To achieve high quality factor and high-sensitivity refractive index sensor,a slot micro-ring resonator(MRR)based on asymmetric Fabry-Perot(FP)cavity was proposed.The structure consisted of a pair of elliptical holes ...To achieve high quality factor and high-sensitivity refractive index sensor,a slot micro-ring resonator(MRR)based on asymmetric Fabry-Perot(FP)cavity was proposed.The structure consisted of a pair of elliptical holes to form an FP cavity and a microring resonator.The two different optical modes generated by the micro-ring resonator were destructively interfered to form a Fano line shape,which improved the system sensitivity while obtaining a higher quality factor and extinction ratio.The transmission principle of the structure was analyzed by the transfer matrix method.The transmission spectrum and mode field distribution of the proposed structure were simulated by the finite difference time domain(FDTD)method,and the key structural parameters affecting the Fano line shape in the device were optimized.The simulation results show that the quality factor of the device reached 22037.1,and the extinction ratio was 23.9 dB.By analyzing the refractive index sensing characteristics,the sensitivity of the structure was 354 nm·RIU−1,and the detection limit of the sensitivity was 2×10−4 RIU.Thus,the proposed compact asymmetric FP cavity slot micro-ring resonator has obvious advantages in sensing applications owing to its excellent performance.展开更多
A surface plasmon interference lithography assisted by a Fabry-Perot （F-P） cavity composed of subwavelength metal gratings and a thin metal fihn is proposed to fabricate high-quality nanopatterns. The calculated res...A surface plasmon interference lithography assisted by a Fabry-Perot （F-P） cavity composed of subwavelength metal gratings and a thin metal fihn is proposed to fabricate high-quality nanopatterns. The calculated results indicate that uniform straight interference fringes with high contrast and high electric-field intensity are formed in the resist under the F-P cavity. The analyses of spatial frequency spectra illuminate the physical mechanism of the formation for the interference fringes. The influence of the F-P cavity spacing is discussed in detail. Moreover, the error analyses reveal that all parameters except the metal grating period in this scheme can bear large tolerances for the device fabrication.展开更多
We demonstrate a fiber Fabry-Pérot cavity in the ultraviolet range, which covers the florescence wavelength for the <sup>2</sup>P to <sup>2</sup>S transition of Yb and is designed in the b...We demonstrate a fiber Fabry-Pérot cavity in the ultraviolet range, which covers the florescence wavelength for the <sup>2</sup>P to <sup>2</sup>S transition of Yb and is designed in the bad cavity limit for florescence collection. Benefiting from both the small cavity mode volume and the large atom dipole, a cavity with moderate finesse and high transmission still supports a good cooperativity, which is made and tested in experiment. Based on the measured experimental parameters, simulation performed on the cavity and ion shows a Purcell factor better than 2.5 and a single-mode fiber collection efficiency over 10%. This technology can support ultra-bright single photon sources based on trapped ions and can provide the possibility to link remote atoms as a quantum network.展开更多
The circular phased antenna array is commonly used for generating waves bearing Orbital Angular Momentum (OAM) in the radio frequency band, but it achieves a relatively low directivity. To overcome this drawback, we p...The circular phased antenna array is commonly used for generating waves bearing Orbital Angular Momentum (OAM) in the radio frequency band, but it achieves a relatively low directivity. To overcome this drawback, we present here a method to improve the directivity of an OAM circular phased antenna array by embedding it inside a Fabry-Perot cavity. The Fabry-Perot cavity contains three main parts: a partially reflecting surface (PRS), an air cavity and a ground plane. Simulation data show that the directivity of this new OAM antenna achieves an improvement of 8.2 dB over the original array. A prototype is realized and characterized. The simulated and measured characteristics are in good agreement.展开更多
The extinction ratio and insertion loss of spatial light modulator are subject to the material problem, thus limiting its applications. One reflection-type silicon-based spatial light modulator with high reflective ma...The extinction ratio and insertion loss of spatial light modulator are subject to the material problem, thus limiting its applications. One reflection-type silicon-based spatial light modulator with high reflective materials outside the Fabry-Perot cavity is demonstrated in this paper. The reflectivity values of the outside-cavity materials with different film layer numbers are simulated. The reflectivity values of 6-pair Ta2O5/SiO2 films at 1550 nm are experimentally verified to be as high as 99.9%. The surfaces of 6-pair Ta2O5/SiO2 films are smooth: their root-mean-square roughness values are as small as 0.53 nm. The insertion loss of the device at 1550 nm is only 1.2 dB. The high extinction ratio of the device at 1550 nm and 11 V is achieved to be 29.7 dB. The spatial light modulator has a high extinction ratio and low insertion loss for applications.展开更多
Multi-band microlasers based on single microcrystalline materials with Fabry-Perot(F-P) cavities are critically and technologically essential. Here, we demonstrate simultaneous dual-band lasing output(615 and 685 nm) ...Multi-band microlasers based on single microcrystalline materials with Fabry-Perot(F-P) cavities are critically and technologically essential. Here, we demonstrate simultaneous dual-band lasing output(615 and 685 nm) in metal-organic frameworks(MOFs) and organic dyes hybrid single crystals, which support F-P resonances. Through a two-step assembly strategy, two different types of cationic pyridinium hemicyanine dye molecules can be encapsulated into the channel pores of anionic bioMOF-1-2 Me successfully. In addition, the employment of the host-guest system significantly increases the dye loading, enhances luminescent efficiency, and diminishes the aggregation-caused quenching(ACQ) effect in the resultant MOFs/dye composites.This finding not only combines the characteristic of MOFs materials with excellent luminescent properties of organic dyes, but also points out a simple and promising strategy to design multi-band microlasers based on F-P mechanism, opening a low-cost avenue for the rational design of miniaturized lasers in the future.展开更多
基金supported by Natural Science Foundation of Gansu Province(No.22JR5RA320).
