High-resolution multi-color printing relies upon pixelated optical nanostructures,which is crucial to promote color display by producing nonbleaching colors,yet requires simplicity in fabrication and dynamic switching...High-resolution multi-color printing relies upon pixelated optical nanostructures,which is crucial to promote color display by producing nonbleaching colors,yet requires simplicity in fabrication and dynamic switching.Antimony trisulfide(Sb_(2)S_(3))is a newly rising chalcogenide material that possesses prompt and significant transition of its optical characteristics in the visible region between amorphous and crystalline phases,which holds the key to color-varying devices.Herein,we proposed a dynamically switchable color printing method using Sb_(2)S_(3)-based stepwise pixelated Fabry-Pérot(FP)cavities with various cavity lengths.The device was fabricated by employing a direct laser patterning that is a less timeconsuming,more approachable,and low-cost technique.As switching the state of Sb_(2)S_(3) between amorphous and crystalline,the multi-color of stepwise pixelated FP cavities can be actively changed.The color variation is due to the profound change in the refractive index of Sb_(2)S_(3) over the visible spectrum during its phase transition.Moreover,we directly fabricated sub-50 nm nano-grating on ultrathin Sb_(2)S_(3) laminate via microsphere 800-nm femtosecond laser irradiation in far field.The minimum feature size can be further decreased down to~45 nm(λ/17)by varying the thickness of Sb_(2)S_(3) film.Ultrafast switchable Sb_(2)S_(3) photonic devices can take one step toward the next generation of inkless erasable papers or displays and enable information encryption,camouflaging surfaces,anticounterfeiting,etc.Importantly,our work explores the prospects of rapid and rewritable fabrication of periodic structures with nano-scale resolution and can serve as a guideline for further development of chalcogenide-based photonics components.展开更多
An alternative scheme is presented for teleportation of a two-atom entangled state in cavity quantum electrodynamics (QED). It is based on the resonant atom-cavity field interaction. In the scheme, only one cavity i...An alternative scheme is presented for teleportation of a two-atom entangled state in cavity quantum electrodynamics (QED). It is based on the resonant atom-cavity field interaction. In the scheme, only one cavity is involved, and the number of the atoms needed to be detected is decreased compared with the previous scheme. Since the resonant atom-cavity field interaction greatly reduces the interaction time, the decoherence effect can be effectively suppressed during the teleportation process. The experimental feasibility of the scheme is discussed. The scheme can easily be generalized to the teleportation of N-atom Greeninger-Horne-Zeilinger (GHZ) entangled states. The number of atoms needed to be detected does not increase as the number of the atoms in the GHZ state increases.展开更多
We demonstrated a novel method to measure the unloaded quality factor(Q factor) of high-Q resonant cavities. This method was used to obtain data with low errors and calculate the unloaded Q factor. This procedure was ...We demonstrated a novel method to measure the unloaded quality factor(Q factor) of high-Q resonant cavities. This method was used to obtain data with low errors and calculate the unloaded Q factor. This procedure was more reliable than traditional methods. The data required for the method were near the resonant frequency,not at the half-power points of the reflection coefficient curve or Smith chart. We applied the new method to measure a resonant cavity with an unloaded Q factor of^100,000, obtaining good agreement between the measured and theoretical results.展开更多
Light absorption and radiation are fundamental processes in optical science and engineering.Materials with perfect absorption properties play an important role in numerous optical applications.Following the meteoric r...Light absorption and radiation are fundamental processes in optical science and engineering.Materials with perfect absorption properties play an important role in numerous optical applications.Following the meteoric rise of MoS_(2)material,global opportunities and challenges coexist due to its extremely weak light-matter interaction capability beyond its energy band.In this work,we designed a kind of sandwich resonance structure and investigated MoS_(2)as a perfect absorber in the infrared spectrum that should be transparent according to the optical band theory.The infrared absorption properties of W or Au/MoS_(2)/Au models at 800 nm-2400 nm were systematic simulated.By optimizing the structural parameters,the resonant wavelength of perfect absorption can be modulated from 830 nm to 1700 nm with angle insensitivity and polar independence.Moreover,we discovered that the bandwidth of absorption exceeding 50%of the W-top model reaches500 nm,while that of the Au-top model is less than 100 nm,indicating that the top metal material has a great influence on the resonance absorption spectrum.Our work provides a practical route for enhancing and manipulating the light-matter interactions of low-dimensional materials beyond their own band gaps,which will be critical in the future design and implementation of optoelectronic devices and systems.展开更多
