期刊文献+
共找到1,524篇文章
< 1 2 77 >
每页显示 20 50 100
Survey of <i>C. difficile</i>-Specific Infection Control Policies in Local Long-Term Care Facilities 被引量:2
1
作者 Laurie Archbald-Pannone 《International Journal of Clinical Medicine》 2014年第7期414-419,共6页
Introduction: The incidence and severity of Clostridium difficile infection (CDI) has been increasing and long-term care facility (LTCF) residents are at high risk given their age, co-morbidities, and high antibiotic ... Introduction: The incidence and severity of Clostridium difficile infection (CDI) has been increasing and long-term care facility (LTCF) residents are at high risk given their age, co-morbidities, and high antibiotic exposure. Infection control policies are crucial for controlling CDI, but there are currently no regulatory guidelines in the United States. Therefore, we evaluated infection control policies in local LTCFs to define the CDI-specific policies and the administrative and staff understanding of CDI, so as to identify perceived barriers for compliance. Methods: IRB approval was sought and exemption granted, all 8 local LTCFs were asked to participate. Each facility was visited by study personnel who interviewed the administrative Infection Control Practitioner (ICP) and 3-4 Licensed Practical Nurses (LPNs) with distinct survey format. Infection control policies were then compared to the SHEA recommendations for CDI in LTCFs. Results: Of the eligible facilities, 75% (n = 6) participated. ICP (n = 6) and LPNs (n = 21) were interviewed. All facilities accept residents with active CDI and 2 had written CDI-specific infection control policies. All facilities had hand hygiene or glove use policies and 2 had policies for the use of sporicidal environmental cleaning. No facility restricted antibiotic use. Each facility has a policy to instruct their staff through in-services, either annually or upon new hire, but 33% (n = 7) LPNs reported no facility-based CDI training. While 80% (n = 17) of LPNs felt comfortable with the facility CDI policies, only 11 accurately restated it. ICPs felt the most relevant barrier to staff compliance was time constraints (n = 4, 67%), however, LPNs felt it was limited knowledge (n = 10, 48%) and poor communication (n = 2, 10%). Discussion and Conclusions: With the increasing incidence and severity of CDI in LCTF, few of the facilities surveyed had CDI-specific policies. Despite CDI-specific training, there is a perceived knowledge and communication gap for staff caring for residents with CDI. 展开更多
关键词 CLOSTRIDIUM DIFFICILE INFECTION INFECTION control POLICIES Long-Term Care facilities
下载PDF
The Current Status and Challenges Regarding Tuberculosis Infection Control in Health Care Facilities in China 被引量:3
2
作者 ZHAO Fei CHENG Jun +9 位作者 CHENG Shi Ming ZHANG Hui ZHAO Yan Lin ZHANG Can You HU Dong Mei FAN Hai Ying HUANG Fei QU Yan HE Guang Xue WANG Li Xia 《Biomedical and Environmental Sciences》 SCIE CAS CSCD 2015年第11期848-854,共7页
Health care facilities are a high-risk environment for generating and spreading respiratory infectious diseases such as tuberculosis (TB). The TB prevention and treatment staff in health care facilities are responsi... Health care facilities are a high-risk environment for generating and spreading respiratory infectious diseases such as tuberculosis (TB). The TB prevention and treatment staff in health care facilities are responsible for the identification, diagnosis, treatment, supervision, and management of TB patients . 展开更多
