Exciton-polaritons in a 2D hybrid organic-inorganic perovskite microcavity with the presence of optical Stark effect

This study investigates the properties of exciton-polaritons in a two-dimensional(2D)hybrid organic-inorganic perovskite microcavity in the presence of optical Stark effect.Through both steady and dynamic state analyses,strong coupling between excitons of perovskite and cavity photons is revealed,indicating the formation of polaritons in the perovskite microcavity.Besides,it is found that an external optical Stark pulse can induce energy shifts of excitons proportional to the pulse intensity,which modifies the dispersion characteristics of the polaritons.

Smart Microcavity on the Tip of Multi-Core Optical Fiber for Gas Sensing

We designed and fabricated a smart microcavity sensor with a vertically coupled structure on the end face of a multi-core fiber using two-photon lithography technology. The influence of gap in vertical coupling structure on the resonance characteristics of bonding and anti-bonding modes in the transmission spectrum was studied through simulation and experiments. The results indicate that the bonding and anti-bonding modes generated by the vertical coupling of the two microcavities, as well as the changes in the radius and refractive index of the micro-toroid, and the distance between the microcavities caused by the absorption of vapor during the gas sensing process, exhibit different wavelength shifts for the two resonant modes. Smart microcavity sensors exhibit sensitivity and sensing characteristics. .

Optical Tamm state polaritons in a quantum well microcavity with gold layers

A new type of cavity polariton,the optical Tamm state（OTS） polariton,is proposed to be realized by sandwiching a quantum well（QW） between a gold layer and a distributed Bragg reflector（DBR）.It is shown that OTS polaritons can be generated from the strong couplings between the QW excitons and the free OTSs.In addition,if a second gold layer is introduced into the bottom of the DBR,two independent free OTSs can interact strongly with the QW excitons to produce extra OTS polaritons.

Tubular/helical architecture construction based on rolled-up AlN nanomembranes and resonance as optical microcavity

Aluminum nitride(AlN)has attracted a great amount of interest due to the fact that these group III–V semiconductors present direct band gap behavior and are compatible with current micro-electro-mechanical systems.In this work,three dimensional(3D)AlN architectures including tubes and helices were constructed by rolling up AlN nanomembranes grown on a silicon-on-insulator wafer via magnetron sputtering.The properties of the AlN membrane were characterized through transmission electron microscopy and X-ray diffraction.The thickness of AlN nanomembranes could be tuned via the RIE thinning method,and thus micro-tubes with different diameters were fabricated.The intrinsic strain in AlN membranes was investigated via micro-Raman spectroscopy,which agrees well with theory prediction.Whispering gallery mode was observed in AlN tubular optical microcavity in photoluminescence spectrum.A postprocess involving atomic layer deposition and R6G immersion were employed on as-fabricated AlN tubes to promote the Q-factor.The AlN tubular micro-resonators could offer a novel design route for Si-based integrated light sources.In addition,the rolled-up technology paves a new way for AlN 3D structure fabrication,which is promising for AlN application in MEMS and photonics fields.

Large Rabi splitting obtained in Ag‐WS2 strong‐coupling heterostructure with optical microcavity at room temperature

Manipulation of light-matter interaction is critical in modern physics, especially in the strong coupling regime, where the generated half-light, half-matter bosonic quasiparticles as polaritons are important for fundamental quantum science and applications of optoelectronics and nonlinear optics. Two-dimensional transition metal dichalcogenides (TMDs) are ideal platforms to investigate the strong coupling because of their huge exciton binding energy and large absorption coefficients. Further studies on strong exciton-plasmon coupling by combining TMDs with metallic nanostructures have generated broad interests in recent years. However, because of the huge plasmon radiative damping, the observation of strong coupling is significantly limited at room temperature. Here, we demonstrate that a large Rabi splitting (~300 meV) can be achieved at ambient conditions in the strong coupling regime by embedding Ag-WS2 heterostructure in an optical microcavity. The generated quasiparticle with part-plasmon, part-exciton and part-light is analyzed with Hopfield coefficients that are calculated by using three-coupled oscillator model. The resulted plasmon-exciton polaritonic hybrid states can efficiently enlarge the obtained Rabi splitting, which paves the way for the practical applications of polaritonic devices based on ultrathin materials.