Cylindrical waveguides without end surfaces can serve as two-dimensional resonant cavities. In such cavities the electromagnetic oscillations corresponding to an eigenfrequency can always be taken as TM or TE modes ev...Cylindrical waveguides without end surfaces can serve as two-dimensional resonant cavities. In such cavities the electromagnetic oscillations corresponding to an eigenfrequency can always be taken as TM or TE modes even when the walls have a finite conductivity and the medium is absorptive. This paper obtains analytic solutions to the field equations when the cylinder has a circular cross section. Some nonperturbative conclusions are drawn from the eigenvalue equation. Approximate analytic results for the resonant frequencies are obtained when the absorption of the medium is small and the walls are good conductors. Stability of the eigen modes is discussed. Similar results for the coaxial line are presented.展开更多
This study investigates a dual-cavity resonant composite sound-absorbing structure based on a micro-perforated plate.Using the COMSOL impedance tube model,the effects of various structural parameters on sound absorpti...This study investigates a dual-cavity resonant composite sound-absorbing structure based on a micro-perforated plate.Using the COMSOL impedance tube model,the effects of various structural parameters on sound absorption and sound insulation performances are analyzed.Results show that the aperture of the micro-perforated plate has the greatest influence on the sound absorption coefficient;the smaller the aperture,the greater is this coefficient.The thickness of the resonance plate has the most significant influence on the sound insulation and resonance frequency;the greater the thickness,the wider the frequency domain in which sound insulation is obtained.In addition,the effect of filling the structural cavity with porous foam ceramics has been studied,and it has been found that the porosity and thickness of the porous material have a significant effect on the sound absorption coefficient and sound insulation,while the pore size exhibits a limited influence.展开更多
The Fabry–Perot(FP) resonant cavity is widely used in laser and spectroscopic measurements due to its unique interference transfer function(ITF). In the ideal case of parallel incident light, the ITF of the FP resona...The Fabry–Perot(FP) resonant cavity is widely used in laser and spectroscopic measurements due to its unique interference transfer function(ITF). In the ideal case of parallel incident light, the ITF of the FP resonant cavity can be expressed by the Airy function. However, in reality, it is difficult to achieve perfect parallelism with collimated beams. In this article, a theoretical model is established for non-parallel light incidence, which assumes that the non-parallel incident light is a cone-shaped beam, and the cone angle is used to quantify the non-parallelism of the beam. The transmittance function of the FP resonant cavity under non-parallel light incidence is derived. The accuracy of the model is experimentally verified. Based on this model, the effects of divergence angle, tilt angle and FP cavity parameters(reflectivity, cavity length)on the ITF are studied. The reasons for the decrease in peak value, broadening and asymmetry of the interference peak under non-parallel light incidence are explained. It is suggested that a fine balance between the interference peak and the collimation effect of the incident light should be considered in the design and application of FP resonant cavities, especially for tilted applications such as angle-scanned spectroscopy. The research results of this article have certain significance for the design and application of FP resonant cavities.展开更多
An effective refractive index sensor built with square lattice photonic crystal is proposed,which can be applicable to photonic integrated circuits.Two photonic crystal waveguides rather than conventional ridge wavegu...An effective refractive index sensor built with square lattice photonic crystal is proposed,which can be applicable to photonic integrated circuits.Two photonic crystal waveguides rather than conventional ridge waveguides are used as entrance/exit waveguides to the micro-cavity.Three layers of photonic lattice are set between the photonic crystal waveguides and the micro-cavity to achieve both a high transmission and a high sensitivity.The plane wave method is utilized to calculate the disperse curves and the finite difference time domain scheme is employed to simulate the light propagation.At the resonant wavelength of about 1500 nm,the resonant wavelength shifts up by 0.7 nm for each increment of Δn=0.001.A transmission of more than 0.75 is observed.Although the position disorder of the photonic crystal doesn't affect the sensitivity of the sensor, the transmission reduces rapidly as the disorder increases.展开更多
