ion technique of interference fringes used in phase modulation and phase scanning modulation interferometer is presented. For the measurement of amplitudes of interference fringes, fringes are fitted and their central...ion technique of interference fringes used in phase modulation and phase scanning modulation interferometer is presented. For the measurement of amplitudes of interference fringes, fringes are fitted and their central points are determined automatically according to their distribution rules. However, for the measurement of their phases, fringes should be recognized and processed with different calculating algorithms and least square optimization methods depending on the scanning modulation mode. When this technique is used for measurement of surface roughness, the measurement uncertainty is better than 5nm and the repeatability is less than 5%.展开更多
A surface plasmon interference lithography assisted by a Fabry-Perot （F-P） cavity composed of subwavelength metal gratings and a thin metal fihn is proposed to fabricate high-quality nanopatterns. The calculated res...A surface plasmon interference lithography assisted by a Fabry-Perot （F-P） cavity composed of subwavelength metal gratings and a thin metal fihn is proposed to fabricate high-quality nanopatterns. The calculated results indicate that uniform straight interference fringes with high contrast and high electric-field intensity are formed in the resist under the F-P cavity. The analyses of spatial frequency spectra illuminate the physical mechanism of the formation for the interference fringes. The influence of the F-P cavity spacing is discussed in detail. Moreover, the error analyses reveal that all parameters except the metal grating period in this scheme can bear large tolerances for the device fabrication.展开更多
A method was proposed to analyze the influences of the non-ideal spectroscopic performance of optical components and orientation errors of a laser tracing measurement optical system on the tracing measurement performa...A method was proposed to analyze the influences of the non-ideal spectroscopic performance of optical components and orientation errors of a laser tracing measurement optical system on the tracing measurement performance.A comprehensive model of the interference fringe contrast based on the laser tracing system s measurement principle was established in this study.Simulation results based on ZEMAX verified the model.According to the simulation results,the placement angle of the analyzer had a direct influence on the interference fringe contrast.When the angle of the polarized light to the analyzer’s transmission axis increased from 65°to 85°,each contrast of the four-way interference fringes decreased from 0.9996 to 0.3528,the interference fringe contrast is decreased by 65%.Under the split ratio of beam splitters in the interference part(BS 1)of 5∶5,when the splitting ratio of BS 2 changed from 2∶8 to 8∶2,the fringe contrast of the interference signals received by the photodetectors increased,but the injection light intensity onto the PSD reflected by BS 2 decreased.The significant influence of the tracing performance was verified by the experiments.When splitting ratio of BS 2 increased,the contrast of the interference fringes increased.Due to the weakening of the incident light intensity of the PSD caused by the change of BS 2 splitting ratio,the response time of the tracing system is increased by 23.7 ms.As a result,the tracing performance of the laser tracing measurement optical system was degraded.An important theoretical basis was provided to evaluate and improve the accuracy and reliability of laser tracing measurement systems.展开更多
Multiple-beam fringes of equal chromatic order interferometry is a powerful technique to extract optical properties over a continuous range of spectrum. In this paper we develop a theory for the spectral shape of the ...Multiple-beam fringes of equal chromatic order interferometry is a powerful technique to extract optical properties over a continuous range of spectrum. In this paper we develop a theory for the spectral shape of the fringes of equal chromatic order (FECO) that are formed across a double-clad fiber. The modified single term Sellmeier dispersion formula is used to construct the refractive index dispersion curves for the liquid, claddings, and core. Expressions for the paraxial optical path length for several rays passing through the fiber and the liquid are developed. The condition of bright fringe is applied to get an analytical expression for the spectral shape of the FECO across a double-clad fiber with an elliptical/circular inner cladding. A potential application of this theory is to determine the dispersion of Kerr constant of the claddings and the core of the fiber. To illustrate the theory and its application, simulation examples are provided and discussed.展开更多
