The development of efficient single-atom catalysts(SACs) for the oxygen reduction reaction(ORR)remains a formidable challenge,primarily due to the symmetric charge distribution of metal singleatom sites(M-N_(4)).To ad...The development of efficient single-atom catalysts(SACs) for the oxygen reduction reaction(ORR)remains a formidable challenge,primarily due to the symmetric charge distribution of metal singleatom sites(M-N_(4)).To address such issue,herein,Fe-N_(x) sites coupled synergistic catalysts fabrication strategy is presented to break the uniform electronic distribution,thus enhancing the intrinsic catalytic activity.Precisely,atomically dispersed Fe-N_(x) sites supported on N/S-doped mesoporous carbon(NSC)coupled with FeS@C core-shell nanoparticles(FAS-NSC@950) is synthesized by a facile hydrothermal reaction and subsequent pyrolysis.Due to the presence of an in situ-grown conductive graphitic layer(shell),the FeS nanoparticles(core) effectively adjust the electronic structure of single-atom Fe sites and facilitate the ORR kinetics via short/long-range coupling interactions.Consequently,FAS-NSC@950displays a more positive half-wave potential(E_(1/2)) of 0.871 V with a significantly boosted ORR kinetics(Tafel slope=52.2 mV dec^(-1)),outpacing the commercial Pt/C(E_(1/2)=0.84 V and Tafel slope=54.6 mV dec^(-1)).As a bifunctional electrocatalyst,it displays a smaller bifunctional activity parameter(ΔE) of 0.673 V,surpassing the Pt/C-RuO_(2) combination(ΔE=0.724 V).Besides,the FAS-NSC@950-based zincair battery(ZAB) displays superior power density,specific capacity,and long-term cycling performance to the Pt/C-Ir/C-based ZAB.This work significantly contributes to the field by offering a promising strategy to enhance the catalytic activity of SACs for ORR,with potential implications for energy conversion and storage technologies.展开更多
Binder-free bifunctional electrocatalysts are attractive for rechargeable Zn-air batteries(ZABs)in gridscale energy storage and flexible electronics,but suffering from the sluggish mass transport and inadequate cataly...Binder-free bifunctional electrocatalysts are attractive for rechargeable Zn-air batteries(ZABs)in gridscale energy storage and flexible electronics,but suffering from the sluggish mass transport and inadequate catalytic capability.Herein,we propose a scalable approach of in-situ engineering highly exposed Fe-N_(4)/Cxsites on the N,S-doped porous carbon nanofiber membrane as a binder-free air electrode catalyst for ZABs.ZnS nanospheres are firstly used as integrated structure-directing agents to facilitate the electronic modulation of Fe-N_(4)/Cxsites by S doping and construct the hierarchical macro/meso/micropores at high temperature.Neither additional step for removal of ZnS nanospheres nor doping process is required,significantly simplifying the pore formation process and improving the S doping efficiency.Benefiting from the enhanced intrinsic activity of high-density Fe-N_(4)/Cxsites(23.53μmol g^(-1))and the optimized mass transport of carbon nanofibers,as-synthesized electrocatalyst shows a positive half-wave potential of 0.89 V for oxygen reduction reaction and a small overpotential of 0.47 V at 10 m A cm^(-2)for oxygen evolution reaction.When used as the air cathode catalyst for ZABs,it delivers a high specific capacity of 699 m Ah g^(-1)at 5 m A cm^(-2),a large peak power density of 228 m W cm^(-2)and a prolonged cycling over 1000 h.At 10 m A cm^(-2),a robust structure with atomically dispersed Fe is also remained after cycling for 420 h.Due to the flexible properties of the electrocatalyst,as-assembled quasi-solid-state ZAB shows stable cycling over 90 h at alternately flat/bent states,demonstrating great prospects in flexible electronic device applications.展开更多
