建立了微波消解-电感耦合等离子体发射光谱法同时测定哈氏C-276合金中Cr、Fe、Mo、W元素含量的分析方法.采用10 m L HCl-HNO3-HF(体积比为10:1:1)混合酸溶解试样.研究了合金不同溶解方式、元素谱线的选择、背景校正等试验条件,并对仪器...建立了微波消解-电感耦合等离子体发射光谱法同时测定哈氏C-276合金中Cr、Fe、Mo、W元素含量的分析方法.采用10 m L HCl-HNO3-HF(体积比为10:1:1)混合酸溶解试样.研究了合金不同溶解方式、元素谱线的选择、背景校正等试验条件,并对仪器分析参数进行了优化,确定了最佳的试验条件,各元素分析谱线依次为Cr2 67.716 nm、Fe 238.204 nm、Mo 202.031 nm、W 209.712 nm,建立的校准曲线各元素相关系数均在0.999 5以上.实际样品分析中,加标回收率为97.8%~102.7%,重复测定结果的相对标准偏差小于1.64%(n=6),试验测定结果与镍基标准样品标准值做对照,结果表明方法准确、快速,能够满足日常生产的检测要求.展开更多
After different heat treatment processes, the metal compound, the microstructure and the hardness of the C-Cr-W- Mo-V-RE Fe-based hardfacing layers are investigated by means of metallographic microscope, X-ray diffrac...After different heat treatment processes, the metal compound, the microstructure and the hardness of the C-Cr-W- Mo-V-RE Fe-based hardfacing layers are investigated by means of metallographic microscope, X-ray diffraction （ XRD ）, energy dispersive spectrum（ EDS ）, transmission electron microscope（TEM） and hardness tester. The results show that the hardfacing layers have higher tempering stability and secondary hardening property. After quenching at 820 ℃ ,the hardness value（ HRC37 ） and the microstructure of the layers are similar to that normalized at 820 - 1 000 ℃. The tempering stability and the hardness increases with increasing quench temperature, which is attributed to the amount of the alloy element in the matrix. These results are very helpful for improving the mechanical properties of the hardfacing layers.展开更多
文摘After different heat treatment processes, the metal compound, the microstructure and the hardness of the C-Cr-W- Mo-V-RE Fe-based hardfacing layers are investigated by means of metallographic microscope, X-ray diffraction （ XRD ）, energy dispersive spectrum（ EDS ）, transmission electron microscope（TEM） and hardness tester. The results show that the hardfacing layers have higher tempering stability and secondary hardening property. After quenching at 820 ℃ ,the hardness value（ HRC37 ） and the microstructure of the layers are similar to that normalized at 820 - 1 000 ℃. The tempering stability and the hardness increases with increasing quench temperature, which is attributed to the amount of the alloy element in the matrix. These results are very helpful for improving the mechanical properties of the hardfacing layers.
