柑橘皮提取液绿色合成纳米Fe3O4及其吸附水中孔雀石绿的性能研究

以柑橘皮提取液为还原剂和稳定剂,绿色合成Fe3O4纳米材料,利用扫描电子显微镜(SEM)、X射线衍射图谱(XRD)、傅立叶变换红外光谱(FT-IR)等手段对材料进行表征,并考察了其对孔雀石绿(MG)的吸附性能。结果表明:绿色合成纳米Fe3O4呈不规则圆球体,分散性和结晶度较好。在投加量为1.0 g/L、初始pH为4、温度为25℃、初始浓度为20 mg/L时,对孔雀石绿的吸附率达到95.33%。纳米Fe3O4对MG的吸附过程分别符合准二级动力学方程和Langmuir等温方程。热力学研究表明,纳米Fe3O4吸附MG是自发吸热过程。绿色合成纳米Fe3O4重复利用4次吸附率仍在70%以上。

Magnetic Fe_3O_4-Reduced Graphene Oxide Nanocomposites-Based Electrochemical Biosensing

An electrochemical biosensing platform was developed based on glucose oxidase(GOx)/Fe3O4-reduced graphene oxide(Fe3O4-RGO) nanosheets loaded on the magnetic glassy carbon electrode(MGCE).With the advantages of the magnetism, conductivity and biocompatibility of the Fe3O4-RGO nanosheets, the nanocomposites could be facilely adhered to the electrode surface by magnetically controllable assembling and beneficial to achieve the direct redox reactions and electrocatalytic behaviors of GOx immobilized into the nanocomposites. The biosensor exhibited good electrocatalytic activity, high sensitivity and stability. The current response is linear over glucose concentration ranging from 0.05 to 1.5 m M with a low detection limit of0.15 μM. Meanwhile, validation of the applicability of the biosensor was carried out by determining glucose in serum samples. The proposed protocol is simple, inexpensive and convenient, which shows great potential in biosensing application.

Enhanced Fenton,photo-Fenton and peroxidase-like activity and stability over Fe_3O_4/g-C_3N_4 nanocomposites

We prepared the Fe3O4/g‐C3N4nanoparticles(NPs)through a simple electrostatic self‐assembly method with a3:97weight ratio to investigate their Fenton,photo‐Fenton and oxidative functionalities besides photocatalytic functionality.We observed an improvement of the Fenton and photo‐Fenton activities of the Fe3O4/g‐C3N4nanocomposites.This improvement was attributed to efficient charge transfer between Fe3O4and g‐C3N4at the heterojunctions,inhibition of electron‐hole recombination,a high surface area,and stabilization of Fe3O4against leaching by the hydrophobic g‐C3N4.The obtained NPs showed a higher degradation potential for rhodamine B(RhB)dye than those of Fe3O4and g‐C3N4.As compared to photocatalysis,the efficiency of RhB degradation in the Fenton and photo‐Fenton reactions was increased by20%and90%,respectively.Additionally,the horseradish peroxidase(HRP)activity of the prepared nanomaterials was studied with3,3,5,5‐tetramethylbenzidinedihydrochloride(TMB)as a substrate.Dopamine oxidation was also examined.Results indicate that Fe3O4/g‐C3N4nanocomposites offers more efficient degradation of RhB dye in a photo‐Fenton system compared with regular photocatalytic degradation,which requires a long time.Our study also confirmed that Fe3O4/g‐C3N4nanocomposites can be used as a potential material for mimicking HRP owing to its high affinity for TMB.These findings suggest good potential for applications in biosensing and as a catalyst in oxidation reactions.

Preparation and Characterization of Superparamagnetic Fe_3O_4/CNTs Nanocomposites Dual-drug Carrier

Fe3O4/carbon nanotubes（Fe3O4/CNTs） nanocomposites were prepared by polylol hightemperature decomposition of the precursor ferric chloride and CNTs in liquid triethylene glycol.After surface modification with hexanediamine,folate was covalently linked to the amine group of magnetic Fe3O4/CNTs nanocomposites.The products were characterized by Fourier-transform infrared spectroscopy,transmission electron microscopy,and vibrating sample magnetometry.Then Fe3O4/CNTs were used as a dual-drug carrier to co-delivery of the hydrophilic drug epirubicin hydrochloride and hydrophobic drug paclitaxel.The results indicated that the Fe3O4/CNTs had a favorable release property for epirubicin and paclitaxel,and thus had potential application in tumor-targeted combination chemotherapy.