A scheme is proposed for generating entangled W states with four cavity modes. In this scheme, we send a V-type three-level atom through two identical two-mode cavities in succession. After the atom exits from the sec...A scheme is proposed for generating entangled W states with four cavity modes. In this scheme, we send a V-type three-level atom through two identical two-mode cavities in succession. After the atom exits from the second cavity, the four cavity modes are prepared in the W state. On the other hand we can obtain three-atom W states by sending three V-type three-level atoms through a two-mode cavity in turn. The present scheme does not require conditional measurement, and it is easily generalized to preparing 2n-mode W states and n-atom W states.展开更多
A theoretical model is developed for calculating the eigenmodes of the multi-gap resonant cavity. The structure of concern is a kind of ladder-type circuit, offering the advantages of easy fabrication, high characteri...A theoretical model is developed for calculating the eigenmodes of the multi-gap resonant cavity. The structure of concern is a kind of ladder-type circuit, offering the advantages of easy fabrication, high characteristic impedance (R/Q), and thermal capacity in the millimeter wave to THz regime. The eigenfunction expansion method is used to establish the field expressions for the gaps and the coupling region. Then, the match conditions at the interface are employed, which leads to a group of complicate boundary equations in the form of an infinite series. To facilitate the mathematical treatments and perform a highly efficient calculation, these boundary equations are transformed into the algebraic forms through the matrix representations. Finally, the concise dispersion equation is obtained. The roots of the dispersion equation include both the axial modes in the gaps, which include the fundamental and the high-order modes, and the cavity modes in the coupling region. Extensive numerical results are presented and the behaviors of the multi-gap resonant cavity are examined.展开更多
This paper proposes a scheme for generating arbitrary superpositions of several coherent states along a straight line for a cavity mode. In the scheme, several atoms are sent through a cavity initially in a strong coh...This paper proposes a scheme for generating arbitrary superpositions of several coherent states along a straight line for a cavity mode. In the scheme, several atoms are sent through a cavity initially in a strong coherent state. The superposition of several coherent states with desired coefficients may be generated if each atom is detected in the excited state after it exits the cavity. The scheme is based on resonant atom-cavity interaction and no classical field is required during and after the atom cavity interaction. Thus, the scheme is very simple and the interaction time is very short, which is important in view of decoherence.展开更多
Presents the investigation of characteristics of mode separation in typical magnetron cavity for the great importance of precise prediction of mode separation used in the theoretical study and engineering design of ma...Presents the investigation of characteristics of mode separation in typical magnetron cavity for the great importance of precise prediction of mode separation used in the theoretical study and engineering design of magnetrons, and the comparative theoretical predication and simulation analysis made using field theory and computer simulation based on commercial EDA tools, Ansoft High Frequency Structure Simulator(HFSS)and POISSON SUPERFISH.展开更多
A resonant cavity-enhanced (RCE) quantum dot (QD) field-effect transistor (RCEQDFET) is designed for single- photon detection in this paper. Adding distributed Bragg reflection (DBR) mirrors to the single-phot...A resonant cavity-enhanced (RCE) quantum dot (QD) field-effect transistor (RCEQDFET) is designed for single- photon detection in this paper. Adding distributed Bragg reflection (DBR) mirrors to the single-photon detector (SPD), we improve the light absorption efficiency of the SPD. The effects of the reflectivity of the mirrors, the thickness and light absorption coefficient of the absorbing layer on the detector's light absorption efficiency are investigated, and the resonant cavity is determined by using the air/semiconductor interface as the mirror on the top. Through analyzing the relationship between the refractive index of AlxGal_xAs and A1 component, we choose A1As/Alo.15Gao.85As as the material of the mirror on the bottom. The pairs of A1As/Alo.15Gao.85As film are further determined to be 21 by calculating the reflectivity of the mirror. The detector is fabricated from semiconductor heterostructures grown by molecular beam epitaxy. The reflection spectrum, photoluminescence (PL) spectrum, photocurrent response, and channel current of the detector are tested and the results show that the RCEQDFET-SPD designed in this paper has better performances in photonic response and wavelength selection.展开更多
