FePt （50 nm） and [FePt（a nm）/MgO（b nm）5/glass （a=1, 2, 3; b=1, 2, 3） films were prepared by radio frequency （RF） magnetron sputtering technique, and then were annealed at 600℃ for 30 min. The effect of MgO ...FePt （50 nm） and [FePt（a nm）/MgO（b nm）5/glass （a=1, 2, 3; b=1, 2, 3） films were prepared by radio frequency （RF） magnetron sputtering technique, and then were annealed at 600℃ for 30 min. The effect of MgO layer thickness on the structures and magnetic properties of the FePt/MgO multilayers was investigated. The coercivities and inter-grain interactions of the FePt/MgO films were decreased, yet the degree of （001） texturing drastically increased with the increase in MgO layer thickness when the FePt layer thickness was fixed. Thus, the FePt/MgO films with appropriate coercivities, high perpendicular anisotropy, and weak intergrain interactions were obtained by controlling the MgO layer thickness. Overall, these results indicate that the FePt/MgO nanostructured films are promising candidates for future high-density perpendicular recording media.展开更多
[FePt/Ag]n multilayers were deposited on glass substrates by RF magnetron sputtering and ex situ annealed at 550℃ for 30 min. The effects of inserted Ag layer thickness and the number of bilayer repetitions （n） on ...[FePt/Ag]n multilayers were deposited on glass substrates by RF magnetron sputtering and ex situ annealed at 550℃ for 30 min. The effects of inserted Ag layer thickness and the number of bilayer repetitions （n） on the structure and magnetic properties of the multilayers were investigated. It was found that the difference between in-plane and out-of-plane coercivities varied with an increase of inserted Ag layer thickness in the [FePt 2 nm/Ag x nm]10 multilayers. The ratio of out-of-plane coercivity to in-plane coercivity reached the maximum value with the Ag layer thickness of 5 nm, indicating that the Ag layer thickness plays an important role in obtaining perpendicular orientation. For the [FePt 2 nm/Ag 5 um]n multilayers, perpendicular orientation is also influenced by n. The maximum value of the ratio of out-of-plane coercivity to in-plane coercivity appeared when n was given as 8. It was found that the [FePt 2 nm/Ag 5 nm]8 had a high perpendicular coercivity of 520 kA/m and a low in-plane one of 88 kA/m, which shows a strong perpendicular anisotropy.展开更多
The Fe/Pt multilayer films with different structures were deposited by RF magnetron sputtering on glass substrates, and the L10-FePt films were obtained after the asdeposited samples were subjected to vacuum annealing...The Fe/Pt multilayer films with different structures were deposited by RF magnetron sputtering on glass substrates, and the L10-FePt films were obtained after the asdeposited samples were subjected to vacuum annealing at various temperatures. Results show that the Fe/Pt multilayer structure can effectively reduce the ordering temperature of FePt film, and the in-plane coercivity of [Fe （5.2 nm）/Pt （5.2 nm）]7 multilayers can reach 161.2 kA/m after annealed at 350℃ for 30 min. When Fe and Pt layer thickness is equal, the coercivity of the film is the largest. On the other hand, the different Fe-Pt crystalline phases such as Fe3Pt and FePt3 phases are formed after annealing when the thickness ratio of Fe/Pt deviates from 1 after annealing. When Fe and Pt have the same thickness, the thinner single layer gets the lower ordering temperature and the larger coercivity.展开更多
The dependence of perpendicular magnetic anisotropy （PMA） on the barrier layer MgO thickness in MgO/CoFeB /Ta multilayers is investigated. The results show that the strongest PMA occurs in a small window of about 2 ...The dependence of perpendicular magnetic anisotropy （PMA） on the barrier layer MgO thickness in MgO/CoFeB /Ta multilayers is investigated. The results show that the strongest PMA occurs in a small window of about 2 4nm with the increase of MgO thickness from 1-1Onto. The crystalline degree of MgO and the change of interatomic distance along the out-of-plane direction may be the main reasons for the change of PMA in these multilayers. Moreover, the roughnesses of 2- and 4-nm-thick MgO samples are 3.163 and 1.8 nm, respectively, and both the samples show PMA. These results could be used to tune the magnetic characteristic of the ultra thin CoFeB film for future applications in perpendicular magnetic devices.展开更多