关键词 TB The Current Status and Challenges Regarding Tuberculosis Infection control in Health Care facilities in China
下载PDF
Comprehensive Prevention and Control Strategies for Soil Continuous Cropping Obstacles of Facility Chili Pepper in Guangxi
3
作者 Jie QIN Qihan LUO +1 位作者 Shuifang ZHU Dexian HUANG 《Meteorological and Environmental Research》 2024年第5期70-72,共3页
As a crucial economic crop in Guangxi region,chili pepper is facing increasingly severe challenges of continuous cropping obstacles.In this paper,the causes of continuous cropping obstacles in chili pepper soil are de... As a crucial economic crop in Guangxi region,chili pepper is facing increasingly severe challenges of continuous cropping obstacles.In this paper,the causes of continuous cropping obstacles in chili pepper soil are deeply analyzed,covering multiple dimensions such as the dynamic changes in soil physicochemical properties,the imbalance of soil microbial community structure,and the gradual accumulation of soil borne diseases and pests.Subsequently,a set of comprehensive prevention and control strategy is proposed:soil improvement through the application of organic fertilizers,biological fertilizers,and soil conditioners;implementing agricultural strategies of crop rotation and intercropping,flexibly adjusting planting density and methods,to optimize crop layout and improve planting management measures;actively introducing natural enemies for biological control,while promoting the use of biopesticides and microbial preparations for biological control.In response to the actual situation of continuous cropping obstacles in chili pepper soil of Guangxi,it is suggested that innovative soil improvement technologies,improved planting management measures,and promotion of biological control methods should also be considered. 展开更多
关键词 facility agriculture Soil control Comprehensive prevention and control facility vegetables
下载PDF
基于FCS-MPC的PMSM自抗扰弱磁控制系统设计与分析
4
作者 余雨婷 黄杰 +1 位作者 褚衍廷 周方圆 《机车电传动》 2024年第4期155-162,共8页
永磁同步电机(Permanent Magnet Synchronous Motor,PMSM)弱磁控制系统常用于电动汽车领域。电动汽车运行于低速时,PMSM需要输出大转矩,以响应快速起步、加速及爬坡需求;电动汽车运行于高速,且超过额定速度时,PMSM处于弱磁状态,需具备... 永磁同步电机(Permanent Magnet Synchronous Motor,PMSM)弱磁控制系统常用于电动汽车领域。电动汽车运行于低速时,PMSM需要输出大转矩,以响应快速起步、加速及爬坡需求;电动汽车运行于高速,且超过额定速度时,PMSM处于弱磁状态,需具备一定的带载能力,以满足高速行驶和超车工况。针对PMSM弱磁控制中的转速突变,文章设计了自抗扰控制器(Active Disturbances Rejection Controller,ADRC)替代速度外环PI控制器,对扰动项快速观测和补偿,减小速度突变对系统造成干扰,实现转速精准跟踪。针对转矩项干扰,结合转矩和磁链输出值设计有限集模型预测控制(Finite Control Set Model Predictive Control,FCS-MPC)以替代传统直接转矩控制(Direct Torque Control,DTC),构建令转矩和磁链脉动最小的价值函数,再通过价值函数的计算寻优,选取出最优空间矢量控制信号输送给逆变器。基于ADRC和FCS-MPC的优化作用,弱磁控制系统的抗扰能力、电流和转矩输出精度增强,试验验证了所设计系统的可行性和性能优势。 展开更多
关键词 永磁同步电机 自抗扰 模型预测控制 弱磁控制 速度转矩突变 稳定性
下载PDF
The Main Biological Hazards in Animal Biosafety Level 2 Facilities and Strategies for Control 被引量:4
5
作者 LI Xiao Yan XUE Kang Ning +1 位作者 JIANG Jin Sheng LU Xuan Cheng 《Biomedical and Environmental Sciences》 SCIE CAS CSCD 2016年第4期300-304,共5页
