Geomorphic signatures and active tectonics in western Saurashtra,Gujarat,India

Active tectonics in an area includes ongoing or recent geologic events.This paper investigates the tectonic influence on the subsidence,uplift and tilt of western Saurashtra through morphotectonic analysis of ten watersheds along with characteristics of relief and drainage orientation.Watersheds 7-9 to the north(N)are tectonically active,which can be linked with the North Kathiawar Fault System(NKFS)and followed by watersheds 6,10,1,4 and 5.Stream-length gradient index and sinuosity index indicate the effect of tectonic events along the master streams in watersheds 6-9.Higher R^(2)values of the linear curve fit for watershed 7 indicate its master stream is much more tectonically active than the others.The R^(2)curve fitting model and earthquake magnitude/depth analysis confirm the region to be active.The reactivation of the NKFS most likely led to the vertical movement of western Saurashtra.

The Middle and Lower Cambrian salt tectonics in the central Tarim Basin,China:A case study based on strike-slip fault characterization

Due to the considerable depth of the salt layers and the lack of calibration by exploratory drilling,the interpretation of the Middle and Lower Cambrian salt formations in the central Tarim Basin poses a challenge.In this paper,we apply the coupling and decoupling deformation theory in salt tectonics to analyze the No.7 fault mapped in the seismic datasets by the response characteristics of the Middle and Lower Cambrian layers.By quantifying the stratigraphic framework of the Middle and Lower Cambrian strata,we define the position of the salt layer with the seismic data.Structural decoupling is observed in the Middle and Lower Cambrian sequences in the Shuntuoguole Low Uplift,while deformation coupling is observed in these two sequences in the Shaya Uplift.

岩石圈伸展的壳/幔拆离模型(Parallel Extension Tectonics):华北克拉通东部早白垩世岩石圈减薄与破坏机理

华北克拉通岩石圈减薄和破坏机理长期以来存在争议,基于岩石学、岩石地球的化学分析研究突出强调深部过程的重要性。前人提出了两种重要模式:包括以拆沉作用为代表的top-down tectonics模型和以热-机械侵蚀与化学侵蚀,或地幔置换、交代作用的bottom-up tectonics模型。然而,对于这两种模式而言尚存在许多无法合理解释的问题,比如在此深部过程中,区域性岩石圈伸展有多大的贡献?地壳伸展构造是作为深部过程的响应,还是同为岩石圈伸展的产物?本文基于早白垩世东亚地区(尤其是华北克拉通东部地区)伸展构造与岩浆活动的综合分析,揭示出华北克拉通东部不同地区伸展构造变形与岩浆活动之间的时、空和成因关系有一定的差异。但整体上看,岩石圈伸展起着主导作用,控制着岩浆上侵和就位,在拆离断层下盘侵入形成各种规模的花岗质为主的侵入体,或于上盘喷发形成火山-沉积岩盆地。在伸展构造发育的不同阶段,可以有伸展早期、伸展期及伸展期后的岩浆活动。岩浆活动的强度及岩浆源区特点有显著的时空变化。一方面,在同一地区不同演化阶段其源区有很大的差异。表现为主体上是早期以古老下地壳源为主,随着壳/幔伸展作用演化,逐渐向混合源或独立幔源的演化。同时,不同地区岩浆源区的变化规律也显著不同。以胶辽地区为例,胶东整体上是壳幔混合源区对于岩浆演化有重要贡献;而辽东地区具有显著的源区演化特点:从剪切早期古老下地壳源区为主,并伴有幔源物质加入,剪切期古老下地壳为主,到剪切晚期和剪切期后以新生下地壳为主。本文认为岩石圈伸展的壳/幔拆离模型(Parallel Extension Tectonics),可以合理地解释华北克拉通及邻区早白垩世构造-岩浆活动性。在该模型中,遭受伸展的华北克拉通岩石圈发生壳-幔拆离作用。在岩石圈伸展作用期间,地壳层次的拆离作用与岩石圈地幔层次上的拆离作用可以是耦合的或者是解耦的,从而导致华北克拉通岩石圈减薄过程中在地壳尺度上的拆离作用与变质核杂岩的剥露有三种不同的类型:同岩浆活动型伸展(C型:Co-magmatism mode extension)、无岩浆活动型伸展(A型:Amagmatism mode extension)和多阶段混合型(M型:Multi-mode extension)。