Synthesis of Fe_3O_4-coated silica aerogel nanocomposites

Fe3O4:SiO2 nanocomposite powders were synthesized by a two-step process,which included the precipitation of FeCl2 and FeCl3 and the gelation of silicic acid solution derived from water glass.At first,Fe3O4 nanoparticles having a crystallite size of 20 nm were obtained by controlling the ratio of Fe(II) and Fe(III) precursors.In the second step,Fe3O4 particles were embedded in SiO2 matrix by the hydrolysis and subsequent condensation of the silicic acid solution containing Fe3O4 particles.It was found that the Fe3O4 nanoparticles homogenously disperse in the SiO2 matrix.The Fe3O4:SiO2 nanocomposite exhibited an enhanced thermal stability against oxidation compared with pure Fe3O4.FT-IR analysis indicates the presence of the Si-O-Fe bond in the Fe3O4:SiO2 (1:10,mole fraction) nanocomposite.

Synthesis of Polyaniline-Fe_3O_4 Nanocomposites and Their Conductivity and Magnetic Properties

By using inorganic Fe3O4 nanoparticles of different content as nucleation sites, PAn-Fe3O4 nanorods were successfully synthesized through a simple, conventional, and inexpensive one-step in-situ polymerization method. The TEM images revealed the size and morphology of the resultant nanocomposite. The EDS pattern confirmed the existence of Fe3O4 in the composite. The FT-IR spectral analysis confirmed the formation of PAn encapsulated Fe3O4 nanocomposite. With the content of Fe3O4 increasing, the conductivity of the nanocomposites gradually decreases, meanwhile, the saturation magnetization increases and reveals a super paramagnetic behavior. With controllable electrical, magnetic, and electromagnetic properties, the well-prepared nanocomposites may have the potential applications in chemical sensors, catalysis, microwave absorbing, and electro-magneto-rheological fluids, etc.

基于Fe3O4@Au模拟酶智能手机比色法检测牛奶中尿酸的研究

目的 利用Fe3O4@Au的过氧化物模拟酶活性构建检测牛奶中过量尿酸的智能手机比色传感器。方法 通过单因素正交实验获取模拟酶比色和智能手机比色的最佳检测条件,利用紫外分光光度法和智能手机比色法测定不同浓度的尿酸溶液,同时评估体系的灵敏度、抗干扰性和稳定性。结果 Fe3O4@Au最优催化体系为反应温度60℃,反应时间50min及Fe3O4@Au添加量0.015g。智能手机比色体系最优相机分辨率为12 MP,光圈f值为4.00 mm,感光度(photosensibility, ISO)值为800及快门速度为0.002 s;基于智能手机比色法检测尿酸最优条件下,尿酸浓度在0.075~7.500mmol/L范围内显现出良好的线性关系,工作曲线为Y1=-47.362X1+494.35(r2=0.9918),检出限为0.043μmol/L。在实际样品检测中,加标回收率在96.90%~112.81%之间,相对标准偏差均低于4.00%。结论 基于Fe3O4@Au模拟酶活性建立的智能手机比色检测体系,具有极高的灵敏度,良好的抗干扰性和稳定性,该研究成果将为尿酸等食品成分的分析检测提供一条新的渠道。

Design of Fe(3–x)O4 raspberry decorated graphene nanocomposites with high performances in lithium-ion battery

Fe（3–x）O4 raspberry shaped nanostructures/graphene nanocomposites were synthesized by a one-step polyol-solvothermal method to be tested as electrode materials for Li-ion battery（LIB）. Indeed, Fe（3–x）O4 raspberry shaped nanostructures consist of original oriented aggregates of Fe（3–x）O4 magnetite nanocrystals, ensuring a low oxidation state of magnetite and a hollow and porous structure, which has been easily combined with graphene sheets. The resulting nanocomposite powder displays a very homogeneous spatial distribution of Fe（3–x）O4 nanostructures at the surface of the graphene sheets. These original nanostructures and their strong interaction with the graphene sheets resulted in very small capacity fading upon Li＋ion intercalation. Reversible capacity, as high as 660 m Ah/g, makes this material promising for anode in Li-ion batteries application.

