton Incorporated. Good experimental results demonstrate the efficiency of proposed method. To further evaluate the performance of the proposed method,a real time test is performed based on an on-line defect detection system. The real time test results further demonstrate the effectiveness, stability and robustness of the proposed method,which is suitable for industrial production.

Multi-Layer Feature Extraction with Deformable Convolution for Fabric Defect Detection

In the textile industry,the presence of defects on the surface of fabric is an essential factor in determining fabric quality.Therefore,identifying fabric defects forms a crucial part of the fabric production process.Traditional fabric defect detection algorithms can only detect specific materials and specific fabric defect types;in addition,their detection efficiency is low,and their detection results are relatively poor.Deep learning-based methods have many advantages in the field of fabric defect detection,however,such methods are less effective in identifying multiscale fabric defects and defects with complex shapes.Therefore,we propose an effective algorithm,namely multilayer feature extraction combined with deformable convolution(MFDC),for fabric defect detection.In MFDC,multi-layer feature extraction is used to fuse the underlying location features with high-level classification features through a horizontally connected top-down architecture to improve the detection of multi-scale fabric defects.On this basis,a deformable convolution is added to solve the problem of the algorithm’s weak detection ability of irregularly shaped fabric defects.In this approach,Roi Align and Cascade-RCNN are integrated to enhance the adaptability of the algorithm in materials with complex patterned backgrounds.The experimental results show that the MFDC algorithm can achieve good detection results for both multi-scale fabric defects and defects with complex shapes,at the expense of a small increase in detection time.

Review of Fabric Defect Detection Based on Computer Vision

In textile inspection field,the fabric defect refers to the destruction of the texture structure on the fabric surface.The technology of computer vision makes it possible to detect defects automatically.Firstly,the overall structure of the fabric defect detection system is introduced and some mature detection systems are studied.Then the fabric detection methods are summarized,including structural methods,statistical methods,frequency domain methods,model methods and deep learning methods.In addition,the evaluation criteria of automatic detection algorithms are discussed and the characteristics of various algorithms are analyzed.Finally,the research status of this field is discussed,and the future development trend is predicted.

Strain-induced magnetism in ReS_2 monolayer with defects

We investigate the effects of strain on the electronic and magnetic properties of ReS2 monolayer with sulfur vacancies using density functional theory.Unstrained ReS2 monolayer with monosulfur vacancy（Vs） and disulfur vacancy（V（2S））both are nonmagnetic.However,as strain increases to 8%,VS-doped ReS2 monolayer appears a magnetic half-metal behavior with zero total magnetic moment.In particular,for V（2S）-doped ReS2 monolayer,the system becomes a magnetic semiconductor under 6%strain,in which Re atoms at vicinity of vacancy couple anti-ferromagnetically with each other,and continues to show a ferromagnetic metal characteristic with total magnetic moment of 1.60μb under 7%strain.Our results imply that the strain-manipulated ReS2 monolayer with VS and V（2S） can be a possible candidate for new spintronic applications.

A Novel One-Dimensional Projection Based Method for Fabric Texture Representation

Automated defect detection in woven fabrics for quality control is still a challenging novelty detection problem,while the efficient representation of fabric texture is essential for it.This paper presents a novel method for fabric texture representation.Benefiting from the characteristics of the weaving process,the major texture information of woven fabric is concentrated in the warp and weft directions.Thus,the proposed method is firstly to project the image patch along warp and weft directions to obtain projected vectors containing warp and weft informations.Secondly,the obtained vectors instead of image patch,are used to extract the features that are able to represent fabric texture.Finally,the t-test is applied to verifying the usefulness of the proposed method in discriminating defective and normal fabric textures.The experiments on various defective samples demonstrate that the method yields a robust and good performance in representing fabric texture and discriminating defects.

