Fault detection filter design for linear discrete time-varying systems with multiplicative noise

The problem of fault detection for linear discrete timevarying systems with multiplicative noise is dealt with.By using an observer-based robust fault detection filter（FDF） as a residual generator,the design of the FDF is formulated in the framework of H ∞ filtering for a class of stochastic time-varying systems.A sufficient condition for the existence of the FDF is derived in terms of a Riccati equation.The determination of the parameter matrices of the filter is converted into a quadratic optimization problem,and an analytical solution of the parameter matrices is obtained by solving the Riccati equation.Numerical examples are given to illustrate the effectiveness of the proposed method.

H_-/H_∞ fault detection filter design for interval time-varying delays switched systems

The problem of the robust fault detection filter design for time-varying delays switched systems is considered in the framework of mixed H-/H∞. Firstly, the weighted H∞ performance index is utilized as the robustness performance, and the H- index is used as the sensitivity performance for obtaining the robust fault detection filter. Then a novel multiple Lyapunov-Krasovskii function is proposed for deriving sufficient existence conditions of the robust fault detection filter based on the average dwell time technique. By introducing slack matrix variable, the coupling between the Lyapunov matrix and system matrix is removed, and the conservatism of results is reduced. Based on the robust fault detection filter, residual is generated and evaluated for detecting faults. In addition, the results of this paper are dependent on time delays,and represented in the form of linear matrix inequalities. Finally,the simulation example verifies the effectiveness of the proposed method.

Robust fault detection filter design for a class of time-delay systems via equivalent transformation

This paper is concerned with the robust fault detection filter （RFDF） design for a class of linear time- invariant systems （LTISs） with output state time delays. Although existing results in literatures study the RFDF for time- delay systems, few is concerned with the output state time-delay systems. The basic idea of our study is to eliminate the time delays of system and transform it to a delay-free system （i.e., a linear time-invariant system without time delays） by the bicausal change of coordinates approach. Then, we design the RFDF for the delay-free LTIS, which is equivalent to the original system with time delays. We first introduce a class of systems with output state time delays, whose fault can be detected by using the RFDF design approach for delay-free systems. Then, since the RFDF design problem can be formulated as a standard H-infinity-model matching problem, it is solved by using H-infinity-optimization LMI techniques. In the last, the adaptive threshold of fault detection is chosen and an illustrative design example is used to demonstrate the validity of the design approach.

Design of parametric fault detection systems: An H-infinity optimization approach

Problems related to the design of observer-based parametric fault detection(PFD) systems are studied. The core of our study is to first describe the faults occurring in systemactuators, sensors and components in the form of additive parameter deviations, then to transformthe PFD problems into a similar additive fault setup, based on which an optimal observer-basedoptimization fault detection approach is proposed. A constructive solution optimal in the sense ofminimizing a certain performance index is developed. The main results consist of defining parametricfault detectability, formulating a PFD optimization problem and its solution. A numerical exampleto demonstrate the effectiveness of the proposed approach is provided.

Optimal fault detection for a class of discrete-time switched linear systems

This paper deals with the problem of optimal fault detection filter （FDF） design for a class of discrete-time switched linear systems under arbitrary switching. By using an observer-based FDF as a residual generator, the design of the FDF is formulated into an optimization problem through maximizing the H_/H∞ or H∞/H∞ performance index. With the aid of an operator optimization method, it is shown that a mode-dependent unified optimal solution can be derived by solving a coupled Riccati equation. A numerical example is given to show the effectiveness of the proposed method.

Fault tolerant navigation method for satellite based on information fusion and unscented Kalman filter

An effective autonomous navigation system for the integration of star sensor,infrared horizon sensor,magnetometer,radar altimeter and ultraviolet sensor is developed.The requirements of the integrated navigation system manager make optimum use of the various navigation sensors and allow rapid fault detection,isolation and recovery.The normal full fusion feedback method of federated unscented Kalman filter（UKF） cannot meet the needs of it.So a no-reset feedback federated Kalman filter architecture is developed and used in the autonomous navigation system.The minimal skew sigma points are chosen to improve the calculation speed.Simulation results are presented to demonstrate the advantages of the algorithm.These advantages include improved failure detection and correction,improved computational efficiency,and reliability.Additionally,its＇ accuracy is higher than that of the full fusion feedback method.

Fault Detection for a Class of Impulsive Switched Systems

The problem of fault detection for a class of nonlinear impulsive switched systems is investigated in this paper. Fault detection filters are designed such that the augmented systems are stable, and the residual error signal generated by the filters guarantees the H∞ performance for disturbances and faults. Sufficient conditions for the design of fault detection(FD) filters are presented by linear matrix inequalities. Moreover, the filter gains are characterized according to a solution of a convex optimization. Finally, an example derived from a pulse-width-modulation-driven boost converter is given to illustrate the effectiveness of the FD design approach.

A Fault-tolerance Estimating Method for Ionosphere Corrections in Satellite Navigation System

Aiming to the reliable estimates of the ionosphere differential corrections for the satellite navigation system in the presence of the ionosphere anomaly, a fault-tolerance estimating method, which is based on the distributed Kalman filtering, is proposed. The method utilizes the parallel sub-filters for estimating the ionosphere differential corrections. Meanwhile, an infinite norm （IN） method is proposed for the detection of the ionosphere irregularity in the filter processing. Once the anomaly is detected, the sub-filter contaminated by the anomaly measurements will be excluded to ensure the reliability of the estimates. The simulation is conducted to validate the method and the results indicate that the anomaly can be found timely due to the novel fault detection method based on the infinite norm. Because of the parallel sub-filter architecture, the measurements are classified by the spatial distribution so that the ionosphere anomaly can be positioned and excluded more easily. Thus, the method can provide the robust and accurate ionosphere differential corrections.