Quantitative data about active tectonics and possible locations of strong earthquakes in the future in the northwestern Beijing

Deterministic, probabilistic and composite-grading methods are used to get the possible locations of strong earth-quakes in the future in Norwest Beijing and its vicinity based on the quantitative data and their accuracy about active tectonics in the research area and by ordering, some questions in the results are also discussed. It shows that the most dangerous fault segments for strong earthquakes in the future include: segments B and A of the southern boundary fault of the Yangyuan basin, the southern boundary fault of the Xuanhua basin, the east segment of the southern Huaian fault and the east segment of the northern YanggaoTianzhen fault. The most dangerous area is YangyuanShenjing basin, the second one is TianzhenHuaianXuanhua basin and the third dangerous areas are WanquanZhangjiakou and northeast of Yuxian to southwest of Fanshan.

关于“Tectonics”中文译名的思考

"Tecto nics"作为近十多年来引入中国的一个重要的建筑学概念,其中文译名的确定关乎如伺理解以其为主题的理论,进而对中国的与之相关的建筑学理论与实践产生影响。在简要追溯欧美建筑理论史中"tectonics"意涵演变的基础上,分析了"建构"作为其中文译名的形成过程及其合理与不足之处,并且讨论了其他译名的可能性。

The boring billion? - Lid tectonics, continental growth and environmental change associated with the Columbia supercontinent

The evolution of Earth＇s biosphere,atmosphere and hydrosphere is tied to the formation of continental crust and its subsequent movements on tectonic plates.The supercontinent cycle posits that the continental crust is periodically amalgamated into a single landmass,subsequently breaking up and dispersing into various continental fragments.Columbia is possibly the first true supercontinent,it amalgamated during the 2.0-1.7 Ga period,and collisional orogenesis resulting from its formation peaked at 1.95-1.85 Ga.Geological and palaeomagnetic evidence indicate that Columbia remained as a quasi-integral continental lid until at least 1.3 Ga.Numerous break-up attempts are evidenced by dyke swarms with a large temporal and spatial range; however,palaeomagnetic and geologic evidence suggest these attempts remained unsuccessful.Rather than dispersing into continental fragments,the Columbia supercontinent underwent only minor modifications to form the next supercontinent （Rodinia） at 1.1 -0.9 Ga; these included the transformation of external accretionary belts into the internal Grenville and equivalent collisional belts.Although Columbia provides evidence for a form of ‘lid tectonics’,modern style plate tectonics occurred on its periphery in the form of accretionary orogens.The detrital zircon and preserved geological record are compatible with an increase in the volume of continental crust during Columbia＇s lifespan; this is a consequence of the continuous accretionary processes along its margins.The quiescence in plate tectonic movements during Columbia＇s lifespan is correlative with a long period of stability in Earth＇s atmospheric and oceanic chemistry.Increased variability starting at 1.3 Ga in the environmental record coincides with the transformation of Columbia to Rodinia; thus,the link between plate tectonics and environmental change is strengthened with this interpretation of supercontinent history.

Stagnant lid tectonics:Perspectives from silicate planets,dwarf planets, large moons,and large asteroids

