以磷铁废渣(Fe1.5P)和温室效应气体CO_2为原料,以磷酸为补充磷源合成磷酸铁锂(LiFePO_4)的前驱体Fe_2P_2O_7,并研究了其合成过程对LiFePO_4正极材料储能性能的影响。采用SEM观察了LiFePO_4的表面形貌,采用XRD分析了LiFePO_4和Fe_2P_2O_...以磷铁废渣(Fe1.5P)和温室效应气体CO_2为原料,以磷酸为补充磷源合成磷酸铁锂(LiFePO_4)的前驱体Fe_2P_2O_7,并研究了其合成过程对LiFePO_4正极材料储能性能的影响。采用SEM观察了LiFePO_4的表面形貌,采用XRD分析了LiFePO_4和Fe_2P_2O_7的晶体结构。进一步对该方法进行优化,发现Fe1.5P与磷酸混合物(nFe1.5P∶nH3PO4=1∶1)在800℃热处理6 h合成的Fe_2P_2O_7对应的LiFePO_4/C电化学性能最好,在0.1C,0.2C,0.5C和1C倍率下的容量分别可达130,126,117和108 m Ah·g^(-1)。展开更多
利用Fe_2P_2O_7和碳酸锂为原材料,并通过不同的碳包覆合成LiFePO_4/C复合材料.利用XRD、SEM、碳硫分析仪、恒流充放电法和循环伏安对产物的组成、结构、形貌和电化学性能进行测试,确定含碳量为2.45wt%的LiFePO_4/C复合材料具有更好的电...利用Fe_2P_2O_7和碳酸锂为原材料,并通过不同的碳包覆合成LiFePO_4/C复合材料.利用XRD、SEM、碳硫分析仪、恒流充放电法和循环伏安对产物的组成、结构、形貌和电化学性能进行测试,确定含碳量为2.45wt%的LiFePO_4/C复合材料具有更好的电化学性能.实验结果表明,在0.1C倍率下,锂离子电池的放电比容量为130.49 m Ah/g,在1C倍率下,锂离子电池的放电比容量为108.58 m Ah/g.展开更多
In order to control the size and distribution of the high conductive Fe2P in LiFePO4/Fe2P composite, two different cooling rates (Fast: 15 ℃·min-1, Slow: 2 ℃·min-1) were employed after mechanical alloying....In order to control the size and distribution of the high conductive Fe2P in LiFePO4/Fe2P composite, two different cooling rates (Fast: 15 ℃·min-1, Slow: 2 ℃·min-1) were employed after mechanical alloying. The discharge capacity of the fast cooled was 83 mAh·g-1 and the slow cooled 121 mAh·g-1. The particle size of the synthesized powder was examined by transmission electron microscopy and distribution of Fe2P was characterized using scanning electron microscopy (SEM). In addition, two-step heat treatment was carried out for better distribution of Fe2P. X-ray diffraction (XRD) and Rietveld refinement reveal that LiFePO4/Fe2P composite consists of 95.77% LiFePO4 and 4.33% of Fe2P.展开更多
通过XRD分析,研究预烧、煅烧环境对制备磷酸铁锂（LiFePO4）时磷化铁（Fe2P）杂质的影响。预烧中生成大量的还原性气体及煅烧温度,对Fe2P的生成有重要影响。在预烧和煅烧过程中,对LiFePO4的深度还原是Fe2P形成的唯一原因。含有Fe2P的LiF...通过XRD分析,研究预烧、煅烧环境对制备磷酸铁锂（LiFePO4）时磷化铁（Fe2P）杂质的影响。预烧中生成大量的还原性气体及煅烧温度,对Fe2P的生成有重要影响。在预烧和煅烧过程中,对LiFePO4的深度还原是Fe2P形成的唯一原因。含有Fe2P的LiFePO4的动力学特性更高。4 kg/批下制备的LiFePO4前驱体在箱式炉中预烧,再在管式炉中800℃下煅烧20 h,产物在2.0--4.2 V循环,0.1 C首次放电比容量为152 m Ah/g,2.0 C放电比容量可达133 m Ah/g。展开更多
A 60%Fe/Al_2O_3 catalyst was prepared by the co-precipitation method.It was reduced by H_2 to produce metallic Fe,which was then sulfided by CS_2 to Fe_(0.96) S and Fe_3S_4 or phosphided by triphenylphosphine(PPh3) in...A 60%Fe/Al_2O_3 catalyst was prepared by the co-precipitation method.It was reduced by H_2 to produce metallic Fe,which was then sulfided by CS_2 to Fe_(0.96) S and Fe_3S_4 or phosphided by triphenylphosphine(PPh3) in liquid phases to Fe2 P and Fe P.It was found that the iron sulfides(Fe0.96 S and Fe_3S_4) exhibited the low activity for the hydrodesulfurization(HDS) reactions.The HDS activity was also low on the Fe(metal)/Al_2O_3 and Fe_2 P/Al_2O_3 catalysts since they were converted into Fe0.96 S and Fe_3S_4 during the HDS reactions.In contrast,the FeP/Al_2O_3 was found to be stable and active for the HDS reactions.In particular,Fe P/Al_2O_3 possessed significantly smaller Fe P particles than Fe P/C,leading to the significant higher HDS activity of FeP/Al_2O_3 than Fe P/C.展开更多
利用Fe Ti B熔体反应制备了TiB2颗粒增强铁基复合材料,研究了该材料的显微组织。热力学分析表明,Fe Ti B熔体具有反应生成TiB2的可能性。试验结果表明,TiB2颗粒均匀分布于α Fe晶粒中,晶内TiB2粒子平均间距大于晶界。TiB2粒子尺寸大多为...利用Fe Ti B熔体反应制备了TiB2颗粒增强铁基复合材料,研究了该材料的显微组织。热力学分析表明,Fe Ti B熔体具有反应生成TiB2的可能性。试验结果表明,TiB2颗粒均匀分布于α Fe晶粒中,晶内TiB2粒子平均间距大于晶界。TiB2粒子尺寸大多为1～6μm,形状大多为接近等轴的多面体。展开更多