导电聚合物与Fe_(3)O_(4)复合吸波织物的研究进展

导电聚合物由于其密度低、耐腐蚀、导电率可调等优异性能在吸波领域作用显著。聚吡咯、聚苯胺和聚噻吩是常见的导电聚合物。Fe_(3)O_(4)是一种尖晶石型立方晶系的铁氧体,由于其低成本、优良导电性以及高磁导率等优异性能,被广泛用于吸波材料研究。简述了导电聚合物与Fe_(3)O_(4)的特点及吸波原理,重点阐述了导电聚合物/Fe_(3)O_(4)复合织物的研究进展,最后对其发展趋势做了简要分析。

Absorption performance of DMSA modified Fe_3O_4@SiO_2 core/shell magnetic nanocomposite for Pb^(2+) removal

The purpose of this study is to explore the adsorption performance of meso-2,3-dimercaptosuccinic acid(DMSA)modified Fe3O4@SiO2 magnetic nanocomposite(Fe3O4@SiO2@DMSA)for Pb2+ions removal from aqueous solutions.The effects of solution pH,initial concentration of Pb2+ions,contact time,and temperature on the amount of Pb2+adsorbed were investigated.Adsorption isotherms,adsorption kinetics,and thermodynamic analysis were also studied.The results showed that the maximum adsorption capacity of the Fe3O4@SiO2@DMSA composite is 50.5 mg/g at 298 K,which is higher than that of Fe3O4 and Fe3O4@SiO2 magnetic nanoparticles.The adsorption process agreed well with Langmuir adsorption isotherm models and pseudo second-order kinetics.The thermodynamic analysis revealed that the adsorption was spontaneous,endothermic and energetically driven in nature.

Structures and magnetic properties of nanocomposite CoFe_2O_4-BaTiO_3 fibers by organic gel-thermal decomposition process

The nanocomposite xCoFe2O4-(1-x)BaTiO3(x=0.2,0.3,0.4,0.5,molar fraction) fibers with fine diameters and high aspect ratios(length to diameter ratios) were prepared by the organic gel-thermal decomposition process from citric acid and metal salts.The structures and morphologies of gel precursors and fibers derived from thermal decomposition of the gel precursors were characterized by Fourier transform infrared spectroscopy,X-ray diffractometry and scanning electron microscopy.The magnetic properties of the nanocomposite fibers were measured by vibrating sample magnetometer.The nanocomposite fibers consisting of ferrite(CoFe2O4) and perovskite(BaTiO3) are formed at the calcination temperature of 900 ℃ for 2 h.The average grain sizes of CoFe2O4 and BaTiO3 in the nanocomposite fibers increase from 25 to 65 nm with the calcination temperature from 900 to 1 180 ℃.The single fiber constructed from these nanograins of CoFe2O4 and BaTiO3 has a necklace-like morphology.The saturation magnetization of the nanocomposite 0.4CoFe2O4-0.6BaTiO3 fibers increases with the increase of CoFe2O4 grain size,while the coercivity reaches a maximum value when the average grain size of CoFe2O4 is around the critical single-domain size of 45 nm obtained at 1 000 ℃.The saturation magnetization and remanence of the nanocomposite xCoFe2O4-(1-x)BaTiO3(x=0.2,0.3,0.4,0.5) fibers almost exhibit a linear relationship with the molar fraction of CoFe2O4 in the nanocomposites.