Concern about the biological hazards involved in microbiological research, especially research involving laboratory animals, has increased in recent years. Working in an animal biosafety level 2 facility (ABSL-2), c... Concern about the biological hazards involved in microbiological research, especially research involving laboratory animals, has increased in recent years. Working in an animal biosafety level 2 facility (ABSL-2), commonly used for research on infectious diseases, poses various biological hazards. Here, the regulations and standards related to laboratory biosafety in China are introduced, the potential biological hazards present in ABSL-2 facilities are analyzed, and a series of strategies to control the hazards are presented. 展开更多
关键词 The Main Biological Hazards in Animal Biosafety Level 2 facilities and Strategies for control
下载PDF
Road vehicle-induced vibration control of microelectronics facilities
6
作者 郭安薪 徐幼麟 李惠 《Earthquake Engineering and Engineering Vibration》 SCIE EI CSCD 2005年第1期139-151,共13页
A hybrid control platform is investigated in this paper to mitigate microvibrations to a group of vibration-sensitive equipment installed in a microelectronics facility subject to nearby road vehicle-induced horizonta... A hybrid control platform is investigated in this paper to mitigate microvibrations to a group of vibration-sensitive equipment installed in a microelectronics facility subject to nearby road vehicle-induced horizontal and vertical ground motions. The hybrid control platform, on which microelectronics equipment is installed, is mounted on a building floor through a series of passive mounts and controlled by hydraulic actuators in both horizontal and vertical directions. The control platform is an elastic body with significant bending modes of vibration, and a sub-optimal control algorithm is used to manipulate the hydraulic actuators with actuator dynamics included. The finite element model and the equations of motion of the coupled platform-building system are then established in the absolute coordinate to facilitate the feedback control and performance evaluation of the platform. The horizontal and vertical ground vibrations at the base of the building induced by nearby moving road vehicles are assumed to be stationary random processes. A typical three-story microelectronics building is selected as a case study. The case study shows that the vertical vibration of the microelectronics building is higher than the horizontal. The use of a hybrid control platform can effectively reduce both horizontal and vertical microvibrations of the microelectronics equipment to the level which satisfies the stringent microscale velocity requirement specified in the Bolt Beranek & Newman (BBN) criteria. 展开更多
关键词 microelectronics facility microvibration hybrid control platform road vehicles horizontal ground motion vertical ground motion
下载PDF
Evaluation of Infection Prevention and Control Programmes (IPC), and Assessment Tools for IPC-Programmes at MOH-Health Facilities in Saudi Arabia
7
作者 Abdullah M. Assiri Abdul Jamil Choudhry +2 位作者 Suhair S. Alsaleh Khalid H. Alanazi Suha S. Alsaleh 《Open Journal of Nursing》 2014年第7期483-492,共10页