We propose a scheme to implement the n-qubit Deutsch-Jozsa algorithm based on resonant interaction between the atoms and a single-mode cavity. In the scheme, the resonant transitions between two ground states and one ...We propose a scheme to implement the n-qubit Deutsch-Jozsa algorithm based on resonant interaction between the atoms and a single-mode cavity. In the scheme, the resonant transitions between two ground states and one excited state of an atom are changed alternately by adjusting the cavity frequency appropriately, and the operations required to complete the algorithm can be significantly simplified following the increment of the number of qubits. The implementation of the scheme in experiment would show the full power of quantum algorithm and would be significative and important for more complicated quantum algorithm in cavity quantum electrodynamics.展开更多
Arrays of Ⅲ-nitride semiconductor micro-cone cavities with a base diameter of 3.3μm were fabricated by ion beam etching.The micro-cones consist of a 58nm thick multiple quantum wells of In_(0.22)Ga_(0.78)N/In_(0.06)...Arrays of Ⅲ-nitride semiconductor micro-cone cavities with a base diameter of 3.3μm were fabricated by ion beam etching.The micro-cones consist of a 58nm thick multiple quantum wells of In_(0.22)Ga_(0.78)N/In_(0.06)Ga_(0.94)N as well as a 1.5μm thick epilayer of GaN.Optical resonant modes from a single micro-cone could be clearly observed in the photoluminescence spectra at temperature up to 200 K under a pumping power density two orders of magnitude lower than that for the III-nitride semiconductor micro-disk or micro-ring cavity.Using a novel optical ray tracing method,we have figured out four main types of optical resonant cavities inside the three-dimensional micro-cone,including two Fabry-Perot(F-P)mode types as well as two Whispering Gallery mode types.The three corresponding mode spacings among the four agree perfectly with the experimental results.The advantages of this new class of micro-cavity over the other micro-cavities are discussed.These findings are expected to have impact on the design of the ultraviolet/blue micro-cavity laser diodes.展开更多
We report a new design of resonant cavity for a W-band electron paramagnetic resonance(EPR)spectrometer.An improved coupling-adjusting mechanism,which is robust,compact,and suits with both solenoid-type and split-pair...We report a new design of resonant cavity for a W-band electron paramagnetic resonance(EPR)spectrometer.An improved coupling-adjusting mechanism,which is robust,compact,and suits with both solenoid-type and split-pair magnets,is utilized on the cavity,and thus enables both continuous-wave(CW)and pulsed EPR experiments.It is achieved by a tiny metal cylinder in the iris.The coupling coefficient can be varied from 0.2 to 17.9.Furthermore,two pistons at each end of the cavity allow for adjustment of the resonant frequency.A horizontal TE_(011) geometry also makes the cavity compatible with the two frequently used types of magnets.The coupling-varying ability has been demonstrated by reflection coefficient(S_(11))measurement.CW and pulsed EPR experiments have been conducted.The performance data indicates a prospect of wide applications of the cavity in fields of physics,chemistry and biology.展开更多
The effect of resonant cavity structure on the performance operation of In As/Ga As quantum ring intersubband photodetector is studied for detection of terahertz radiations range.In order to confinement of optical fie...The effect of resonant cavity structure on the performance operation of In As/Ga As quantum ring intersubband photodetector is studied for detection of terahertz radiations range.In order to confinement of optical field w ithin active region and consequently enhancement in responsivity of device,tw o periods of Al2O3/Ga As distributed bragg reflectors are used as bottom dielectric mirror and a thin layer of Au material as top mirror of device.For further improvement in detectivity,Al0.3Ga0.7As/In0.3Ga0.7As resonant tunneling barriers are included in absorption layers to reduce dark current of device.Proposed photodetector show s a peak responsivity of about 0.4(A/W)and quantum efficiency of 1.2%at the w avelength of 80μm(3.75 THz).Furthermore,specific detectivity(D*)of device is calculated and results are compared to conventional quantum ring inter-subband photodetector.Results predict a D*of^1011(cm.Hz1/2/W)for device at T=80 K and V=0.4 V w hich is tw o orders of magnitude higher than that of conventional QRIPs.展开更多
Emission characteristics of top emitting organic light-emitting devices (TOLEDs) with Ag as reflective anode, Al/Ag as semitransparent cathode and 90 160 nm [N-(1-naphthyl)-N-phenyl-amino] biphenyl/tris-(8-hydrox...Emission characteristics of top emitting organic light-emitting devices (TOLEDs) with Ag as reflective anode, Al/Ag as semitransparent cathode and 90 160 nm [N-(1-naphthyl)-N-phenyl-amino] biphenyl/tris-(8-hydroxy quinoline) aluminum (NPB/Alq3) sandwiched in the electrodes are examined. The electroluminescence (EL) spectra of the TOLEDs are simulated based on the Fabry-Perot cavity theory. And the resonant modes in cavity structure of TOLEDs is discussed and clarified which can accurately describe the work principle of the devices. A fairly good match between calculated values and experimental data is achieved at different emission colors from bluish green to orange.展开更多
基金support from the National Key Research and Development Program of China (2020YFA0714504,2019YFA0709100).
