Fe^3＋ -doped nanometer TiO2 photocatalysts were prepared by sol-gel technique. TiO2 powders with different Fe^3＋ / Ti^4 ＋ molar ratios ranging from 0. 05% to 25% were synthesized by calcinating the gels in the temp...Fe^3＋ -doped nanometer TiO2 photocatalysts were prepared by sol-gel technique. TiO2 powders with different Fe^3＋ / Ti^4 ＋ molar ratios ranging from 0. 05% to 25% were synthesized by calcinating the gels in the temperature range of 200-600 ℃ . The effects of the content of iron ions and calcination temperature on the physical properties of the powders and their photocatalytic activities were examined by the photodecorapositon of methyl orange in sunlight. The results show that Fe dopant can decrease the temperature of nanatase-ratile transformation. The ideal photocatalytic property was achieved when the sample with an Fe^3＋ / Ti^4＋ ratio of 20 at% was calcined at about 300 ℃ for an hour, which is superior to that of commercial Degussa P-25. The optimum microstructure of the Fe-doped TiO2 for a high photocatalytic activity in sunlight is consisted of nanatase and ratile.展开更多
Peroxidase plays an important role in living systems;however,its storage difficulty and easy inactivation have limited its applications in complex environments.To address these problems,herein,we proposed a method to ...Peroxidase plays an important role in living systems;however,its storage difficulty and easy inactivation have limited its applications in complex environments.To address these problems,herein,we proposed a method to synthesize peroxidase mimics by amination,carbonization,and Fe^(3+)-doping of industrial alkali lignin.The Fe^(3+)-doped lignin-based peroxidase mimic(Fe-LPM),with active centers of coordination between Fe^(3+)and N atoms,showed higher tolerance to pH value and temperature than natural peroxidase.Using Fe-LPM,10-100 mmol/L of H_(2)O_(2) and glucose could be colorimetrically detected with the lowest detection limits of 80μmol/L and 1.5 mmol/L and visual detection limits of 1.0 mmol/L and 10 mmol/L,respectively.The Fe-LPM maintained peroxidase-like activity after 10 cycles and could even be used for H_(2)O_(2) detection in practical samples.This work not only provides a new approach to synthesize peroxidase mimics using biomass materials but also promotes the high-value utilization of lignin.展开更多
The development of an efficient artificial H_(2)O_(2) photosynthesis system is a challenging work using H_(2)O and O_(2) as starting materials.Herein,3D In_(2.77)S_(4) nanoflower precursor was in-situ deposited on K^(...The development of an efficient artificial H_(2)O_(2) photosynthesis system is a challenging work using H_(2)O and O_(2) as starting materials.Herein,3D In_(2.77)S_(4) nanoflower precursor was in-situ deposited on K^(+)-doped g-C_(3)N_(4)(KCN)nanosheets using a solvothermal method,then In_(2.77)S_(4)/KCN(IS/KCN)het-erojunction with an intimate interface was obtained after a calcination process.The investigation shows that the photocatalytic H_(2)O_(2) production rate of 50IS/KCN can reach up to 1.36 mmol g^(-1)h^(-1)without any sacrificial reagents under visible light irradiation,which is 9.2 times and 4.1 times higher than that of KCN and In_(2.77)S_(4)/respectively.The enhanced activity of the above composite can be mainly attributed to the S-scheme charge transfer route between KCN and In_(2.77)S_(4) according to density functional theory calculations,electron paramagnetic resonance and free radical capture tests,leading to an expanded light response range and rapid charge separation at their interface,as well as preserving the active electrons and holes for H_(2)O_(2) production.Besides,the unique 3D nanostructure and surface hydrophobicity of IS/KCN facilitate the diffusion and transportation of O_(2) around the active centers,the energy barriers of O_(2) protonation and H_(2)O_(2) desorption steps are ef-fectively reduced over the composite.In addition,this system also exhibits excellent light harvesting ability and stability.This work provides a potential strategy to explore a sustainable H_(2)O_(2) photo-synthesis pathway through the design of heterojunctions with intimate interfaces and desired reac-tion thermodynamics and kinetics.展开更多
This study delves into the charge transfer mechanism of boron (B)-doped 3C-SiC through first-principles investigations. We explore the effects of B doping on the electronic properties of 3C-SiC, focusing on a 12.5% im...This study delves into the charge transfer mechanism of boron (B)-doped 3C-SiC through first-principles investigations. We explore the effects of B doping on the electronic properties of 3C-SiC, focusing on a 12.5% impurity concentration. Our comprehensive analysis encompasses structural properties, electronic band structures, and charge density distributions. The optimized lattice constant and band gap energy of 3C-SiC were found to be 4.373 Å and 1.36 eV respectively, which is in agreement with previous research (Bui, 2012;Muchiri et al., 2018). Our results show that B doping narrows the band gap, enhances electrical conductivity, and influences charge transfer interactions. The charge density analysis reveals substantial interactions between B dopants and surrounding carbon atoms. This work not only enhances our understanding of the material’s electronic properties, but also highlights the importance of charge density analysis for characterizing charge transfer mechanisms and their implications in the 3C-SiC semiconductors.展开更多
基金Founded by the Science and Technology Foundation of AnhuiProvince (No.010301E2)
文摘Fe^3＋ -doped nanometer TiO2 photocatalysts were prepared by sol-gel technique. TiO2 powders with different Fe^3＋ / Ti^4 ＋ molar ratios ranging from 0. 05% to 25% were synthesized by calcinating the gels in the temperature range of 200-600 ℃ . The effects of the content of iron ions and calcination temperature on the physical properties of the powders and their photocatalytic activities were examined by the photodecorapositon of methyl orange in sunlight. The results show that Fe dopant can decrease the temperature of nanatase-ratile transformation. The ideal photocatalytic property was achieved when the sample with an Fe^3＋ / Ti^4＋ ratio of 20 at% was calcined at about 300 ℃ for an hour, which is superior to that of commercial Degussa P-25. The optimum microstructure of the Fe-doped TiO2 for a high photocatalytic activity in sunlight is consisted of nanatase and ratile.
