A new polymer named polyferrocarbosilane(PFCS) was prepared from polydimethylsilane and ferrocene. The spinnability of this polymer can be tailored by controlling the content of ferrocene in the polymer. The prepared ...A new polymer named polyferrocarbosilane(PFCS) was prepared from polydimethylsilane and ferrocene. The spinnability of this polymer can be tailored by controlling the content of ferrocene in the polymer. The prepared polymer was spun into a continuous polymer fiber that was subsequently cured in air and heat-treated finally in N2 up to 1 350 ℃ for conversion into Si-Fe-C-O fibers. The resulted Si-Fe-C-O fibers display low specific resistance and magnetic property due to the existence of Fe, which also reduces the specific resistance significantly to 10-2Ω·cm at room temperature when the amount of ferrocene in feed is as low as 3.0% (mass fraction). The resulted Si-Fe-C-O fibers, with C/Si molar ratio of about 1.3 and the maximum Fe content of about 2.0% (mole fraction), are composed of β-SiC and small amount of Fe3Si-like crystalline and have an average tensile strength of about 2.0 GPa.展开更多
The design of efficient iron-based catalysts remains a great challenge for selective cyclohexane oxidation to cyclohexanone under mild conditions.Because of the complex distribution of iron location on the support,the...The design of efficient iron-based catalysts remains a great challenge for selective cyclohexane oxidation to cyclohexanone under mild conditions.Because of the complex distribution of iron location on the support,the selectivity is always low.Here,we report a general strategy to selectively deposit highly-dispersed FeO_(x) into the micropore of ZSM-5 by atomic layer deposition(ALD).The framework of ZSM-5 and the Bronsted acid sites are intact during ALD,and the Fe species are selectively deposited onto the defect and Lewis acid sites of ZSM-5.Besides,more Fe–O–Si bonds are formed over FeO_(x)/ZSM-5 with a low loading of Fe,while FeO_(x) nanoparticles are generated at high Fe loading.They cannot be realized by the traditional solution method.The obtained FeO_(x)/ZSM-5 catalysts perform high selectivity of cyclohexanone(92%–97%),and ALD cycle numbers of FeO_(x) control the activity.Compared with the Fe nanoparticles,the Fe–O–Si species performs higher turnover frequency and stability in the oxidation reaction.展开更多
文摘A new polymer named polyferrocarbosilane(PFCS) was prepared from polydimethylsilane and ferrocene. The spinnability of this polymer can be tailored by controlling the content of ferrocene in the polymer. The prepared polymer was spun into a continuous polymer fiber that was subsequently cured in air and heat-treated finally in N2 up to 1 350 ℃ for conversion into Si-Fe-C-O fibers. The resulted Si-Fe-C-O fibers display low specific resistance and magnetic property due to the existence of Fe, which also reduces the specific resistance significantly to 10-2Ω·cm at room temperature when the amount of ferrocene in feed is as low as 3.0% (mass fraction). The resulted Si-Fe-C-O fibers, with C/Si molar ratio of about 1.3 and the maximum Fe content of about 2.0% (mole fraction), are composed of β-SiC and small amount of Fe3Si-like crystalline and have an average tensile strength of about 2.0 GPa.
基金supported by the National Natural Science Foundation of China(21872160,U1832208)the National Science Fund for Distinguished Young Scholars(21825204)+2 种基金the National Key R&D Program of China(2017YFA0700101 and 2018YFB1501602)the Youth Innovation Promotion Association CAS(2017204)Natural Science Foundation of Shanxi Province(201901D211591)。
文摘The design of efficient iron-based catalysts remains a great challenge for selective cyclohexane oxidation to cyclohexanone under mild conditions.Because of the complex distribution of iron location on the support,the selectivity is always low.Here,we report a general strategy to selectively deposit highly-dispersed FeO_(x) into the micropore of ZSM-5 by atomic layer deposition(ALD).The framework of ZSM-5 and the Bronsted acid sites are intact during ALD,and the Fe species are selectively deposited onto the defect and Lewis acid sites of ZSM-5.Besides,more Fe–O–Si bonds are formed over FeO_(x)/ZSM-5 with a low loading of Fe,while FeO_(x) nanoparticles are generated at high Fe loading.They cannot be realized by the traditional solution method.The obtained FeO_(x)/ZSM-5 catalysts perform high selectivity of cyclohexanone(92%–97%),and ALD cycle numbers of FeO_(x) control the activity.Compared with the Fe nanoparticles,the Fe–O–Si species performs higher turnover frequency and stability in the oxidation reaction.