文摘High-resolution multi-color printing relies upon pixelated optical nanostructures,which is crucial to promote color display by producing nonbleaching colors,yet requires simplicity in fabrication and dynamic switching.Antimony trisulfide(Sb_(2)S_(3))is a newly rising chalcogenide material that possesses prompt and significant transition of its optical characteristics in the visible region between amorphous and crystalline phases,which holds the key to color-varying devices.Herein,we proposed a dynamically switchable color printing method using Sb_(2)S_(3)-based stepwise pixelated Fabry-Pérot(FP)cavities with various cavity lengths.The device was fabricated by employing a direct laser patterning that is a less timeconsuming,more approachable,and low-cost technique.As switching the state of Sb_(2)S_(3) between amorphous and crystalline,the multi-color of stepwise pixelated FP cavities can be actively changed.The color variation is due to the profound change in the refractive index of Sb_(2)S_(3) over the visible spectrum during its phase transition.Moreover,we directly fabricated sub-50 nm nano-grating on ultrathin Sb_(2)S_(3) laminate via microsphere 800-nm femtosecond laser irradiation in far field.The minimum feature size can be further decreased down to~45 nm(λ/17)by varying the thickness of Sb_(2)S_(3) film.Ultrafast switchable Sb_(2)S_(3) photonic devices can take one step toward the next generation of inkless erasable papers or displays and enable information encryption,camouflaging surfaces,anticounterfeiting,etc.Importantly,our work explores the prospects of rapid and rewritable fabrication of periodic structures with nano-scale resolution and can serve as a guideline for further development of chalcogenide-based photonics components.
基金Project supported by the National Natural Science Foundation of China (Grant No 10225421).
文摘An alternative scheme is presented for teleportation of a two-atom entangled state in cavity quantum electrodynamics (QED). It is based on the resonant atom-cavity field interaction. In the scheme, only one cavity is involved, and the number of the atoms needed to be detected is decreased compared with the previous scheme. Since the resonant atom-cavity field interaction greatly reduces the interaction time, the decoherence effect can be effectively suppressed during the teleportation process. The experimental feasibility of the scheme is discussed. The scheme can easily be generalized to the teleportation of N-atom Greeninger-Horne-Zeilinger (GHZ) entangled states. The number of atoms needed to be detected does not increase as the number of the atoms in the GHZ state increases.
基金supported by the National Key Research and Development Program of China(No.2016YFA0401902)
文摘We demonstrated a novel method to measure the unloaded quality factor(Q factor) of high-Q resonant cavities. This method was used to obtain data with low errors and calculate the unloaded Q factor. This procedure was more reliable than traditional methods. The data required for the method were near the resonant frequency,not at the half-power points of the reflection coefficient curve or Smith chart. We applied the new method to measure a resonant cavity with an unloaded Q factor of^100,000, obtaining good agreement between the measured and theoretical results.
基金Project supported by the National Natural Science Foundation of China(Grant No.62105169)Natural Science Foundation of Ningbo(Grant No.2021J078)Special fund for Talents Project of Ningbo University(Grant No.432094940)。
文摘Light absorption and radiation are fundamental processes in optical science and engineering.Materials with perfect absorption properties play an important role in numerous optical applications.Following the meteoric rise of MoS_(2)material,global opportunities and challenges coexist due to its extremely weak light-matter interaction capability beyond its energy band.In this work,we designed a kind of sandwich resonance structure and investigated MoS_(2)as a perfect absorber in the infrared spectrum that should be transparent according to the optical band theory.The infrared absorption properties of W or Au/MoS_(2)/Au models at 800 nm-2400 nm were systematic simulated.By optimizing the structural parameters,the resonant wavelength of perfect absorption can be modulated from 830 nm to 1700 nm with angle insensitivity and polar independence.Moreover,we discovered that the bandwidth of absorption exceeding 50%of the W-top model reaches500 nm,while that of the Au-top model is less than 100 nm,indicating that the top metal material has a great influence on the resonance absorption spectrum.Our work provides a practical route for enhancing and manipulating the light-matter interactions of low-dimensional materials beyond their own band gaps,which will be critical in the future design and implementation of optoelectronic devices and systems.