The principles and applications of laser real-time holographic interferometry （LRTHI） and radar differential interferometry （RDI） technologies are described in this paper, respectively. By using LRTHI, we can obse...The principles and applications of laser real-time holographic interferometry （LRTHI） and radar differential interferometry （RDI） technologies are described in this paper, respectively. By using LRTHI, we can observe the deformation of samples under pressure in the lab and study the anomaly characteristics relating to different strain fields in different fracture-developing areas; while by using RDI, we can observe the landform and surface deformation. The results of deformation observed before and after the Ms=7.9 Mani earthquake （Tibet） and Ms=6.2 Shangyi-Zhangbei earthquake in China are obtained. It is pointed out that LRTHI and RDi are similar, which study the characteristics of anomalous deformation field by fringe variations for both of them. Therefore, the observation of deformation field in the seismogenic process, especially in the period impending an earthquake by RDI, and the comparative study in the lab by LRTHI are of great significance.展开更多
This paper formulates the light timing calculations for each interferometer arm;one that is parallel to the direction of motion of the interferometer through space and the other that is perpendicular. The calculations...This paper formulates the light timing calculations for each interferometer arm;one that is parallel to the direction of motion of the interferometer through space and the other that is perpendicular. The calculations are done for a vacuum-mode interferometer and then for a gas-mode interferometer. The calculations show that no light timing difference is detectable in a vacuum-mode interferometer, but once an optical medium is present in the light path down the arms of the interferometer, this is no longer the case and a timing difference is detectable. Further to this, the timing equations obtained from the analysis are used to model the historical experiments of Michelson-Morley and Miller (Mt Wilson) and predictions are made by the model that accurately match the actual recorded results from those experiments. Thus, this timing analysis confirms that there is a light speed anisotropy in a reference frame that is moving through space, indicating the presence of a preferred Aether reference frame through which the Earth is moving.展开更多
Measurements of frictional resistance play an important role in engineering practice. There are several types of air resistance acting on an aircraft, for example. One of them, frictional resistance, accounts for half...Measurements of frictional resistance play an important role in engineering practice. There are several types of air resistance acting on an aircraft, for example. One of them, frictional resistance, accounts for half of the air resistance. Oil film interferometry is one of methods for measuring the frictional resistance. Oil dropped on an object is thinly stretched by the frictional resistance. The bright and dark fringe pattern is generated when monochromatic light is applied to the oil film. The gradient of the oil thickness decreases with the lapse of time, and thus the spacing between neighboring the dark lines increases. The rate at which the spacing increases is proportional to the frictional resistance. In this study, the frictional resistance acting on a small area on a plate was measured and compared with the theoretical value. As a result, these results qualitatively agree well with each other.展开更多
This research proposes a simple and practical method to make low-stray-light gratings, where the substrate shifts about a 1 mm distance in the direction parallel or perpendicular to the exposure interference fringes. ...This research proposes a simple and practical method to make low-stray-light gratings, where the substrate shifts about a 1 mm distance in the direction parallel or perpendicular to the exposure interference fringes. When the substrate shifts, a reference grating next to the substrate is used to adjust in real time the phase of the exposure interference fringes relative to the substrate. Shifting eliminates the exposure defects and therefore decreases the stray light of gratings. Several gratings are successfully made by using this method, which have straighter grooves,smoother surfaces, and lower stray light than gratings made in conventional interference lithography.展开更多
