Fe-doped TiO2 was prepared by the sol gel method and characterized by X-ray diffraction. All the Fe-doped TiO2 were composed of an anatase crystal form. The activity of the Fe-doped TiO2 for the degradation of the ges...Fe-doped TiO2 was prepared by the sol gel method and characterized by X-ray diffraction. All the Fe-doped TiO2 were composed of an anatase crystal form. The activity of the Fe-doped TiO2 for the degradation of the gesaprim commercial herbicide (which contains atrazine as active compound and formulating agents) was studied by varying the iron content during UV (15 W), visible light and solar irradiations. The visible light came from commercial saving energy lamps (13, 15 and 20 Watts). The gesaprim degradation rate depended on the iron content in the photo catalyst. The Fe-doped TiO2 (0.5% by weight of TiO2) showed higher TOC removal under visible light and was more active than the undoped TiO2 photo catalyst under the light irradiation sources tested. Over 90% of chemical oxygen demand abatement was achieved with both UV and visible light but less time was required to decrease the chemical oxygen demand content by using the catalyst doped with iron at 0.5% under visible light. It was observed that the degradation of gesaprim increased by increasing the iron content in the catalyst under visible light.展开更多
This study used a Polyindole in combination with TiO2 nanocatalyst as an efficient heterogeneous catalyst to carry out a multi-component Hantzsch reaction involving different aromatic aldehydes with methyl acetoacetat...This study used a Polyindole in combination with TiO2 nanocatalyst as an efficient heterogeneous catalyst to carry out a multi-component Hantzsch reaction involving different aromatic aldehydes with methyl acetoacetate, and aqueous ammonium to create 1,4-dihydropyridine derivatives under solvent free condition at ambient temperature. A broad range of aldehydes and methyl acetoacetates, ranging from heteroaromatic to polyaromatic one, with high level of functional group tolerance can be used to provide the desired products possessing relevant medicinal moiety in high yields. This technology has prospective advantages over current protocols, including the utilization of a cheap, stable, recyclable, and safe catalyst, quicker reaction times with higher yields and simple product isolation.展开更多
The simulation by the Monte Carlo method executed by the software PyPENELOPE proved effective to specify the particle propagation characteristics by calculating the absorption fractions, backscattering and transmissio...The simulation by the Monte Carlo method executed by the software PyPENELOPE proved effective to specify the particle propagation characteristics by calculating the absorption fractions, backscattering and transmission of electrons and secondary photons under the incidence of 0.5 to 20 KeV range of primary electrons. More than 99.9% of the primary electrons were transmitted in the 125 nm thick MgO/TiO<sub>2</sub> material at 20 KeV. This occurred because several interactions took place in the transmitted primary irradiation such as characteristic, fluorescence, and bremsstrahlung produced when of the occupation of the KL3, KL2, KM3, and KM2 shell and sub-shell of titanium and magnesium which are the elements with a high atomic number in the material. The transmission particle characteristic of this material is therefore an indicator capable of improving the electrical performance and properties of the sensor.展开更多
This study focused on the development and characterization of TiO<sub>2</sub>-PES composite fibers with varying TiO<sub>2</sub> loading amounts using a phase inversion process. The resulting co...This study focused on the development and characterization of TiO<sub>2</sub>-PES composite fibers with varying TiO<sub>2</sub> loading amounts using a phase inversion process. The resulting composite fibers exhibited a sponge-like structure with embedded TiO<sub>2</sub> nanoparticles within a polymer matrix. Their photocatalytic performance for ammonia removal from aqueous solutions under UV-A light exposure was thoroughly investigated. The findings revealed that PeTi8 composite fibers displayed superior adsorption capacity compared to other samples. Moreover, the study explored the impact of pH, light intensity, and catalyst dosage on the photocatalytic degradation of ammonia. Adsorption equilibrium isotherms closely followed the Langmuir model, with the results indicating a correlation between qm values of 2.49 mg/g and the porous structure of the adsorbents. The research underscored the efficacy of TiO<sub>2</sub> composite fibers in the photocatalytic removal of aqueous under UV-A light. Notably, increasing the distance between the photocatalyst and the light source resulted in de-creased hydroxyl radical concentration, influencing photocatalytic efficiency. These findings contribute to our understanding of TiO<sub>2</sub> composite fibers as promising photocatalysts for ammonia removal in water treatment applications.展开更多
