Amorphous powder cores based on spherical （Fe0.76Si0.09B0.1P0.05）99Nb1 amorphous powder and their SiO2 layer prepared by in situ coating insulation process were investigated in detAll. These cores were characterized...Amorphous powder cores based on spherical （Fe0.76Si0.09B0.1P0.05）99Nb1 amorphous powder and their SiO2 layer prepared by in situ coating insulation process were investigated in detAll. These cores were characterized by scanning electron microscopy and X-ray diffraction analyses, and the results revealed that the surface layer of the amorphous powder was composed of SiO2 with uniform surface coverage. The thickness of the SiO2 insulating layer could be controlled by adjusting the tetraethyl orthosilicate （TEOS） content. By cold-pressing with epoxy resin under a pressure of 1800 MPa, a ring powder core with an outer diameter of 20.3 ram, inner diameter of 12.7 mm, and height of 5.3 mm was prepared. The FeSiBPNb composite core showed its best properties when the TEOS content was 2 mL/g （the volume of TEOS for each gram of （Fe0.76Si0.09B0.1P0.05）99Nb1 amorphous powder, mL/g）, which showed good relative permeability in the high-frequency range of up to 10 MHz and a low core loss of 320 W/kg under the maximum magnetic flux density of 0.1 T and frequency of 100 kHz.展开更多
High-entropy alloys(HEAs),which are composed of 3d transition metals such as Fe,Co,and Ni,exhibit an exceptional combination of magnetic and other properties;however,the addition of non-ferromagnetic elements always n...High-entropy alloys(HEAs),which are composed of 3d transition metals such as Fe,Co,and Ni,exhibit an exceptional combination of magnetic and other properties;however,the addition of non-ferromagnetic elements always negatively affects the saturation magnetization strength(M s).Co_(4)Fe_(2)Al_(x)Mn_(y) alloys were designed and investigated in this study to develop a novel HEA with excellent soft magnetic properties.The Co_(4)Fe_(2)Al_(1.5)Mn_(1.5) HEA possesses the highest M s of 161.3 emu g^(-1) thus far reported for magnetic HEAs,a low coercivity of 1.9 Oe,a high electrical resistivity of 173μΩ cm,a superior thermal stability up to 600℃,which originates from the novel microstructure of B2 nanoparticles distributed in a DO_(3) matrix phase,and the crucial transition of Mn from antiferromagnetism to ferromagnetism with the assistance of Al.The Co_(4)Fe_(2_)Al_(1.5)Mn_(1.5) HEA was selected to produce micron-sized powder and soft magnetic powder cores(SMPCs)for application in the exploration field.The SMPCs exhibit a high stable effective perme-ability of 35.9 up to 1 MHz,low core loss of 38.1 mW cm^(-3)(@100 kHz,20 mT),and an excellent direct current(DC)bias performance of 87.7%at 100 Oe.This study paves the way for the development of soft magnetic HEAs with promising applications as magnetic functional materials.展开更多
基金The work was with the support from the National Key Research and Development Program of China （Grant No. 2017YFB0903902）, National Natural Science Foundation of China （Grant Nos. 51601205, 51671035, 51071034, and 51671206）, and Ningbo Municipal Nature Science Foundation （Grant No. 2017A610036）.
文摘Amorphous powder cores based on spherical （Fe0.76Si0.09B0.1P0.05）99Nb1 amorphous powder and their SiO2 layer prepared by in situ coating insulation process were investigated in detAll. These cores were characterized by scanning electron microscopy and X-ray diffraction analyses, and the results revealed that the surface layer of the amorphous powder was composed of SiO2 with uniform surface coverage. The thickness of the SiO2 insulating layer could be controlled by adjusting the tetraethyl orthosilicate （TEOS） content. By cold-pressing with epoxy resin under a pressure of 1800 MPa, a ring powder core with an outer diameter of 20.3 ram, inner diameter of 12.7 mm, and height of 5.3 mm was prepared. The FeSiBPNb composite core showed its best properties when the TEOS content was 2 mL/g （the volume of TEOS for each gram of （Fe0.76Si0.09B0.1P0.05）99Nb1 amorphous powder, mL/g）, which showed good relative permeability in the high-frequency range of up to 10 MHz and a low core loss of 320 W/kg under the maximum magnetic flux density of 0.1 T and frequency of 100 kHz.
基金supported by Youth Innovation Promotion Association CAS (Grant No.2021294)the S&T Innovation 2025 Major Special Program (Grant No.2021Z038)+1 种基金the 2022 Xinjiang Uygur Autonomous Region Postgraduate Innovation Research Program (Grand No.XJ2022G070)the Tianshan Innovation Team Program of Xinjiang Uygur Autonomous Region (Grand No.2020D14038).
文摘High-entropy alloys(HEAs),which are composed of 3d transition metals such as Fe,Co,and Ni,exhibit an exceptional combination of magnetic and other properties;however,the addition of non-ferromagnetic elements always negatively affects the saturation magnetization strength(M s).Co_(4)Fe_(2)Al_(x)Mn_(y) alloys were designed and investigated in this study to develop a novel HEA with excellent soft magnetic properties.The Co_(4)Fe_(2)Al_(1.5)Mn_(1.5) HEA possesses the highest M s of 161.3 emu g^(-1) thus far reported for magnetic HEAs,a low coercivity of 1.9 Oe,a high electrical resistivity of 173μΩ cm,a superior thermal stability up to 600℃,which originates from the novel microstructure of B2 nanoparticles distributed in a DO_(3) matrix phase,and the crucial transition of Mn from antiferromagnetism to ferromagnetism with the assistance of Al.The Co_(4)Fe_(2_)Al_(1.5)Mn_(1.5) HEA was selected to produce micron-sized powder and soft magnetic powder cores(SMPCs)for application in the exploration field.The SMPCs exhibit a high stable effective perme-ability of 35.9 up to 1 MHz,low core loss of 38.1 mW cm^(-3)(@100 kHz,20 mT),and an excellent direct current(DC)bias performance of 87.7%at 100 Oe.This study paves the way for the development of soft magnetic HEAs with promising applications as magnetic functional materials.