Synthesis and microwave absorption properties of graphene-oxide(GO)/polyaniline nanocomposite with Fe_3O_4 particles

In order to investigate the impedance matching properties of microwave absorbers,the ternary nanocomposites of GO/PANI/Fe3O4（GPF） are prepared via a two-step method,GO/PANI composites are synthesized by dilute polymerization in the presence of aniline monomer and GO,and GO/PANI/Fe3O4 is prepared via a co-precipitation method.The obtained nanocomposites are characterized by scanning electron microscopy（SEM）,X-ray diffraction（XRD）,and Fourier transform infrared spectroscopy（FTIR）,respectively.The microwave absorbability reveals enhanced microwave absorption properties compared with GO,PANI,and GO/PANI.The maximum reflection loss of GO/PANI/Fe3O4 is up to-27 dB at 14 GHz with its thickness being 2 mm,and its absorption bandwidths exceeding-10 dB are more than 11.2 GHz with its thickness values being in the range from 1.5 mm-4 mm.It provides that GO/PANI/Fe3O4 can be used as an attractive candidate for microwave absorbers.

Preparation and Supercapacitive Properties of Fe_2O_3/Active Carbon Nanocomposites

Fe2O3/active carbon（Fe2O3/AC） nanocomposites were readily fabricated by pyrolyzing Fe3＋ impregnated active carbon in a nitrogen atmosphere. The as-prepared composites were studied by X-ray powder diffraction（XRD）, X-ray photoelectron spectroscopy（XPS） and transmission electron microscopy（TEM）. The capacitive property of the composites was investigated by cyclic voltammetry（CV） and galvanostatic charge-discharge test. Physical characterizations show that the γ-Fe2O3 fine grains dispersed in the AC well, with a mean size of 21.24 nm. Electrochemical tests in 6 mol/L KOH solutions indicate that the as-prepared nanocomposites exhibited improved capacitive properties. The specific capacitance（SC） of Fe2O3/AC nanocomposites was up to 188.4 F/g that was derived from both electrochemical double-layer capacitance and pseudo-capacitance, which was 78% larger than that of pristine AC. A symmetric capacitor with Fe2O3/AC nanocomposites as electrode showed an excellent cycling stability. The SC was only reduced by a factor of 9.2% after 2000 cycles at a current density of 1 A/g.

The design and fabrication of Co3O4/Co3V2O8/Ni nanocomposites as high-performance anodes for Li-ion batteries

The CoO/CoVO/Ni nanocomposites were rationally designed and prepared by a two-step hydrothermal synthesis and subsequent annealing treatment. The one-dimensional（1D） CoOnanowire arrays directly grew on Ni foam, whereas the 1D CoVOnanowires adhered to parts of CoOnanowires.Most of the hybrid nanowires were inlayed with each other, forming a 3D hybrid nanowires network.As a result, the discharge capacity of CoO/CoVO/Ni nanocomposites could reach 1201.8 mAh/g after100 cycles at 100 mA/g. After 600 cycles at 1 A/g, the discharge capacity was maintained at 828.1 mAh/g.Moreover, even though the charge/discharge rates were increased to 10 A/g, it rendered reversible capacity of 491.2 mAh/g. The superior electrochemical properties of nanocomposites were probably ascribed to their unique 3D architecture and the synergistic effects of two active materials. Therefore, such CoO/CoVO/Ni nanocomposites could potentially be used as anode materials for high-performance Li-ion batteries.

纳米四氧化三铁(Fe_3O_4)的制备和形貌

纳米Fe3O4因其特殊的理化性质及在生物医学领域潜在的应用而得到广泛研究。本文综述了纳米Fe3O4的制备方法,包括直流电弧等离子体法、热分解方法、沉淀法、水热法、电化学法、微乳液法、溶胶-凝胶法、有机物模板法、回流法等,结合作者在Fe3O4纳米粒子制备方面的最新工作,介绍了纳米Fe3O4的新颖形貌。对纳米级Fe3O4制备研究的发展趋势进行了展望。