基金Project supported by the National Natural Science Foundation of China (Grant No. 10675174)
文摘Cylindrical waveguides without end surfaces can serve as two-dimensional resonant cavities. In such cavities the electromagnetic oscillations corresponding to an eigenfrequency can always be taken as TM or TE modes even when the walls have a finite conductivity and the medium is absorptive. This paper obtains analytic solutions to the field equations when the cylinder has a circular cross section. Some nonperturbative conclusions are drawn from the eigenvalue equation. Approximate analytic results for the resonant frequencies are obtained when the absorption of the medium is small and the walls are good conductors. Stability of the eigen modes is discussed. Similar results for the coaxial line are presented.
基金This study was supported by State Grid Corporation Science and Technology Project“Research on Comprehensive Control Technology of Low Frequency Noise of Distribution Transformers in Residential Areas”(5216A019000P).
文摘This study investigates a dual-cavity resonant composite sound-absorbing structure based on a micro-perforated plate.Using the COMSOL impedance tube model,the effects of various structural parameters on sound absorption and sound insulation performances are analyzed.Results show that the aperture of the micro-perforated plate has the greatest influence on the sound absorption coefficient;the smaller the aperture,the greater is this coefficient.The thickness of the resonance plate has the most significant influence on the sound insulation and resonance frequency;the greater the thickness,the wider the frequency domain in which sound insulation is obtained.In addition,the effect of filling the structural cavity with porous foam ceramics has been studied,and it has been found that the porosity and thickness of the porous material have a significant effect on the sound absorption coefficient and sound insulation,while the pore size exhibits a limited influence.
基金Project supported by the National Natural Science Foundation of China (Grant No.U19A2044)the National Natural Science Foundation of China (Grant No.41975037)the Key Technologies Research and Development Program of Anhui Province (Grant No.202004i07020013)。
文摘The Fabry–Perot(FP) resonant cavity is widely used in laser and spectroscopic measurements due to its unique interference transfer function(ITF). In the ideal case of parallel incident light, the ITF of the FP resonant cavity can be expressed by the Airy function. However, in reality, it is difficult to achieve perfect parallelism with collimated beams. In this article, a theoretical model is established for non-parallel light incidence, which assumes that the non-parallel incident light is a cone-shaped beam, and the cone angle is used to quantify the non-parallelism of the beam. The transmittance function of the FP resonant cavity under non-parallel light incidence is derived. The accuracy of the model is experimentally verified. Based on this model, the effects of divergence angle, tilt angle and FP cavity parameters(reflectivity, cavity length)on the ITF are studied. The reasons for the decrease in peak value, broadening and asymmetry of the interference peak under non-parallel light incidence are explained. It is suggested that a fine balance between the interference peak and the collimation effect of the incident light should be considered in the design and application of FP resonant cavities, especially for tilted applications such as angle-scanned spectroscopy. The research results of this article have certain significance for the design and application of FP resonant cavities.
基金supported by the National Natural Science Foundation of China under Grant No.0475048.
文摘An effective refractive index sensor built with square lattice photonic crystal is proposed,which can be applicable to photonic integrated circuits.Two photonic crystal waveguides rather than conventional ridge waveguides are used as entrance/exit waveguides to the micro-cavity.Three layers of photonic lattice are set between the photonic crystal waveguides and the micro-cavity to achieve both a high transmission and a high sensitivity.The plane wave method is utilized to calculate the disperse curves and the finite difference time domain scheme is employed to simulate the light propagation.At the resonant wavelength of about 1500 nm,the resonant wavelength shifts up by 0.7 nm for each increment of Δn=0.001.A transmission of more than 0.75 is observed.Although the position disorder of the photonic crystal doesn't affect the sensitivity of the sensor, the transmission reduces rapidly as the disorder increases.