Infection Prevention and Control is a Quality Standard and is crucial in all health care facilities. Many hospitals remain deficient in trained infection control professionals (ICPs), and now there is an acute awarene... Infection Prevention and Control is a Quality Standard and is crucial in all health care facilities. Many hospitals remain deficient in trained infection control professionals (ICPs), and now there is an acute awareness of the need to correct this shortfall. The objectives of the study were to describe the current status of ICP programs at ministry of health (MOH) and to evaluate the current status of infection prevention and control programs at health care facilities in kingdom of Saudi Arabia. A cross sectional interview and a self assessment study were conducted on infection prevention and control (IPC) program in Saudi Arabia. All the MOH hospital in all regions was randomly chosen to the study setting. The selection of facilities was done at random with a clear intention to include twenty regions. A random sample was taken from these hospitals with sample size 56 (55.4%), by Multi stage random sampling technique. Results showed that the total facility in all over the kingdom was 51.4% where central area covered the facility score 58.2%, followed by western area (54.8%), south (53.7%), east (46.3%), and lastly with (45.8%) north area. Survey revealed that the infrastructure for infection control program in Saudi Arabian hospitals remained underdeveloped. There were defects in the identified components of effective infection control programs. 展开更多
关键词 INFECTION Prevention control Assessment Tools Health facilITY SAUDI ARABIA
下载PDF
Health Facilities Readiness to Implement Standard Precautions for Infection Prevention and Control in Tanzania: Lesson Learnt from SARA Reports
8
作者 Joseph Christopher Hokororo Omary A. Nassoro +11 位作者 Saumu Iddy Nungu Radenta Paul Bahegwa Ruth Raymond Ngowi Yohanes Silipamwambo Msigwa Laura Edward Marandu Mwendwa Mwenesi Chrisogone Justin German Akili Mawazo Michael M. Habtu Grace E. Saguti Tigest K. Mengestu Eliudi Saria Eliakimu 《Advances in Infectious Diseases》 CAS 2022年第3期392-404,共13页
Introduction: Standard Precautions are a set of measures applied in the care of all individuals/patients regardless of their infectious status aiming at preventing healthcare workers and patients from infections, prev... Introduction: Standard Precautions are a set of measures applied in the care of all individuals/patients regardless of their infectious status aiming at preventing healthcare workers and patients from infections, preventing environmental contamination and spread of infections to the community. Many health facilities have not implemented them to an acceptable level. The purpose of the study is to report progress of improvement in health facilities readiness to implement standard precautions for infection prevention and control based on SARA reports. Methods: We generated mean scores of all standard precautions each year and calculated their standard deviations, variances and confidence intervals. One-way ANOVA was used to determine if the mean scores were equal. Finally, the trend of improvement in health facilities readiness to implement the standard precautions was generated. Results: A total of nine standard precautions were reported in SARA reports for 2012, 