An optical micro electron mechanical system （MEMS） pressure sensor with a mesa membrane is presented. The operating principle of the MEMS pressure sensor is expatiated by the Fabry-Perot （F-P） interference and the...An optical micro electron mechanical system （MEMS） pressure sensor with a mesa membrane is presented. The operating principle of the MEMS pressure sensor is expatiated by the Fabry-Perot （F-P） interference and the relation between deflection and pressure is analyzed. Both the mechanical model of the mesa structure diaphragm and the signal averaging effect is validated by simulation, which declares that the mesa structure diaphragm is superior to the planar one on the parallelism and can reduce the signal averaging effect. Experimental results demonstrate that the mesa structure sensor has a reasonable linearity and sensitivity.展开更多
长波红外差分干涉仪在低温工况下会因光学元件受到非均匀应力作用产生干涉条纹的畸变,从而降低干涉仪系统性能。本文为解决低温工况干涉条纹弯曲畸变问题,基于长波红外差分干涉仪光机系统进行了干涉条纹畸变影响因素分析,结合光-机-热...长波红外差分干涉仪在低温工况下会因光学元件受到非均匀应力作用产生干涉条纹的畸变,从而降低干涉仪系统性能。本文为解决低温工况干涉条纹弯曲畸变问题,基于长波红外差分干涉仪光机系统进行了干涉条纹畸变影响因素分析,结合光-机-热耦合分析方法,对干涉仪系统低温工作状态进行仿真。随后设计了针对影响条纹畸变的关键元件——光栅元件的低温微应力动态稳定支撑安装结构,结构优化后的光栅表面面形均方根(Root Mean Square,RMS)值为3.89×10^(-2) nm,面形峰谷值(Peak to Valley,PV)值为2.21×10^(-1) nm,分别较优化前初始系统的分析结果减小了5个数量级,系统仿真干涉条纹畸变小于1个探测器像元。全系统低温验证试验表明,优化结构可有效抑制干涉条纹畸变,畸变量小于2个探测器像元,试验与仿真计算结果一致性较好,验证了优化分析方法的有效性。该优化方案对提升反射式光学系统结构低温稳定性,提高系统工作能力有较大意义和价值。展开更多
Flexible photodetectors(PDs)are indispensable components for next-generation wearable electronics.Recently,two-dimensional(2D)materials have been implemented as functional flexible optoelectronic devices due to their ...Flexible photodetectors(PDs)are indispensable components for next-generation wearable electronics.Recently,two-dimensional(2D)materials have been implemented as functional flexible optoelectronic devices due to their characteristics of atomically thin layers,excellent flexibility,and strain sensitivity.In this work,we developed a flexible photodetector based on MoS_(2)/NiO heterojunction,and Fabry-Perot(F-P)and piezo-phototronic effect have been employed to enhance the responsivity(R)and external quantum efficiency(EQE)of the devices.The F-P effect is utilized to improve the optical absorption of the MoS_(2),resulting in an enhancement in the photoluminescence(PL)of monolayer MoS_(2) and the EQE of the photodetector by 30 and 130 times,respectively.The flexible photodetector exhibits an ultrahigh detectivity(D*)of 2.6×10^(14) Jones,which is the highest value ever reported for flexible MoS_(2) PDs.The piezo-potential of monolayer MoS_(2) decreases the valence band offset at the interface of MoS_(2)/NiO,which increases the transfer efficiency of the photon-generated carriers significantly.Under 1.17%tensile strain,the R of the flexible photodetector can be enhanced by 271%.This research may provide a universal strategy for the design and performance optimization of 2D materials heterostructures for flexible optoelectronics.展开更多
文摘ion technique of interference fringes used in phase modulation and phase scanning modulation interferometer is presented. For the measurement of amplitudes of interference fringes, fringes are fitted and their central points are determined automatically according to their distribution rules. However, for the measurement of their phases, fringes should be recognized and processed with different calculating algorithms and least square optimization methods depending on the scanning modulation mode. When this technique is used for measurement of surface roughness, the measurement uncertainty is better than 5nm and the repeatability is less than 5%.
基金Supported by the Natural Science Foundation of Hebei Province under Grant Nos A2013402069 and A2013402081
文摘A surface plasmon interference lithography assisted by a Fabry-Perot （F-P） cavity composed of subwavelength metal gratings and a thin metal fihn is proposed to fabricate high-quality nanopatterns. The calculated results indicate that uniform straight interference fringes with high contrast and high electric-field intensity are formed in the resist under the F-P cavity. The analyses of spatial frequency spectra illuminate the physical mechanism of the formation for the interference fringes. The influence of the F-P cavity spacing is discussed in detail. Moreover, the error analyses reveal that all parameters except the metal grating period in this scheme can bear large tolerances for the device fabrication.
基金Sponsored by the National Natural Science Foundation of China(Grant No.52175491).
