A state-of-the-art review on transition between the fast fluidization and pneumatic transport of Geldart group B particles

The fluidization state in the circulating fluidized bed(CFB)boiler is crucial to its stable and safe operation.However,up to now,the research field has not reached unanimity on whether the fluidization regime that the upper furnace of the boiler operates in is the fast fluidization or pneumatic transport.To this end,this paper reviewed relevant research on the transition between the fast fluidization and pneumatic transport of Geldart group B particles,including the flow characteristics of the fast fluidization,the transition condition between the fast fluidization and pneumatic transport,the determination methods of the transport velocity utr and saturation carrying capacity G_(s)* and the influencing factors on these two parameters.Previous research findings can provide certain guidelines for the design and optimization of the CFB boiler,and result in plenty of prediction correlations for utr and G_(s)*.Nonetheless,owing to insufficient data available on Geldart group B particles,especially the ones obtained under high temperature or pressure conditions and in large-scale CFB apparatuses,the existing correlations are not well suited for the prediction of u_(tr) and G_(s)* of Geldart group B particles.Thus,further efforts are urgently demanded on the fast fluidization transition of Geldart group B particles.

Experiments on particle cluster behaviors in a fast fluidized bed

A three-dimensional(3D) fast fluidized bed with the riser of 3.0 m in height and 0.1 m in inner diameter was established to experimentally study the cluster behaviors of Geldart B particles. Five kinds of quartz sand particles(dp= 0.100, 0.139, 0.177, 0.250 and 0.375 mm and ρp= 2480 kg·m^(-3)) were respectively investigated, with the total mass of the bed material kept as 10 kg. The superficial gas velocity in the riser ranges from 2.486 to 5.594 m·s^(-1) and the solid mass flux alters from 30 to 70 kg·((m^(-2)·s))^(-1). Cluster characteristics and evolutionary processes in the different positions of the riser were captured by the cluster visualization systems and analyzed by the self-developed binary image processing. The results found four typical cluster structures in the riser,i.e., the macro stripe-shaped cluster, saddle-shaped cluster, U-shaped cluster and the micro cluster. The increasing superficial gas velocity and particle sizes result in the increasing average cluster size and the decreasing cluster time fraction, while the solid mass flux in the riser have the reverse influences on the cluster size and time fraction. Additionally, clusters in the upper region of the riser often have the larger size and time fraction than that in the lower region. All these effects of operating conditions on clusters become less obvious when particle size is less than 0.100 mm.

Fluidization science,its development and future

By revisiting the three stage theory for the progress of science proposed by Taketani in 1942, the footmarks of fluidization research are examined. The bubbling and fast fluidization issues were emphasized so that the future offluidization research can be discussed among scientists and engineers in a wider perspective. The first cycle of fluidization research was started in the early 1940s by an initial stage of phenomenology. The second stage of structural studies was kicked off in the early 1950s with the introduction of the two phase theory. The third stage of essential studies occurred in the early 1960s in the form of bubble hydrodynamics. The second cycle, which confirmed the aforementioned three stages closed at the turn of the century, established a general understanding of suspension structures including agglomerating fluidization, bubbling, turbulent and fast fluidizations and pneumatic transport; also established powerful measurement and numerical simulation tools.After a general remark on science, technology and society issues the interactions between fluidization technology and science are revisited. Our future directions are discussed including the tasks in the third cycle, particularly in its phenomenology stage where strong motivation and intention are always necessary, in relation also to the green reforming of the present technology. A generalized definition of ＇fluidization＇ is proposed to extend fluidization principle into much wider scientific fields, which would be effective also for wider collaborations.