基金The authors are grateful for the financial support by the
文摘Peroxidase plays an important role in living systems;however,its storage difficulty and easy inactivation have limited its applications in complex environments.To address these problems,herein,we proposed a method to synthesize peroxidase mimics by amination,carbonization,and Fe^(3+)-doping of industrial alkali lignin.The Fe^(3+)-doped lignin-based peroxidase mimic(Fe-LPM),with active centers of coordination between Fe^(3+)and N atoms,showed higher tolerance to pH value and temperature than natural peroxidase.Using Fe-LPM,10-100 mmol/L of H_(2)O_(2) and glucose could be colorimetrically detected with the lowest detection limits of 80μmol/L and 1.5 mmol/L and visual detection limits of 1.0 mmol/L and 10 mmol/L,respectively.The Fe-LPM maintained peroxidase-like activity after 10 cycles and could even be used for H_(2)O_(2) detection in practical samples.This work not only provides a new approach to synthesize peroxidase mimics using biomass materials but also promotes the high-value utilization of lignin.
文摘The development of an efficient artificial H_(2)O_(2) photosynthesis system is a challenging work using H_(2)O and O_(2) as starting materials.Herein,3D In_(2.77)S_(4) nanoflower precursor was in-situ deposited on K^(+)-doped g-C_(3)N_(4)(KCN)nanosheets using a solvothermal method,then In_(2.77)S_(4)/KCN(IS/KCN)het-erojunction with an intimate interface was obtained after a calcination process.The investigation shows that the photocatalytic H_(2)O_(2) production rate of 50IS/KCN can reach up to 1.36 mmol g^(-1)h^(-1)without any sacrificial reagents under visible light irradiation,which is 9.2 times and 4.1 times higher than that of KCN and In_(2.77)S_(4)/respectively.The enhanced activity of the above composite can be mainly attributed to the S-scheme charge transfer route between KCN and In_(2.77)S_(4) according to density functional theory calculations,electron paramagnetic resonance and free radical capture tests,leading to an expanded light response range and rapid charge separation at their interface,as well as preserving the active electrons and holes for H_(2)O_(2) production.Besides,the unique 3D nanostructure and surface hydrophobicity of IS/KCN facilitate the diffusion and transportation of O_(2) around the active centers,the energy barriers of O_(2) protonation and H_(2)O_(2) desorption steps are ef-fectively reduced over the composite.In addition,this system also exhibits excellent light harvesting ability and stability.This work provides a potential strategy to explore a sustainable H_(2)O_(2) photo-synthesis pathway through the design of heterojunctions with intimate interfaces and desired reac-tion thermodynamics and kinetics.
文摘This study delves into the charge transfer mechanism of boron (B)-doped 3C-SiC through first-principles investigations. We explore the effects of B doping on the electronic properties of 3C-SiC, focusing on a 12.5% impurity concentration. Our comprehensive analysis encompasses structural properties, electronic band structures, and charge density distributions. The optimized lattice constant and band gap energy of 3C-SiC were found to be 4.373 Å and 1.36 eV respectively, which is in agreement with previous research (Bui, 2012;Muchiri et al., 2018). Our results show that B doping narrows the band gap, enhances electrical conductivity, and influences charge transfer interactions. The charge density analysis reveals substantial interactions between B dopants and surrounding carbon atoms. This work not only enhances our understanding of the material’s electronic properties, but also highlights the importance of charge density analysis for characterizing charge transfer mechanisms and their implications in the 3C-SiC semiconductors.