Magnetic skyrmions in multilayer structures are considered as a new direction for the next generation of storage due to their small size,strong anti-interference ability,high current-driven mobility,and compatibility ...Magnetic skyrmions in multilayer structures are considered as a new direction for the next generation of storage due to their small size,strong anti-interference ability,high current-driven mobility,and compatibility with existing spintronic technology.In this work,we present a tunable room temperature skyrmion platform based on multilayer stacks of MgO/FeNiB/Mo.We systematically studied the creation of magnetic skyrmions in MgO/FeNiB/Mo multilayer structures with perpendicular magnetic anisotropy(PMA).In these structures,the magnetic anisotropy changes from PMA to in-plane magnetic anisotropy(IMA)as the thickness of FeNiB layer increases.By adjusting the applied magnetic field and electric current,stable and high-density skyrmions can be obtained in the material system.The discovery of this material broadens the exploration of new materials for skyrmion and promotes the development of spintronic devices based on skyrmions.展开更多
[SiO2/FePt]5/Ag thin films were deposited by RF magnetron sputtering on the glass substrates and post annealing at 550 ℃ for 30 min in vacuum. Vibrating sample magnetometer and X-ray diffraction analyser were applied...[SiO2/FePt]5/Ag thin films were deposited by RF magnetron sputtering on the glass substrates and post annealing at 550 ℃ for 30 min in vacuum. Vibrating sample magnetometer and X-ray diffraction analyser were applied to study the magnetic properties and microstructures of the films. The results show that without Ag underlayer [SiO2/FePt]5 films deposited onto the glass are FCC disordered; with the addition of Ag underlayer [SiO]FePt]5/Ag films are changed into L10 and （111） mixed texture. The variation of the SiO2 nonmagnetic layer thickness in [SiO2/FePt]5/Ag films indicates that SiO2-doping plays an important role in improving the order parameter and the perpendicular magnetic anisotropy, and reducing the grain size and intergrain interactions. By controlling SiO2 thickness the highly perpendicular magnetic anisotropy can be obtained in the [SiO2 （0.6 nm）/FePt （3 nm）]5/Ag （50 nm） films and highly （001）-oriented films can be obtained in the [SiO2 （2 nm）/FePt （3 nm）]5/Ag （50 nm） films.展开更多
FePt thin films and [FePt/Ag]n multilayer thin films were prepared by magnetron sputtering technique and subsequent annealing process. By comparing the microstructure and magnetic properties of these two kinds of thin...FePt thin films and [FePt/Ag]n multilayer thin films were prepared by magnetron sputtering technique and subsequent annealing process. By comparing the microstructure and magnetic properties of these two kinds of thin films, effects of Ag addition on the structure and properties of FePt thin films were investigated. Proper Ag addition was found helpful for FePt phase transition at lower annealing temperature. With Ag addition, the magnetic domain pattern of FePt thin film changed from maze-like pattern to more discrete island-like domain pattern in [FePt/Ag]n multilayer thin films. In addition, introducing nonmagnetic Ag hindered FePt grains from growing larger. The in-depth defects in FePt films and [FePt/Ag]n multilayer films verify that Ag addition is attributed to a large number of pinning site defects in [FePt/Ag]n film and therefore has effects on its magnetic properties and microstructure.展开更多
The effects of Ag layers with different locations and thicknesses on the structural and magnetic property of SiO2/FePt multilayer films were investigated.The non-magnetic Ag layer plays an important role in inducing（...The effects of Ag layers with different locations and thicknesses on the structural and magnetic property of SiO2/FePt multilayer films were investigated.The non-magnetic Ag layer plays an important role in inducing（001） orientation and ordering of FePt grains,as well as the SiO2-doping reducing the grain size and the magnetic exchange coupling between grains.When the 10 nm Ag layer is moved from the bottom to the top of the SiO2/FePt multilayer film,the coercivity gradually decreases;the largest difference between the out-of-plane coercivity and the in-plane one is obtained in the sample of [SiO2（2 nm）/FePt（3 nm）]3/Ag（10 nm）/[SiO2（2 nm）/FePt（3 nm）]2.Furthermore,the location of Ag layers was fixed and the thickness was changed.The XRD curves suggest that the intensity of the（001） peak becomes the strongest with the addition of 10 nm Ag layers.展开更多