文摘A scheme is proposed for generating entangled W states with four cavity modes. In this scheme, we send a V-type three-level atom through two identical two-mode cavities in succession. After the atom exits from the second cavity, the four cavity modes are prepared in the W state. On the other hand we can obtain three-atom W states by sending three V-type three-level atoms through a two-mode cavity in turn. The present scheme does not require conditional measurement, and it is easily generalized to preparing 2n-mode W states and n-atom W states.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61222110 and 60971073)
文摘A theoretical model is developed for calculating the eigenmodes of the multi-gap resonant cavity. The structure of concern is a kind of ladder-type circuit, offering the advantages of easy fabrication, high characteristic impedance (R/Q), and thermal capacity in the millimeter wave to THz regime. The eigenfunction expansion method is used to establish the field expressions for the gaps and the coupling region. Then, the match conditions at the interface are employed, which leads to a group of complicate boundary equations in the form of an infinite series. To facilitate the mathematical treatments and perform a highly efficient calculation, these boundary equations are transformed into the algebraic forms through the matrix representations. Finally, the concise dispersion equation is obtained. The roots of the dispersion equation include both the axial modes in the gaps, which include the fundamental and the high-order modes, and the cavity modes in the coupling region. Extensive numerical results are presented and the behaviors of the multi-gap resonant cavity are examined.
基金Project supported by the National Natural Science Foundation of China (Grant No. 10674025)the Doctoral Foundation of the Ministry of Education of China (Grant No. 20070386002)
文摘This paper proposes a scheme for generating arbitrary superpositions of several coherent states along a straight line for a cavity mode. In the scheme, several atoms are sent through a cavity initially in a strong coherent state. The superposition of several coherent states with desired coefficients may be generated if each atom is detected in the excited state after it exits the cavity. The scheme is based on resonant atom-cavity interaction and no classical field is required during and after the atom cavity interaction. Thus, the scheme is very simple and the interaction time is very short, which is important in view of decoherence.
文摘Presents the investigation of characteristics of mode separation in typical magnetron cavity for the great importance of precise prediction of mode separation used in the theoretical study and engineering design of magnetrons, and the comparative theoretical predication and simulation analysis made using field theory and computer simulation based on commercial EDA tools, Ansoft High Frequency Structure Simulator(HFSS)and POISSON SUPERFISH.
基金Project supported by the National Natural Science Foundation of China(Grant No.61274125)the Natural Science Foundation of Beijing,China(Grant No.11DB1262)
文摘A resonant cavity-enhanced (RCE) quantum dot (QD) field-effect transistor (RCEQDFET) is designed for single- photon detection in this paper. Adding distributed Bragg reflection (DBR) mirrors to the single-photon detector (SPD), we improve the light absorption efficiency of the SPD. The effects of the reflectivity of the mirrors, the thickness and light absorption coefficient of the absorbing layer on the detector's light absorption efficiency are investigated, and the resonant cavity is determined by using the air/semiconductor interface as the mirror on the top. Through analyzing the relationship between the refractive index of AlxGal_xAs and A1 component, we choose A1As/Alo.15Gao.85As as the material of the mirror on the bottom. The pairs of A1As/Alo.15Gao.85As film are further determined to be 21 by calculating the reflectivity of the mirror. The detector is fabricated from semiconductor heterostructures grown by molecular beam epitaxy. The reflection spectrum, photoluminescence (PL) spectrum, photocurrent response, and channel current of the detector are tested and the results show that the RCEQDFET-SPD designed in this paper has better performances in photonic response and wavelength selection.
基金Project supported by the National Natural Science Foundation of China (Grant No 60667001)
文摘We propose a scheme to implement the n-qubit Deutsch-Jozsa algorithm based on resonant interaction between the atoms and a single-mode cavity. In the scheme, the resonant transitions between two ground states and one excited state of an atom are changed alternately by adjusting the cavity frequency appropriately, and the operations required to complete the algorithm can be significantly simplified following the increment of the number of qubits. The implementation of the scheme in experiment would show the full power of quantum algorithm and would be significative and important for more complicated quantum algorithm in cavity quantum electrodynamics.
基金Supported by the Foundation for University Key Teacher by the Ministry of Education,the National Natural Science Foundation of China under Grant Nos.19774008,60077022 and 69896260the Natural Science Foundation of USA under Grant No.INT-9729582.