不同形貌Fe_3O_4纳米粒子的氧化沉淀法制备与表征

用一种方法成功合成出了球体、四方体、八面体、不规则多面体、三角形和不规则颗粒等六种具有不同形貌的Fe3O4纳米粒子,通过扫描电子显微镜(SEM)表征了粒子形貌。试样经过X-射线衍射(XRD)表征具有尖晶石结构,且结晶良好。经震动样品磁强计(VSM)测定,各种形貌的Fe3O4纳米粒子都具有良好的磁性,其中八面体形貌的Fe3O4纳米粒子的饱和磁化强度达到86.56emu·g-1,剩磁为10.64emu·g-1,矫顽力为138Oe。讨论了不同形貌的Fe3O4纳米粒子的形成机制,得出了晶核的生长环境对纳米粒子的形貌有重要影响的结论。

纳米Fe_3O_4负载啤酒酵母菌对铀的吸附性能与机理

以纳米Fe3O4磁性微粒负载啤酒酵母菌,制备一种新型铀吸附剂,考察其吸附铀的主要影响因素,即溶液pH值、铀初始浓度、吸附剂投加量及其粒度,分析吸附过程的反应动力学和等温吸附规律,并用扫描电镜和能谱仪分析吸附机理。结果表明:纳米Fe3O4负载啤酒酵母菌(NFSC)吸附铀的最佳条件是pH值为7.0,铀初始浓度为60 mg/L,NFSC加入量为50 mg,NFSC的最佳粒径为12 nm。NFSC对铀的吸附动力学较好地符合准二级动力学模型,相关系数为0.999 6;吸附等温线均能符合Langmuir和Freundlich等温线模型,说明该吸附体系是一个单层覆盖与多层吸附相结合的模式。扫描电镜和能谱图表明:NFSC吸附铀后表面形态发生变化,且吸附过程中共存物理吸附和化学吸附,属于混合吸附类型。

磁性纳米TiO_2/SiO_2/Fe_3O_4光催化剂的制备及表征

以纳米Fe3O4磁粉为核心,采用溶胶-凝胶法制备了TiO2/SiO2/Fe3O4复合光催化剂。用XRD、TEM及元素分析对其结构和表面形貌进行了表征。以具有偶氮染料结构的甲基橙水溶液为目标反应物,评价其光催化活性。结果表明,所制TiO2/SiO2/Fe3O4样品为双层包覆型结构,SiO2为中间层,最外层是锐钛矿型的TiO2。该复合光催化剂对甲基橙溶液有较高的光催化活性,并具有可利用其磁性回收重用的特点,应用前景广泛。

强磁性Fe_3O_4纳米粒子的制备及其性能表征

采用共沉淀法在无N2气保护下制备了比饱和磁化强度达到75 9emu g的强磁性Fe3O4纳米粒子。在用NaOH溶液沉淀Fe3+和Fe2+混合溶液的过程中,考察了n(Fe2+)∶n(Fe3+)、晶化时间、晶化温度、总铁浓度和NaOH溶液浓度等条件对Fe3O4纳米粒子的粒径分布及磁性的影响。当n(Fe2+)∶n(Fe3+)=5 5∶1 0,晶化时间为2h,晶化温度为50℃时,Fe3O4纳米粒子磁性最佳。所制得的Fe3O4粒子为结晶完整、具有较高纯度和粒径分布均匀的立方体形纳米颗粒;其相变温度随着Fe3O4纳米粒子粒径的减小而降低。Fe3O4纳米粒子的等电点约为pH=7 2。

石墨烯-Fe@Fe_3O_4纳米复合材料的制备及其电磁性能研究

采用改进Hummers法制备氧化石墨,通过高温热膨胀剥离氧化石墨获得多层石墨烯,最后由羰基铁热分解法原位制备多层石墨烯-Fe@Fe3O4纳米复合材料。采用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、振动样品磁强计(VSM)以及矢量网络分析仪等对该复合材料的结构、形貌、电磁参数等进行了表征和测试。结果表明,石墨烯片层上附着了尺寸小于50 nm的球形Fe@Fe3O4颗粒;反射率损耗(RL)计算结果表明:以金属为衬底,当复合材料厚度为1.5 mm时,在10～16GHz范围内反射损耗均在-10 dB以下;当厚度为3 mm时,材料的反射损耗在4.3 GHz处达最大值,约为-25 dB。