The solid solution and aging treatment for conventional manufacturing processes might not be suitable for laser additive manufactured titanium alloys due to the different lamellar microstructures.In this study,the inf...The solid solution and aging treatment for conventional manufacturing processes might not be suitable for laser additive manufactured titanium alloys due to the different lamellar microstructures.In this study,the influence of aging temperatures(600,700 and 800°C)on microstructure and mechanical properties of titanium alloy Ti-6Al-2V-1.5Mo-0.5Zr-0.3Si was investigated.The results indicate that after solid solution treatment at 970°C followed by water quenching,the alloy mainly consists of coarsening lamellar a phase in martensite α' matrix.Aging at 600°C will not change the size of primary lamellar α phase but lead to huge amount of secondary a phases(α_(s))generating with very fine microstructure.By increasing the aging temperature,the number of α_(s) decreases but with coarsened microstructures.When aged at 800°C,the width of the asphase reaches 350 nm,almost 7 times wider than that aged at 600°C.The changing size of α_(s) obviously influences the property of the alloy.The fine α_(s) leads to high strength and microhardness but low plasticity,and specimen aged at 700°C with suitable assize has the best comprehensive properties.展开更多
基金financially supported by the Beijing Municipal Science and Technology Project(No.Z171100000817002)the Young Elite Scientist Sponsorship Program by CAST and the National Key Research and Development Program of China(No.2016YFB1100401)。
文摘The solid solution and aging treatment for conventional manufacturing processes might not be suitable for laser additive manufactured titanium alloys due to the different lamellar microstructures.In this study,the influence of aging temperatures(600,700 and 800°C)on microstructure and mechanical properties of titanium alloy Ti-6Al-2V-1.5Mo-0.5Zr-0.3Si was investigated.The results indicate that after solid solution treatment at 970°C followed by water quenching,the alloy mainly consists of coarsening lamellar a phase in martensite α' matrix.Aging at 600°C will not change the size of primary lamellar α phase but lead to huge amount of secondary a phases(α_(s))generating with very fine microstructure.By increasing the aging temperature,the number of α_(s) decreases but with coarsened microstructures.When aged at 800°C,the width of the asphase reaches 350 nm,almost 7 times wider than that aged at 600°C.The changing size of α_(s) obviously influences the property of the alloy.The fine α_(s) leads to high strength and microhardness but low plasticity,and specimen aged at 700°C with suitable assize has the best comprehensive properties.