FePt/Ag]10 multilayers were deposited on glass substrates by magnetron sputtering. After being annealed at 550℃ for 30 min, the coercivities of [FePt/Ag]10 multilayer films were observably improved. Magnetic properti...FePt/Ag]10 multilayers were deposited on glass substrates by magnetron sputtering. After being annealed at 550℃ for 30 min, the coercivities of [FePt/Ag]10 multilayer films were observably improved. Magnetic properties of [FePt/Ag]10multilayer films are influenced by the Ag content. The highest coercivity is obtained for those multilayer films that the Ag content is about 25%. The analysis for the re- manence curves shows that the lower FePt layer thickness is favorable for decreasing the intergranular interaction. Re- sult of XRD shows that a thick Ag layer can enhance the intensity of FePt(001) peak. A magnetic activation volume of the order of 10?24 m3 is obtained by the measurement of magnetic viscosity, showing that it is promising to be ultra- high density recording media.展开更多
L10 FePt films were deposited on MgO (001) substrates heated to 700°C by magnetron sputtering.Assisted by the misfit of lattice between film and substrate,strong (001) texture was formed.The film at nominal thick...L10 FePt films were deposited on MgO (001) substrates heated to 700°C by magnetron sputtering.Assisted by the misfit of lattice between film and substrate,strong (001) texture was formed.The film at nominal thickness t N=5 nm was composed of nanoparticles with a size of～70 nm,and showed a high coercivity of～105 kOe at 4.2 K.At t N=～50 nm,as the film changed from discontinuous to continuous,the coercivity dropped about one order of magnitude.Micromagnetic simulation implies that the magnetization reversal is a vortex-like nuclear type.The ideal coercivity of a separated single-domain L10 FePt nanoparticle with a size of 70 nm×70 nm×5 nm is～121 kOe.This tells us that the experimental coercivity has nearly reached the limit of ideal single crystalline nanoparticles.展开更多
基金This work was financially supported by the National Natural Science Foundation of China (No.10574085)the Opening Foundation of the Key Laboratory of Shanxi Province (200503010)the Key Project of the Ministry of Education of China (No.207020).
文摘FePt （50 nm） and [FePt（a nm）/MgO（b nm）5/glass （a=1, 2, 3; b=1, 2, 3） films were prepared by radio frequency （RF） magnetron sputtering technique, and then were annealed at 600℃ for 30 min. The effect of MgO layer thickness on the structures and magnetic properties of the FePt/MgO multilayers was investigated. The coercivities and inter-grain interactions of the FePt/MgO films were decreased, yet the degree of （001） texturing drastically increased with the increase in MgO layer thickness when the FePt layer thickness was fixed. Thus, the FePt/MgO films with appropriate coercivities, high perpendicular anisotropy, and weak intergrain interactions were obtained by controlling the MgO layer thickness. Overall, these results indicate that the FePt/MgO nanostructured films are promising candidates for future high-density perpendicular recording media.
基金This work is financially supported by the National Natural Science Foundation of China (No. 10574085) Natural Science Foundation ofShanxi Province, China (No. 20041032).
文摘[FePt/Ag]n multilayers were deposited on glass substrates by RF magnetron sputtering and ex situ annealed at 550℃ for 30 min. The effects of inserted Ag layer thickness and the number of bilayer repetitions （n） on the structure and magnetic properties of the multilayers were investigated. It was found that the difference between in-plane and out-of-plane coercivities varied with an increase of inserted Ag layer thickness in the [FePt 2 nm/Ag x nm]10 multilayers. The ratio of out-of-plane coercivity to in-plane coercivity reached the maximum value with the Ag layer thickness of 5 nm, indicating that the Ag layer thickness plays an important role in obtaining perpendicular orientation. For the [FePt 2 nm/Ag 5 um]n multilayers, perpendicular orientation is also influenced by n. The maximum value of the ratio of out-of-plane coercivity to in-plane coercivity appeared when n was given as 8. It was found that the [FePt 2 nm/Ag 5 nm]8 had a high perpendicular coercivity of 520 kA/m and a low in-plane one of 88 kA/m, which shows a strong perpendicular anisotropy.