To better understand Earth's present tectonic style-plate tectonics—and how it may have evolved from single plate(stagnant lid) tectonics, it is instructive to consider how common it is among similar bodies in the Solar System. Plate tectonics is a style of convection for an active planetoid where lid fragment(plate) motions reflect sinking of dense lithosphere in subduction zones, causing upwelling of asthenosphere at divergent plate boundaries and accompanied by focused upwellings, or mantle plumes;any other tectonic style is usefully called "stagnant lid" or "fragmented lid". In 2015 humanity completed a 50+ year effort to survey the 30 largest planets, asteroids, satellites, and inner Kuiper Belt objects,which we informally call "planetoids" and use especially images of these bodies to infer their tectonic activity. The four largest planetoids are enveloped in gas and ice(Jupiter, Saturn, Uranus, and Neptune)and are not considered. The other 26 planetoids range in mass over 5 orders of magnitude and in diameter over 2 orders of magnitude, from massive Earth down to tiny Proteus; these bodies also range widely in density, from 1000 to 5500 kg/m^3. A gap separates 8 silicate planetoids with ρ = 3000 kg/m^3 or greater from 20 icy planetoids(including the gaseous and icy giant planets) with ρ = 2200 kg/m^3 or less. We define the "Tectonic Activity Index"(TAI), scoring each body from 0 to 3 based on evidence for recent volcanism, deformation, and resurfacing(inferred from impact crater density). Nine planetoids with TAI = 2 or greater are interpreted to be tectonically and convectively active whereas 17 with TAI <2 are inferred to be tectonically dead. We further infer that active planetoids have lithospheres or icy shells overlying asthenosphere or water/weak ice. TAI of silicate(rocky) planetoids positively correlates with their inferred Rayleigh number. We conclude that some type of stagnant lid tectonics is the dominant mode of heat loss and that plate tectonics is unusual. To make progress understanding Earth's tectonic history and the tectonic style of active exoplanets, we need to better understand the range and controls of active stagnant lid tectonics.

Control of Deep Tectonics on the Superlarge Deposits in China

Seventy-three large-superlarge deposits in China were formed in 4 metallogenic epochs, and located in 6 metallogenic domains. By combing their time-space distribution and the relevant data of crustal thickness, we discuss the control conditions of deep tectonics on superlarge deposits. The various spatial variation of the crustal thickness where deposits locate is closely related to their different tectonic setting. The crustal thickness of the region where deposits are in the Precatnbrian metallogenic epoch is 37.1 km and shows double-peak distribution, which is related to the different tectonic-mineralization processes in the Tarim-North China and Yangtze metallogenic domains. The crustal thickness of the region where deposits are in the Paleoproterozoic metallogenic epoch is 43.4 km and shows normal distribution, which is the result of 'pure' mineralization setting. The crustal thickness of the region where deposits are in the Late Palaeozoic-Early Mesozoic metallogenic epoch is about 41.2 km and shows multi-peak distribution, which can be related with dispersing distribution in the metallogenic domain of these superlarge deposits. The crustal thickness of the region where deposits are in the post-Indosinian metallogenic epoch is 37.3 km, and shows skew distribution, which resulted from different tectonic settings in eastern and western China.

Active Tectonics of the Longmen Shan Region on the Eastern Margin of the Tibetan Plateau

There is a massive amount of geomorphic evidence for active tectonics in the Longmen Shan at the eastern margin of the Tibetan plateau. We have surveyed some typical geomorphic markers including the Wenchuan-Maowen, Beichuan-Yingxiu and Pengxian-Guanxian faults, terrace offsets, scarps, fault-controlled saddles, dextral shutter ridges, dextral channel offsets, graben, shatter belts, and pull-apart basins. Electron spin resonance （ESR） and thermoluminescence（TL） ages were obtained using silty sand taken from below the surface of the sediments. According to these data, we calculated the rates of thrusting and strike-slip, and the results indicate that Cenozoic tectonic shortening at the plateau margin is minor with the rate of thrusting less than 1.10 mm/a and the rate of strike-slipping less than 1.46 mm/a. The Longmen Shan is a zone of NNE-trending dextral shear with slip-dip ratio of 6：1-1.3：1. From NW to SE, the thrust component becomes smaller, whereas the strike-slip component becomes larger.