Variable optical chirality in atomic assisted microcavity

The manipulating of optical waves in a microcavity is essential to developing the integrated optical devices.Generally,the two eigenmodes in a whispering-gallery-mode(WGM)microcavity possess chiral symmetry.Here we show the chiral symmetry breaking is induced by the asymmetric backscattering of counter-propagating optical waves in a whisperinggallery-mode(WGM)microcavity with a cavity-made slot filled with atomic vapor.Through tuning the dispersion relation of the atomic vapor in the cavity-made slot,the chiral modes are continuously steered.The mode frequency splitting in the transmission and reflection spectra stem from the chiral symmetry breaking of the two eigenmodes.The displacement sensitivity of the proposed system in response to the length variation of cavity-made slot exhibits a high sensitivity value of 15.22 THz/nm.

Sensitivity to external optical feedback of circular-side hexagonal resonator microcavity laser

The sensitivity to fault reflection is very important for larger dynamic range in fiber fault detection technique.Using time delay signature(TDS)of chaotic laser formed by optical feedback can solve the sensitivity limitation of photodetector in fiber fault detection.The TDS corresponds to the feedback position and the fault reflection can be detected by the laser diode.The sensitivity to feedback level of circular-side hexagonal resonator(CSHR)microcavity laser is numerically simulated and the feedback level boundaries of each output dynamic state are demonstrated.The peak level of TDS is utilized to analyze the sensitivity.The demonstration is presented in two aspects:the minimum feedback level when the TDS emerges and the variation degree of TDS level on feedback level changing.The results show that the CSHR microcavity laser can respond to the feedback level of 0.07%,corresponding to-63-dB feedback strength.Compared to conventional distributed feedback laser,the sensitivity improves almost 20 dB due to the shorter internal cavity length of CSHR microcavity laser.Moreover,1%feedback level changing will induce 1.001 variation on TDS level,and this variation degree can be influenced by other critical internal parameters(active region side length,damping rate,and linewidth enhancement factor).

Effect of Optical Microcavity on Absorption Behavior of Homo-Tandem Organic Solar Cells

The optical microcavity effect of the homo-tandem solar cells is explored utilizing the transfer matrix method. Ultrathin silver can reduce the deadzone effect compared with graphene and PH1000, and leads to a factor of 1.07 enhancement for an electrical field in a metal microcavity. The enhancement is considered to be the fact that strong exciton-photon coupling occurs in the microcavity due to ultrathin Ag. On the basis of the optical enhancement effect, optical behaviors are manipulated by varying the microcavity length. It is confirmed that ultrathin silver can serve as an ideal interconnection layer as the active layer is ～ 150nm thick and the thickness ratio between front and rear active layers lies between 1：1 and 1：2.

Trapping and Cooling of Single Atoms in an Optical Microcavity by a Magic-Wavelength Dipole Trap

We present trapping and cooling of single cesium atoms inside a microcavity by means of an intracavity far-off- resonance trap （FORT）. By the ＇magic＇ wavelength FORT, we achieve state-insensitive single-atom trapping and cooling in a microeavity. The cavity transmission of the probe beam strongly coupled to single atoms enables us to continuously observe the intracavity atom trapping. The average atomic localization time inside the bright FORT is about 7ms by introducing cavity cooling with appropriate detuning. This experiment presents great potential in coherent state manipulation for strongly coupled atom photon systems in the context of cavity quantum electrodynamics.

A novel dual-channel thermo-optic locking method for the whispering gallery mode microresonator

Mode locking can be effectively achieved by using the thermo-optic effects in the whispering gallery mode(WGM)optical microcavity,without the help of external equipment.Therefore,it has the advantages of small size,low integration costs,and self-locking,which shows great potential for application.However,the conventional single-channel microcavity thermal-locking method that relies solely on internal thermal balance will inevitably be disturbed by the external environment.This limitation affects the locking time and stability.Therefore,in this paper,we propose a new method for closed-loop thermal locking of a dual-channel microcavity.The thermal locking of the signal laser and the thermal regulation of the control laser are carried out respectively by synchronously drawing a dual-path tapered fiber.The theoretical model of the thermal dynamics of the dual-channel microcavity system is established,and the influence of the control-laser power on the thermal locking of the signal laser is confirmed.The deviation between the locking voltage of the signal laser and the set point value is used as a closed-loop feedback parameter to achieve long-term and highly stable mode locking of the signal laser.The results show that in the 2.63 h thermal-locking test,the locking stability is an order of magnitude higher than that of the single tapered fiber.This solution addresses the issue of thermal locking being disrupted by the external environment,and offers new possibilities for important applications such as spectroscopy and micro-optical sensor devices.