A LiFePO4/（C＋Fe2P） composite cathode material was prepared by a sol-gel method using Fe（NO3）3.9H20, LiAc·H2O）, NHaH2PO4 and citric acid as raw materials, and the physical properties and electrochemical perf...A LiFePO4/（C＋Fe2P） composite cathode material was prepared by a sol-gel method using Fe（NO3）3.9H20, LiAc·H2O）, NHaH2PO4 and citric acid as raw materials, and the physical properties and electrochemical performance of the composite cathode material were investigated by X-ray diffractometry （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM） and electrochemical tests. The Fe2P content, morphology and electrochemical performance of LiFePOa/（C＋Fe2P） composite depend on the calcination temperature. The optimized LiFePO4/（C＋FeeP） composite is prepared at 650 ~C and the optimized composite exhibits sphere-like morphology with porous structure and Fe2P content of about 3.2% （mass fraction）. The discharge capacity of the optimized LiFePO4/（C＋FeRP） at 0.1C is 156 and 161 mA.h/g at 25 and 55 ℃, respectively, and the corresponding capacity retentions are 96% after 30 cycles; while the capacity at 1C is 142 and 149 mA.h/g at 25 and 55 ℃, respectively, and the capacity still remains 135 and 142 mA-h/g after 30 cycles at 25 and 55℃, respectively.展开更多
Since the discovery of giant magnetocaloric effect in MnFeP1-x As x compounds,much valuable work has been performed to develop and improve Fe2P-type transition-metal-based magnetic refrigerants.In this article,the rec...Since the discovery of giant magnetocaloric effect in MnFeP1-x As x compounds,much valuable work has been performed to develop and improve Fe2P-type transition-metal-based magnetic refrigerants.In this article,the recent progress of our studies on fundamental aspects of theoretical considerations and experimental techniques,effects of atomic substitution on the magnetism and magnetocalorics of Fe2P-type intermetallic compounds MnFeX（X=P,As,Ge,Si） is reviewed.Substituting Si（or Ge） for As leads to an As-free new magnetic material MnFeP1-xSi（Ge）x.These new materials show large magnetocaloric effects resembling MnFe（P,As） near room temperature.Some new physical phenomena,such as huge thermal hysteresis and ＇virgin＇ effect,were found in new materials.On the basis of Landau theory,a theoretical model was developed for studying the mechanism of phase transition in these materials.Our studies reveal that MnFe（P,Si） compound is a very promising material for room-temperature magnetic refrigeration and thermo-magnetic power generation.展开更多
In order to obtain a new precursor for LiFePO4, Fe2P2O7 with high purity was prepared through solid phase reaction at 650 ℃ using starting materials of FeC2O4 and NH4H2PO4 in an argon atmosphere. Using the as-prepare...In order to obtain a new precursor for LiFePO4, Fe2P2O7 with high purity was prepared through solid phase reaction at 650 ℃ using starting materials of FeC2O4 and NH4H2PO4 in an argon atmosphere. Using the as-prepared Fe2P2O7, Li2CO3 and glucose as raw materials, pure LiFePO4 and LiFePO4/C composite materials were respectively synthesized by solid state reaction