文摘To achieve high quality factor and high-sensitivity refractive index sensor,a slot micro-ring resonator(MRR)based on asymmetric Fabry-Perot(FP)cavity was proposed.The structure consisted of a pair of elliptical holes to form an FP cavity and a microring resonator.The two different optical modes generated by the micro-ring resonator were destructively interfered to form a Fano line shape,which improved the system sensitivity while obtaining a higher quality factor and extinction ratio.The transmission principle of the structure was analyzed by the transfer matrix method.The transmission spectrum and mode field distribution of the proposed structure were simulated by the finite difference time domain(FDTD)method,and the key structural parameters affecting the Fano line shape in the device were optimized.The simulation results show that the quality factor of the device reached 22037.1,and the extinction ratio was 23.9 dB.By analyzing the refractive index sensing characteristics,the sensitivity of the structure was 354 nm·RIU−1,and the detection limit of the sensitivity was 2×10−4 RIU.Thus,the proposed compact asymmetric FP cavity slot micro-ring resonator has obvious advantages in sensing applications owing to its excellent performance.
基金Supported by the Natural Science Foundation of Hebei Province under Grant Nos A2013402069 and A2013402081
文摘A surface plasmon interference lithography assisted by a Fabry-Perot （F-P） cavity composed of subwavelength metal gratings and a thin metal fihn is proposed to fabricate high-quality nanopatterns. The calculated results indicate that uniform straight interference fringes with high contrast and high electric-field intensity are formed in the resist under the F-P cavity. The analyses of spatial frequency spectra illuminate the physical mechanism of the formation for the interference fringes. The influence of the F-P cavity spacing is discussed in detail. Moreover, the error analyses reveal that all parameters except the metal grating period in this scheme can bear large tolerances for the device fabrication.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11274289,11325419,11474267,11404319,61327901,61225025 and 1147426the Fundamental Research Funds for the Central Universities under Grant Nos WK2470000018 and WK2030020019+2 种基金the Strategic Priority Research Program(B)of the Chinese Academy of Sciences under Grant No XDB01030300the National Youth Top Talent Support Program of National High-level Personnel of Special Support Program under Grant No BB2470000005the Anhui Provincial Natural Science Foundation under Grant No 1608085QA22
文摘We demonstrate a fiber Fabry-Pérot cavity in the ultraviolet range, which covers the florescence wavelength for the <sup>2</sup>P to <sup>2</sup>S transition of Yb and is designed in the bad cavity limit for florescence collection. Benefiting from both the small cavity mode volume and the large atom dipole, a cavity with moderate finesse and high transmission still supports a good cooperativity, which is made and tested in experiment. Based on the measured experimental parameters, simulation performed on the cavity and ion shows a Purcell factor better than 2.5 and a single-mode fiber collection efficiency over 10%. This technology can support ultra-bright single photon sources based on trapped ions and can provide the possibility to link remote atoms as a quantum network.
文摘The circular phased antenna array is commonly used for generating waves bearing Orbital Angular Momentum (OAM) in the radio frequency band, but it achieves a relatively low directivity. To overcome this drawback, we present here a method to improve the directivity of an OAM circular phased antenna array by embedding it inside a Fabry-Perot cavity. The Fabry-Perot cavity contains three main parts: a partially reflecting surface (PRS), an air cavity and a ground plane. Simulation data show that the directivity of this new OAM antenna achieves an improvement of 8.2 dB over the original array. A prototype is realized and characterized. The simulated and measured characteristics are in good agreement.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61575076 and 61804148)the National Key Research and Development Plan of China(Grant No.2016YFB0402502)
文摘The extinction ratio and insertion loss of spatial light modulator are subject to the material problem, thus limiting its applications. One reflection-type silicon-based spatial light modulator with high reflective materials outside the Fabry-Perot cavity is demonstrated in this paper. The reflectivity values of the outside-cavity materials with different film layer numbers are simulated. The reflectivity values of 6-pair Ta2O5/SiO2 films at 1550 nm are experimentally verified to be as high as 99.9%. The surfaces of 6-pair Ta2O5/SiO2 films are smooth: their root-mean-square roughness values are as small as 0.53 nm. The insertion loss of the device at 1550 nm is only 1.2 dB. The high extinction ratio of the device at 1550 nm and 11 V is achieved to be 29.7 dB. The spatial light modulator has a high extinction ratio and low insertion loss for applications.
基金supported by the National Natural Science Foundation of China (U1609219, 51432001, 51632008, 61721005)Zhejiang Provincial Natural Science Foundation (LD18E020001)
文摘Multi-band microlasers based on single microcrystalline materials with Fabry-Perot(F-P) cavities are critically and technologically essential. Here, we demonstrate simultaneous dual-band lasing output(615 and 685 nm) in metal-organic frameworks(MOFs) and organic dyes hybrid single crystals, which support F-P resonances. Through a two-step assembly strategy, two different types of cationic pyridinium hemicyanine dye molecules can be encapsulated into the channel pores of anionic bioMOF-1-2 Me successfully. In addition, the employment of the host-guest system significantly increases the dye loading, enhances luminescent efficiency, and diminishes the aggregation-caused quenching(ACQ) effect in the resultant MOFs/dye composites.This finding not only combines the characteristic of MOFs materials with excellent luminescent properties of organic dyes, but also points out a simple and promising strategy to design multi-band microlasers based on F-P mechanism, opening a low-cost avenue for the rational design of miniaturized lasers in the future.