TiO_(2)-supported V_(2)O_(5)catalysts are commonly used in NO_(x)reduction with ammonia due to their robust catalytic performance.Over these catalysts,it is generally considered that the active species are mainly deri...TiO_(2)-supported V_(2)O_(5)catalysts are commonly used in NO_(x)reduction with ammonia due to their robust catalytic performance.Over these catalysts,it is generally considered that the active species are mainly derived from the vanadia species rather than the intrinsic structure of V-O-Ti entities,namely the interface sites.To reveal the role of V-O-Ti entities in NH_(3)-SCR,herein,we prepared TiO_(2)/V_(2)O_(5)catalysts and demonstrated that V-O-Ti entities were more active for NO_(x)reduction under wet conditions than the V sites(V=O)working alone.On the V-O-Ti entities,kinetic measurements and first principles calculations revealed that NH_(3)activation exhibited a much lower energy barrier than that on V=O sites.Under wet conditions,the V-O-Ti interface significantly inhibited the transformation of V=O to V-OH sites thus benefiting NH_(3)activation.Under wet conditions,meanwhile,the migration of NH_(4)^(+)from Ti site neighboring the V-O-Ti interface to Ti site of the V-O-Ti interface was exothermic;thus,V-O-Ti entities together with neighboring Ti sites could serve as channels linking NH_(3)pool and active centers for activation of NH_(4)^(+).This finding reveals that the V-O-Ti interface sites on V-based catalysts play a crucial role in NO_(x)removal under realistic conditions,providing a new perspective on NH_(3)-SCR mechanism.展开更多
Efficient bifunctional oxygen electrocatalysts for ORR and OER are fundamental to the development of high performance metal-air batteries.Herein,a facile cost-efficient two-step pyrolysis strategy for the fabrication ...Efficient bifunctional oxygen electrocatalysts for ORR and OER are fundamental to the development of high performance metal-air batteries.Herein,a facile cost-efficient two-step pyrolysis strategy for the fabrication of a bifunctional oxygen electrocatalyst has been proposed.The efficient non-preciousmetal-based electrocatalyst,Fe/Fe_(3)C@Fe-N_(x)-C consists of highly curved onion-like carbon shells that encapsulate Fe/Fe_(3)C nanoparticles,distributed on an extensively porous graphitic carbon aerogel.The obtained Fe/Fe_(3)C@Fe-N_(x)-C aerogel exhibited superb electrochemical activity,excellent durability,and high methanol tolerance.The experimental results indicated that the assembly of onion-like carbon shells with encapsulated Fe/Fe_(3)C yielded highly curved carbon surfaces with abundant Fe-Nxactive sites,a porous structure,and enhanced electrocatalytic activity towards ORR and OER,hence displaying promising potential for application as an air cathode in rechargeable Zn-air batteries.The constructed Zn-air battery possessed an exceptional peak power density of~147 mW cm^(-2),outstanding cycling stability(200 cycles,1 h per cycle),and a small voltage gap of 0.87 V.This study offers valuable insights regarding the construction of low-cost and highly active bifunctional oxygen electrocatalysts for efficient air batteries.展开更多
The real-time monitoring of environmental radiation dose for nuclear fa-cilities is an important part of safety, in order to guarantee the accuracy of the monitoring results regular calibration is necessary. Around nu...The real-time monitoring of environmental radiation dose for nuclear fa-cilities is an important part of safety, in order to guarantee the accuracy of the monitoring results regular calibration is necessary. Around nuclear facilities there are so many environmental dosimeters installed dispers-edly, because of its huge quantity, widely distributed, and in real-time monitoring state;it will cost lots of manpower and finance if it were tak-en to calibrate on standard laboratory;what’s more it will make the en-vironment out of control. To solve the problem of the measurement ac-curacy of the stationary gamma radiation dosimeter, an on-site calibra-tion method is proposed. The radioactive source is X-ray spectrum, and the dose reference instrument which has been calibrated by the national standard laboratory is a high pressure ionization. On-site calibration is divided into two parts;firstly the energy response experiment of dosim-eter for high and low energy is done in the laboratory, and the energy response curve is obtained combining with Monte Carlo simulation;sec-ondly experiment is carried out in the field of the measuring dosimeter, and the substitution method to calibrate the dosimeter is used;finally the calibration coefficient is gotten through energy curve correction. In order to verify the accuracy of on-site calibration method, the calibrated dosimeter is test in the standard laboratory and the error is 3.4%. The re-sult shows that the on-site calibration method using X-ray is feasible, and it can improves the accuracy of the measurement results of the stationary γ-ray instrument;what’s more important is that it has great reference value for the radiation safety management and radiation environment evaluation.展开更多