In this paper, Fe-doped TiO_2 photocatalyst supported on hollow glass microbeads(Fe-TiO_2 /beads)is prepared by dip-coating method, which uses hollow glass microbeads as the carriers and tetrabutylorthotitanate [Ti(O...In this paper, Fe-doped TiO_2 photocatalyst supported on hollow glass microbeads(Fe-TiO_2 /beads)is prepared by dip-coating method, which uses hollow glass microbeads as the carriers and tetrabutylorthotitanate [Ti(OC_4H_9)_4] as the raw material. The phase structure, ingredient, morphologies, particle size and shell thickness of the products are characterized by X-ray powder diffraction(XRD), energy-dispersive spectroscopy(EDS) and field emission scanning electron microscope(FESEM). The feasibility of photocatylic degradation of Rhodamine B(Rh B) under illumination of UV-vis light is studied. The results show that the core-shell structure catalyst is composed of Fe-doped anatase TiO_2 and hollow glass microbeads, and the catalytic activity of the TiO_2 is markedly enhanced by Fe ion doping. The optimum concentration of Fe ion is 0.1%(molecular fraction) in the precursor and the photocatalytic activity can be increased to 98% compared with that of the undoped one. The presence of ferrum elements neither influences the transformation of anatase to rutile, nor creates new crystal phases. The possible mechanism of photocatalytic oxidation is also discussed.展开更多
Fe-doped In2O3 dilute magnetic semiconducting nanowires are fabricated on A u-deposited Si substrates by the chemical vapor deposition technique. It is confirmed by energy dispersive x-ray spectroscopy (EDS), x-ray ...Fe-doped In2O3 dilute magnetic semiconducting nanowires are fabricated on A u-deposited Si substrates by the chemical vapor deposition technique. It is confirmed by energy dispersive x-ray spectroscopy (EDS), x-ray photoelectron spectroscopy (XPS) and Raman spectroscopy that Fe has been successfully doped into lattices of In2O3 nanowires. The EDS measurements reveal a large amount of oxygen vacancies existing in the Fe-doped In2O3 nanowires. The Fe dopant exists as a mixture of Fe2+ and Fe3+, as revealed by the XPS. The origin of room-temperature ferromagnetism in Fe-doped In2O3 nanowires is explained by the bound magnetic polaron model.展开更多
The structural evolution of Fe-doped TiO2 by high-energy ball milling was investigated by X-ray diffraction and Mǒssbauer spectroscopy, The results show that the original anatase-TiO2 transforms to srilankite-type an...The structural evolution of Fe-doped TiO2 by high-energy ball milling was investigated by X-ray diffraction and Mǒssbauer spectroscopy, The results show that the original anatase-TiO2 transforms to srilankite-type and rutile-type during ball milling. Iron atoms are preferable to dissolve in rutile-TiO2 and there are two relative doublets appearing in Mǒssbauer spectra. A doublet is found in the condition of Fe atoms dissolved in srilankite TiO2 lattice. Mǒssbauer spectra show that the composition distribution is nonuniform in TiO2 during the mechanical alloying with Fe atoms rich at the interface or surface of TiO2 crystalline.展开更多
文摘Fe-doped TiO2 was prepared by the sol gel method and characterized by X-ray diffraction. All the Fe-doped TiO2 were composed of an anatase crystal form. The activity of the Fe-doped TiO2 for the degradation of the gesaprim commercial herbicide (which contains atrazine as active compound and formulating agents) was studied by varying the iron content during UV (15 W), visible light and solar irradiations. The visible light came from commercial saving energy lamps (13, 15 and 20 Watts). The gesaprim degradation rate depended on the iron content in the photo catalyst. The Fe-doped TiO2 (0.5% by weight of TiO2) showed higher TOC removal under visible light and was more active than the undoped TiO2 photo catalyst under the light irradiation sources tested. Over 90% of chemical oxygen demand abatement was achieved with both UV and visible light but less time was required to decrease the chemical oxygen demand content by using the catalyst doped with iron at 0.5% under visible light. It was observed that the degradation of gesaprim increased by increasing the iron content in the catalyst under visible light.
文摘This study used a Polyindole in combination with TiO2 nanocatalyst as an efficient heterogeneous catalyst to carry out a multi-component Hantzsch reaction involving different aromatic aldehydes with methyl acetoacetate, and aqueous ammonium to create 1,4-dihydropyridine derivatives under solvent free condition at ambient temperature. A broad range of aldehydes and methyl acetoacetates, ranging from heteroaromatic to polyaromatic one, with high level of functional group tolerance can be used to provide the desired products possessing relevant medicinal moiety in high yields. This technology has prospective advantages over current protocols, including the utilization of a cheap, stable, recyclable, and safe catalyst, quicker reaction times with higher yields and simple product isolation.