基金supported by the National Natural Science Foundation of China(No.60571010)Natural Science Foundation of Hubei province.
文摘The Fe/Pt multilayer films with different structures were deposited by RF magnetron sputtering on glass substrates, and the L10-FePt films were obtained after the asdeposited samples were subjected to vacuum annealing at various temperatures. Results show that the Fe/Pt multilayer structure can effectively reduce the ordering temperature of FePt film, and the in-plane coercivity of [Fe （5.2 nm）/Pt （5.2 nm）]7 multilayers can reach 161.2 kA/m after annealed at 350℃ for 30 min. When Fe and Pt layer thickness is equal, the coercivity of the film is the largest. On the other hand, the different Fe-Pt crystalline phases such as Fe3Pt and FePt3 phases are formed after annealing when the thickness ratio of Fe/Pt deviates from 1 after annealing. When Fe and Pt have the same thickness, the thinner single layer gets the lower ordering temperature and the larger coercivity.
基金Supported by the National Basic Research Program of China under Grant No 2011CB921804the Beijing Key Subject Foundation of Condensed Matter Physics under Grant No 0114023
文摘The dependence of perpendicular magnetic anisotropy （PMA） on the barrier layer MgO thickness in MgO/CoFeB /Ta multilayers is investigated. The results show that the strongest PMA occurs in a small window of about 2 4nm with the increase of MgO thickness from 1-1Onto. The crystalline degree of MgO and the change of interatomic distance along the out-of-plane direction may be the main reasons for the change of PMA in these multilayers. Moreover, the roughnesses of 2- and 4-nm-thick MgO samples are 3.163 and 1.8 nm, respectively, and both the samples show PMA. These results could be used to tune the magnetic characteristic of the ultra thin CoFeB film for future applications in perpendicular magnetic devices.
基金Project supported by the National Basic Research Program of China (Grant No.2015CB921403)the National Key Research and Development Program of China (Grant No.2016YFA0300804)+2 种基金the National Natural Science Foundation of China (Grant Nos.51871236,11874408,51431009,92263202,and 51971240)the Science Center of the National Science Foundation of China (Grant No.52088101)the Strategic Priority Research Program (B,Grant No.XDB33030200)of the Chinese Academy of Sciences (CAS)。
文摘Magnetic skyrmions in multilayer structures are considered as a new direction for the next generation of storage due to their small size,strong anti-interference ability,high current-driven mobility,and compatibility with existing spintronic technology.In this work,we present a tunable room temperature skyrmion platform based on multilayer stacks of MgO/FeNiB/Mo.We systematically studied the creation of magnetic skyrmions in MgO/FeNiB/Mo multilayer structures with perpendicular magnetic anisotropy(PMA).In these structures,the magnetic anisotropy changes from PMA to in-plane magnetic anisotropy(IMA)as the thickness of FeNiB layer increases.By adjusting the applied magnetic field and electric current,stable and high-density skyrmions can be obtained in the material system.The discovery of this material broadens the exploration of new materials for skyrmion and promotes the development of spintronic devices based on skyrmions.
基金Project(10574085) supported by the National Natural Science Foundation of ChinaProject(207020) supported by the Science Technology Key Project of the Ministry of Education, China
文摘[SiO2/FePt]5/Ag thin films were deposited by RF magnetron sputtering on the glass substrates and post annealing at 550 ℃ for 30 min in vacuum. Vibrating sample magnetometer and X-ray diffraction analyser were applied to study the magnetic properties and microstructures of the films. The results show that without Ag underlayer [SiO2/FePt]5 films deposited onto the glass are FCC disordered; with the addition of Ag underlayer [SiO]FePt]5/Ag films are changed into L10 and （111） mixed texture. The variation of the SiO2 nonmagnetic layer thickness in [SiO2/FePt]5/Ag films indicates that SiO2-doping plays an important role in improving the order parameter and the perpendicular magnetic anisotropy, and reducing the grain size and intergrain interactions. By controlling SiO2 thickness the highly perpendicular magnetic anisotropy can be obtained in the [SiO2 （0.6 nm）/FePt （3 nm）]5/Ag （50 nm） films and highly （001）-oriented films can be obtained in the [SiO2 （2 nm）/FePt （3 nm）]5/Ag （50 nm） films.