Asymmetrical Fabry-Perot cavity slot micro-ring resonator and its sensing characteristics

To achieve high quality factor and high-sensitivity refractive index sensor,a slot micro-ring resonator(MRR)based on asymmetric Fabry-Perot(FP)cavity was proposed.The structure consisted of a pair of elliptical holes to form an FP cavity and a microring resonator.The two different optical modes generated by the micro-ring resonator were destructively interfered to form a Fano line shape,which improved the system sensitivity while obtaining a higher quality factor and extinction ratio.The transmission principle of the structure was analyzed by the transfer matrix method.The transmission spectrum and mode field distribution of the proposed structure were simulated by the finite difference time domain(FDTD)method,and the key structural parameters affecting the Fano line shape in the device were optimized.The simulation results show that the quality factor of the device reached 22037.1,and the extinction ratio was 23.9 dB.By analyzing the refractive index sensing characteristics,the sensitivity of the structure was 354 nm·RIU−1,and the detection limit of the sensitivity was 2×10−4 RIU.Thus,the proposed compact asymmetric FP cavity slot micro-ring resonator has obvious advantages in sensing applications owing to its excellent performance.

Mesa Diaphragm-Based Fabry-Perot Optical MEMS Pressure Sensor

An optical micro electron mechanical system （MEMS） pressure sensor with a mesa membrane is presented. The operating principle of the MEMS pressure sensor is expatiated by the Fabry-Perot （F-P） interference and the relation between deflection and pressure is analyzed. Both the mechanical model of the mesa structure diaphragm and the signal averaging effect is validated by simulation, which declares that the mesa structure diaphragm is superior to the planar one on the parallelism and can reduce the signal averaging effect. Experimental results demonstrate that the mesa structure sensor has a reasonable linearity and sensitivity.

Spatiotemporal evolution of continuous-wave field and dark soliton formation in a microcavity with normal dispersion

Stable dark soliton and dark pulse formation in normally dispersive and red-detuned microcavities are investigated by numerically solving the normalized Lugiato-Lefever equation. The soliton essence is proved by fitting the calculated field intensity profile with the analytical formula of a dark soliton. Meanwhile, we find that a dark soliton can be generated either from the nonlinear evolution of an optical shock wave or narrowing of a locally broad dark pulse with smoother fronts. Explicit analytical expression is obtained to describe the oscillatory fronts of the optical shock wave. Furthermore,from the calculation results, we show that for smaller frequency detunings, e.g., α 3, in addition to the dark soliton formation, a single dark pulse with an oscillatory dip can also arise and propagate stably in the microcavity under proper pump detuning and pump strength combination. The existence region together with various field intensity profiles and the corresponding spectra of single dark pulse are demonstrated.

Application of Wavelet Transform in Dual-differential Optical Fiber F-P Interferometric Micro-displacement Measurement System

Based on dual-differential comparing principle, an experimental system of optical fiber F-P interferometric micro-displacement measurement is introduced. It is capable of achieving the absolute displacement measurement, and wavelet transforms is adopted as theory fundament to extract the optical F-P interferometric characteristic signal and remove the noise, so its resolution can reach 0. 01 μm in the dynamic range of 0～ 1 mm.

Lasing Behavior of BMPPV:PVK Mixture in Microcavity

The surface emitting microcavity is formed by sandwiching a polymer film containing poly(para-phenylene vinylene)(BMPPV) and poly(N-vinylcarbazole)(PVK) between a DBR with a reflectivity of 99.5% and a silver film. The sample is optically pumped by a 337.1 nm line of nitrogen laser with 10 ns pulses at 20 Hz repetition rate . The lasing phenomenon is observed in BMPPV and PVK mixture microcavity. The full width at half maximum (FWHM) is 6 nm at the peak wavelength of 460 nm. The lasing threshold energy is estimated to be about 5 μJ.

