Magmatic oxide deposits in the～260 Ma Emeishan Large Igneous Province（ELIP）,SW China and northern Vietnam,are important sources of Fe,Ti and V.Some giant magmatic Fe-Ti-V oxide deposits, such as the Panzhihua,Hongg...Magmatic oxide deposits in the～260 Ma Emeishan Large Igneous Province（ELIP）,SW China and northern Vietnam,are important sources of Fe,Ti and V.Some giant magmatic Fe-Ti-V oxide deposits, such as the Panzhihua,Hongge,and Baima deposits,are well described in the literature and are hosted in layered mafic-ultramafic intrusions in the Panxi region,the central ELIP.The same type of ELIP- related deposits also occur far to the south and include the Anyi deposit,about 130 km south of Panzhihua,and the Mianhuadi deposit in the Red River fault zone.The Anyi deposit is relatively small but is similarly hosted in a layered mafic intrusion.The Mianhuadi deposit has a zircon U-Pb age of～260 Ma and is thus contemporaneous with the ELIP.This deposit was variably metamorphosed during the Indosinian orogeny and Red River faulting.Compositionally,magnetite of the Mianhuadi deposit contains smaller amounts of Ti and V than that of the other deposits,possibly attributable to the later metamorphism.The distribution of the oxide ore deposits is not related to the domal structure of the ELIP.One major feature of all the oxide deposits in the ELIP is the spatial association of oxide-bearing gabbroic intrusions,syenitic plutons and high-Ti flood basalts.Thus,we propose that magmas from a mantle plume were emplaced into a shallow magma chamber where they were evolved into a field of liquid immiscibility to form two silicate liquids,one with an extremely Fe-Ti-rich gabbroic composition and the other syenitic.An immiscible Fe-Ti-（P） oxide melt may then separate from the mafic magmas to form oxide deposits.The parental magmas from which these deposits formed were likely Fe-Ti-rich picritic in composition and were derived from enriched asthenospheric mantle at a greater depth than the magmas that produced sulfide-bearing intrusions of the ELIP.展开更多
The equilibrium product in Fe-Cu-Ce,Fe-P-Ce or Fe-Ti-Ce solution have ben Mentified to be Ce_2O_2S,but not the intermetallic compounds of Ce against Cu,P or Ti.The equilibrium eonstant of Ce_2O_2S=2[Ce]+2[O]+[S] and t...The equilibrium product in Fe-Cu-Ce,Fe-P-Ce or Fe-Ti-Ce solution have ben Mentified to be Ce_2O_2S,but not the intermetallic compounds of Ce against Cu,P or Ti.The equilibrium eonstant of Ce_2O_2S=2[Ce]+2[O]+[S] and the interaction coefficients between solutes in Fe-base solution have been determined as follows: K_(Ce_2O_2S)=2.57×10^(-5) e_(Ce)^(Cu)=-0.49;e_(Ce)~P=1.77;e_(Ce)^(Ti)=-3.62 e_(Cu)^(Ce)=-0.22;e_P^(Ce)=0.39;e_(Ti)^(Ce)=-1.23 ε_(Ce)^(Cu)=-128.0;ε_(Ce)~P=-224.1;ε_(Ce)^(Ti)=-710.0 Ce decreases the activities of Cu and Ti in Fe-base solution and increases their solubifities,as well as increases the activity of P and decreases its solubility.展开更多
P/M Ti-Fe-Mo-Y alloys with different Rare-earth Y Content are prepared by blend element method, its sintering and hot deformation behaviors are studied together with microstructure and mechanical properties. The micro...P/M Ti-Fe-Mo-Y alloys with different Rare-earth Y Content are prepared by blend element method, its sintering and hot deformation behaviors are studied together with microstructure and mechanical properties. The microstructures and properties of the alloying titanium were testified by the analysis of Optical microscopy (OM), X-ray diffraction (XRD), scanning electron microscopy (SEM).The result indicated that Y element absorbs free oxygen and purify the Ti powder surface, promoting densification process. With appropriate vacuum and temperature, the blend element metal powder sintering relative density can reach more than 97%. Microstructure and mechanical properties analysis shown that Y element composed Y2O3 particles which refine grains and improve plasticity, elevate alloy distortion ability. After hot deformation, grains crashed and flow line appears, the mechanical properties of Ti-Fe-Mo-Y alloy prompted which also validated by large amount of dimples appear in tensile fracture surface.展开更多