文摘The simulation by the Monte Carlo method executed by the software PyPENELOPE proved effective to specify the particle propagation characteristics by calculating the absorption fractions, backscattering and transmission of electrons and secondary photons under the incidence of 0.5 to 20 KeV range of primary electrons. More than 99.9% of the primary electrons were transmitted in the 125 nm thick MgO/TiO<sub>2</sub> material at 20 KeV. This occurred because several interactions took place in the transmitted primary irradiation such as characteristic, fluorescence, and bremsstrahlung produced when of the occupation of the KL3, KL2, KM3, and KM2 shell and sub-shell of titanium and magnesium which are the elements with a high atomic number in the material. The transmission particle characteristic of this material is therefore an indicator capable of improving the electrical performance and properties of the sensor.
文摘This study focused on the development and characterization of TiO<sub>2</sub>-PES composite fibers with varying TiO<sub>2</sub> loading amounts using a phase inversion process. The resulting composite fibers exhibited a sponge-like structure with embedded TiO<sub>2</sub> nanoparticles within a polymer matrix. Their photocatalytic performance for ammonia removal from aqueous solutions under UV-A light exposure was thoroughly investigated. The findings revealed that PeTi8 composite fibers displayed superior adsorption capacity compared to other samples. Moreover, the study explored the impact of pH, light intensity, and catalyst dosage on the photocatalytic degradation of ammonia. Adsorption equilibrium isotherms closely followed the Langmuir model, with the results indicating a correlation between qm values of 2.49 mg/g and the porous structure of the adsorbents. The research underscored the efficacy of TiO<sub>2</sub> composite fibers in the photocatalytic removal of aqueous under UV-A light. Notably, increasing the distance between the photocatalyst and the light source resulted in de-creased hydroxyl radical concentration, influencing photocatalytic efficiency. These findings contribute to our understanding of TiO<sub>2</sub> composite fibers as promising photocatalysts for ammonia removal in water treatment applications.
文摘In this paper, Fe-doped TiO_2 photocatalyst supported on hollow glass microbeads(Fe-TiO_2 /beads)is prepared by dip-coating method, which uses hollow glass microbeads as the carriers and tetrabutylorthotitanate [Ti(OC_4H_9)_4] as the raw material. The phase structure, ingredient, morphologies, particle size and shell thickness of the products are characterized by X-ray powder diffraction(XRD), energy-dispersive spectroscopy(EDS) and field emission scanning electron microscope(FESEM). The feasibility of photocatylic degradation of Rhodamine B(Rh B) under illumination of UV-vis light is studied. The results show that the core-shell structure catalyst is composed of Fe-doped anatase TiO_2 and hollow glass microbeads, and the catalytic activity of the TiO_2 is markedly enhanced by Fe ion doping. The optimum concentration of Fe ion is 0.1%(molecular fraction) in the precursor and the photocatalytic activity can be increased to 98% compared with that of the undoped one. The presence of ferrum elements neither influences the transformation of anatase to rutile, nor creates new crystal phases. The possible mechanism of photocatalytic oxidation is also discussed.
基金Supported by the National Basic Research Program of China under Grant Nos 2014CB921101,2014CB921103 and2013CB922103the National Natural Science Foundation of China under Grant Nos 11274003,61176088 and 61274102+1 种基金the Program for the New Century Excellent Talents in University under Grant No NCET-11-0240the PAPD Project,and the Fundamental Research Funds for the Central Universities
文摘Fe-doped In2O3 dilute magnetic semiconducting nanowires are fabricated on A u-deposited Si substrates by the chemical vapor deposition technique. It is confirmed by energy dispersive x-ray spectroscopy (EDS), x-ray photoelectron spectroscopy (XPS) and Raman spectroscopy that Fe has been successfully doped into lattices of In2O3 nanowires. The EDS measurements reveal a large amount of oxygen vacancies existing in the Fe-doped In2O3 nanowires. The Fe dopant exists as a mixture of Fe2+ and Fe3+, as revealed by the XPS. The origin of room-temperature ferromagnetism in Fe-doped In2O3 nanowires is explained by the bound magnetic polaron model.
文摘The structural evolution of Fe-doped TiO2 by high-energy ball milling was investigated by X-ray diffraction and Mǒssbauer spectroscopy, The results show that the original anatase-TiO2 transforms to srilankite-type and rutile-type during ball milling. Iron atoms are preferable to dissolve in rutile-TiO2 and there are two relative doublets appearing in Mǒssbauer spectra. A doublet is found in the condition of Fe atoms dissolved in srilankite TiO2 lattice. Mǒssbauer spectra show that the composition distribution is nonuniform in TiO2 during the mechanical alloying with Fe atoms rich at the interface or surface of TiO2 crystalline.