at 700 ℃ in an argon atmosphere. X-ray diffractometry and scanning electron microscopy（SEM） were employed to characterize the as-prepared Fe2P2O7, LiFePO4 and LiFePO4/C. The as-prepared Fe2P2O7 crystallizes in the Cl space group and belongs to β-Fe2P2O7 for crystal phase. The particle size distribution of Fe2P2O7 observed by SEM is 0.4-3.0 μm. During the Li^＋ ion chemical intercalation, radical P2O7^4- is disrupted into two PO4^3- ions in the presence of O^2-, thus providing a feasible technique to dispose this poor dissolvable pyrophosphate. LiFePO4/C composite exhibits initial charge and discharge capacities of 154 and 132 mA·h/g, respectively.展开更多
基金financially supported by the National Science Foundation of China (Grant No.21576170)the Opening Project of Material Corrosion and Protection Key Laboratory of Sichuan province (Grant No.2017CL19)~~
文摘以磷铁废渣(Fe1.5P)和温室效应气体CO_2为原料,以磷酸为补充磷源合成磷酸铁锂(LiFePO_4)的前驱体Fe_2P_2O_7,并研究了其合成过程对LiFePO_4正极材料储能性能的影响。采用SEM观察了LiFePO_4的表面形貌,采用XRD分析了LiFePO_4和Fe_2P_2O_7的晶体结构。进一步对该方法进行优化,发现Fe1.5P与磷酸混合物(nFe1.5P∶nH3PO4=1∶1)在800℃热处理6 h合成的Fe_2P_2O_7对应的LiFePO_4/C电化学性能最好,在0.1C,0.2C,0.5C和1C倍率下的容量分别可达130,126,117和108 m Ah·g^(-1)。
文摘利用Fe_2P_2O_7和碳酸锂为原材料,并通过不同的碳包覆合成LiFePO_4/C复合材料.利用XRD、SEM、碳硫分析仪、恒流充放电法和循环伏安对产物的组成、结构、形貌和电化学性能进行测试,确定含碳量为2.45wt%的LiFePO_4/C复合材料具有更好的电化学性能.实验结果表明,在0.1C倍率下,锂离子电池的放电比容量为130.49 m Ah/g,在1C倍率下,锂离子电池的放电比容量为108.58 m Ah/g.
文摘In order to control the size and distribution of the high conductive Fe2P in LiFePO4/Fe2P composite, two different cooling rates (Fast: 15 ℃·min-1, Slow: 2 ℃·min-1) were employed after mechanical alloying. The discharge capacity of the fast cooled was 83 mAh·g-1 and the slow cooled 121 mAh·g-1. The particle size of the synthesized powder was examined by transmission electron microscopy and distribution of Fe2P was characterized using scanning electron microscopy (SEM). In addition, two-step heat treatment was carried out for better distribution of Fe2P. X-ray diffraction (XRD) and Rietveld refinement reveal that LiFePO4/Fe2P composite consists of 95.77% LiFePO4 and 4.33% of Fe2P.
文摘通过XRD分析,研究预烧、煅烧环境对制备磷酸铁锂（LiFePO4）时磷化铁（Fe2P）杂质的影响。预烧中生成大量的还原性气体及煅烧温度,对Fe2P的生成有重要影响。在预烧和煅烧过程中,对LiFePO4的深度还原是Fe2P形成的唯一原因。含有Fe2P的LiFePO4的动力学特性更高。4 kg/批下制备的LiFePO4前驱体在箱式炉中预烧,再在管式炉中800℃下煅烧20 h,产物在2.0--4.2 V循环,0.1 C首次放电比容量为152 m Ah/g,2.0 C放电比容量可达133 m Ah/g。
基金Financial supports from the NSFC-DFG (21761132006),NSFC (21773108)fundamental research funds for central universities are acknowledged
文摘A 60%Fe/Al_2O_3 catalyst was prepared by the co-precipitation method.It was reduced by H_2 to produce metallic Fe,which was then sulfided by CS_2 to Fe_(0.96) S and Fe_3S_4 or phosphided by triphenylphosphine(PPh3) in liquid phases to Fe2 P and Fe P.It was found that the iron sulfides(Fe0.96 S and Fe_3S_4) exhibited the low activity for the hydrodesulfurization(HDS) reactions.The HDS activity was also low on the Fe(metal)/Al_2O_3 and Fe_2 P/Al_2O_3 catalysts since they were converted into Fe0.96 S and Fe_3S_4 during the HDS reactions.In contrast,the FeP/Al_2O_3 was found to be stable and active for the HDS reactions.In particular,Fe P/Al_2O_3 possessed significantly smaller Fe P particles than Fe P/C,leading to the significant higher HDS activity of FeP/Al_2O_3 than Fe P/C.