Experimental realization of strong coupling between a cold atomic ensemble and an optical fiber microcavity

The cavity quantum electrodynamics (QED) system is a promising platform for quantum optics and quantum information experiments.Its core is the strong coupling between atoms and optical cavity,which causes difficulty in the overlap between the atoms and the antinode of optical cavity mode.Here,we use a programmable movable optical dipole trap to load a cold atomic ensemble into an optical fiber microcavity and realize the strong coupling between the atoms and the optical cavity in which the coupling strength can be improved by polarization gradient cooling and adiabatic loading.By the measurement of vacuum Rabi splitting,the coupling strength can be as high as g_(N)=2π×400 MHz,which means the effective atom number is N_(eff)=16 and the collective cooperativity is C_(N)=1466.These results show that this experimental system can be used for cold atomic ensemble and cold molecule based cavity QED research.

Miniaturized Fiber-Optic Fabry-Perot Interferometer for Highly Sensitive Refractive Index Measurement

This paper presents a novel miniaturized fiber-optic Fabry-Peort interferometer （FPI） for highly sensitive refractive index measurement. This device was tested for the refractive indices of various liquids including acetone and ethanol at room temperature. The sensitivity for measurement of refractive index change of ethanol is 1138 nm/RIU at the wavelength of 1550 nm. In addition, the sensor fabrication is simple including only cleaving, splicing, and etching. The signal is stable with high visibility. Therefore, it provides a valuable tool in biological and chemical applications.

波长可调的量子点纠缠光源(特邀)

可按需产生纠缠光子对的量子光源是光量子网络中的重要组成部分。半导体量子点可确定性地产生高纠缠保真度的光子对。基于量子点构建量子网络所需的量子中继单元时,需要多个发光波长一致的高质量纠缠光源。然而量子点形貌、组分和应力的不均一性严重限制了基于量子点的量子中继器的可扩展性。国内外研究团队发展了多种量子点生长后调节技术,成功调节量子点精细结构劈裂并通过联合多个调节自由度实现多维度的调节。本文综述了目前联合多个调节自由度实现发光波长和精细结构劈裂均能调控的实验方案,总结了不同方案的调节方法和研究现状,并介绍了将量子点与光学微腔相结合通过Purcell效应能进一步提升纠缠光源的性能。最后,对该领域的未来发展进行展望。

基于二维光子晶体非线性效应的全光逻辑门

基于光子晶体非线性效应和线性干涉效应设计了全光异或、非和与逻辑门。应用反演定理拆分较复杂逻辑表达式,通过级联组合设计了全光或非门和四输入与门逻辑器件。本文利用时域有限差分法进行仿真模拟计算,对非线性环形腔的耦合特性进行了分析,然后在信号波长为1.47μm条件下设计了上述逻辑器件,且通过可扩展输入端可设计出更多输入的器件。分析了信号功率对四输入与逻辑器件逻辑功能的影响。结果表明信号光源功率在1.1 W/μm2到3.4 W/μm2之间时,输出端的逻辑对比度均大于10 dB。所设计器件响应时间最短仅1.6 ps,占用面积小,易于扩展与集成,在光处理系统和集成光路中有较大应用前景。

级联声光器件与回音壁模式微腔实现非对称传输

本文提出利用级联声光效应器和耦合回音壁模式微球腔的方案来实现非对称传输效果,并进行理论和实验验证.实验中利用加热拉锥的方式制备了两段式光纤,可同时实现声光效应的激发和回音壁模式的耦合.利用光纤中声光效应将纤芯基模中的矢量模式转换到包层高阶模式,由于基模中不同矢量模式转换包层模式的矢量模式也不同,从而产生类似双折射效果,使输出的包层模式产生偏振变化.而后通过耦合回音壁模式微腔将包层模式转换回纤芯基模.由于回音壁模式的偏振选择效果,使得相反方向入射光能量具有不同的透射特性,其传输隔离度可达17 d B.此外,对两个方向传输的透射率随偏振角度变化进行测试,测得声光效应带来的偏振变化约为80°.本文的非对称传输方案继承了声光器件响应迅速、调谐性良好的优势,同时具有全光纤结构和无工作阈值的特点,在光开关、光隔离器等场景具有重要的应用潜力.