Jurassic Tectonics of North China:A Synthetic View

This paper gives a synthetic view on the Jurassic tectonics of North China, with an attempt to propose a framework for the stepwise tectonic evolution history. Jurassic sedimentation, deformation and magmatism in North China have been divided into three stages. The earliest Jurassic is marked by a period of magmatism quiescence （in 205-190 Ma） and regional uplift, which are considered to be the continuation of the “Indosinian movement” characterized by continent-continent collision between the North and South China blocks. The Early to Middle Jurassic （in 190-170 Ma） was predominated by weak lithospheric extension expressed by mantle-derived plutonism and volcanism along the Yanshan belt and alongside the Tan-Lu fault zone, normal faulting and graben formation along the Yinshan- Yanshan tectonic belt, depression and resuming of coal-bearing sedimentation in vast regions of the North China block （NCB）. The Middle to Late Jurassic stage started at 165y.5 Ma and ended up before 136 Ma; it was dominated by intensive intraplate deformation resulting from multi-directional compressions. Two major deformation events have been identified. One is marked by stratigraphic unconformity beneath the thick Upper Jurassic molasic series in the foreland zones of the western Ordos thrust-fold belt and along the Yinshan-Yanshan belt; it was predated 160 Ma. The other one is indicated by stratigraphic unconformity at the base of the Lower Cretaceous and predated 135 Ma. During this last stage, two latitudinal tectonic belts, the Yinshan-Yanshan belt in the north and the Qinling-Dabie belt in the south, and the western margin of the Ordos basin were all activated by thrusting; the NCB itself was deformed by the NE to NNE-trending structural system involving thrusting, associated folding and sinistral strike-slip faulting, which were spatially partitioned. Foliated S-type granitic plutons aged 160-150 Ma were massively emplaced in the Jiao-Liao massif east of the Tan-Lu fault zone and indicate important crustal thickening in this part of the NCB. The Jurassic deformation patterns, different tectonic systems and multi-directional contractions in North China recorded far-field effects of synchronous convergences, toward the East Asian continent, of three different plates, the Siberian plate in the north, the paleo-Pacific oceanic plate in the east and the Lhasa block in the southwest. This Middle to Late Jurassic intraplate orogenesis and pervasive shortening deformation preceded lithospheric attenuation and thinning in East China, which most possibly started by the Early Cretaceous around 135 Ma.

Initiation of plate tectonics in the Hadean: Eclogitization triggered by the ABEL Bombardment

When plate tectonics began on the Earth has been long debated and here we argue this topic based on the records of Earth-Moon geology and asteroid belt to conclude that the onset of plate tectonics was during the middle Hadean（4.37-4.20 Ga）. The trigger of the initiation of plate tectonics is the ABEL Bombardment, which delivered oceanic and atmospheric components on a completely dry reductive Earth, originally comprised of enstatite chondrite-like materials. Through the accretion of volatiles, shock metamorphism processed with vaporization of both CI chondrite and supracrustal rocks at the bombarded location, and significant recrystallization went through under wet conditions, caused considerable eclogitization in the primordial continents composed of felsic upper crust of 21 km thick anorthosite, and 50 km or even thicker KREEP lower crust. Eclogitization must have yielded a powerful slab-pull force to initiate plate tectonics in the middle Hadean. Another important factor is the size of the bombardment. By creating Pacific Ocean class crater by 1000 km across impactor, rigid plate operating stagnant lid tectonics since the early Hadean was severely destroyed, and oceanic lithosphere was generated to have bi-modal lithosphere on the Earth to enable the operation of plate tectonics.Considering the importance of the ABEL Bombardment event which initiated plate tectonics including the appearance of ocean and atmosphere, we propose that the Hadean Eon can be subdivided into three periods：（1） early Hadean（4.57-4.37 Ga）,（2） middle Hadean（4.37-4.20 Ga）, and（3） late Hadean（4.20-4.00 Ga）.

