The effects of aging temperature on shape memory effect, mechanical properties and microstruc-ture of Fe-14Mn-5Si-8Cr-4Ni-0.2C shape memory alloy have been studied. The results showed that the second phase particles r...The effects of aging temperature on shape memory effect, mechanical properties and microstruc-ture of Fe-14Mn-5Si-8Cr-4Ni-0.2C shape memory alloy have been studied. The results showed that the second phase particles rich in chromium, manganese and silicon precipitate during aging, and thereby increase the hardness and strength of the alloy. The shape recovery ratio can be remarkably improved by aging and a maximum value can be obtained at 1223 K, which is 68% higher than that of the specimen in solid solution state. When the aging temperature is below 1223 K, the amount of second phase particles increases as the aging temperature increases. The size of austenite grain increases with increasing aging temperature. When the temperature is over 1223 K, the second phase particles can not precipitate. The lack of second phase particles and the increase of grain size make the hardness and shape recovery ratio drastically decrease, when the temperature is over 1223 K.展开更多
The infuences of cold-rolling deformation and annealing on the damping capacity of Fe-19Mn-8Cr alloy were investigated.It was observed that the cold-rolled Fe-19Mn-8Cr alloy with a reduction of 10%showed the relativel...The infuences of cold-rolling deformation and annealing on the damping capacity of Fe-19Mn-8Cr alloy were investigated.It was observed that the cold-rolled Fe-19Mn-8Cr alloy with a reduction of 10%showed the relatively excellent damping capacity because of the relatively moreε-martensite and lower dislocation density,and the reduction of slopes of diferent damping curves increased along with increasing the cold-rolling reduction.Besides,the subsequent annealing process can further enhance the damping capacity.After 70%cold-rolling deformation,the austenite grain would grow up with the increase in the annealing temperature,which resulted in a signifcant change in the content and morphology ofε-martensite infuencing the damping capacity of the experimental steel.The damping capacity was optimum when annealed at 800°C for 30 min,displaying that the size ofε-martensite has a vital infuence on the damping capacity of the experimental alloy.This study may enrich the fundamental knowledge about how to ameliorate the damping capacity of Fe-Mn-Cr damping steels.展开更多
文摘The effects of aging temperature on shape memory effect, mechanical properties and microstruc-ture of Fe-14Mn-5Si-8Cr-4Ni-0.2C shape memory alloy have been studied. The results showed that the second phase particles rich in chromium, manganese and silicon precipitate during aging, and thereby increase the hardness and strength of the alloy. The shape recovery ratio can be remarkably improved by aging and a maximum value can be obtained at 1223 K, which is 68% higher than that of the specimen in solid solution state. When the aging temperature is below 1223 K, the amount of second phase particles increases as the aging temperature increases. The size of austenite grain increases with increasing aging temperature. When the temperature is over 1223 K, the second phase particles can not precipitate. The lack of second phase particles and the increase of grain size make the hardness and shape recovery ratio drastically decrease, when the temperature is over 1223 K.
基金This work was financially supported by the National Key R&D Program of China(Grant No.2016YFB0300303)。
文摘The infuences of cold-rolling deformation and annealing on the damping capacity of Fe-19Mn-8Cr alloy were investigated.It was observed that the cold-rolled Fe-19Mn-8Cr alloy with a reduction of 10%showed the relatively excellent damping capacity because of the relatively moreε-martensite and lower dislocation density,and the reduction of slopes of diferent damping curves increased along with increasing the cold-rolling reduction.Besides,the subsequent annealing process can further enhance the damping capacity.After 70%cold-rolling deformation,the austenite grain would grow up with the increase in the annealing temperature,which resulted in a signifcant change in the content and morphology ofε-martensite infuencing the damping capacity of the experimental steel.The damping capacity was optimum when annealed at 800°C for 30 min,displaying that the size ofε-martensite has a vital infuence on the damping capacity of the experimental alloy.This study may enrich the fundamental knowledge about how to ameliorate the damping capacity of Fe-Mn-Cr damping steels.