2017 and 2020. The mean scores of the standard precautions were 52.22% in 2012, 64.55% in 2017 and 69.66% in 2020. The overall trend showed an increase in health facilities readiness to implement standard precautions, although the mean scores were not statistically different (p-value 0.3217). Conclusion: SARA surveys conducted in Tanzania in 2012, 2017 and 2020 have shown an overall increase in health facilities readiness to implement standard precautions. Safe final waste disposal was being done in fewest facilities while single-use or auto-disable syringes were in most facilities that were sampled in all years. SARA surveys may be a useful way to evaluate Infection Prevention and Control adherence in health facilities. 展开更多
关键词 Infection Prevention and control Standard Precautions Health facilities Readiness Safe Waste Disposal Implementation of Standard Precautions
下载PDF
Research and Development of Condensate Water Fined Processing Control System Based on FCS
9
作者 Cheng Bei 《Journal of Energy and Power Engineering》 2015年第7期673-678,共6页
This paper briefly states the features and advantages of FCS (fieldbus control system). In view of condensate water fined processing system of domestic 600 MW supercritical coal-fired generating units, it designed a... This paper briefly states the features and advantages of FCS (fieldbus control system). In view of condensate water fined processing system of domestic 600 MW supercritical coal-fired generating units, it designed and developed a FCS for entirely process control, designed computer monitoring software and organized network monitor the change of data. At the same time, making the simulation device of the system, the FCS control system scheme is implemented on this device. It is verified by practice that the system control technology is advanced, safe, reliable and operation well. It provides a complete project for automation technology upgrade program in power plant. In addition, this device can be used in the power industry technical personnel training and teaching of colleges and universities. It is worth promotion and reference. 展开更多
关键词 fcs sequential function chart programmable control monitoring.
下载PDF
一种基于FCS的花卉温室控制系统方案 被引量:7
10
作者 杨乐 彭军 张应龙 《农机化研究》 北大核心 2009年第6期171-173,共3页
从温室花卉生长原理和温室控制原理出发,提出了一种基于FCS的花卉温室控制系统的设计方案,并与其它方案进行对照。实验证明,该系统方案具有稳定性好、可靠性高、通用性好和环境适用性强等优点,满足设计要求,便于推广应用。
关键词 温室 花卉 fcs 控制系统
下载PDF
神经元解耦控制方案在火电厂球磨机FCS中的设计 被引量:3
11
作者 梁庚 白焰 李文 《计算机测量与控制》 CSCD 2004年第1期50-53,共4页
给出了一种由神经元和静态解耦网络相结合的针对火电厂球磨机现场总线控制的方案。并在此基础上将此控制方案应用于火电厂球磨机的现场总线控制系统的设计和开发,论证了该种控制方案在FCS控制系统中的可行性,并详细阐述了该控制方案在FC... 给出了一种由神经元和静态解耦网络相结合的针对火电厂球磨机现场总线控制的方案。并在此基础上将此控制方案应用于火电厂球磨机的现场总线控制系统的设计和开发,论证了该种控制方案在FCS控制系统中的可行性,并详细阐述了该控制方案在FCS上位监控级和现场级的实现方法和过程。从实时仿真和现场运行的结果看,该种控制方案在FCS中实现可以取得令人满意的控制效果。 展开更多
关键词 火电厂 锅炉 中储式制粉系统 球磨机 fcs 现场总线 设计 神经元 解耦控制
下载PDF
基于CAN的FCS型智能温室系统的设计与实现 被引量:5
12
作者 郭佳 任博 张侃谕 《自动化与仪表》 北大核心 2010年第9期32-35,44,共5页
设计实现了一个以CAN总线通信架构为基础的智能温室控制系统。系统应用模糊解耦技术消除了温室温湿度控制回路的耦合,嵌入一个精简专家控制器补偿修正其它环境因子间的耦合作用,针对复杂工况设计了灵活多样的专家控制策略。控制系统在... 设计实现了一个以CAN总线通信架构为基础的智能温室控制系统。系统应用模糊解耦技术消除了温室温湿度控制回路的耦合,嵌入一个精简专家控制器补偿修正其它环境因子间的耦合作用,针对复杂工况设计了灵活多样的专家控制策略。控制系统在温室现场的加热、通风实际效果图表明:该控制系统通信可靠,控制精度高,稳定性好,较好地满足了温室生产控制的要求。 展开更多
关键词 模糊解耦 专家控制 CAN现场总线 温室 现场总线控制系统
下载PDF
应用滑模控制的四开关逆变器PMSM系统FCS-MPC策略 被引量:13
