The effect of Zr on tensile property, microstructure and fracture behaviour of cast Ni 3Al based alloy strengthened with carbides has been studied. It was found that Zr distributes at interdendrites and grain boundar...The effect of Zr on tensile property, microstructure and fracture behaviour of cast Ni 3Al based alloy strengthened with carbides has been studied. It was found that Zr distributes at interdendrites and grain boundaries in the form of ZrC particle and Ni 5Zr eutectic phase which can refine microstructure. Ni 5Zr phase can alleviate the crack initiation at grain boundaries and dendrite boundaries, which helps deformation to be harmonical between matrix and precipitates at elevated temperature.展开更多
The effect of hot-rolling processing on microstructure as well as the relationship between the elongated grain structure and tensile properties are investigated. The results indicate that the elongated grain structure...The effect of hot-rolling processing on microstructure as well as the relationship between the elongated grain structure and tensile properties are investigated. The results indicate that the elongated grain structure influences the tensile properties and creep rupture life of Fe3Al alloy significantly. For the better strength and ductility at RT,a thinner elongated grain structure is desirable. When the elongated grain size is increased, the tensile properties will be decreased. On the other hand, the creeP rupture life at 600℃ is increased with the increase of elongated grain size.展开更多
The effect of homogenization on the hardness,tensile properties,electrical conductivity and microstructure of as-cast Al-6Mg-0.4Mn-0.25Sc-0.12Zr alloy was studied.The results show that during homogenization as-cast st...The effect of homogenization on the hardness,tensile properties,electrical conductivity and microstructure of as-cast Al-6Mg-0.4Mn-0.25Sc-0.12Zr alloy was studied.The results show that during homogenization as-cast studied alloy has obviously hardening effect that is similar to aging hardening behavior in traditional Al alloys.The precipitates are mainly Al3(Sc,Zr)and Al6Mn.When homogenization temperature increases the hardness peak value is declined and the time corresponding to hardness peak value is shortened.The electrical conductivity of the alloy monotonously increases with increasing homogenization temperature and time.The decomposition of the supersaturated solid solution containing Sc and Zr which is formed during direct chilling casting and the precipitation of Al3(Sc,Zr)cause hardness increasing.The depletion of the matrix solid solubility decreases the ability of electron scattering in the alloy,resulting in the electrical conductivity increased.Tensile property result at hot rolling state shows that the optimal homogenization treatment processing is holding at 300-350 ℃ for 6-8 h.展开更多
The effect of alloying element such as Mo,Si or B and its stoichoimetric composition on the tensile properties at room and elevated temperatures,and also on the microstructure of Fe_3Al and FeAl alloys has been invest...The effect of alloying element such as Mo,Si or B and its stoichoimetric composition on the tensile properties at room and elevated temperatures,and also on the microstructure of Fe_3Al and FeAl alloys has been investigated.Two Fe aluminides were found to be obviously strengthened by all of three elements,but seriously embrittled by Mo and Si.An improvemen over the plasicity of FeAl may be made by adding B,and the fracture surface is variedfrom intergranular to transgranular cleavage type.The room temperature plasticity of the Fe-rich Fe_3Al or Al-rich FeAl is much better than that of the stoichoimetric aluminides.An anoma- lous temperature dependence on the yield strength of Fe_3Al in range of 400 to 500℃ or of FeAl in range of 400 to 500℃ was found.Discussion has been carried out by the aspect of microstructure.展开更多
文摘The effect of Zr on tensile property, microstructure and fracture behaviour of cast Ni 3Al based alloy strengthened with carbides has been studied. It was found that Zr distributes at interdendrites and grain boundaries in the form of ZrC particle and Ni 5Zr eutectic phase which can refine microstructure. Ni 5Zr phase can alleviate the crack initiation at grain boundaries and dendrite boundaries, which helps deformation to be harmonical between matrix and precipitates at elevated temperature.
文摘The effect of hot-rolling processing on microstructure as well as the relationship between the elongated grain structure and tensile properties are investigated. The results indicate that the elongated grain structure influences the tensile properties and creep rupture life of Fe3Al alloy significantly. For the better strength and ductility at RT,a thinner elongated grain structure is desirable. When the elongated grain size is increased, the tensile properties will be decreased. On the other hand, the creeP rupture life at 600℃ is increased with the increase of elongated grain size.
基金Project(2005CB623705-01) supported by the National Key Fundamental Research and Development Program of ChinaProject(MKPT-2004-16ZD) supported by the National 10th Five-Year Plan Program
文摘The effect of homogenization on the hardness,tensile properties,electrical conductivity and microstructure of as-cast Al-6Mg-0.4Mn-0.25Sc-0.12Zr alloy was studied.The results show that during homogenization as-cast studied alloy has obviously hardening effect that is similar to aging hardening behavior in traditional Al alloys.The precipitates are mainly Al3(Sc,Zr)and Al6Mn.When homogenization temperature increases the hardness peak value is declined and the time corresponding to hardness peak value is shortened.The electrical conductivity of the alloy monotonously increases with increasing homogenization temperature and time.The decomposition of the supersaturated solid solution containing Sc and Zr which is formed during direct chilling casting and the precipitation of Al3(Sc,Zr)cause hardness increasing.The depletion of the matrix solid solubility decreases the ability of electron scattering in the alloy,resulting in the electrical conductivity increased.Tensile property result at hot rolling state shows that the optimal homogenization treatment processing is holding at 300-350 ℃ for 6-8 h.
文摘The effect of alloying element such as Mo,Si or B and its stoichoimetric composition on the tensile properties at room and elevated temperatures,and also on the microstructure of Fe_3Al and FeAl alloys has been investigated.Two Fe aluminides were found to be obviously strengthened by all of three elements,but seriously embrittled by Mo and Si.An improvemen over the plasicity of FeAl may be made by adding B,and the fracture surface is variedfrom intergranular to transgranular cleavage type.The room temperature plasticity of the Fe-rich Fe_3Al or Al-rich FeAl is much better than that of the stoichoimetric aluminides.An anoma- lous temperature dependence on the yield strength of Fe_3Al in range of 400 to 500℃ or of FeAl in range of 400 to 500℃ was found.Discussion has been carried out by the aspect of microstructure.