基金the National Natural Science Foundation of China (No. 60571010)the Open Foundation of the Key Laboratory of Ferroelectric and Piezoelectric Materials and Devices of Hubei Province in Hubei University
文摘FePt thin films and [FePt/Ag]n multilayer thin films were prepared by magnetron sputtering technique and subsequent annealing process. By comparing the microstructure and magnetic properties of these two kinds of thin films, effects of Ag addition on the structure and properties of FePt thin films were investigated. Proper Ag addition was found helpful for FePt phase transition at lower annealing temperature. With Ag addition, the magnetic domain pattern of FePt thin film changed from maze-like pattern to more discrete island-like domain pattern in [FePt/Ag]n multilayer thin films. In addition, introducing nonmagnetic Ag hindered FePt grains from growing larger. The in-depth defects in FePt films and [FePt/Ag]n multilayer films verify that Ag addition is attributed to a large number of pinning site defects in [FePt/Ag]n film and therefore has effects on its magnetic properties and microstructure.
基金supported by the National Natural Science Foundation of China(Nos.10574085 and 60776008)the Science Technology Key Project of the Ministry of Education of China(No.207020).
文摘The effects of Ag layers with different locations and thicknesses on the structural and magnetic property of SiO2/FePt multilayer films were investigated.The non-magnetic Ag layer plays an important role in inducing（001） orientation and ordering of FePt grains,as well as the SiO2-doping reducing the grain size and the magnetic exchange coupling between grains.When the 10 nm Ag layer is moved from the bottom to the top of the SiO2/FePt multilayer film,the coercivity gradually decreases;the largest difference between the out-of-plane coercivity and the in-plane one is obtained in the sample of [SiO2（2 nm）/FePt（3 nm）]3/Ag（10 nm）/[SiO2（2 nm）/FePt（3 nm）]2.Furthermore,the location of Ag layers was fixed and the thickness was changed.The XRD curves suggest that the intensity of the（001） peak becomes the strongest with the addition of 10 nm Ag layers.
文摘FePt/Ag]10 multilayers were deposited on glass substrates by magnetron sputtering. After being annealed at 550℃ for 30 min, the coercivities of [FePt/Ag]10 multilayer films were observably improved. Magnetic properties of [FePt/Ag]10multilayer films are influenced by the Ag content. The highest coercivity is obtained for those multilayer films that the Ag content is about 25%. The analysis for the re- manence curves shows that the lower FePt layer thickness is favorable for decreasing the intergranular interaction. Re- sult of XRD shows that a thick Ag layer can enhance the intensity of FePt(001) peak. A magnetic activation volume of the order of 10?24 m3 is obtained by the measurement of magnetic viscosity, showing that it is promising to be ultra- high density recording media.
基金supported by Chongqing Natural Science Foundation(Grant No.CSTC2009BB8102)Southwest University Doctorial Foundation (Grant No.SWUB2006031)
文摘L10 FePt films were deposited on MgO (001) substrates heated to 700°C by magnetron sputtering.Assisted by the misfit of lattice between film and substrate,strong (001) texture was formed.The film at nominal thickness t N=5 nm was composed of nanoparticles with a size of～70 nm,and showed a high coercivity of～105 kOe at 4.2 K.At t N=～50 nm,as the film changed from discontinuous to continuous,the coercivity dropped about one order of magnitude.Micromagnetic simulation implies that the magnetization reversal is a vortex-like nuclear type.The ideal coercivity of a separated single-domain L10 FePt nanoparticle with a size of 70 nm×70 nm×5 nm is～121 kOe.This tells us that the experimental coercivity has nearly reached the limit of ideal single crystalline nanoparticles.