An Enhanced Nonlocal Self-Similarity Technique for Fabric Defect Detection

Fabric defect detection has been an indispensable and important link in fabric production,many studies on the development of vision based automated inspection techniques have been reported.The main drawback of existing methods is that they can only inspect a particular type of fabric pattern in controlled environment.Recently,nonlocal self-similarity(NSS)based method is used for fabric defect detection.This method achieves good defect detection performance for small defects with uneven illumination,the disadvantage of NNS based method is poor for detecting linear defects.Based on this reason,we improve NSS based defect detection method by introducing a gray density function,namely an enhanced NSS(ENSS)based defect detection method.Meanwhile,mean filter is applied to smooth images and suppress noise.Experimental results prove the validity and feasibility of the proposed NLRA algorithm.

Scheme for Designing the 1-D Convolution Window of Gabor Filter

A scheme for designing one-dimensional (1-D) convolution window of the circularly symmetric Gabor filter which is directly obtained from frequency domain is proposed. This scheme avoids the problem of choosing the sampling frequency in the spatial domain, or the sampling frequency must be determined when the window data is obtained by means of sampling the Gabor function, the impulse response of the Gabor filter. In this scheme, the discrete Fourier transform of the Gabor function is obtained by discretizing its Fourier transform. The window data can be derived by minimizing the sums of the squares of the complex magnitudes of difference between its discrete Fourier transform and the Gabor function's discrete Fourier transform. Not only the full description of this scheme but also its application to fabric defect detection are given in this paper. Experimental results show that the 1-D convolution windows can be used to significantly reduce computational cost and greatly ensure the quality of the Gabor filters. So this scheme can be used in some real-time processing systems.

Fabric Defect Detection Using Independent Component Analysis and Phase Congruency

A novel method based on independent component analysis and phase congruency is proposed for detecting defects in textile fabric images. By independent component, we can obtain textile structural features of fabric-free images. By phase congru- ency, structure information is reduced, which can distinguish the defect region from the defect-free regions. Finally, we have the detecting result from binary image which is obtained by a thresh- old step, Compared with other algorithms, the proposed method not only has robustness with high detection rate, but also detects various types of defects quite well.

Semantic Segmentation Using DeepLabv3+ Model for Fabric Defect Detection

Currently, numerous automatic fabric defect detection algorithms have been proposed. Traditional machine vision algorithms that set separate parameters for different textures and defects rely on the manual design of corresponding features to complete the detection. To overcome the limitations of traditional algorithms, deep learning-based correlative algorithms can extract more complex image features and perform better in image classification and object detection. A pixel-level defect segmentation methodology using DeepLabv3+, a classical semantic segmentation network, is proposed in this paper. Based on ResNet-18,ResNet-50 and Mobilenetv2, three DeepLabv3+ networks are constructed, which are trained and tested from data sets produced by capturing or publicizing images. The experimental results show that the performance of three DeepLabv3+ networks is close to one another on the four indicators proposed(Precision, Recall, F1-score and Accuracy), proving them to achieve defect detection and semantic segmentation, which provide new ideas and technical support for fabric defect detection.

Global Fabric Defect Detection Based on Unsupervised Characterization

Fabric texture intelligent analysis comprises the following characteristics:objective detection results,high detection efficiency,and accuracy.It is significantly vital to replace manual inspection for smart green manufacturing in the textile industry,such as quality control and rating,and online testing.For detecting the global image,an unsupervised method is proposed to characterize the woven fabric texture image,which is the combination of principal component analysis(PCA)and dictionary learning.First of all,the PCA approach is used to reduce the dimension of fabric samples,the obtained eigenvector is used as the initial dictionary,and then the dictionary learning method is operated on the defect-free region to get the standard templates.Secondly,the standard templates are optimized by choosing the appropriate dictionary size to construct a fabric texture representat ion model that can effectively characterize the defec-free texture region,while ineffectively representing the defective sector.That is to say,through the mechanism of identifying normal texture from imperfect texture,a learned dictionary with robustness and discrimination is obtained to adapt the fabric texture.Thirdly,after matching the detected image with the standard templates,the average filter is used to remove the noise and suppress the background texture,while retaining and enhancing the defect region.In the final part,the image segmentation is operated to identify the defect.The experimental results show that the proposed algorithm can adequately inspect fabrics with defects such as holes,oil stains,skipping,other defective types,and non-defective materials,while the detection results are good and the algorithrm can be operated flexibly.