Under different magnetic field intensities, the dependence of the permeability μ on temperature T(μ-T curve) for the Fe7.3Cu1Nb3Si13.5B9 alloy annealed at 350-620℃ was investigated. The results showed that the magn...Under different magnetic field intensities, the dependence of the permeability μ on temperature T(μ-T curve) for the Fe7.3Cu1Nb3Si13.5B9 alloy annealed at 350-620℃ was investigated. The results showed that the magnetic field intensity had a remarkable influence on the shape of μ-T curves. For amorphous alloy, the sharp Hopkinson peak of μ-T curve disappeared gradually with the increase of magnetic field intensity.展开更多
The ordering of the α-Fe(Si) crystallization phase in annealed Fe73.5Cu1Mo3Si13.5B9 alloy has been studied using XRD method. The α-Fe(Si) phase in Fe73.5Cu1Mo3Si13.5B9 alloy annealed at 460℃ for 1 h consists of th...The ordering of the α-Fe(Si) crystallization phase in annealed Fe73.5Cu1Mo3Si13.5B9 alloy has been studied using XRD method. The α-Fe(Si) phase in Fe73.5Cu1Mo3Si13.5B9 alloy annealed at 460℃ for 1 h consists of the DO3-type ordered region with spherical shape and disordered region. The size of DO3 ordered region increases with the annealing temperature. When the annealing temperature is 560℃, the size of the ordered region in the α-Fe(Si) grain is 14.0nm,which is nearly as large as that of the α-Fe(Si) grain (14.2 nm) and the degree of order of the α-Fe(Si) phase is about 0.78. When Fe73.5Cu1 Mo3Si13.5B9 amorphous alloy is annealed at 520℃， with the increment of the annealing time, the shape of the DO3 ordered region in the α-Fe(Si) phase is spheroidal at the beginning of the annealing and becomes spherical and has asize of 12.8 nm when the annealing time is 60 min. In addition, the DO3 superlattice lines of the α-Fe(Si) phase will vanish if Fe73.5Cu1Mo3Si13.5 B9 amorphous alloy is annealed for 1 h at 750℃.展开更多
High-frequency magnetic properties, such as core loss, coercivity and amplitude permeabilityof a newly-developed nanocrystalline Fe72.5Cu1Nb2V2Si13.5B9 alloy in the wide ranges of f =20-103 kHz, Bm = 0.01~0.6 T and Bm...High-frequency magnetic properties, such as core loss, coercivity and amplitude permeabilityof a newly-developed nanocrystalline Fe72.5Cu1Nb2V2Si13.5B9 alloy in the wide ranges of f =20-103 kHz, Bm = 0.01~0.6 T and Bmf = 10~40 (T.kHz) have been measured. A largeamount of experimental data have been fitted by a computer, thus obtaining several expressionsrepresenting the influence of frequency on high-frequency magnetic properties, that are useful inpractical applications.展开更多
The microstructure and the stability of Fe_73.5Cu_1Nb_3Si_13.5B_9 alloy at different stages of phase transformation were investigated through the observation of X-ray difraction and transmission electron microscopy an...The microstructure and the stability of Fe_73.5Cu_1Nb_3Si_13.5B_9 alloy at different stages of phase transformation were investigated through the observation of X-ray difraction and transmission electron microscopy and the measurement of magnetic aftereffect (MAE). It was found that the dependence of the volume fraction of amorphous phase and the MAE in the samples annealed from 450 to 700℃ on the annealing temperature is similar.展开更多
The synthetical soft magnetic properties including d.c. and a.c. magnetic properties and pulse magnetic property are reported for a newly-developed nanocrystalline Fe73.5Cu1 Nb1.5V1.5Si13.5B9 alloy The new alloy posse...The synthetical soft magnetic properties including d.c. and a.c. magnetic properties and pulse magnetic property are reported for a newly-developed nanocrystalline Fe73.5Cu1 Nb1.5V1.5Si13.5B9 alloy The new alloy possesses high d.c. relative initial permeability of 12.5×104 and low coerciv ity of 0.54 A/m. Under the conditions of Bm=0.3 T, f=100 kHz and Bm=0.2 T, f=200 kHz the core losses of the new alloy are 543 kW·m-3 and 834 kW.m-3, respectively which can be compa rable with those of nanocrystalline Fe73.5Cu1Nb3Si13.5B9 alloy. The analyses of core losses have been carried out in the wider range of f=20～104 kHz and Bm=0.0025～0.8 T and the approxi mate expression P(kW·m-3)=1.803 B:f1.77 has been obtained. The analyses of core losses in the range of f=20～104 kHz and Bmf=(10～40)×103(T.Hz) have shown that the core loss and the corresponding amplitude permeability roughly vary as P = 2.347×10-6(Bmf)1.97f-0.2231 and μa = 9.56× 105f-0.7464, respectively for the given product B.f. Some practical applica tions have also been mentioned.展开更多
用HP4294A型阻抗分析仪测量了经不同温度预退火后再540℃退火的Fe73.5Cu1Nb3S i13.5B9纳米晶合金薄带的巨磁阻抗,并结合XRD衍射图谱和AFM图谱,研究了预退火对纳米晶介观结构的影响.结果发现,200℃、300℃和400℃预退火处理40 m in对随后...用HP4294A型阻抗分析仪测量了经不同温度预退火后再540℃退火的Fe73.5Cu1Nb3S i13.5B9纳米晶合金薄带的巨磁阻抗,并结合XRD衍射图谱和AFM图谱,研究了预退火对纳米晶介观结构的影响.结果发现,200℃、300℃和400℃预退火处理40 m in对随后540℃退火的Fe73.5Cu1Nb3S i13.5B9薄带-αFe(S i)纳米晶介观结构产生了影响,颗粒团聚优势明显减弱,横向各向异性场减小,巨磁阻抗比得到了显著的提高.展开更多
基金This work was supported by the National Natural Science Foundation of China(No.59871013).