基金financially supported by the National Natural Science Foundation of China(21773024)the Natural Science Foundation of Sichuan Province of China(2023NSFC0084)the China Postdoctoral Science Foundation(2019M663469)。
文摘The development of efficient single-atom catalysts(SACs) for the oxygen reduction reaction(ORR)remains a formidable challenge,primarily due to the symmetric charge distribution of metal singleatom sites(M-N_(4)).To address such issue,herein,Fe-N_(x) sites coupled synergistic catalysts fabrication strategy is presented to break the uniform electronic distribution,thus enhancing the intrinsic catalytic activity.Precisely,atomically dispersed Fe-N_(x) sites supported on N/S-doped mesoporous carbon(NSC)coupled with FeS@C core-shell nanoparticles(FAS-NSC@950) is synthesized by a facile hydrothermal reaction and subsequent pyrolysis.Due to the presence of an in situ-grown conductive graphitic layer(shell),the FeS nanoparticles(core) effectively adjust the electronic structure of single-atom Fe sites and facilitate the ORR kinetics via short/long-range coupling interactions.Consequently,FAS-NSC@950displays a more positive half-wave potential(E_(1/2)) of 0.871 V with a significantly boosted ORR kinetics(Tafel slope=52.2 mV dec^(-1)),outpacing the commercial Pt/C(E_(1/2)=0.84 V and Tafel slope=54.6 mV dec^(-1)).As a bifunctional electrocatalyst,it displays a smaller bifunctional activity parameter(ΔE) of 0.673 V,surpassing the Pt/C-RuO_(2) combination(ΔE=0.724 V).Besides,the FAS-NSC@950-based zincair battery(ZAB) displays superior power density,specific capacity,and long-term cycling performance to the Pt/C-Ir/C-based ZAB.This work significantly contributes to the field by offering a promising strategy to enhance the catalytic activity of SACs for ORR,with potential implications for energy conversion and storage technologies.
基金the financial support from the National Natural Science Foundation of China(51972191,52172047)the National Key Research and Development Program of China(2021YFA1200800)。
文摘Binder-free bifunctional electrocatalysts are attractive for rechargeable Zn-air batteries(ZABs)in gridscale energy storage and flexible electronics,but suffering from the sluggish mass transport and inadequate catalytic capability.Herein,we propose a scalable approach of in-situ engineering highly exposed Fe-N_(4)/Cxsites on the N,S-doped porous carbon nanofiber membrane as a binder-free air electrode catalyst for ZABs.ZnS nanospheres are firstly used as integrated structure-directing agents to facilitate the electronic modulation of Fe-N_(4)/Cxsites by S doping and construct the hierarchical macro/meso/micropores at high temperature.Neither additional step for removal of ZnS nanospheres nor doping process is required,significantly simplifying the pore formation process and improving the S doping efficiency.Benefiting from the enhanced intrinsic activity of high-density Fe-N_(4)/Cxsites(23.53μmol g^(-1))and the optimized mass transport of carbon nanofibers,as-synthesized electrocatalyst shows a positive half-wave potential of 0.89 V for oxygen reduction reaction and a small overpotential of 0.47 V at 10 m A cm^(-2)for oxygen evolution reaction.When used as the air cathode catalyst for ZABs,it delivers a high specific capacity of 699 m Ah g^(-1)at 5 m A cm^(-2),a large peak power density of 228 m W cm^(-2)and a prolonged cycling over 1000 h.At 10 m A cm^(-2),a robust structure with atomically dispersed Fe is also remained after cycling for 420 h.Due to the flexible properties of the electrocatalyst,as-assembled quasi-solid-state ZAB shows stable cycling over 90 h at alternately flat/bent states,demonstrating great prospects in flexible electronic device applications.
