The composites of Ce-Co-based alloys doped with La content were fabricated via a vacuum arc melting method.The influences of La addition on microstructure,electromagnetic parameters,magnetic property and microwave abs...The composites of Ce-Co-based alloys doped with La content were fabricated via a vacuum arc melting method.The influences of La addition on microstructure,electromagnetic parameters,magnetic property and microwave absorbing property were measured by the corresponding equipment.The morphology characteristics manifest that all samples display sheet structure,and the average particle size of alloy powders increases with increasing La content The saturation magnetization(MS) decreases with increasing La addition as a whole.The minimum reflection loss(RL) of La0.4Ce1.6Co17 alloy powder about-42.29 dB can be obtained about-42.29 dB at 7.84 GHz with the matching thickness of 1.8 mm,and the corresponding effective bandwidth can achieve about 2.24 GHz.In addition,the minimum RL frequency moves towards a lower frequency region as the La content increases.The minimum RL of La0.3Ce1.7Co17alloy powder is less than-20 dB ranging from 1.2 to 2.4 mm in the whole 4-16 GHz.The maximum bandwidth can reach about 4.88 GHz at the given thickness of 1.2 mm.In general,these all indicate that the La addition is beneficial to improving the microwave absorbing performance in both effective bandwidth and absorption intensity.展开更多
The ErxHo（2-x）Fe（17）（x = 0.0, 0.1,0.2, 0.3, 0.4） powders were prepared by arc melting and high energy ball milling method. The influence of the Er substitution on phase structure, morphology, saturation magnetiz...The ErxHo（2-x）Fe（17）（x = 0.0, 0.1,0.2, 0.3, 0.4） powders were prepared by arc melting and high energy ball milling method. The influence of the Er substitution on phase structure, morphology, saturation magnetization,electromagnetic parameters was investigated by X-ray diffraction（XRD）,scanning electron microscopy（SEM）, vibrating sample magnetometer（VSM） and vector network analyzer（VNA）,respectively. The results show that the saturation magnetization increases and the average particle size increases with the increase of Er content. The minimum absorption peak frequency shifts towards a lower frequency region with the increase of Er content. The ErxHo2-xFe17 powder can achieve the minimum RL of-24.07 dB at 6.96 GHz with a thickness of 2.0 mm and the minimum RL is less than-20 dB at the thickness range from 2.0 to 3.0 mm. The minimum RL of ErxHo2-xFe17 is-37.26 dB at5.68 GHz and the frequency bandwidth of R〈-10 dB reaches about 1.2 GHz with a thickness of 2.4 mm.And the microwave absorbing properties of the composite with different weight ratios of Er0.3Ho1.7Fe17/graphene were researched. The microwave absorbing peaks of the composite shift to lower frequency with the increase of graphene content. The values of the minimum RL of ErxHo2-xFe17/graphene are close to-10 dB with absorbing coating thicknesses increased.展开更多
In order to increase the absorbing ability and expand the absorbing bandwidth, ZnO and FeNiMo particles were established as absorbers, and wax as adhesive, and the electromagnetic parameters were tested using a vector...In order to increase the absorbing ability and expand the absorbing bandwidth, ZnO and FeNiMo particles were established as absorbers, and wax as adhesive, and the electromagnetic parameters were tested using a vector network analyzer, then the absorbing properties were calculated by means of transmission line theory. The ZnO/FeNiMo composite has excellent microwave absorption properties of a minimum reflection loss value-27.8 dB at 15.98 GHz for a thickness of 1.5 mm and a broad absorption bandwidth of 13.46–18 GHz（RL 〈-10 dB）.展开更多
基金Project supported by the National Natural Science Foundation of China (51361007)2017 Director Fund of Guangxi Key Laboratory of Wireless Wideband Communication and Signal Processing (GXKL06170107)。
文摘The composites of Ce-Co-based alloys doped with La content were fabricated via a vacuum arc melting method.The influences of La addition on microstructure,electromagnetic parameters,magnetic property and microwave absorbing property were measured by the corresponding equipment.The morphology characteristics manifest that all samples display sheet structure,and the average particle size of alloy powders increases with increasing La content The saturation magnetization(MS) decreases with increasing La addition as a whole.The minimum reflection loss(RL) of La0.4Ce1.6Co17 alloy powder about-42.29 dB can be obtained about-42.29 dB at 7.84 GHz with the matching thickness of 1.8 mm,and the corresponding effective bandwidth can achieve about 2.24 GHz.In addition,the minimum RL frequency moves towards a lower frequency region as the La content increases.The minimum RL of La0.3Ce1.7Co17alloy powder is less than-20 dB ranging from 1.2 to 2.4 mm in the whole 4-16 GHz.The maximum bandwidth can reach about 4.88 GHz at the given thickness of 1.2 mm.In general,these all indicate that the La addition is beneficial to improving the microwave absorbing performance in both effective bandwidth and absorption intensity.