文摘Under different magnetic field intensities, the dependence of the permeability μ on temperature T(μ-T curve) for the Fe7.3Cu1Nb3Si13.5B9 alloy annealed at 350-620℃ was investigated. The results showed that the magnetic field intensity had a remarkable influence on the shape of μ-T curves. For amorphous alloy, the sharp Hopkinson peak of μ-T curve disappeared gradually with the increase of magnetic field intensity.
文摘The ordering of the α-Fe(Si) crystallization phase in annealed Fe73.5Cu1Mo3Si13.5B9 alloy has been studied using XRD method. The α-Fe(Si) phase in Fe73.5Cu1Mo3Si13.5B9 alloy annealed at 460℃ for 1 h consists of the DO3-type ordered region with spherical shape and disordered region. The size of DO3 ordered region increases with the annealing temperature. When the annealing temperature is 560℃, the size of the ordered region in the α-Fe(Si) grain is 14.0nm,which is nearly as large as that of the α-Fe(Si) grain (14.2 nm) and the degree of order of the α-Fe(Si) phase is about 0.78. When Fe73.5Cu1 Mo3Si13.5B9 amorphous alloy is annealed at 520℃， with the increment of the annealing time, the shape of the DO3 ordered region in the α-Fe(Si) phase is spheroidal at the beginning of the annealing and becomes spherical and has asize of 12.8 nm when the annealing time is 60 min. In addition, the DO3 superlattice lines of the α-Fe(Si) phase will vanish if Fe73.5Cu1Mo3Si13.5 B9 amorphous alloy is annealed for 1 h at 750℃.
文摘High-frequency magnetic properties, such as core loss, coercivity and amplitude permeabilityof a newly-developed nanocrystalline Fe72.5Cu1Nb2V2Si13.5B9 alloy in the wide ranges of f =20-103 kHz, Bm = 0.01~0.6 T and Bmf = 10~40 (T.kHz) have been measured. A largeamount of experimental data have been fitted by a computer, thus obtaining several expressionsrepresenting the influence of frequency on high-frequency magnetic properties, that are useful inpractical applications.
基金National Natural &ience Foundation of China!(No. 59671020).
文摘The microstructure and the stability of Fe_73.5Cu_1Nb_3Si_13.5B_9 alloy at different stages of phase transformation were investigated through the observation of X-ray difraction and transmission electron microscopy and the measurement of magnetic aftereffect (MAE). It was found that the dependence of the volume fraction of amorphous phase and the MAE in the samples annealed from 450 to 700℃ on the annealing temperature is similar.
文摘The synthetical soft magnetic properties including d.c. and a.c. magnetic properties and pulse magnetic property are reported for a newly-developed nanocrystalline Fe73.5Cu1 Nb1.5V1.5Si13.5B9 alloy The new alloy possesses high d.c. relative initial permeability of 12.5×104 and low coerciv ity of 0.54 A/m. Under the conditions of Bm=0.3 T, f=100 kHz and Bm=0.2 T, f=200 kHz the core losses of the new alloy are 543 kW·m-3 and 834 kW.m-3, respectively which can be compa rable with those of nanocrystalline Fe73.5Cu1Nb3Si13.5B9 alloy. The analyses of core losses have been carried out in the wider range of f=20～104 kHz and Bm=0.0025～0.8 T and the approxi mate expression P(kW·m-3)=1.803 B:f1.77 has been obtained. The analyses of core losses in the range of f=20～104 kHz and Bmf=(10～40)×103(T.Hz) have shown that the core loss and the corresponding amplitude permeability roughly vary as P = 2.347×10-6(Bmf)1.97f-0.2231 and μa = 9.56× 105f-0.7464, respectively for the given product B.f. Some practical applica tions have also been mentioned.