文摘A method was proposed to analyze the influences of the non-ideal spectroscopic performance of optical components and orientation errors of a laser tracing measurement optical system on the tracing measurement performance.A comprehensive model of the interference fringe contrast based on the laser tracing system s measurement principle was established in this study.Simulation results based on ZEMAX verified the model.According to the simulation results,the placement angle of the analyzer had a direct influence on the interference fringe contrast.When the angle of the polarized light to the analyzer’s transmission axis increased from 65°to 85°,each contrast of the four-way interference fringes decreased from 0.9996 to 0.3528,the interference fringe contrast is decreased by 65%.Under the split ratio of beam splitters in the interference part(BS 1)of 5∶5,when the splitting ratio of BS 2 changed from 2∶8 to 8∶2,the fringe contrast of the interference signals received by the photodetectors increased,but the injection light intensity onto the PSD reflected by BS 2 decreased.The significant influence of the tracing performance was verified by the experiments.When splitting ratio of BS 2 increased,the contrast of the interference fringes increased.Due to the weakening of the incident light intensity of the PSD caused by the change of BS 2 splitting ratio,the response time of the tracing system is increased by 23.7 ms.As a result,the tracing performance of the laser tracing measurement optical system was degraded.An important theoretical basis was provided to evaluate and improve the accuracy and reliability of laser tracing measurement systems.
文摘Multiple-beam fringes of equal chromatic order interferometry is a powerful technique to extract optical properties over a continuous range of spectrum. In this paper we develop a theory for the spectral shape of the fringes of equal chromatic order (FECO) that are formed across a double-clad fiber. The modified single term Sellmeier dispersion formula is used to construct the refractive index dispersion curves for the liquid, claddings, and core. Expressions for the paraxial optical path length for several rays passing through the fiber and the liquid are developed. The condition of bright fringe is applied to get an analytical expression for the spectral shape of the FECO across a double-clad fiber with an elliptical/circular inner cladding. A potential application of this theory is to determine the dispersion of Kerr constant of the claddings and the core of the fiber. To illustrate the theory and its application, simulation examples are provided and discussed.
基金Joint Seismological Science Foundation of China (201012).
文摘The principles and applications of laser real-time holographic interferometry （LRTHI） and radar differential interferometry （RDI） technologies are described in this paper, respectively. By using LRTHI, we can observe the deformation of samples under pressure in the lab and study the anomaly characteristics relating to different strain fields in different fracture-developing areas; while by using RDI, we can observe the landform and surface deformation. The results of deformation observed before and after the Ms=7.9 Mani earthquake （Tibet） and Ms=6.2 Shangyi-Zhangbei earthquake in China are obtained. It is pointed out that LRTHI and RDi are similar, which study the characteristics of anomalous deformation field by fringe variations for both of them. Therefore, the observation of deformation field in the seismogenic process, especially in the period impending an earthquake by RDI, and the comparative study in the lab by LRTHI are of great significance.
文摘This paper formulates the light timing calculations for each interferometer arm;one that is parallel to the direction of motion of the interferometer through space and the other that is perpendicular. The calculations are done for a vacuum-mode interferometer and then for a gas-mode interferometer. The calculations show that no light timing difference is detectable in a vacuum-mode interferometer, but once an optical medium is present in the light path down the arms of the interferometer, this is no longer the case and a timing difference is detectable. Further to this, the timing equations obtained from the analysis are used to model the historical experiments of Michelson-Morley and Miller (Mt Wilson) and predictions are made by the model that accurately match the actual recorded results from those experiments. Thus, this timing analysis confirms that there is a light speed anisotropy in a reference frame that is moving through space, indicating the presence of a preferred Aether reference frame through which the Earth is moving.
文摘Measurements of frictional resistance play an important role in engineering practice. There are several types of air resistance acting on an aircraft, for example. One of them, frictional resistance, accounts for half of the air resistance. Oil film interferometry is one of methods for measuring the frictional resistance. Oil dropped on an object is thinly stretched by the frictional resistance. The bright and dark fringe pattern is generated when monochromatic light is applied to the oil film. The gradient of the oil thickness decreases with the lapse of time, and thus the spacing between neighboring the dark lines increases. The rate at which the spacing increases is proportional to the frictional resistance. In this study, the frictional resistance acting on a small area on a plate was measured and compared with the theoretical value. As a result, these results qualitatively agree well with each other.