文摘针对目前水泥基吸波材料带宽窄、吸收率低、而且制备成本高的问题,选用铁尾矿与钢渣固废资源为胶凝填充材料,利用钢纤维作为吸波剂制得电磁波吸收复合材料。采用矢量网络分析仪测定复合材料在0.1~5 GHz范围内的相对复介电常数与复磁导率,计算得到其电磁波损耗系数与反射率,并制备不同厚度样品分析了复合材料的电磁波吸收机理。研究表明:铁尾矿与钢渣中的磁性矿物相组分能显著提升材料的电导能力,影响电磁参数,提升介电损耗与磁损耗能力;增加钢纤维吸波剂的使用量能够降低与之匹配复合材料的最小厚度,当铁尾矿、钢渣掺量分别为10%、30%,钢纤维体积比为0.5%时,制备出的15 mm厚度复合吸波材料最小反射率达到-46.863 d B,有效带宽占比18.8%。
基金supported by the National Natural Science Foundation of China(51361007)Guangxi Natural Science Foundation(2014GXNSFAA118317)+2 种基金Scientific Research Project of Guangxi Education Department(YB2014139)Innovation Project of GUET Graduate Education(YJCXS 201566)Guangxi Key Laboratory of Information Materials(131010-Z)
文摘The ErxHo（2-x）Fe（17）（x = 0.0, 0.1,0.2, 0.3, 0.4） powders were prepared by arc melting and high energy ball milling method. The influence of the Er substitution on phase structure, morphology, saturation magnetization,electromagnetic parameters was investigated by X-ray diffraction（XRD）,scanning electron microscopy（SEM）, vibrating sample magnetometer（VSM） and vector network analyzer（VNA）,respectively. The results show that the saturation magnetization increases and the average particle size increases with the increase of Er content. The minimum absorption peak frequency shifts towards a lower frequency region with the increase of Er content. The ErxHo2-xFe17 powder can achieve the minimum RL of-24.07 dB at 6.96 GHz with a thickness of 2.0 mm and the minimum RL is less than-20 dB at the thickness range from 2.0 to 3.0 mm. The minimum RL of ErxHo2-xFe17 is-37.26 dB at5.68 GHz and the frequency bandwidth of R〈-10 dB reaches about 1.2 GHz with a thickness of 2.4 mm.And the microwave absorbing properties of the composite with different weight ratios of Er0.3Ho1.7Fe17/graphene were researched. The microwave absorbing peaks of the composite shift to lower frequency with the increase of graphene content. The values of the minimum RL of ErxHo2-xFe17/graphene are close to-10 dB with absorbing coating thicknesses increased.
基金financially supported by the National Natural Science Foundation of China (No. 60961001)the National Natural Science Fund Committee and the China Academy of Engineering Physics United Fund (No. 11076016)
文摘In order to increase the absorbing ability and expand the absorbing bandwidth, ZnO and FeNiMo particles were established as absorbers, and wax as adhesive, and the electromagnetic parameters were tested using a vector network analyzer, then the absorbing properties were calculated by means of transmission line theory. The ZnO/FeNiMo composite has excellent microwave absorption properties of a minimum reflection loss value-27.8 dB at 15.98 GHz for a thickness of 1.5 mm and a broad absorption bandwidth of 13.46–18 GHz（RL 〈-10 dB）.