Late Mesozoic basin and range tectonics and related magmatism in Southeast China

During the Late Mesozoic Middle Jurassic--Late Cretaceous, basin and range tectonics and associated magmatism representative of an extensional tectonic setting was widespread in southeastern China as a result of Pacific Plate subduction. Basin tectonics consists of post-orogenic （Type I） and intra-continental extensional basins （Type II）. Type I basins developed in the piedmont and intraland during the Late Triassic to Early Jurassic, in which coarse-grained terrestrial clastic sediments were deposited. Type II basins formed during intra-continental crustal thinning and were characterized by the development of grabens and half-grabens. Graben basins were mainly generated during the Middle Jurassic and were associated with bimodal volcanism. Sediments in half-grabens are intercalated with rhyolitic tufts and lavas and are Early Cretaceous in age with a dominance of Late Cretaceous-Paleogene red beds. Ranges are composed of granitoids and bimodal volcanic rocks, A-type granites and dome-type metamorphic core complexes. The authors analyzed lithological, geochemical and geochronological features of the Late Mesozoic igneous rock assemblages and proposed some geodynamical constraints on forming the basin and range tectonics of South China. A comparison of the similarities and differences of basin and range tectonics between the eastern and western shores of the Pacific is made, and the geo- dynamical evolution model of the Southeast China Block during Late Mesozoic is discussed. Studied results suggest that the basin and range terrane within South China developed on a pre-Mesozoic folded belt was derived from a polyphase tectonic evolution mainly constrained by subduction of the western Pacific Plate since the Late Mesozoic, leading to formation of various magmatism in a back-arc exten- sional setting. Its geodynamic mechanism can compare with that of basin and range tectonics in the eastern shore of the Pacific. Differences of basin and range tectonics between both shores of the Pacific, such as mantle plume formation, scales of extensional and igneous rock assemblages and the age of basin and range tectonics, were caused mainly by the Yellowstone mantle plume in the eastern shore of the Pacific.

Characteristics and evolution of strike-slip tectonics of the Liaohe Western Sag,Bohai Bay Basin

Because of its rich oil and gas resources and the special tectonic location of the Liaohe Western Sag （the Tanlu Fault traverses the sag）, Bohai Bay Basin, a detailed study of its strike-slip tectonics is significant in revealing the sag＇s tectonic evolution, its control on hydrocarbon accumulation, and the activity history of the northern section of the Tanlu Fault in the Cenozoic. Through systematic structure analysis of 3D seismic data of the Liaohe Western Sag, combined with balanced section analysis, a variety of structural features in relation to right-lateral strike-slip faults, such as echelon normal faults, ＂comb＂ structure, ＂flower＂ structure,＂interpretable＂ and ＂buried＂ strike-slip faults have been revealed exist in the Liaohe Western Sag. According to the research in this paper, the complex structural phenomena in the Liaohe Western Sag could be reasonably interpreted as right-lateral strike-slip activity and the strike-slip activities of the Liaohe Western Sag began in the early Oligocene. The activity was weak at the beginning （E3s1-2）, then strengthened gradually and reached its strongest level in the late Oligocene （E3d1）. In the Miocene, the strike-slip activity was low and then strengthened significantly once again from the Pliocene to the present. It is speculated that the entire northern section of the Tanlu Fault has had a similar evolution history since the Oligocene.

The Impact of the Linked Factors of Provenance,Tectonics and Climate on Potash Formation:An Example from the Potash Deposits of Lop Nur Depression in Tarim Basin,Xinjiang,Western China

Potash deposits commonly accumulate in highly restricted settings at the final stage of brine evaporation. This does not mean that potash deposits are formed simply as a result of the evaporation concentration of seawater or lake water, but rather as a coupling result of particular provenance, tectonics and climate activities. In this paper, we focus on the formative mechanism of the potash deposits of Lop Nur depression in Tarim Basin to interpret the detailed coupling mechanism among provenance, tectonics and climate. In terms of the provenance of Lop Nur Lake, the water of the Tarim River which displays ＂potassium-rich＂ characteristics play an important role. In addition, the Pliocene and Lower-Middle Pleistocene clastic beds surrounding Lop Nur Lake host a certain amount of soluble potassium and thus serves as ＂source beds＂ for potash formation. During the late Pliocene, the Lop Nur region has declined and evolved into a great lake from the previous piedmont and diluvial fan area. Since the mid Pleistocene, the great-united Lop Nur Lake has been separated and has generated a chain system consisting of Taitema Lake, Big Ear Lake and Luobei Lake which has turned into the deepest sag in Lop Nur Lake. Dry climate in Lop Nur region has increased since the Pliocene, and became extreme at the late Pleistocene. The study implies that potash formation in Lop Nur Lake depends on the optimal combination of extreme components of provenance, tectonics and climate during a shorter-term period. The optimal patterns of three factors are generally characterized by the long-term accumulation and preliminary enrichment of potassium, the occurrence of the deepest sub-depression and the appearance of an extremely arid climate in Lop Nur region. These factors have been interacting synergistically since the forming of the saline lake and in the later stages strong ＂vapor extraction＂ caused by extremely arid climate is needed to trigger large scale mineralization of potash deposits.