基金supported by the Research Grant Council of Hong Kong(HKU707012P)to MFZfrom a Chinese National "973" project (2011CB808903)+1 种基金a "CAS Hundred Talents" project under Chinese Academy of Sciences to CYWSouth African National Science Foundation Grant SA/China Project 67220 to SP and MFZ
文摘Magmatic oxide deposits in the～260 Ma Emeishan Large Igneous Province（ELIP）,SW China and northern Vietnam,are important sources of Fe,Ti and V.Some giant magmatic Fe-Ti-V oxide deposits, such as the Panzhihua,Hongge,and Baima deposits,are well described in the literature and are hosted in layered mafic-ultramafic intrusions in the Panxi region,the central ELIP.The same type of ELIP- related deposits also occur far to the south and include the Anyi deposit,about 130 km south of Panzhihua,and the Mianhuadi deposit in the Red River fault zone.The Anyi deposit is relatively small but is similarly hosted in a layered mafic intrusion.The Mianhuadi deposit has a zircon U-Pb age of～260 Ma and is thus contemporaneous with the ELIP.This deposit was variably metamorphosed during the Indosinian orogeny and Red River faulting.Compositionally,magnetite of the Mianhuadi deposit contains smaller amounts of Ti and V than that of the other deposits,possibly attributable to the later metamorphism.The distribution of the oxide ore deposits is not related to the domal structure of the ELIP.One major feature of all the oxide deposits in the ELIP is the spatial association of oxide-bearing gabbroic intrusions,syenitic plutons and high-Ti flood basalts.Thus,we propose that magmas from a mantle plume were emplaced into a shallow magma chamber where they were evolved into a field of liquid immiscibility to form two silicate liquids,one with an extremely Fe-Ti-rich gabbroic composition and the other syenitic.An immiscible Fe-Ti-（P） oxide melt may then separate from the mafic magmas to form oxide deposits.The parental magmas from which these deposits formed were likely Fe-Ti-rich picritic in composition and were derived from enriched asthenospheric mantle at a greater depth than the magmas that produced sulfide-bearing intrusions of the ELIP.
文摘The equilibrium product in Fe-Cu-Ce,Fe-P-Ce or Fe-Ti-Ce solution have ben Mentified to be Ce_2O_2S,but not the intermetallic compounds of Ce against Cu,P or Ti.The equilibrium eonstant of Ce_2O_2S=2[Ce]+2[O]+[S] and the interaction coefficients between solutes in Fe-base solution have been determined as follows: K_(Ce_2O_2S)=2.57×10^(-5) e_(Ce)^(Cu)=-0.49;e_(Ce)~P=1.77;e_(Ce)^(Ti)=-3.62 e_(Cu)^(Ce)=-0.22;e_P^(Ce)=0.39;e_(Ti)^(Ce)=-1.23 ε_(Ce)^(Cu)=-128.0;ε_(Ce)~P=-224.1;ε_(Ce)^(Ti)=-710.0 Ce decreases the activities of Cu and Ti in Fe-base solution and increases their solubifities,as well as increases the activity of P and decreases its solubility.
基金National Key Technology R&D Program (2007BAE07B05)
文摘P/M Ti-Fe-Mo-Y alloys with different Rare-earth Y Content are prepared by blend element method, its sintering and hot deformation behaviors are studied together with microstructure and mechanical properties. The microstructures and properties of the alloying titanium were testified by the analysis of Optical microscopy (OM), X-ray diffraction (XRD), scanning electron microscopy (SEM).The result indicated that Y element absorbs free oxygen and purify the Ti powder surface, promoting densification process. With appropriate vacuum and temperature, the blend element metal powder sintering relative density can reach more than 97%. Microstructure and mechanical properties analysis shown that Y element composed Y2O3 particles which refine grains and improve plasticity, elevate alloy distortion ability. After hot deformation, grains crashed and flow line appears, the mechanical properties of Ti-Fe-Mo-Y alloy prompted which also validated by large amount of dimples appear in tensile fracture surface.