文摘Arrays of Ⅲ-nitride semiconductor micro-cone cavities with a base diameter of 3.3μm were fabricated by ion beam etching.The micro-cones consist of a 58nm thick multiple quantum wells of In_(0.22)Ga_(0.78)N/In_(0.06)Ga_(0.94)N as well as a 1.5μm thick epilayer of GaN.Optical resonant modes from a single micro-cone could be clearly observed in the photoluminescence spectra at temperature up to 200 K under a pumping power density two orders of magnitude lower than that for the III-nitride semiconductor micro-disk or micro-ring cavity.Using a novel optical ray tracing method,we have figured out four main types of optical resonant cavities inside the three-dimensional micro-cone,including two Fabry-Perot(F-P)mode types as well as two Whispering Gallery mode types.The three corresponding mode spacings among the four agree perfectly with the experimental results.The advantages of this new class of micro-cavity over the other micro-cavities are discussed.These findings are expected to have impact on the design of the ultraviolet/blue micro-cavity laser diodes.
基金Project supported by the Chinese Academy of Sciences(Grant Nos.XDC07000000 and GJJSTD20200001)the Youth Innovation Promotion Association of Chinese Academy of Sciences for the support。
文摘We report a new design of resonant cavity for a W-band electron paramagnetic resonance(EPR)spectrometer.An improved coupling-adjusting mechanism,which is robust,compact,and suits with both solenoid-type and split-pair magnets,is utilized on the cavity,and thus enables both continuous-wave(CW)and pulsed EPR experiments.It is achieved by a tiny metal cylinder in the iris.The coupling coefficient can be varied from 0.2 to 17.9.Furthermore,two pistons at each end of the cavity allow for adjustment of the resonant frequency.A horizontal TE_(011) geometry also makes the cavity compatible with the two frequently used types of magnets.The coupling-varying ability has been demonstrated by reflection coefficient(S_(11))measurement.CW and pulsed EPR experiments have been conducted.The performance data indicates a prospect of wide applications of the cavity in fields of physics,chemistry and biology.
基金The project supported by National Natural Science Foundation of China under Grant No.10774042National Fundamental Basic Research Program of China under Grant No.2005CB724502+2 种基金Natural Science Foundation of Hunan Province under Grant No.05JJ30005the Scientific Research Fund of Educational Department of Hunan Province under Grant No.05C756the Scientific Research Fund of Hunan Institute of Humanity and Science and Technology under Grant No.2005A008
文摘The effect of resonant cavity structure on the performance operation of In As/Ga As quantum ring intersubband photodetector is studied for detection of terahertz radiations range.In order to confinement of optical field w ithin active region and consequently enhancement in responsivity of device,tw o periods of Al2O3/Ga As distributed bragg reflectors are used as bottom dielectric mirror and a thin layer of Au material as top mirror of device.For further improvement in detectivity,Al0.3Ga0.7As/In0.3Ga0.7As resonant tunneling barriers are included in absorption layers to reduce dark current of device.Proposed photodetector show s a peak responsivity of about 0.4(A/W)and quantum efficiency of 1.2%at the w avelength of 80μm(3.75 THz).Furthermore,specific detectivity(D*)of device is calculated and results are compared to conventional quantum ring inter-subband photodetector.Results predict a D*of^1011(cm.Hz1/2/W)for device at T=80 K and V=0.4 V w hich is tw o orders of magnitude higher than that of conventional QRIPs.
基金Project supported by the Science and Technology Commission of Shanghai Municipality(Grant No.09ZR1411900)the National High-Technology Research and Development Program of China(Grant No.2010AA03A337)
文摘Emission characteristics of top emitting organic light-emitting devices (TOLEDs) with Ag as reflective anode, Al/Ag as semitransparent cathode and 90 160 nm [N-(1-naphthyl)-N-phenyl-amino] biphenyl/tris-(8-hydroxy quinoline) aluminum (NPB/Alq3) sandwiched in the electrodes are examined. The electroluminescence (EL) spectra of the TOLEDs are simulated based on the Fabry-Perot cavity theory. And the resonant modes in cavity structure of TOLEDs is discussed and clarified which can accurately describe the work principle of the devices. A fairly good match between calculated values and experimental data is achieved at different emission colors from bluish green to orange.