A planet in transition:The onset of plate tectonics on Earth between 3 and 2 Ga?

Many geological and geochemical changes are recorded on Earth between 3 and 2 Ga.Among the more important of these are the following:(1)increasing proportion of basalts with"arc-like"mantle sources;(2)an increasing abundance of basalts derived from enriched(EM)and depleted(DM)mantle sources;(3)onset of a Great Thermal Divergence in the mantle;(4)a decrease in degree of melting of the mantle;(5)beginning of large lateral plate motions;(6)appearance of eclogite inclusions in diamonds;(7)appearance and rapid increase in frequency of collisional orogens;(8)rapid increase in the production rate of continental crust as recorded by zircon age peaks;(9)appearance of ophiolites in the geologic record,and(10)appearance of global LIP(large igneous province)events some of which correlate with global zircon age peaks.All of these changes may be tied directly or indirectly to cooling of Earth's mantle and corresponding changes in convective style and the strength of the lithosphere,and they may record the gradual onset and propagation of plate tectonics around the planet.To further understand the changes that occurred between 3 and 2 Ga,it is necessary to compare rocks,rock associations,tectonics and geochemistry during and between zircon age peaks.Geochemistry of peak and inter-peak basalts and TTGs needs to be evaluated in terms of geodynamic models that predict the existence of an episodic thermal regime between stagnant-lid and plate tectonic regimes in early planetary evolution.

Uniform Strike-Slip Rate along the Xianshuihe-Xiaojiang Fault System and Its Implications for Active Tectonics in Southeastern Tibet

Recent studies on the Xianshuihe-Xiaojiang fault system suggest that the Late Quaternary strike-slip rate is approximately uniform along the entire length of the fault zone, about 15±2 mm/a. This approximately uniform strike slip rate strongly supports the clockwise rotation model of the southeastern Tibetan crust. By approximating the geometry of the arc-shaped Xianshuihe-Xiaojiang fault system as a portion of a small circle on a spherical Earth, the 15±2 mm/a strike slip rate corresponds to clockwise rotation of the Southeastern Tibetan Block at the （5.2±0.7）×10^-7 deg/a angular velocity around the pole （21°N, 88°E） relative to the Northeast Tibetan Block. The approximately uniform strike slip rate along the Xianshuihe-Xiaojiang fault system also implies that the Longmeushan thrust zone is not active, or at least its activity has been very weak since the Late Quaternary. Moreover, the total offset along the Xiaushuihe-Xiaojiang fault system suggests that the lateral extrusion of the Southeastern Tibetan Block relative to Northeastern Tibetan Block is about 160 km and 200-240 km relative to the Tarim-North China block. This amount of lateral extrusion of the Tibetan crust should have accommodated about 13-24% convergence between India and Eurasia based on mass balance calculations. Assuming that the slip rate of 15±2 mm/a is constant throughout the entire history of the Xianshuihe-Xiaojiang fault system, 11±1.5 Ma is needed for the Xianshuihe-Xiaojiang fault system to attain the 160 km of total offset. This implies that left-slip faulting on the Xianshuihe-Xiaojiang fault system might start at 11±1.5 Ma.

Evolution of Sedimentation and Tectonics of the Youjiang Composite Basin, South China

Located at the southern margin of the South China plate, the Youjiang basin is a closely related to the NW- and NE-trending syndepositional faults in respect to the configuration and structure of the basin. The evolution of the Youjiang basin progressed through two stages. In the Hercynian period, the opening of the Ailaoshan-Honghe ocean basin gave rise to a number of NW-trending rift belts in the Youjiang area. During this period, deep-water sediments were dominant and the basin was possesed of the characteristics of the rift system of passive continental margins. In the early Indosinian after the Dongwu movement, the circum - Pacific tectonism led to a major change in the configuration and structure of the basin. In the meantime, the Ailaoshan ocean basin began to be subducted towards the northeast, thus causing the basin to be split and expand again, and then the basin developed into the stage of the back -arc basin. At the end of the Indosinian period, the basin gradually closed from east to west, thus ending up the history of development of the Youjiang basin. In the various developmental stages, sediments in the basin, also limited by the Dongwu movement, were formed by superposition of sedimentation systems with different features, and a typical two-layered structure, which consisted of starved and compensated sediments, also occurred in the early stage. Likewise, volcanic activity in the basin involved two stages. Basin volcanic rocks of alkali and alkali-calcic series, which were controlled by NW-trending faults, occurred in the early stage, and basic and intermediate-acid volcanic rocks of calc-alkali and calcic series, which were controlled by NW- and NE-trending faults. From the above it follows that the Youjiang basin was formed by the combined action of the Palaeotethys and circum -Pacific tectonism.