文摘利用Fe Ti B熔体反应制备了TiB2颗粒增强铁基复合材料,研究了该材料的显微组织。热力学分析表明,Fe Ti B熔体具有反应生成TiB2的可能性。试验结果表明,TiB2颗粒均匀分布于α Fe晶粒中,晶内TiB2粒子平均间距大于晶界。TiB2粒子尺寸大多为1～6μm,形状大多为接近等轴的多面体。
基金Project(50571091) supported by the National Natural Science Foundation of ChinaProject(09C947) supported by the Scientific Research Fund of Hunan Provincial Education Department,China
文摘A LiFePO4/（C＋Fe2P） composite cathode material was prepared by a sol-gel method using Fe（NO3）3.9H20, LiAc·H2O）, NHaH2PO4 and citric acid as raw materials, and the physical properties and electrochemical performance of the composite cathode material were investigated by X-ray diffractometry （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM） and electrochemical tests. The Fe2P content, morphology and electrochemical performance of LiFePOa/（C＋Fe2P） composite depend on the calcination temperature. The optimized LiFePO4/（C＋FeeP） composite is prepared at 650 ~C and the optimized composite exhibits sphere-like morphology with porous structure and Fe2P content of about 3.2% （mass fraction）. The discharge capacity of the optimized LiFePO4/（C＋FeRP） at 0.1C is 156 and 161 mA.h/g at 25 and 55 ℃, respectively, and the corresponding capacity retentions are 96% after 30 cycles; while the capacity at 1C is 142 and 149 mA.h/g at 25 and 55 ℃, respectively, and the capacity still remains 135 and 142 mA-h/g after 30 cycles at 25 and 55℃, respectively.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 50661004 and 51161017)
文摘Since the discovery of giant magnetocaloric effect in MnFeP1-x As x compounds,much valuable work has been performed to develop and improve Fe2P-type transition-metal-based magnetic refrigerants.In this article,the recent progress of our studies on fundamental aspects of theoretical considerations and experimental techniques,effects of atomic substitution on the magnetism and magnetocalorics of Fe2P-type intermetallic compounds MnFeX（X=P,As,Ge,Si） is reviewed.Substituting Si（or Ge） for As leads to an As-free new magnetic material MnFeP1-xSi（Ge）x.These new materials show large magnetocaloric effects resembling MnFe（P,As） near room temperature.Some new physical phenomena,such as huge thermal hysteresis and ＇virgin＇ effect,were found in new materials.On the basis of Landau theory,a theoretical model was developed for studying the mechanism of phase transition in these materials.Our studies reveal that MnFe（P,Si） compound is a very promising material for room-temperature magnetic refrigeration and thermo-magnetic power generation.
基金Project(50604018)supported by the National Natural Science Foundation of China
文摘In order to obtain a new precursor for LiFePO4, Fe2P2O7 with high purity was prepared through solid phase reaction at 650 ℃ using starting materials of FeC2O4 and NH4H2PO4 in an argon atmosphere. Using the as-prepared Fe2P2O7, Li2CO3 and glucose as raw materials, pure LiFePO4 and LiFePO4/C composite materials were respectively synthesized by solid state reaction at 700 ℃ in an argon atmosphere. X-ray diffractometry and scanning electron microscopy（SEM） were employed to characterize the as-prepared Fe2P2O7, LiFePO4 and LiFePO4/C. The as-prepared Fe2P2O7 crystallizes in the Cl space group and belongs to β-Fe2P2O7 for crystal phase. The particle size distribution of Fe2P2O7 observed by SEM is 0.4-3.0 μm. During the Li^＋ ion chemical intercalation, radical P2O7^4- is disrupted into two PO4^3- ions in the presence of O^2-, thus providing a feasible technique to dispose this poor dissolvable pyrophosphate. LiFePO4/C composite exhibits initial charge and discharge capacities of 154 and 132 mA·h/g, respectively.