基金supported by the National Natural Science Foundation of China under Grant No.51427805
文摘This research proposes a simple and practical method to make low-stray-light gratings, where the substrate shifts about a 1 mm distance in the direction parallel or perpendicular to the exposure interference fringes. When the substrate shifts, a reference grating next to the substrate is used to adjust in real time the phase of the exposure interference fringes relative to the substrate. Shifting eliminates the exposure defects and therefore decreases the stray light of gratings. Several gratings are successfully made by using this method, which have straighter grooves,smoother surfaces, and lower stray light than gratings made in conventional interference lithography.
文摘An optical micro electron mechanical system （MEMS） pressure sensor with a mesa membrane is presented. The operating principle of the MEMS pressure sensor is expatiated by the Fabry-Perot （F-P） interference and the relation between deflection and pressure is analyzed. Both the mechanical model of the mesa structure diaphragm and the signal averaging effect is validated by simulation, which declares that the mesa structure diaphragm is superior to the planar one on the parallelism and can reduce the signal averaging effect. Experimental results demonstrate that the mesa structure sensor has a reasonable linearity and sensitivity.
文摘长波红外差分干涉仪在低温工况下会因光学元件受到非均匀应力作用产生干涉条纹的畸变,从而降低干涉仪系统性能。本文为解决低温工况干涉条纹弯曲畸变问题,基于长波红外差分干涉仪光机系统进行了干涉条纹畸变影响因素分析,结合光-机-热耦合分析方法,对干涉仪系统低温工作状态进行仿真。随后设计了针对影响条纹畸变的关键元件——光栅元件的低温微应力动态稳定支撑安装结构,结构优化后的光栅表面面形均方根(Root Mean Square,RMS)值为3.89×10^(-2) nm,面形峰谷值(Peak to Valley,PV)值为2.21×10^(-1) nm,分别较优化前初始系统的分析结果减小了5个数量级,系统仿真干涉条纹畸变小于1个探测器像元。全系统低温验证试验表明,优化结构可有效抑制干涉条纹畸变,畸变量小于2个探测器像元,试验与仿真计算结果一致性较好,验证了优化分析方法的有效性。该优化方案对提升反射式光学系统结构低温稳定性,提高系统工作能力有较大意义和价值。
基金The authors thank for the support of the National Natural Science Foundation of China(Nos.11674290,U1704138,61804136,U1804155,and 11974317)Henan Science Fund for Distinguished Young Scholars(No.212300410020)+1 种基金Key Project of Henan Higher Education(No.21A140001)the Zhengzhou University Physics Discipline Improvement Program,and China Postdoctoral Science Foundation(Nos.2018M630829 and 2019T120630).
文摘Flexible photodetectors(PDs)are indispensable components for next-generation wearable electronics.Recently,two-dimensional(2D)materials have been implemented as functional flexible optoelectronic devices due to their characteristics of atomically thin layers,excellent flexibility,and strain sensitivity.In this work,we developed a flexible photodetector based on MoS_(2)/NiO heterojunction,and Fabry-Perot(F-P)and piezo-phototronic effect have been employed to enhance the responsivity(R)and external quantum efficiency(EQE)of the devices.The F-P effect is utilized to improve the optical absorption of the MoS_(2),resulting in an enhancement in the photoluminescence(PL)of monolayer MoS_(2) and the EQE of the photodetector by 30 and 130 times,respectively.The flexible photodetector exhibits an ultrahigh detectivity(D*)of 2.6×10^(14) Jones,which is the highest value ever reported for flexible MoS_(2) PDs.The piezo-potential of monolayer MoS_(2) decreases the valence band offset at the interface of MoS_(2)/NiO,which increases the transfer efficiency of the photon-generated carriers significantly.Under 1.17%tensile strain,the R of the flexible photodetector can be enhanced by 271%.This research may provide a universal strategy for the design and performance optimization of 2D materials heterostructures for flexible optoelectronics.