Controls of Tectonics on both Sedimentary Sequences and Petroleum Systems in Tarim Basin, Northwest China

Various orders of sequences were recognized in the Tarim Basin from unconformities. Three mega-sequence groups, six mega-sequences, sixteen super-sequences and forty-two sequences were determined from the Sinian to the Quaternary. The mega-sequences and super-sequences were in accordance with the locally tectonic events occurring in both the north and the south margins of the Tarim plate. The global sea level changes only worked to control formations in the tectonically stable periods or in the low order sequences. The sequences had close relationship to the source rocks, reservoirs and cap rocks, and the tectonic events determined the migration, accumulation, and preservation of the hydrocarbon. The three mega-sequence group cycles, including the early cycle-the Sinian-middle Devonian, the middle cycle-the upper Devonian-Triassic, and the late cycle-the Jurassic-Quaternary, corresponded to three reservoir formation cycles. So, it can be concluded that the local tectonic events controlled both the sequences and the distribution of oil and gas in the Tarim Basin.

Early Paleozoic tectonics of Asia:Towards a full-plate model

Asia is key to a richer understanding of many important lithospheric processes such as crustal growth,continental evolution and orogenesis. But to properly decipher the secrets Asia holds, a first-order tectonic context is needed. This presents a challenge, however, because a great variety of alternative and often contradictory tectonic models of Asia have flourished. This plethora of models has in part arisen from efforts to explain limited observations(in space, time or discipline) without regard for the broader assemblage of established constraints. The way forward, then, is to endeavor to construct paleogeographic models that fully incorporate the diverse constraints available, namely from quantitative paleomagnetic data, the plentiful record of geologic and paleobiologic observations, and the principles of plate tectonics. This paper presents a preliminary attempt at such a synthesis concerning the early Paleozoic tectonic history of Asia. A review of salient geologic observations and paleomagnetic data from the various continental blocks and terranes of Asia is followed by the presentation of a new, full-plate tectonic model of the region from middle Cambrian to end-Silurian time(500-420 Ma). Although this work may serve as a reference point, the model itself can only be considred provisional and ideally it will evolve with time. Accordingly, all the model details are released so that they may be used to test and improve the framework as new discoveries unfold.

A challenge to the concept of slip-lines in extrusion tectonics

Wide-open V-shaped conjugate strike-slip faults in Asia are typically related to extrusion tectonics. However, the tectonic model based on the slip-line theory of plasticity has some critical problems associated with it. The conjugate sets of slip-lines in plane deformation, according to the theory of plasticity should be normal to each another but, in reality, the angles between the conjugate strike-slip faults, which are regarded as slip-lines in extrusion tectonics in the eastern Mediterranean, Tibet-middle Asia, China and the Indochina Peninsular regions, are always more than 90° （on average -110°） in the direction of contraction. Another problem is that the slip-line theory fails to explain how, in some cases, e.g., in the Anatolian area in the eastern Mediterranean, the extrusion rate is much higher than the indent rate. The two major problems are easy to solve in terms of the Maximum-Effective-Moment （MEM） Criterion that predicts that orientations of the shear zones are theoretically at an angle of 54.7° and practically at angles of 55°± 10° with the σ1- or contractional direction. The orientations of the strike-slip faults that accommodate extrusion tectonics are, therefore, fundamentally controlled by the MEM Criterion. When extrusion is along the MEM-orientations, the extruding rate is normally higher than the indenting rate.