基金supported by the National Natural Science Foundation of China (Nos.U20B6004,22072179,and 22276202)the Strategic Priority Research Program of the Chinese Academy of Sciences (No.XDA23010200)+1 种基金the Special project of eco-environmental technology for peak carbon dioxide emissions and carbon neutrality (No.RCEES-TDZ2021-2)the Youth Innovation Promotion Association of the Chinese Academy of Sciences (No.2019045)。
文摘TiO_(2)-supported V_(2)O_(5)catalysts are commonly used in NO_(x)reduction with ammonia due to their robust catalytic performance.Over these catalysts,it is generally considered that the active species are mainly derived from the vanadia species rather than the intrinsic structure of V-O-Ti entities,namely the interface sites.To reveal the role of V-O-Ti entities in NH_(3)-SCR,herein,we prepared TiO_(2)/V_(2)O_(5)catalysts and demonstrated that V-O-Ti entities were more active for NO_(x)reduction under wet conditions than the V sites(V=O)working alone.On the V-O-Ti entities,kinetic measurements and first principles calculations revealed that NH_(3)activation exhibited a much lower energy barrier than that on V=O sites.Under wet conditions,the V-O-Ti interface significantly inhibited the transformation of V=O to V-OH sites thus benefiting NH_(3)activation.Under wet conditions,meanwhile,the migration of NH_(4)^(+)from Ti site neighboring the V-O-Ti interface to Ti site of the V-O-Ti interface was exothermic;thus,V-O-Ti entities together with neighboring Ti sites could serve as channels linking NH_(3)pool and active centers for activation of NH_(4)^(+).This finding reveals that the V-O-Ti interface sites on V-based catalysts play a crucial role in NO_(x)removal under realistic conditions,providing a new perspective on NH_(3)-SCR mechanism.
基金supported financially by the National Natural Science Foundation of China,China(Grant No.51702180,51572136,91963113,21703116,51372127,51873096)The Scientific and Technical Development Project of Qingdao,China(Grant No.18-2-2-52-jch)+1 种基金The Taishan Scholar Advantage and Characteristic Discipline Team of Eco Chemical Process and TechnologyThe Natural Science Foundation of Hebei Province(B2019204009)。
文摘Efficient bifunctional oxygen electrocatalysts for ORR and OER are fundamental to the development of high performance metal-air batteries.Herein,a facile cost-efficient two-step pyrolysis strategy for the fabrication of a bifunctional oxygen electrocatalyst has been proposed.The efficient non-preciousmetal-based electrocatalyst,Fe/Fe_(3)C@Fe-N_(x)-C consists of highly curved onion-like carbon shells that encapsulate Fe/Fe_(3)C nanoparticles,distributed on an extensively porous graphitic carbon aerogel.The obtained Fe/Fe_(3)C@Fe-N_(x)-C aerogel exhibited superb electrochemical activity,excellent durability,and high methanol tolerance.The experimental results indicated that the assembly of onion-like carbon shells with encapsulated Fe/Fe_(3)C yielded highly curved carbon surfaces with abundant Fe-Nxactive sites,a porous structure,and enhanced electrocatalytic activity towards ORR and OER,hence displaying promising potential for application as an air cathode in rechargeable Zn-air batteries.The constructed Zn-air battery possessed an exceptional peak power density of~147 mW cm^(-2),outstanding cycling stability(200 cycles,1 h per cycle),and a small voltage gap of 0.87 V.This study offers valuable insights regarding the construction of low-cost and highly active bifunctional oxygen electrocatalysts for efficient air batteries.
文摘The real-time monitoring of environmental radiation dose for nuclear fa-cilities is an important part of safety, in order to guarantee the accuracy of the monitoring results regular calibration is necessary. Around nuclear facilities there are so many environmental dosimeters installed dispers-edly, because of its huge quantity, widely distributed, and in real-time monitoring state;it will cost lots of manpower and finance if it were tak-en to calibrate on standard laboratory;what’s more it will make the en-vironment out of control. To solve the problem of the measurement ac-curacy of the stationary gamma radiation dosimeter, an on-site calibra-tion method is proposed. The radioactive source is X-ray spectrum, and the dose reference instrument which has been calibrated by the national standard laboratory is a high pressure ionization. On-site calibration is divided into two parts;firstly the energy response experiment of dosim-eter for high and low energy is done in the laboratory, and the energy response curve is obtained combining with Monte Carlo simulation;sec-ondly experiment is carried out in the field of the measuring dosimeter, and the substitution method to calibrate the dosimeter is used;finally the calibration coefficient is gotten through energy curve correction. In order to verify the accuracy of on-site calibration method, the calibrated dosimeter is test in the standard laboratory and the error is 3.4%. The re-sult shows that the on-site calibration method using X-ray is feasible, and it can improves the accuracy of the measurement results of the stationary γ-ray instrument;what’s more important is that it has great reference value for the radiation safety management and radiation environment evaluation.