13
作者 李国飞 滕青芳 +1 位作者 王传鲁 张雅琴 《浙江大学学报(工学版)》 EI CAS CSCD 北大核心 2017年第3期620-627,共8页
为了提高三相四开关逆变器永磁同步电机(PMSM)控制系统的性能,采用滑模控制方法,提出一种有限控制集模型预测控制(FCS-MPC)策略,并设计可以无抖振、单调收敛的滑模转速调节器.所设计的控制系统能够保证PMSM系统可靠稳定地运行,可抑制PMS... 为了提高三相四开关逆变器永磁同步电机(PMSM)控制系统的性能,采用滑模控制方法,提出一种有限控制集模型预测控制(FCS-MPC)策略,并设计可以无抖振、单调收敛的滑模转速调节器.所设计的控制系统能够保证PMSM系统可靠稳定地运行,可抑制PMSM的电磁转矩脉动,改善三相定子电流波形效果,具备良好的转速跟随性能.仿真结果表明,与常规FCS-MPC方法相比,滑模转速调节器可以使电机加载时的转速跌落更小,并且转速能够更快恢复至参考值.所提出的FCS-MPC策略可以明显减小PMSM转矩脉动,降低三相定子电流总谐波失真(THD)值.当系统参数发生变化时,PMSM系统仍可平稳运行,三相定子电流能够保持良好的平衡性. 展开更多
关键词 滑模控制 有限控制集模型预测控制(fcs-MPC) 三相四开关逆变器 永磁同步电机 转矩脉动抑制
下载PDF
FCS165现场总线控制系统实际微分PID控制器的设计 被引量:4
14
作者 叶智 李晓博 +3 位作者 康毅 马乐 杨新民 高海东 《热力发电》 CAS 北大核心 2011年第8期38-40,共3页
在分析PID控制器设计常用的理想微分PID控制算法和实际微分PID控制算法的基础上,选择实际微分PID控制算法用于FCS165现场总线控制系统,并给出了抗积分饱和无扰动切换的方案。经长期测试和实际运行表明,实际微分PID控制算法控制效果较好。
关键词 fcs165现场总线控制系统 PID控制器 控制算法 实际微分PID抗积分饱和 无扰动切换
下载PDF
集散控制与现场控制的比较及对FCS技术的展望 被引量:10
15
作者 龚成龙 丁兆奎 《淮海工学院学报(自然科学版)》 CAS 2000年第3期29-32,共4页
近年来 ,由于计算机技术及计算机网络技术的进步 ,测控技术领域也因此发生了巨大变革 ,第五代过程控制体系结构 FCS已随着现场总线技术的发展而逐步形成。探讨过程控制体系结构从PCS到 FCS的发展情况 ,并对
关键词 集散控制系统 现场总线控制 现场总线
下载PDF
基于对象模型的WorldFIP FCS策略组态软件的研制 被引量:1
16
作者 梁庚 白焰 李文 《仪器仪表学报》 EI CAS CSCD 北大核心 2005年第12期1293-1297,1301,共6页
详尽介绍和阐述了一种应用于W orldF IP FCS的基于对象模型的策略组态软件的研制。系统阐述了该策略组态软件的结构和组成,讨论了该策略组态软件的组态模式。提出了一种基于对象模型的FCS组态软件设计模式,详尽给出了该组态软件基于对... 详尽介绍和阐述了一种应用于W orldF IP FCS的基于对象模型的策略组态软件的研制。系统阐述了该策略组态软件的结构和组成,讨论了该策略组态软件的组态模式。提出了一种基于对象模型的FCS组态软件设计模式,详尽给出了该组态软件基于对象模型的研制方法。在最后给出了一个具体的应用实例。 展开更多
关键词 fcs 对象模型 组态 控制策略 功能块 编译
下载PDF
基于PLC和FCS集中供热锅炉控制系统设计 被引量:13
17
作者 刘国华 《电力科学与技术学报》 CAS 2011年第2期118-122,共5页
针对目前部分热电厂供热锅炉控制系统相对简单、可靠性和优化控制性能不足的弊端,开发设计一种基于PLC和FCS相结合的供热锅炉控制系统.通过PLC和FCS相结合的组态编程,构建良好的人机界面,实现控制信息的可靠传输和锅炉系统的实时、动态... 针对目前部分热电厂供热锅炉控制系统相对简单、可靠性和优化控制性能不足的弊端,开发设计一种基于PLC和FCS相结合的供热锅炉控制系统.通过PLC和FCS相结合的组态编程,构建良好的人机界面,实现控制信息的可靠传输和锅炉系统的实时、动态监控,提高锅炉系统运行的可靠性、操作和维护的方便性.应用实例分析表明,该控制系统有效地实现了供热锅炉系统的集中与分布式控制. 展开更多
关键词 热电厂 供热锅炉 PLC fcs 控制系统
下载PDF
火电厂球磨机FCS上位监控系统仿真研究 被引量:1
18
作者 梁庚 白焰 李文 《系统仿真学报》 CAS CSCD 2004年第4期720-723,共4页
对火电厂球磨机现场总线控制系统的控制方案设计进行了详尽的阐述,给出了控制算法离线非实时仿真的结果。论证了上位监控系统控制效果实时仿真的必要性并详尽阐述了实时仿真方案确立及实施的方法及过程,给出了实时仿真的结果,指出了在... 对火电厂球磨机现场总线控制系统的控制方案设计进行了详尽的阐述,给出了控制算法离线非实时仿真的结果。论证了上位监控系统控制效果实时仿真的必要性并详尽阐述了实时仿真方案确立及实施的方法及过程,给出了实时仿真的结果,指出了在控制系统的设计开发中进行控制系统上位监控仿真的重要意义。 展开更多
关键词 fcs 监控系统 计算机仿真 神经元解耦 系统调试
下载PDF
FCS与DCS混合式集成控制系统研究 被引量:2
19
作者 吴瑞明 蒋志峰 《组合机床与自动化加工技术》 2005年第10期62-63,65,共3页
针对不同控制系统的兼容和升级问题,通过分析FCS和DCS两种控制方式的优缺点,提出了混合式集成控制系统,并从FCS和DCS输入输出总线的集成、FCS和DCS网络的集成、FCS和DCS的系统集成三个方面进行了阐述。通过基于CAN现场总线的多轴超声检... 针对不同控制系统的兼容和升级问题,通过分析FCS和DCS两种控制方式的优缺点,提出了混合式集成控制系统,并从FCS和DCS输入输出总线的集成、FCS和DCS网络的集成、FCS和DCS的系统集成三个方面进行了阐述。通过基于CAN现场总线的多轴超声检测系统,对混合式集成控制系统进行了应用分析。FCS/DCS的混合式集成控制系统方便了原有控制系统的升级,并且提高了系统的可靠性。 展开更多
关键词 混合控制系统 fcs DCS CAN总线 超声检测
下载PDF
基于FCS-MPC的电压跟踪调制方法 被引量:4
20
作者 吴德会 李钷 《电力自动化设备》 EI CSCD 北大核心 2015年第3期101-107,共7页
提出了一种利用有限集模型预测控制(FCS-MPC)策略的电压跟踪调制新方法,不使用常规策略中的基本电压矢量,而是直接将桥臂功率器件的开关时间作为主要控制量。通过一个开关时间约束条件,将控制模型转换为约束优化问题,并在此特殊的约束下... 提出了一种利用有限集模型预测控制(FCS-MPC)策略的电压跟踪调制新方法,不使用常规策略中的基本电压矢量,而是直接将桥臂功率器件的开关时间作为主要控制量。通过一个开关时间约束条件,将控制模型转换为约束优化问题,并在此特殊的约束下,控制模型的解满足"有限集"条件。以期望的连续电压矢量为预测模型的控制目标,电压控制误差为价值函数,该优化问题可通过FCS-MPC策略进行求解,得到电压跟踪调制结果。该跟踪调制方法的调制度可达到1,其PWM输出的总谐波畸变率显著减小。仿真和实验结果验证了所提方法的有效性和正确性。 展开更多
关键词 电压调制 电压控制 模型预测控制 有限集模型预测控制 脉宽调制 总谐波畸变率 预测模型 评价函数 谐波分析 优化
下载PDF
上一页 1 2 77 下一页 到第
使用帮助 返回顶部